From: Andrey Panin <pazke@donpac.ru>
To: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: [PATCH 7/13] 2.6.7-rc1-mm1, Port PnP BIOS driver to new DMI probing
Date: Fri, 28 May 2004 15:55:49 +0400 [thread overview]
Message-ID: <10857453492070@donpac.ru> (raw)
In-Reply-To: <10857453453701@donpac.ru>
diff -urpN -X /usr/share/dontdiff linux-2.6.7-rc1-mm1.vanilla/arch/i386/kernel/dmi_scan.c linux-2.6.7-rc1-mm1/arch/i386/kernel/dmi_scan.c
--- linux-2.6.7-rc1-mm1.vanilla/arch/i386/kernel/dmi_scan.c Wed Apr 28 23:59:31 2004
+++ linux-2.6.7-rc1-mm1/arch/i386/kernel/dmi_scan.c Wed Apr 28 23:59:39 2004
@@ -279,17 +279,6 @@ static __init int reset_videomode_after_
}
#endif
-/*
- * Exploding PnPBIOS. Don't yet know if its the BIOS or us for
- * some entries
- */
-
-static __init int exploding_pnp_bios(struct dmi_system_id *d)
-{
- printk(KERN_WARNING "%s detected. Disabling PnPBIOS\n", d->ident);
- dmi_broken |= BROKEN_PNP_BIOS;
- return 0;
-}
static __init int acer_cpufreq_pst(struct dmi_system_id *d)
{
@@ -386,17 +375,6 @@ static __initdata struct dmi_system_id d
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
} },
- { exploding_pnp_bios, "Higraded P14H", { /* PnPBIOS GPF on boot */
- DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
- DMI_MATCH(DMI_BIOS_VERSION, "07.00T"),
- DMI_MATCH(DMI_SYS_VENDOR, "Higraded"),
- DMI_MATCH(DMI_PRODUCT_NAME, "P14H")
- } },
- { exploding_pnp_bios, "ASUS P4P800", { /* PnPBIOS GPF on boot */
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
- DMI_MATCH(DMI_BOARD_NAME, "P4P800"),
- } },
-
/* Machines which have problems handling enabled local APICs */
{ local_apic_kills_bios, "Dell Inspiron", {
diff -urpN -X /usr/share/dontdiff linux-2.6.7-rc1-mm1.vanilla/drivers/pnp/pnpbios/core.c linux-2.6.7-rc1-mm1/drivers/pnp/pnpbios/core.c
--- linux-2.6.7-rc1-mm1.vanilla/drivers/pnp/pnpbios/core.c Wed Apr 28 22:56:01 2004
+++ linux-2.6.7-rc1-mm1/drivers/pnp/pnpbios/core.c Wed Apr 28 23:59:39 2004
@@ -59,6 +59,7 @@
#include <linux/kmod.h>
#include <linux/completion.h>
#include <linux/spinlock.h>
+#include <linux/dmi.h>
#include <asm/page.h>
#include <asm/desc.h>
@@ -498,10 +499,39 @@ int __init pnpbios_probe_system(void)
return 0;
}
+static int __init exploding_pnp_bios(struct dmi_system_id *d)
+{
+ printk(KERN_WARNING "%s detected. Disabling PnPBIOS\n", d->ident);
+ return 0;
+}
+
+static struct dmi_system_id pnpbios_dmi_table[] = {
+ { /* PnPBIOS GPF on boot */
+ .callback = exploding_pnp_bios,
+ .ident = "Higraded P14H",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "07.00T"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Higraded"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P14H"),
+ },
+ },
+ { /* PnPBIOS GPF on boot */
+ .callback = exploding_pnp_bios,
+ .ident = "ASUS P4P800",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_BOARD_NAME, "P4P800"),
+ },
+ },
+ { }
+};
+
int __init pnpbios_init(void)
{
int ret;
- if(pnpbios_disabled || (dmi_broken & BROKEN_PNP_BIOS)) {
+
+ if (pnpbios_disabled || dmi_check_system(pnpbios_dmi_table)) {
printk(KERN_INFO "PnPBIOS: Disabled\n");
return -ENODEV;
}
prev parent reply other threads:[~2004-05-28 12:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-28 11:55 [PATCH 0/13] 2.6.7-rc1-mm1, Simplify DMI matching data Andrey Panin
2004-05-28 11:55 ` [PATCH 1/13] 2.6.7-rc1-mm1, Export DMI probe function Andrey Panin
2004-05-28 11:55 ` [PATCH 2/13] 2.6.7-rc1-mm1, Codingstyle and whitespace cleanups Andrey Panin
2004-05-28 11:55 ` [PATCH 3/13] 2.6.7-rc1-mm1, Port sonypi driver to new DMI probing Andrey Panin
2004-05-28 11:55 ` [PATCH 4/13] 2.6.7-rc1-mm1, Port APM BIOS " Andrey Panin
2004-05-28 11:55 ` [PATCH 5/13] 2.6.7-rc1-mm1, Port HP Pavilion irq routing quirk " Andrey Panin
2004-05-28 11:55 ` [PATCH 6/13] 2.6.7-rc1-mm1, Port PIIX4 I2C driver " Andrey Panin
2004-05-28 11:55 ` Andrey Panin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10857453492070@donpac.ru \
--to=pazke@donpac.ru \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox