From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Driver Core patches for 2.6.6
Date: Fri, 14 May 2004 16:07:22 -0700 [thread overview]
Message-ID: <1084576042499@kroah.com> (raw)
In-Reply-To: <1084576042804@kroah.com>
ChangeSet 1.1587.5.16, 2004/05/02 20:29:41-07:00, hannal@us.ibm.com
[PATCH] add class support to drivers/block/paride/pt.c
This patch adds class support to pt.c which "the high-level driver for parallel
port ATAPI tape drives based on chips supported by the paride module." Which I
dont have in order to test.
I have verified it compiles but can not test it. If someone who has the
hardware could I would appreciate it.
drivers/block/paride/pt.c | 54 ++++++++++++++++++++++++++++++++++++++--------
1 files changed, 45 insertions(+), 9 deletions(-)
diff -Nru a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
--- a/drivers/block/paride/pt.c Fri May 14 15:58:58 2004
+++ b/drivers/block/paride/pt.c Fri May 14 15:58:58 2004
@@ -145,6 +145,7 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/mtio.h>
+#include <linux/device.h>
#include <asm/uaccess.h>
@@ -260,6 +261,9 @@
.release = pt_release,
};
+/* sysfs class support */
+static struct class_simple *pt_class;
+
static inline int status_reg(struct pi_adapter *pi)
{
return pi_read_regr(pi, 1, 6);
@@ -959,33 +963,62 @@
static int __init pt_init(void)
{
- int unit;
+ int unit, err = 0;
- if (disable)
- return -1;
+ if (disable) {
+ err = -1;
+ goto out;
+ }
- if (pt_detect())
- return -1;
+ if (pt_detect()) {
+ err = -1;
+ goto out;
+ }
if (register_chrdev(major, name, &pt_fops)) {
printk("pt_init: unable to get major number %d\n", major);
for (unit = 0; unit < PT_UNITS; unit++)
if (pt[unit].present)
pi_release(pt[unit].pi);
- return -1;
+ err = -1;
+ goto out;
+ }
+ pt_class = class_simple_create(THIS_MODULE, "pt");
+ if (IS_ERR(pt_class)) {
+ err = PTR_ERR(pt_class);
+ goto out_chrdev;
}
devfs_mk_dir("pt");
for (unit = 0; unit < PT_UNITS; unit++)
if (pt[unit].present) {
- devfs_mk_cdev(MKDEV(major, unit),
+ class_simple_device_add(pt_class, MKDEV(major, unit),
+ NULL, "pt%d", unit);
+ err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR,
"pt/%d", unit);
- devfs_mk_cdev(MKDEV(major, unit + 128),
+ if (err) {
+ class_simple_device_remove(MKDEV(major, unit));
+ goto out_class;
+ }
+ class_simple_device_add(pt_class, MKDEV(major, unit + 128),
+ NULL, "pt%dn", unit);
+ err = devfs_mk_cdev(MKDEV(major, unit + 128),
S_IFCHR | S_IRUSR | S_IWUSR,
"pt/%dn", unit);
+ if (err) {
+ class_simple_device_remove(MKDEV(major, unit + 128));
+ goto out_class;
+ }
}
- return 0;
+ goto out;
+
+out_class:
+ class_simple_destroy(pt_class);
+out_chrdev:
+ unregister_chrdev(major, "pt");
+out:
+ return err;
}
static void __exit pt_exit(void)
@@ -993,9 +1026,12 @@
int unit;
for (unit = 0; unit < PT_UNITS; unit++)
if (pt[unit].present) {
+ class_simple_device_remove(MKDEV(major, unit));
devfs_remove("pt/%d", unit);
+ class_simple_device_remove(MKDEV(major, unit + 128));
devfs_remove("pt/%dn", unit);
}
+ class_simple_destroy(pt_class);
devfs_remove("pt");
unregister_chrdev(major, name);
for (unit = 0; unit < PT_UNITS; unit++)
next prev parent reply other threads:[~2004-05-15 1:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-14 23:06 [BK PATCH] Driver Core patches for 2.6.6 Greg KH
2004-05-14 23:07 ` [PATCH] " Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH [this message]
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:07 ` Greg KH
2004-05-14 23:24 ` zombies with AMD64 and 32 bit userspace with 2.6 David Lang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1084576042499@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox