From: James Bottomley <James.Bottomley@steeleye.com>
To: Jamey Hicks <jamey.hicks@hp.com>
Cc: Ian Molton <spyro@f2s.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
greg@kroah.com, tony@atomide.com, david-b@pacbell.net,
joshua@joshuawise.com
Subject: Re: DMA API issues
Date: 18 Jun 2004 14:41:04 -0500 [thread overview]
Message-ID: <1087587669.1752.147.camel@mulgrave> (raw)
In-Reply-To: <40D340FB.3080309@hp.com>
On Fri, 2004-06-18 at 14:22, Jamey Hicks wrote:
> It's really not a question of laziness. The ASICs we are interested in
> implement OHCI, so I think the core OHCI driver should work unmodified.
> OHCI driver allocates dma_pools for managing endpoint descriptors (ED)
> and transaction descriptors (TD). I expect that the driver wrapper that
> initializes the OHCI controller driver will create dma_pools drawing
> from the ASIC's private SRAM. The OHCI driver uses
> dma_{alloc,free}_coherent to manage the space used for the top level
> control structure shared between the driver and the controller
> hardware. This also needs to be allocated in the SRAM. Finally, in
> drivers/usb/core/usb.c, the USB drivers call dma_map_single and
> dma_unmap_single given pointers to transfer buffers allocated by the USB
> device drivers. If the USB device is a network device (as it is on the
> iPAQ), the transfer buffers are allocated via dev_alloc_skb.
Well, I thought it was something like that. So the problem could be
solved simply by rejigging ohci to export td_alloc and td_free as
overrideable methods?
Your map and unmap single could also be handled this way: with usb
specific overrides that default to dma_map_single. None of this would
cause much perturbation in usb, and it would give you everthing you
need.
I assume your implementation of dma_map_single is simply to copy the
memory into the on chip area?
> I really think this is a DMA API implementation issue. The problem
> touches more than the USB drivers. I say implementation because the DMA
> API already takes struct device, so the public interface would not have
> to change or would not have to change much. However, we would like to
> be able to provide device-specific implementations of the dma
> operations. One way to implement this would be a pointer to
> dma_operations from struct device.
The DMA API is highly platform specific. It basically embodies a
contract between the platform and its attached busses. It wasn't
designed to embody a contract between two busses (or in this case, a bus
and its implementing driver).
James
next prev parent reply other threads:[~2004-06-18 19:44 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-18 18:20 DMA API issues James Bottomley
2004-06-18 18:35 ` Ian Molton
2004-06-18 18:52 ` James Bottomley
2004-06-18 18:57 ` Ian Molton
2004-06-18 19:20 ` David Brownell
2004-06-18 19:44 ` Ian Molton
2004-06-18 19:57 ` James Bottomley
2004-06-18 21:08 ` David Brownell
2004-06-18 21:14 ` James Bottomley
2004-06-18 22:38 ` David Brownell
2004-06-18 23:07 ` James Bottomley
2004-06-18 23:31 ` Ian Molton
2004-06-19 18:23 ` David Brownell
2004-06-19 20:41 ` Russell King
2004-06-19 21:46 ` James Bottomley
2004-06-19 22:49 ` Ian Molton
2004-06-20 13:37 ` James Bottomley
2004-06-20 15:50 ` Ian Molton
2004-06-20 16:26 ` Jeff Garzik
2004-06-20 16:57 ` Ian Molton
2004-06-20 20:15 ` David Brownell
2004-06-20 16:46 ` James Bottomley
2004-06-20 18:02 ` Oliver Neukum
2004-06-20 19:27 ` James Bottomley
2004-06-20 19:34 ` Oliver Neukum
2004-06-20 20:07 ` David Brownell
2004-06-20 20:18 ` David Brownell
2004-06-20 20:02 ` David Brownell
2004-06-18 23:25 ` Ian Molton
2004-06-18 23:29 ` James Bottomley
2004-06-18 23:51 ` Ian Molton
2004-06-19 0:04 ` James Bottomley
2004-06-19 0:14 ` Ian Molton
2004-06-19 3:49 ` James Bottomley
2004-06-20 20:59 ` Jamey Hicks
2004-06-19 15:11 ` DMA API issues... summary Ian Molton
2004-06-20 20:49 ` Joshua Wise
2004-06-18 19:30 ` DMA API issues James Bottomley
2004-06-18 19:56 ` Ian Molton
2004-06-18 19:22 ` Jamey Hicks
2004-06-18 19:41 ` James Bottomley [this message]
2004-06-18 20:02 ` Oliver Neukum
2004-06-18 20:07 ` James Bottomley
2004-06-18 20:14 ` Benjamin Herrenschmidt
2004-06-18 20:24 ` James Bottomley
2004-06-18 21:20 ` Russell King
2004-06-18 23:20 ` Ian Molton
2004-06-20 18:25 ` Deepak Saxena
-- strict thread matches above, loose matches on Subject: below --
2004-06-18 16:59 Ian Molton
2004-06-18 18:07 ` Matt Porter
2004-06-18 18:19 ` Ian Molton
2004-06-18 18:58 ` Matt Porter
2004-06-18 18:33 ` Jamey Hicks
2004-06-18 19:21 ` Matt Porter
2004-06-18 19:43 ` Russell King
2004-06-21 13:35 ` Takashi Iwai
2004-06-21 23:08 ` Russell King
2004-06-22 2:06 ` Jeff Garzik
2004-06-22 3:18 ` Linus Torvalds
2004-06-22 3:26 ` Linus Torvalds
2004-06-22 10:40 ` Takashi Iwai
2004-06-23 12:34 ` Russell King
2004-06-23 15:36 ` Takashi Iwai
2004-06-23 15:44 ` Russell King
2004-06-23 16:01 ` Takashi Iwai
2004-06-23 16:10 ` Russell King
2004-06-22 10:48 ` Takashi Iwai
2004-06-18 19:48 ` Jamey Hicks
2004-06-18 21:08 ` Jeff Garzik
2004-06-18 22:12 ` Richard B. Johnson
2004-06-18 23:27 ` Ian Molton
2004-06-18 23:26 ` Ian Molton
2004-06-18 23:30 ` James Bottomley
2004-06-18 23:32 ` Jeff Garzik
[not found] ` <20040619005714.37b68453.spyro@f2s.com>
[not found] ` <40D3838B.2070608@pobox.com>
[not found] ` <20040619011621.4491600a.spyro@f2s.com>
[not found] ` <40D3872F.5010007@pobox.com>
2004-06-19 0:34 ` Ian Molton
2004-06-19 21:15 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1087587669.1752.147.camel@mulgrave \
--to=james.bottomley@steeleye.com \
--cc=david-b@pacbell.net \
--cc=greg@kroah.com \
--cc=jamey.hicks@hp.com \
--cc=joshua@joshuawise.com \
--cc=linux-kernel@vger.kernel.org \
--cc=spyro@f2s.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox