Re: Linux 2.6.8-rc2

[Martin Schlemmer <azarah@nosferatu.za.org>]

[-- Attachment #1: Type: text/plain, Size: 1295 bytes --]

On Sun, 2004-07-18 at 13:12, Jurgen Kramer wrote:
> On Sun, 2004-07-18 at 07:41, Linus Torvalds wrote:
> > MTD updates, i2c updates and some USB updates, and a lot of small stuff
> > (sparse cleanups and fixes from Al etc).
> > 
> > 		Linus
> > 
> Just gave it a try. My EHCI controller is still failing (Asus P4C800-E
> i875p) as in the 2.6.7-mm series.
> 
> <snip>
> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 1010001)
> ehci_hcd 0000:00:1d.7: can't reset
> ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -95
> ehci_hcd: probe of 0000:00:1d.7 failed with error -95
> USB Universal Host Controller Interface driver v2.2
> <snip>
> 
> Full dmesg output attached.
> 

I have a P4C800-E (DLX) as well, but it is working fine.
The big differences I see is:
1) You have the 3Com network device where I have the E1000
   (I thought all P4C800-E have E1000, where the smaller ones,
    P4C800, P4C800-DLX have 3Com ??)
2) I use Interrupt Vectors, where you seem not to?

I am on bios 1016 (latest stable for P4C800-E DLX, while I
see there is a 1017 beta 002).

Not sure if you want my .config to compare?


Cheers,

-- 
Martin Schlemmer

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]