From: Brian Beattie <beattie@beattie-home.net>
To: linux-kernel@vger.kernel.org
Subject: Sandisk 256MB Compact Flash (SDCFH-256) hangs on access (2.4.26)
Date: Thu, 26 Aug 2004 15:22:21 -0400 [thread overview]
Message-ID: <1093548140.2903.35.camel@kokopelli> (raw)
If there is a better forum for this question, please let me know.
I'm running Debian Sarge/2.4.26-1-i686-smp, trying to access this
compact flash using a CF/IDE adapter from ACS (ACS-CF-IDEToCFA). This
works fine for every other CF I have tried (128 and 64). I have a
number of these parts and they all act the same and they work fine in an
PCMCIA/CF adapter and a USB CF reader. I have set up what I think is
the simplest case, I have run fdisk and mkfs on another machine using
the PCMCIA adapter.
When I try to mount the CF it hangs and I start getting "lost
interrupt", does anybody have experience or clues that might help me?
------------------------
Linux version 2.4.26-1-686-smp (horms@tabatha) (gcc version 3.3.4
(Debian 1:3.34
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000f7efd000 (usable)
BIOS-e820: 00000000f7efd000 - 00000000f7f00000 (ACPI NVS)
BIOS-e820: 00000000f7f00000 - 00000000f7f80000 (usable)
BIOS-e820: 00000000f7f80000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
3071MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6810
...
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hda: SanDisk SDCFH-256, CFA DISK drive
hdc: CD-232E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-cdrom driver.
hdc: ATAPI 32X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
...
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Eagle3:~# sfdisk -l /dev/hda
hda: attached ide-disk driver.
hda: 501760 sectors (257 MB) w/1KiB Cache, CHS=980/16/32
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Disk /dev/hda: 980 cylinders, 16 heads, 32 sectors/track
Units = cylinders of 262144 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 0+ 640 641- 164080 83 Linux
/dev/hda2 641 673 33 8448 83 Linux
/dev/hda3 674 979 306 78336 83 Linux
/dev/hda4 0 - 0 0 0 Empty
Eagle3:~# mount /dev/hda1 /mnt/tmp
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hda: lost interrupt
hda: lost interrupt
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
ide0: reset: master: error (0x00?)
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
--
Brian Beattie LFS12947 | "Honor isn't about making the right choices.
beattie@beattie-home.net | It's about dealing with the consequences."
www.beattie-home.net | -- Midori Koto
next reply other threads:[~2004-08-26 19:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-26 19:22 Brian Beattie [this message]
2004-08-27 14:25 ` Sandisk 256MB Compact Flash (SDCFH-256) hangs on access (2.4.26) Paulo Marques
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1093548140.2903.35.camel@kokopelli \
--to=beattie@beattie-home.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox