* Two problems after upgrade tto 2.4.26
@ 2004-04-16 11:18 Martin Knoblauch
0 siblings, 0 replies; 6+ messages in thread
From: Martin Knoblauch @ 2004-04-16 11:18 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3095 bytes --]
Hi,
after upgrading 2.4.23->2.4.26 I am seeing/heariing two problems on
my "HP Omnibookk 6100"":
a) I am getting a lot of double hits when typing (juust see this mmail.
I am not correecting the errors on purpose :-) While I have some
sttupid mistyping habits, double hits all over thhe place did not
belong to them up to now.
b)) Before the upgrade the notebook fan was rarely running at full
speed. AAnd if, only forr short ttimes. Now it kicks in frequeently and
for up to 15 minutes.
Any ideas? I am running SuSE 9.0 with KDE 3.2.0 and XFree 4.3.0.
lspci/lsmod and config included.
mknoblau@mkn5833l1:~> /sbin/lsmod
Module Size Used by Tainted: PF
thermal 6340 0 (unused)
processor 8504 0 [thermal]
vmnet 20432 8
vmmon 34517 5
usbserial 18972 0 (autoclean) (unused)
parport_pc 26184 1 (autoclean)
lp 6336 0 (autoclean)
fan 1504 0 (unused)
button 2476 0 (unused)
battery 5632 0 (unused)
ac 1696 0 (unused)
avma1_cs 2820 0 (unused)
hisax 452700 2 [avma1_cs]
isdn 122432 4 [hisax]
slhc 4816 0 [isdn]
ds 6836 2 [avma1_cs]
yenta_socket 10208 2
pcmcia_core 39680 0 [avma1_cs ds yenta_socket]
printer 7424 0
st 28440 0 (autoclean) (unused)
sg 31292 0 (autoclean)
mousedev 4052 0 (unused)
joydev 5952 0 (unused)
evdev 3904 0 (unused)
input 3136 0 [mousedev joydev evdev]
usb-uhci 22128 0 (unused)
usbcore 58828 1 [usbserial printer usb-uhci]
af_packet 12520 0 (autoclean)
e100 47688 1
ide-scsi 9648 1 (autoclean)
mknoblau@mkn5833l1:~> /sbin/lspci
00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 41)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 01)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
M6 LY
02:03.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1
(rev 12)
02:04.0 Communication controller: Lucent Microelectronics LT WinModem
(rev 02)
02:05.0 CardBus bridge: Texas Instruments PCI1420
02:05.1 CardBus bridge: Texas Instruments PCI1420
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VM
(KM) Ethernet Controller (rev 41)
Cheers
Martin
=====
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
[-- Attachment #2: conf2.4.26 --]
[-- Type: application/octet-stream, Size: 34619 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_PPRO_FENCE=y
# CONFIG_X86_F00F_WORKS_OK is not set
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
# CONFIG_X86_TSC_DISABLE is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
CONFIG_TCIC=y
CONFIG_I82092=y
CONFIG_I82365=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_OOM_KILLER is not set
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_RELAXED_AML=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_IP22 is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#
CONFIG_PNP=y
# CONFIG_ISAPNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=y
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_CISS_MONITOR_THREAD is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=64000
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_STATS=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_LVM=m
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_AMANDA=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
# CONFIG_NET_SCH_DELAY is not set
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_ADMA100 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_PDC4030 is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=4
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_DEBUG_QUEUES is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=8
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=64
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
CONFIG_SCSI_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
CONFIG_EEXPRESS_PRO=m
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
# CONFIG_NE2000 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_FORCEDETH is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_MYRI_SBUS is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
# CONFIG_R8169 is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_ARCNET_COM20020_CS is not set
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCMCIA_XIRTULIP=m
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_AIRONET4500_CS=m
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_BOOL=y
CONFIG_ISDN_PPP=y
# CONFIG_IPPP_FILTER is not set
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
#
# low-level hardware drivers
#
#
# Passive ISDN cards
#
CONFIG_ISDN_DRV_HISAX=m
CONFIG_ISDN_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_ENTERNOW_PCI is not set
# CONFIG_HISAX_DEBUG is not set
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_FRITZ_PCIPNP=m
# CONFIG_USB_AUERISDN is not set
#
# Active ISDN cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_DRV_EICON=y
CONFIG_ISDN_DRV_EICON_DIVAS=m
CONFIG_ISDN_DRV_EICON_OLD=m
CONFIG_ISDN_DRV_EICON_PCI=y
CONFIG_ISDN_DRV_EICON_ISA=y
CONFIG_ISDN_DRV_TPAM=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_EXTENDED=y
CONFIG_SERIAL_MANY_PORTS=y
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
CONFIG_SERIAL_MULTIPORT=y
CONFIG_HUB6=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
# CONFIG_SYNCLINKMP is not set
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
# CONFIG_SCx200_I2C is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
#
# Mice
#
CONFIG_BUSMOUSE=m
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_LOGIBUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=y
CONFIG_PC110_PAD=m
# CONFIG_MK712_MOUSE is not set
#
# Joysticks
#
CONFIG_INPUT_GAMEPORT=m
CONFIG_INPUT_NS558=m
CONFIG_INPUT_LIGHTNING=m
CONFIG_INPUT_PCIGAME=m
CONFIG_INPUT_CS461X=m
CONFIG_INPUT_EMU10K1=m
CONFIG_INPUT_SERIO=m
CONFIG_INPUT_SERPORT=m
#
# Joysticks
#
CONFIG_INPUT_ANALOG=m
CONFIG_INPUT_A3D=m
CONFIG_INPUT_ADI=m
CONFIG_INPUT_COBRA=m
CONFIG_INPUT_GF2K=m
CONFIG_INPUT_GRIP=m
CONFIG_INPUT_INTERACT=m
CONFIG_INPUT_TMDC=m
CONFIG_INPUT_SIDEWINDER=m
CONFIG_INPUT_IFORCE_USB=m
CONFIG_INPUT_IFORCE_232=m
CONFIG_INPUT_WARRIOR=m
CONFIG_INPUT_MAGELLAN=m
CONFIG_INPUT_SPACEORB=m
CONFIG_INPUT_SPACEBALL=m
CONFIG_INPUT_STINGER=m
CONFIG_INPUT_DB9=m
CONFIG_INPUT_GAMECON=m
CONFIG_INPUT_TURBOGRAFX=m
CONFIG_QIC02_TAPE=m
CONFIG_QIC02_DYNCONF=y
#
# Setting runtime QIC-02 configuration is done with qic02conf
#
#
# from the tpqic02-support package. It is available at
#
#
# metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_KCS=m
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_SC520_WDT=m
CONFIG_PCWATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_WAFER_WDT is not set
CONFIG_I810_TCO=m
CONFIG_MIXCOMWD=m
CONFIG_60XX_WDT=m
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
CONFIG_SOFT_WATCHDOG=m
CONFIG_W83877F_WDT=m
CONFIG_WDT=m
CONFIG_WDTPCI=m
CONFIG_WDT_501=y
CONFIG_WDT_501_FAN=y
CONFIG_MACHZ_WDT=m
# CONFIG_AMD7XX_TCO is not set
# CONFIG_SCx200 is not set
# CONFIG_SCx200_GPIO is not set
CONFIG_AMD_RNG=m
CONFIG_INTEL_RNG=m
CONFIG_HW_RANDOM=m
CONFIG_AMD_PM768=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD_K8 is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_ATI is not set
#
# Direct Rendering Manager (XFree86 DRI support)
#
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set
#
# DRM 4.1 drivers
#
CONFIG_DRM_NEW=y
CONFIG_DRM_TDFX=m
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
# CONFIG_DRM_I810_XFREE_41 is not set
CONFIG_DRM_I830=m
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
CONFIG_PCMCIA_SERIAL_CS=m
# CONFIG_SYNCLINK_CS is not set
CONFIG_MWAVE=m
# CONFIG_OBMOUSE is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
CONFIG_QUOTA=y
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_SMB_UNIX=y
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_ZISOFS_FS=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=y
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_HGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_ALI5455 is not set
CONFIG_SOUND_BT878=m
CONFIG_SOUND_CMPCI=m
CONFIG_SOUND_CMPCI_FM=y
CONFIG_SOUND_CMPCI_FMIO=388
CONFIG_SOUND_CMPCI_FMIO=388
CONFIG_SOUND_CMPCI_MIDI=y
CONFIG_SOUND_CMPCI_MPUIO=330
CONFIG_SOUND_CMPCI_JOYSTICK=y
CONFIG_SOUND_CMPCI_CM8738=y
# CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set
CONFIG_SOUND_CMPCI_SPDIFLOOP=y
CONFIG_SOUND_CMPCI_SPEAKERS=2
CONFIG_SOUND_EMU10K1=m
CONFIG_MIDI_EMU10K1=y
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
# CONFIG_SOUND_FORTE is not set
CONFIG_SOUND_ICH=m
CONFIG_SOUND_RME96XX=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_AD1816=m
# CONFIG_SOUND_AD1889 is not set
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
# CONFIG_SOUND_GUS16 is not set
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_PAS=m
# CONFIG_PAS_JOYSTICK is not set
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
# CONFIG_SOUND_KAHLUA is not set
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
CONFIG_SOUND_YMFPCI_LEGACY=y
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_MPU401=y
CONFIG_SOUND_TVMIXER=m
# CONFIG_SOUND_AD1980 is not set
# CONFIG_SOUND_WM97XX is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
# CONFIG_USB_SL811HS_ALT is not set
# CONFIG_USB_SL811HS is not set
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_EMI26 is not set
CONFIG_USB_BLUETOOTH=m
# CONFIG_USB_MIDI is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
CONFIG_USB_WACOM=m
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
#
# USB Imaging devices
#
CONFIG_USB_DC2XX=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_CATC=m
CONFIG_USB_CDCETHER=m
CONFIG_USB_USBNET=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_RIO500=m
CONFIG_USB_AUERSWALD=m
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_FRAME_POINTER=y
CONFIG_LOG_BUF_SHIFT=16
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_FW_LOADER=m
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Two problems after upgrade tto 2.4.26
@ 2004-04-20 11:09 Martin Knoblauch
0 siblings, 0 replies; 6+ messages in thread
From: Martin Knoblauch @ 2004-04-20 11:09 UTC (permalink / raw)
To: linux-kernel
>Hi,
>
>
>after upgrading 2.4.23->2.4.26 I am seeing/heariing two problems on
>my "HP Omnibookk 6100"":
>
>a) I am getting a lot of double hits when typing (juust see this
mmail.
>I am not correecting the errors on purpose :-) While I have some
>sttupid mistyping habits, double hits all over thhe place did not
>belong to them up to now.
>
Short update. Problem a) seems to be acpi-related. When booting with
"acpi=off", the keyboard behaves OK.
Not only the keyboard is affected, but also the mouse. I just did not
see it immediatelly, but with acpi enabled I am loosing pointer events.
>b)) Before the upgrade the notebook fan was rarely running at full
>speed. AAnd if, only forr short ttimes. Now it kicks in frequeently
and
>for up to 15 minutes.
>
Cheers
Martin
=====
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Two problems after upgrade tto 2.4.26
[not found] <A6974D8E5F98D511BB910002A50A6647615F936B@hdsmsx403.hd.intel.com>
@ 2004-04-22 3:08 ` Len Brown
0 siblings, 0 replies; 6+ messages in thread
From: Len Brown @ 2004-04-22 3:08 UTC (permalink / raw)
To: knobi; +Cc: linux-kernel
On Tue, 2004-04-20 at 07:09, Martin Knoblauch wrote:
> >Hi,
> >
> >
> >after upgrading 2.4.23->2.4.26 I am seeing/heariing two problems on
> >my "HP Omnibookk 6100"":
> >
> >a) I am getting a lot of double hits when typing (juust see this
> mmail.
> >I am not correecting the errors on purpose :-) While I have some
> >sttupid mistyping habits, double hits all over thhe place did not
> >belong to them up to now.
> >
>
> Short update. Problem a) seems to be acpi-related. When booting with
> "acpi=off", the keyboard behaves OK.
>
> Not only the keyboard is affected, but also the mouse. I just did not
> see it immediatelly, but with acpi enabled I am loosing pointer
> events.
>
> >b)) Before the upgrade the notebook fan was rarely running at full
> >speed. AAnd if, only forr short ttimes. Now it kicks in frequeently
> and
> >for up to 15 minutes.
> >
Does /proc/interrupts show any acpi events?
Did it in 2.4.23?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Two problems after upgrade tto 2.4.26
@ 2004-04-23 8:22 Martin Knoblauch
0 siblings, 0 replies; 6+ messages in thread
From: Martin Knoblauch @ 2004-04-23 8:22 UTC (permalink / raw)
To: linux-kernel
>> >b)) Before the upgrade the notebook fan was rarely running at full
>> >speed. AAnd if, only forr short ttimes. Now it kicks in frequeently
>> and
>> >for up to 15 minutes.
>> >
>
>Does /proc/interrupts show any acpi events?
>Did it in 2.4.23?
>
Len,
when booting without "acpi=off" it shows indeed some ACPI Interrupts:
cat /proc/interrupts
CPU0
0: 31464 XT-PIC timer
1: 570 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 5 XT-PIC HiSax
8: 2 XT-PIC rtc
9: 1197 XT-PIC acpi
10: 1695 XT-PIC eth0, usb-uhci, Texas Instruments
PCI1420, Texas Instruments PCI1420 (#2)
12: 5460 XT-PIC PS/2 Mouse
14: 18052 XT-PIC ide0
15: 11 XT-PIC ide1
NMI: 0
ERR: 0
When booting with "acpi=off", as well as with 2.4.23 it shown no acpi
interrupts (not really surprising).
Martin
=====
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Two problems after upgrade tto 2.4.26
[not found] <A6974D8E5F98D511BB910002A50A6647615F981B@hdsmsx403.hd.intel.com>
@ 2004-04-25 2:50 ` Len Brown
2004-04-26 10:04 ` Martin Knoblauch
0 siblings, 1 reply; 6+ messages in thread
From: Len Brown @ 2004-04-25 2:50 UTC (permalink / raw)
To: knobi; +Cc: linux-kernel
On Fri, 2004-04-23 at 04:22, Martin Knoblauch wrote:
Re: keyboard/mouse instability with ACPI enabled starting in 2.4.26
> >Does /proc/interrupts show any acpi events?
> >Did it in 2.4.23?
> >
> Len,
>
> some ACPI Interrupts:
>
> cat /proc/interrupts
> CPU0
> 0: 31464 XT-PIC timer
> 1: 570 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 3: 5 XT-PIC HiSax
> 8: 2 XT-PIC rtc
> 9: 1197 XT-PIC acpi
> 10: 1695 XT-PIC eth0, usb-uhci, Texas Instruments
> PCI1420, Texas Instruments PCI1420 (#2)
> 12: 5460 XT-PIC PS/2 Mouse
> 14: 18052 XT-PIC ide0
> 15: 11 XT-PIC ide1
kill acpid and
# cat /proc/acpi/event
to see what the events are.
We we are working on a GPE issue related to spurious
ACPI interrupts right now, but I'd actually expect
2.4.26 to get _fewer_ acpi interrupts than 2.4.25, not more.
Re: fan running more
it would be interesting if you notice a temperature difference
between the releases in /proc/acpi/thermal...
eg.
cat /proc/acpi/thermal_zone/THRM/temperature
temperature: 37 C
FAN isn't always controlled by ACPI. If it is, you'll see it
in the dmesg like this:
ACPI: Power Resource [PFAN] (off)
In either case, it may be that we're running hotter (say idle
isn't working right), or we're running the fan more often by mistake.
For idle, you can compare the /proc/acpi/processor/CPU0/power
file in the two releases to see if one release is getting into
a deeper power-saving state than the other.
Eg, this centrino box isn't getting into C3 because USB is active.
cat /proc/acpi/processor/CPU0/power
active state: C2
default state: C1
bus master activity: ffffffff
states:
C1: promotion[C2] demotion[--] latency[000]
usage[00000010]
*C2: promotion[C3] demotion[C1] latency[001]
usage[00370077]
C3: promotion[--] demotion[C2] latency[085]
usage[00000000]
cheers,
-Len
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Two problems after upgrade tto 2.4.26
2004-04-25 2:50 ` Len Brown
@ 2004-04-26 10:04 ` Martin Knoblauch
0 siblings, 0 replies; 6+ messages in thread
From: Martin Knoblauch @ 2004-04-26 10:04 UTC (permalink / raw)
To: Len Brown; +Cc: linux-kernel
--- Len Brown <len.brown@intel.com> wrote:
> On Fri, 2004-04-23 at 04:22, Martin Knoblauch wrote:
>
> Re: keyboard/mouse instability with ACPI enabled starting in 2.4.26
>
> > >Does /proc/interrupts show any acpi events?
> > >Did it in 2.4.23?
> > >
> > Len,
> >
> > some ACPI Interrupts:
> >
> > cat /proc/interrupts
> > CPU0
> > 0: 31464 XT-PIC timer
> > 1: 570 XT-PIC keyboard
> > 2: 0 XT-PIC cascade
> > 3: 5 XT-PIC HiSax
> > 8: 2 XT-PIC rtc
> > 9: 1197 XT-PIC acpi
> > 10: 1695 XT-PIC eth0, usb-uhci, Texas Instruments
> > PCI1420, Texas Instruments PCI1420 (#2)
> > 12: 5460 XT-PIC PS/2 Mouse
> > 14: 18052 XT-PIC ide0
> > 15: 11 XT-PIC ide1
>
> kill acpid and
> # cat /proc/acpi/event
> to see what the events are.
> We we are working on a GPE issue related to spurious
> ACPI interrupts right now, but I'd actually expect
> 2.4.26 to get _fewer_ acpi interrupts than 2.4.25, not more.
>
Hi Len,
just to make things clear: I never talked about 2.4.25 :-) I went
directly from 2.4.23 to 2.4.26. And ACPI was not set in my 2.4.23
config. Not sure how it got set in 2.4.26? Interesting ...
Anyway, I killed acpid and did a cat on the event stream. All I see
is:
# cat /proc/acpi/event
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
thermal_zone THRM 00000081 00000000
^C
#
During this snapshot, the number of ACPI interrupts went up by about
270. So, it seems not every ACPI interrupt ends in /proc/acpi/event.
In general, the whole thing is pretty hard to reproduce. It seems to
be also depenant on the system load. The keyboard double-hit is much
more likely to happen when running a kernel compile instead of an
otherwise idle system.
> Re: fan running more
> it would be interesting if you notice a temperature difference
> between the releases in /proc/acpi/thermal...
>
> eg.
> cat /proc/acpi/thermal_zone/THRM/temperature
> temperature: 37 C
>
>
> FAN isn't always controlled by ACPI. If it is, you'll see it
> in the dmesg like this:
> ACPI: Power Resource [PFAN] (off)
> In either case, it may be that we're running hotter (say idle
> isn't working right), or we're running the fan more often by mistake.
>
Nope, no such messages in dmesg.
> For idle, you can compare the /proc/acpi/processor/CPU0/power
> file in the two releases to see if one release is getting into
> a deeper power-saving state than the other.
>
> Eg, this centrino box isn't getting into C3 because USB is active.
>
> cat /proc/acpi/processor/CPU0/power
> active state: C2
> default state: C1
> bus master activity: ffffffff
> states:
> C1: promotion[C2] demotion[--] latency[000]
> usage[00000010]
> *C2: promotion[C3] demotion[C1] latency[001]
> usage[00370077]
> C3: promotion[--] demotion[C2] latency[085]
> usage[00000000]
>
>
On my system it looks like this:
# cat /proc/acpi/processor/CPU0/power
active state: C2
default state: C1
bus master activity: 00000000
states:
C1: promotion[C2] demotion[--] latency[000]
usage[00012170]
*C2: promotion[--] demotion[C1] latency[010]
usage[00888388]
C3: <not supported>
> cheers,
> -Len
>
Thanks
Martin
=====
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-04-26 10:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <A6974D8E5F98D511BB910002A50A6647615F936B@hdsmsx403.hd.intel.com>
2004-04-22 3:08 ` Two problems after upgrade tto 2.4.26 Len Brown
[not found] <A6974D8E5F98D511BB910002A50A6647615F981B@hdsmsx403.hd.intel.com>
2004-04-25 2:50 ` Len Brown
2004-04-26 10:04 ` Martin Knoblauch
2004-04-23 8:22 Martin Knoblauch
-- strict thread matches above, loose matches on Subject: below --
2004-04-20 11:09 Martin Knoblauch
2004-04-16 11:18 Martin Knoblauch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox