[BK PATCH] More USB patches for 2.6.10-rc1

[BK PATCH] More USB patches for 2.6.10-rc1

[Greg KH]

Hi,

Here are some more USB fixes and changes for 2.6.10-rc1.  All of these
patches should have been in the past few -mm releases.

Big fix here is some PCI suspend fixes (yeah, it came along with some
USB suspend fixes, so it all got mushed together...)

Please pull from:
	bk://kernel.bkbits.net/gregkh/linux/usb-2.6

Patches will be posted to linux-usb-devel as a follow-up thread for
those who want to see them.

thanks,

greg k-h

 Documentation/usb/usb-serial.txt  |   56 +
 MAINTAINERS                       |   16 
 drivers/block/Kconfig             |    2 
 drivers/block/ub.c                |   62 +
 drivers/pci/pci-driver.c          |    4 
 drivers/pci/quirks.c              |    6 
 drivers/usb/core/devio.c          |    8 
 drivers/usb/core/hcd-pci.c        |  100 ++-
 drivers/usb/core/hcd.c            |   61 +
 drivers/usb/core/hcd.h            |   10 
 drivers/usb/core/hub.c            |   36 -
 drivers/usb/core/message.c        |   25 
 drivers/usb/core/usb.c            |    8 
 drivers/usb/gadget/Makefile       |    2 
 drivers/usb/gadget/dummy_hcd.c    |  452 +++++++------
 drivers/usb/gadget/ether.c        |    4 
 drivers/usb/gadget/file_storage.c |    4 
 drivers/usb/gadget/serial.c       |  875 ++++++++++++++++++++-------
 drivers/usb/gadget/zero.c         |    2 
 drivers/usb/host/ehci-hcd.c       |  146 ++--
 drivers/usb/host/ehci-hub.c       |   48 -
 drivers/usb/host/ehci-mem.c       |    5 
 drivers/usb/host/ehci-q.c         |    3 
 drivers/usb/host/ehci-sched.c     |    7 
 drivers/usb/host/ehci.h           |   13 
 drivers/usb/host/ohci-dbg.c       |  144 ++--
 drivers/usb/host/ohci-hcd.c       |  110 +--
 drivers/usb/host/ohci-hub.c       |  111 +--
 drivers/usb/host/ohci-lh7a404.c   |   10 
 drivers/usb/host/ohci-mem.c       |   11 
 drivers/usb/host/ohci-omap.c      |   34 -
 drivers/usb/host/ohci-pci.c       |    1 
 drivers/usb/host/ohci-pxa27x.c    |   10 
 drivers/usb/host/ohci-q.c         |  189 +++--
 drivers/usb/host/ohci-sa1111.c    |   10 
 drivers/usb/host/ohci.h           |  262 +++++---
 drivers/usb/host/uhci-hcd.c       |   42 -
 drivers/usb/host/uhci-hcd.h       |    2 
 drivers/usb/host/uhci-hub.c       |    2 
 drivers/usb/input/hid-core.c      |   11 
 drivers/usb/input/powermate.c     |    2 
 drivers/usb/media/stv680.c        |    6 
 drivers/usb/media/usbvideo.c      |   79 --
 drivers/usb/net/Kconfig           |    8 
 drivers/usb/net/catc.c            |    4 
 drivers/usb/net/usbnet.c          |   18 
 drivers/usb/serial/Kconfig        |   15 
 drivers/usb/serial/Makefile       |    1 
 drivers/usb/serial/cypress_m8.c   | 1230 +++++++++++++++++++++++++++++++++++++-
 drivers/usb/serial/cypress_m8.h   |   55 +
 drivers/usb/serial/pl2303.c       |    3 
 drivers/usb/serial/pl2303.h       |   14 
 drivers/usb/serial/usb-serial.c   |  111 ++-
 drivers/usb/serial/usb-serial.h   |   16 
 54 files changed, 3301 insertions(+), 1165 deletions(-)
-----

<arjan:fenrus.demon.nl>:
  o USB: remove dead code in usb video

<lmendez19:austin.rr.com>:
  o cypress_m8: add usb-serial driver 'cypress_m8' to kernel tree
  o usb-serial: add interrupt out support and improved debug messages
  o hid-core: add two devices to device blacklist

Adrian Bunk:
  o USB ohci-dbg.c: remove an unused function
  o USB stv680.c: remove an unused function

Alan Stern:
  o usbcore: add comment to updated hcd.h
  o dummy-hcd: removal hcd release
  o Non-PCI OHCI drivers: remove hcd release
  o USB PCI drivers: hcd release changes
  o usbcore: Make the core release hcd structures
  o dummy-hcd: Refactor startup and shutdown
  o dummy_hcd: minor fixups
  o UHCI: Use a sane timeout for device initialization
  o USB: Dequeuing of root-hub URBs
  o UHCI: Workaround for broken remote wakeup

Arnaldo Carvalho de Melo:
  o USB: add id for Siemens x65 series of mobiles to pl2303 driver

David Brownell:
  o USB: ohci-omap, updates for omap1510/5910 and innovator
  o USB: usb gadget serial driver v2.0
  o USB: usb gadget drivers, minor tweaks
  o USB: ohci, hooks for big-endian registers
  o USB: ohci, remove pre-byteswapped constants
  o USB: clean up error messages
  o USB: fix bug
  o USB: fix ohci_restart warning
  o usbcore, diagnostic tweaks
  o OHCI suspend/resume updates (minor)
  o EHCI suspend/resume updates
  o PCI: make pci_save_state() only happen when no suspend()
  o usbcore and system sleep states

Greg Kroah-Hartman:
  o USB: fix sparse warnings in cypress_m8 driver
  o USB: fix up pl2303 device ids that ended up getting duplicated
  o USB: fix up serial object reference count bug on error path

Jonathan McDowell:
  o USB: add KC2190 support for usbnet

Karsten Wiese:
  o UHCI: Convert remainder to bitwise-and

Nishanth Aravamudan:
  o pci/quirks: replace schedule_timeout() with msleep()

Pete Zaitcev:
  o USB: Patch for ub

Thomas Gleixner:
  o Lock initializer unifying Batch 2 (USB)

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.3, 2004/11/04 10:12:44-08:00, kay.sievers@vrfy.org

[PATCH] add the physical device and the bus to the hotplug environment

Add the sysfs path of the physical device to the hotplug event of class
and block devices. This should solve the userspace issue not to know if
the device is a virtual one and the "device" symlink will never be created,
but we sit there and wait for it to show up not knowing when we should
give up.

Also the bus name is added to the hotplug event, so we don't need to
reverse lookup in the /sys/bus/* directory which bus our physical
device belongs to. This is e.g. the value matched against the BUS= key,
that may be used in an udev rule.

This is a PCI network card:
  ACTION=add
  SUBSYSTEM=net
  DEVPATH=/class/net/eth0
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:01.0
  PHYSDEVBUS=pci
  INTERFACE=eth0
  SEQNUM=827
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/

This is a IDE CDROM:
  ACTION=add
  SUBSYSTEM=block
  DEVPATH=/block/hdc
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1f.1/ide1/1.0
  PHYSDEVBUS=ide
  SEQNUM=1017
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/

This is an USB-stick partition:
  ACTION=add
  SUBSYSTEM=block
  DEVPATH=/block/sda/sda1
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host1/target1:0:0/1:0:0:0
  PHYSDEVBUS=scsi
  SEQNUM=1032
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/


Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/base/class.c  |   26 ++++++++++++++++++++++++++
 drivers/block/genhd.c |   40 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 65 insertions(+), 1 deletion(-)


diff -Nru a/drivers/base/class.c b/drivers/base/class.c
--- a/drivers/base/class.c	2004-11-04 16:31:01 -08:00
+++ b/drivers/base/class.c	2004-11-04 16:31:01 -08:00
@@ -283,8 +283,34 @@
 {
 	struct class_device *class_dev = to_class_dev(kobj);
 	int retval = 0;
+	int i = 0;
+	int length = 0;
 
 	pr_debug("%s - name = %s\n", __FUNCTION__, class_dev->class_id);
+
+	if (class_dev->dev) {
+		/* add physical device, backing this device  */
+		struct device *dev = class_dev->dev;
+		char *path = kobject_get_path(&dev->kobj, GFP_KERNEL);
+
+		add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size,
+				    &length, "PHYSDEVPATH=%s", path);
+		kfree(path);
+
+		/* add bus name of physical device */
+		if (dev->bus)
+			add_hotplug_env_var(envp, num_envp, &i,
+					    buffer, buffer_size, &length,
+					    "PHYSDEVBUS=%s", dev->bus->name);
+
+		/* terminate, set to next free slot, shrink available space */
+		envp[i] = NULL;
+		envp = &envp[i];
+		num_envp -= i;
+		buffer = &buffer[length];
+		buffer_size -= length;
+	}
+
 	if (class_dev->class->hotplug) {
 		/* have the bus specific function add its stuff */
 		retval = class_dev->class->hotplug (class_dev, envp, num_envp,
diff -Nru a/drivers/block/genhd.c b/drivers/block/genhd.c
--- a/drivers/block/genhd.c	2004-11-04 16:31:01 -08:00
+++ b/drivers/block/genhd.c	2004-11-04 16:31:01 -08:00
@@ -438,8 +438,46 @@
 	return ((ktype == &ktype_block) || (ktype == &ktype_part));
 }
 
+static int block_hotplug(struct kset *kset, struct kobject *kobj, char **envp,
+			 int num_envp, char *buffer, int buffer_size)
+{
+	struct device *dev = NULL;
+	struct kobj_type *ktype = get_ktype(kobj);
+	int length = 0;
+	int i = 0;
+
+	/* get physical device backing disk or partition */
+	if (ktype == &ktype_block) {
+		struct gendisk *disk = container_of(kobj, struct gendisk, kobj);
+		dev = disk->driverfs_dev;
+	} else if (ktype == &ktype_part) {
+		struct gendisk *disk = container_of(kobj->parent, struct gendisk, kobj);
+		dev = disk->driverfs_dev;
+	}
+
+	if (dev) {
+		/* add physical device, backing this device  */
+		char *path = kobject_get_path(&dev->kobj, GFP_KERNEL);
+
+		add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size,
+				    &length, "PHYSDEVPATH=%s", path);
+		kfree(path);
+
+		/* add bus name of physical device */
+		if (dev->bus)
+			add_hotplug_env_var(envp, num_envp, &i,
+					    buffer, buffer_size, &length,
+					    "PHYSDEVBUS=%s", dev->bus->name);
+
+		envp[i] = NULL;
+	}
+
+	return 0;
+}
+
 static struct kset_hotplug_ops block_hotplug_ops = {
-	.filter	= block_hotplug_filter,
+	.filter		= block_hotplug_filter,
+	.hotplug	= block_hotplug,
 };
 
 /* declare block_subsys. */

[PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.1, 2004/11/03 13:50:35-08:00, maneesh@in.ibm.com

[PATCH] sysfs: fix sysfs backing store error path confusion

o sysfs_new_dirent to retrun 0 if kmalloc fails. Thanks to Milton Miller
  for spotting this.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/dir.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)


diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
--- a/fs/sysfs/dir.c	2004-11-04 16:31:16 -08:00
+++ b/fs/sysfs/dir.c	2004-11-04 16:31:16 -08:00
@@ -56,7 +56,7 @@
 
 	sd = sysfs_new_dirent(parent_sd, element);
 	if (!sd)
-		return -ENOMEM;
+		return 0;
 
 	sd->s_mode = mode;
 	sd->s_type = type;

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.2, 2004/11/03 13:50:47-08:00, bunk@stusta.de

[PATCH] small sysfs cleanups

The patch below does the following cleanups for the sysfs code:
- remove the unused global function sysfs_mknod
- make some structs and functions static

Please check whether this patch is correct, or whether some of the
things I made static should be used globally in the forseeable future.


Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/dir.c     |    2 +-
 fs/sysfs/inode.c   |    5 -----
 fs/sysfs/mount.c   |    2 +-
 fs/sysfs/symlink.c |   17 +++++++++--------
 fs/sysfs/sysfs.h   |    2 --
 5 files changed, 11 insertions(+), 17 deletions(-)


diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
--- a/fs/sysfs/dir.c	2004-11-04 16:31:09 -08:00
+++ b/fs/sysfs/dir.c	2004-11-04 16:31:09 -08:00
@@ -201,7 +201,7 @@
 	return err;
 }
 
-struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
+static struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
 				struct nameidata *nd)
 {
 	struct sysfs_dirent * parent_sd = dentry->d_parent->d_fsdata;
diff -Nru a/fs/sysfs/inode.c b/fs/sysfs/inode.c
--- a/fs/sysfs/inode.c	2004-11-04 16:31:09 -08:00
+++ b/fs/sysfs/inode.c	2004-11-04 16:31:09 -08:00
@@ -76,11 +76,6 @@
 	return error;
 }
 
-int sysfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
-{
-	return sysfs_create(dentry, mode, NULL);
-}
-
 struct dentry * sysfs_get_dentry(struct dentry * parent, const char * name)
 {
 	struct qstr qstr;
diff -Nru a/fs/sysfs/mount.c b/fs/sysfs/mount.c
--- a/fs/sysfs/mount.c	2004-11-04 16:31:09 -08:00
+++ b/fs/sysfs/mount.c	2004-11-04 16:31:09 -08:00
@@ -22,7 +22,7 @@
 	.drop_inode	= generic_delete_inode,
 };
 
-struct sysfs_dirent sysfs_root = {
+static struct sysfs_dirent sysfs_root = {
 	.s_sibling	= LIST_HEAD_INIT(sysfs_root.s_sibling),
 	.s_children	= LIST_HEAD_INIT(sysfs_root.s_children),
 	.s_element	= NULL,
diff -Nru a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
--- a/fs/sysfs/symlink.c	2004-11-04 16:31:09 -08:00
+++ b/fs/sysfs/symlink.c	2004-11-04 16:31:09 -08:00
@@ -9,12 +9,6 @@
 
 #include "sysfs.h"
 
-struct inode_operations sysfs_symlink_inode_operations = {
-	.readlink = generic_readlink,
-	.follow_link = sysfs_follow_link,
-	.put_link = sysfs_put_link,
-};
-
 static int object_depth(struct kobject * kobj)
 {
 	struct kobject * p = kobj;
@@ -157,7 +151,7 @@
 
 }
 
-int sysfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+static int sysfs_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
 	int error = -ENOMEM;
 	unsigned long page = get_zeroed_page(GFP_KERNEL);
@@ -167,12 +161,19 @@
 	return 0;
 }
 
-void sysfs_put_link(struct dentry *dentry, struct nameidata *nd)
+static void sysfs_put_link(struct dentry *dentry, struct nameidata *nd)
 {
 	char *page = nd_get_link(nd);
 	if (!IS_ERR(page))
 		free_page((unsigned long)page);
 }
+
+struct inode_operations sysfs_symlink_inode_operations = {
+	.readlink = generic_readlink,
+	.follow_link = sysfs_follow_link,
+	.put_link = sysfs_put_link,
+};
+
 
 EXPORT_SYMBOL_GPL(sysfs_create_link);
 EXPORT_SYMBOL_GPL(sysfs_remove_link);
diff -Nru a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
--- a/fs/sysfs/sysfs.h	2004-11-04 16:31:09 -08:00
+++ b/fs/sysfs/sysfs.h	2004-11-04 16:31:09 -08:00
@@ -17,8 +17,6 @@
 extern const unsigned char * sysfs_get_name(struct sysfs_dirent *sd);
 extern void sysfs_drop_dentry(struct sysfs_dirent *sd, struct dentry *parent);
 
-extern int sysfs_follow_link(struct dentry *, struct nameidata *);
-extern void sysfs_put_link(struct dentry *, struct nameidata *);
 extern struct rw_semaphore sysfs_rename_sem;
 extern struct super_block * sysfs_sb;
 extern struct file_operations sysfs_dir_operations;

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.8, 2004/11/04 10:57:45-08:00, tj@home-tj.org

[PATCH] driver-model: device_add() error path reference counting fix

 df_05_device_add_ref_fix.patch

 In device_add(), @dev wan't put'd properly when it has zero length
bus_id (error path).  Fixed.


Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/base/core.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)


diff -Nru a/drivers/base/core.c b/drivers/base/core.c
--- a/drivers/base/core.c	2004-11-04 16:30:24 -08:00
+++ b/drivers/base/core.c	2004-11-04 16:30:24 -08:00
@@ -209,12 +209,12 @@
  */
 int device_add(struct device *dev)
 {
-	struct device * parent;
-	int error;
+	struct device *parent = NULL;
+	int error = -EINVAL;
 
 	dev = get_device(dev);
 	if (!dev || !strlen(dev->bus_id))
-		return -EINVAL;
+		goto Error;
 
 	parent = get_device(dev->parent);
 

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.6, 2004/11/04 10:54:31-08:00, tj@home-tj.org

[PATCH] driver-model: sysfs_release() dangling pointer reference fix

 df_03_sysfs_release_fix.patch

Some attributes are allocated dynamically (e.g. module and device
parameters) and are usually deallocated when the assoicated kobject is
released.  So, it's not safe to access attr after putting the kobject.


Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/file.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletion(-)


diff -Nru a/fs/sysfs/file.c b/fs/sysfs/file.c
--- a/fs/sysfs/file.c	2004-11-04 16:30:39 -08:00
+++ b/fs/sysfs/file.c	2004-11-04 16:30:39 -08:00
@@ -330,11 +330,13 @@
 {
 	struct kobject * kobj = to_kobj(filp->f_dentry->d_parent);
 	struct attribute * attr = to_attr(filp->f_dentry);
+	struct module * owner = attr->owner;
 	struct sysfs_buffer * buffer = filp->private_data;
 
 	if (kobj) 
 		kobject_put(kobj);
-	module_put(attr->owner);
+	/* After this point, attr should not be accessed. */
+	module_put(owner);
 
 	if (buffer) {
 		if (buffer->page)

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.9, 2004/11/04 11:59:39-08:00, greg@kroah.com

kevent: fix build error if CONFIG_KOBJECT_UEVENT is not selected.

Thanks to Serge Hallyn <serue@us.ibm.com> for pointing this out.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 lib/kobject_uevent.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)


diff -Nru a/lib/kobject_uevent.c b/lib/kobject_uevent.c
--- a/lib/kobject_uevent.c	2004-11-04 16:30:17 -08:00
+++ b/lib/kobject_uevent.c	2004-11-04 16:30:17 -08:00
@@ -168,7 +168,7 @@
 
 #else
 static inline int send_uevent(const char *signal, const char *obj,
-			      const void *buf, int buflen, int gfp_mask)
+			      char **envp, int gfp_mask)
 {
 	return 0;
 }

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.7, 2004/11/04 10:55:28-08:00, tj@home-tj.org

[PATCH] driver-model: kobject_add() error path reference counting fix

 df_04_kobject_add_ref_fix.patch

In kobject_add(), @kobj wasn't put'd properly on error path.  This
patch fixes it.


Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 lib/kobject.c |    1 +
 1 files changed, 1 insertion(+)


diff -Nru a/lib/kobject.c b/lib/kobject.c
--- a/lib/kobject.c	2004-11-04 16:30:32 -08:00
+++ b/lib/kobject.c	2004-11-04 16:30:32 -08:00
@@ -183,6 +183,7 @@
 		unlink(kobj);
 		if (parent)
 			kobject_put(parent);
+		kobject_put(kobj);
 	} else {
 		kobject_hotplug(kobj, KOBJ_ADD);
 	}

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.5, 2004/11/04 10:48:20-08:00, tj@home-tj.org

[PATCH] driver-model: bus_recan_devices() locking fix

 df_02_bus_rescan_devcies_fix.patch

 bus_rescan_devices() eventually calls device_attach() and thus
requires write locking the corresponding bus.  The original code just
called bus_for_each_dev() which only read locks the bus.  This patch
separates __bus_for_each_dev() and __bus_for_each_drv(), which don't
do locking themselves, out from the original functions and call them
with read lock in the original functions and with write lock in
bus_rescan_devices().


Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/base/bus.c |   93 +++++++++++++++++++++++++++++++----------------------
 1 files changed, 56 insertions(+), 37 deletions(-)


diff -Nru a/drivers/base/bus.c b/drivers/base/bus.c
--- a/drivers/base/bus.c	2004-11-04 16:30:46 -08:00
+++ b/drivers/base/bus.c	2004-11-04 16:30:46 -08:00
@@ -135,6 +135,52 @@
 
 decl_subsys(bus, &ktype_bus, NULL);
 
+static int __bus_for_each_dev(struct bus_type *bus, struct device *start,
+			      void *data, int (*fn)(struct device *, void *))
+{
+	struct list_head *head;
+	struct device *dev;
+	int error = 0;
+
+	if (!(bus = get_bus(bus)))
+		return -EINVAL;
+
+	head = &bus->devices.list;
+	dev = list_prepare_entry(start, head, bus_list);
+	list_for_each_entry_continue(dev, head, bus_list) {
+		get_device(dev);
+		error = fn(dev, data);
+		put_device(dev);
+		if (error)
+			break;
+	}
+	put_bus(bus);
+	return error;
+}
+
+static int __bus_for_each_drv(struct bus_type *bus, struct device_driver *start,
+			      void * data, int (*fn)(struct device_driver *, void *))
+{
+	struct list_head *head;
+	struct device_driver *drv;
+	int error = 0;
+
+	if (!(bus = get_bus(bus)))
+		return -EINVAL;
+
+	head = &bus->drivers.list;
+	drv = list_prepare_entry(start, head, kobj.entry);
+	list_for_each_entry_continue(drv, head, kobj.entry) {
+		get_driver(drv);
+		error = fn(drv, data);
+		put_driver(drv);
+		if (error)
+			break;
+	}
+	put_bus(bus);
+	return error;
+}
+
 /**
  *	bus_for_each_dev - device iterator.
  *	@bus:	bus type.
@@ -154,30 +200,16 @@
  *	to retain this data, it should do, and increment the reference
  *	count in the supplied callback.
  */
+
 int bus_for_each_dev(struct bus_type * bus, struct device * start,
 		     void * data, int (*fn)(struct device *, void *))
 {
-	struct device *dev;
-	struct list_head * head;
-	int error = 0;
-
-	if (!(bus = get_bus(bus)))
-		return -EINVAL;
-
-	head = &bus->devices.list;
-	dev = list_prepare_entry(start, head, bus_list);
+	int ret;
 
 	down_read(&bus->subsys.rwsem);
-	list_for_each_entry_continue(dev, head, bus_list) {
-		get_device(dev);
-		error = fn(dev, data);
-		put_device(dev);
-		if (error)
-			break;
-	}
+	ret = __bus_for_each_dev(bus, start, data, fn);
 	up_read(&bus->subsys.rwsem);
-	put_bus(bus);
-	return error;
+	return ret;
 }
 
 /**
@@ -203,27 +235,12 @@
 int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
 		     void * data, int (*fn)(struct device_driver *, void *))
 {
-	struct list_head * head;
-	struct device_driver *drv;
-	int error = 0;
-
-	if(!(bus = get_bus(bus)))
-		return -EINVAL;
-
-	head = &bus->drivers.list;
-	drv = list_prepare_entry(start, head, kobj.entry);
+	int ret;
 
 	down_read(&bus->subsys.rwsem);
-	list_for_each_entry_continue(drv, head, kobj.entry) {
-		get_driver(drv);
-		error = fn(drv, data);
-		put_driver(drv);
-		if(error)
-			break;
-	}
+	ret = __bus_for_each_drv(bus, start, data, fn);
 	up_read(&bus->subsys.rwsem);
-	put_bus(bus);
-	return error;
+	return ret;
 }
 
 /**
@@ -590,7 +607,9 @@
 {
 	int count = 0;
 
-	bus_for_each_dev(bus, NULL, &count, bus_rescan_devices_helper);
+	down_write(&bus->subsys.rwsem);
+	__bus_for_each_dev(bus, NULL, &count, bus_rescan_devices_helper);
+	up_write(&bus->subsys.rwsem);
 
 	return count;
 }

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.10, 2004/11/04 12:00:12-08:00, rml@novell.com

[PATCH] kobject_uevent: fix init ordering

Looks like kobject_uevent_init is executed before netlink_proto_init and
consequently always fails.  Not cool.

Attached patch switches the initialization over from core_initcall (init
level 1) to postcore_initcall (init level 2).  Netlink's initialization
is done in core_initcall, so this should fix the problem.  We should be
fine waiting until postcore_initcall.

Also a couple white space changes mixed in, because I am anal.

Signed-Off-By: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 lib/kobject_uevent.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)


diff -Nru a/lib/kobject_uevent.c b/lib/kobject_uevent.c
--- a/lib/kobject_uevent.c	2004-11-04 16:30:09 -08:00
+++ b/lib/kobject_uevent.c	2004-11-04 16:30:09 -08:00
@@ -120,9 +120,8 @@
 		sprintf(attrpath, "%s/%s", path, attr->name);
 		rc = send_uevent(signal, attrpath, NULL, gfp_mask);
 		kfree(attrpath);
-	} else {
+	} else
 		rc = send_uevent(signal, path, NULL, gfp_mask);
-	}
 
 exit:
 	kfree(path);
@@ -148,7 +147,6 @@
 {
 	return do_kobject_uevent(kobj, action, attr, GFP_ATOMIC);
 }
-
 EXPORT_SYMBOL_GPL(kobject_uevent_atomic);
 
 static int __init kobject_uevent_init(void)
@@ -164,7 +162,7 @@
 	return 0;
 }
 
-core_initcall(kobject_uevent_init);
+postcore_initcall(kobject_uevent_init);
 
 #else
 static inline int send_uevent(const char *signal, const char *obj,

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.4, 2004/11/04 10:28:20-08:00, tj@home-tj.org

[PATCH] driver-model: comment fix in bus.c

 df_01_driver_attach_comment_fix.patch

bus_match() was renamed to driver_probe_device() but the comment for
device_attach() wasn't updated.  This patch updates it.


Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/base/bus.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)


diff -Nru a/drivers/base/bus.c b/drivers/base/bus.c
--- a/drivers/base/bus.c	2004-11-04 16:30:54 -08:00
+++ b/drivers/base/bus.c	2004-11-04 16:30:54 -08:00
@@ -325,10 +325,10 @@
  *	driver_attach - try to bind driver to devices.
  *	@drv:	driver.
  *
- *	Walk the list of devices that the bus has on it and try to match
- *	the driver with each one.
- *	If bus_match() returns 0 and the @dev->driver is set, we've found
- *	a compatible pair.
+ *	Walk the list of devices that the bus has on it and try to
+ *	match the driver with each one.  If driver_probe_device()
+ *	returns 0 and the @dev->driver is set, we've found a
+ *	compatible pair.
  *
  *	Note that we ignore the -ENODEV error from driver_probe_device(),
  *	since it's perfectly valid for a driver not to bind to any devices.

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2449.2.11, 2004/11/04 12:00:36-08:00, rml@novell.com

[PATCH] kobject_uevent: add MAINTAINER entry

Attached patch adds a MAINTAINER entry for the kernel event layer.


Signed-Off-By: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 MAINTAINERS |    6 ++++++
 1 files changed, 6 insertions(+)


diff -Nru a/MAINTAINERS b/MAINTAINERS
--- a/MAINTAINERS	2004-11-04 16:30:02 -08:00
+++ b/MAINTAINERS	2004-11-04 16:30:02 -08:00
@@ -1247,6 +1247,12 @@
 W:	http://www.cse.unsw.edu.au/~neilb/patches/linux-devel/
 S:	Maintained
 
+KERNEL EVENT LAYER (KOBJECT_UEVENT)
+P:	Robert Love
+M:	rml@novell.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 LANMEDIA WAN CARD DRIVER
 P:	Andrew Stanley-Jones
 M:	asj@lanmedia.com

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2462, 2004/11/04 14:44:35-08:00, maneesh@in.ibm.com

[PATCH] fix kernel BUG at fs/sysfs/dir.c:20!

On Thu, Nov 04, 2004 at 12:52:38PM -0800, Greg KH wrote:
> Hi,
>
> I get the following BUG in the sysfs code when I do:
> 	- plug in a usb-serial device.
> 	- open the port with 'cat /dev/ttyUSB0'
> 	- unplug the device.
> 	- stop the 'cat' process with control-C
>
> This used to work just fine before your big sysfs changes.

There is a similar problem reported by s390 people where we see parent
kobject (directory) going away before child kobject (sub-directory). It
seems kobject code is able to handle this, but not the sysfs. What could
be happening that in sysfs_remove_dir() of parent directory, we try to
remove its contents. It works well with the regular files as it is the
final removal for sysfs_dirent corresponding to the files. But in case
of sub-directory we are doing an extra sysfs_put().  Once while removing
parent and the other one being the one from when sysfs_remove_dir() is
called for the child.

The following patch worked for the s390 people, I hope same will work in
this case also.


o Do not remove sysfs_dirents corresponding to the sub-directory in
  sysfs_remove_dir(). They will be removed in the sysfs_remove_dir() call
  for the specific sub-directory.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/dir.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)


diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
--- a/fs/sysfs/dir.c	2004-11-04 16:29:54 -08:00
+++ b/fs/sysfs/dir.c	2004-11-04 16:29:54 -08:00
@@ -277,7 +277,7 @@
 	pr_debug("sysfs %s: removing dir\n",dentry->d_name.name);
 	down(&dentry->d_inode->i_sem);
 	list_for_each_entry_safe(sd, tmp, &parent_sd->s_children, s_sibling) {
-		if (!sd->s_element)
+		if (!sd->s_element || !(sd->s_type & SYSFS_NOT_PINNED))
 			continue;
 		list_del_init(&sd->s_sibling);
 		sysfs_drop_dentry(sd, dentry);

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2094, 2004/11/12 11:42:03-08:00, miltonm@bga.com

[PATCH] fix sysfs backing store error path confusion

On Nov 3, 2004, at 3:42 PM, Greg KH wrote:

|On Tue, Nov 02, 2004 at 10:03:34AM -0600, Maneesh Soni wrote:
||On Tue, Nov 02, 2004 at 02:46:58AM -0600, Milton Miller wrote:
|||sysfs_new_dirent returns ERR_PTR(-ENOMEM) if kmalloc fails but the callers
|||were expecting NULL.
||
||Thanks for spotting this. But as you said, I will prefer to change the callee.
||How about this patch?
..
||-		return -ENOMEM;
||+		return NULL;
|
|Actually, this needs to be a 0, not NULL, otherwise the compiler
|complains with a warning.  I've fixed it up and applied it.
|
|thanks,
|
|greg k-h

I wondered why greg thought the type was wrong.   After it was merged I
realized that the wrong function was changed.  Here's an attempt to fix
both errors.


Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/dir.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)


diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
--- a/fs/sysfs/dir.c	2004-11-12 14:53:33 -08:00
+++ b/fs/sysfs/dir.c	2004-11-12 14:53:33 -08:00
@@ -38,7 +38,7 @@
 
 	sd = kmalloc(sizeof(*sd), GFP_KERNEL);
 	if (!sd)
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 
 	memset(sd, 0, sizeof(*sd));
 	atomic_set(&sd->s_count, 1);
@@ -56,7 +56,7 @@
 
 	sd = sysfs_new_dirent(parent_sd, element);
 	if (!sd)
-		return 0;
+		return -ENOMEMurn -ENOMEM;
 
 	sd->s_mode = mode;
 	sd->s_type = type;

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2095, 2004/11/12 11:42:28-08:00, anil.s.keshavamurthy@intel.com

[PATCH] Add KOBJ_ONLINE

I am trying to fix the current ACPI container.ko and processor.ko to use
kobject_hotplug() for notification. For this I would be requiring the
KOBJ_ONLINE definitions to be added to kobject_action.

Signed-off-by: Anil Keshavamurty <anil.s.keshavamurthy@intel.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 include/linux/kobject_uevent.h |    1 +
 lib/kobject_uevent.c           |    2 ++
 2 files changed, 3 insertions(+)


diff -Nru a/include/linux/kobject_uevent.h b/include/linux/kobject_uevent.h
--- a/include/linux/kobject_uevent.h	2004-11-12 14:53:26 -08:00
+++ b/include/linux/kobject_uevent.h	2004-11-12 14:53:26 -08:00
@@ -28,6 +28,7 @@
 	KOBJ_MOUNT	= (__force kobject_action_t) 0x04,	/* mount event for block devices */
 	KOBJ_UMOUNT	= (__force kobject_action_t) 0x05,	/* umount event for block devices */
 	KOBJ_OFFLINE	= (__force kobject_action_t) 0x06,	/* offline event for hotplug devices */
+	KOBJ_ONLINE	= (__force kobject_action_t) 0x07,	/* online event for hotplug devices */
 };
 
 
diff -Nru a/lib/kobject_uevent.c b/lib/kobject_uevent.c
--- a/lib/kobject_uevent.c	2004-11-12 14:53:26 -08:00
+++ b/lib/kobject_uevent.c	2004-11-12 14:53:26 -08:00
@@ -42,6 +42,8 @@
 		return "umount";
 	case KOBJ_OFFLINE:
 		return "offline";
+	case KOBJ_ONLINE:
+		return "online";
 	default:
 		return NULL;
 	}

[PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2093, 2004/11/12 11:41:25-08:00, david-b@pacbell.net

[PATCH] driver core: shrink struct device a bit

This patch removes two fields from "struct device" that are duplicated
in "struct dev_pm_info":  power_state (which should probably vanish)
and "saved_state".  There were only two "real" uses of saved_state;
both are now switched over to use dev_pm_info.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 arch/arm/common/locomo.c        |    3 ---
 arch/arm/common/sa1111.c        |   23 +++++++++++++++--------
 arch/arm/mach-sa1100/neponset.c |   23 +++++++++++++++--------
 include/linux/device.h          |    5 -----
 4 files changed, 30 insertions(+), 24 deletions(-)


diff -Nru a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
--- a/arch/arm/common/locomo.c	2004-11-12 14:53:41 -08:00
+++ b/arch/arm/common/locomo.c	2004-11-12 14:53:41 -08:00
@@ -627,9 +627,6 @@
 	if (lchip) {
 		__locomo_remove(lchip);
 		dev_set_drvdata(dev, NULL);
-
-		kfree(dev->saved_state);
-		dev->saved_state = NULL;
 	}
 
 	return 0;
diff -Nru a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
--- a/arch/arm/common/sa1111.c	2004-11-12 14:53:41 -08:00
+++ b/arch/arm/common/sa1111.c	2004-11-12 14:53:41 -08:00
@@ -797,6 +797,8 @@
 	unsigned int	wakeen1;
 };
 
+#ifdef	CONFIG_PM
+
 static int sa1111_suspend(struct device *dev, u32 state, u32 level)
 {
 	struct sa1111 *sachip = dev_get_drvdata(dev);
@@ -808,11 +810,10 @@
 	if (level != SUSPEND_DISABLE)
 		return 0;
 
-	dev->saved_state = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
-	if (!dev->saved_state)
+	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
+	if (!save)
 		return -ENOMEM;
-
-	save = (struct sa1111_save_data *)dev->saved_state;
+	dev->power.saved_state = save;
 
 	spin_lock_irqsave(&sachip->lock, flags);
 
@@ -870,7 +871,7 @@
 	if (level != RESUME_ENABLE)
 		return 0;
 
-	save = (struct sa1111_save_data *)dev->saved_state;
+	save = (struct sa1111_save_data *)dev->power.saved_state;
 	if (!save)
 		return 0;
 
@@ -915,12 +916,18 @@
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
-	dev->saved_state = NULL;
+	dev->power.saved_state = NULL;
 	kfree(save);
 
 	return 0;
 }
 
+#else	/* !CONFIG_PM */
+#define sa1111_resume	NULL
+#define sa1111_suspend	NULL
+#endif	/* !CONFIG_PM */
+
+
 static int sa1111_probe(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -943,8 +950,8 @@
 		__sa1111_remove(sachip);
 		dev_set_drvdata(dev, NULL);
 
-		kfree(dev->saved_state);
-		dev->saved_state = NULL;
+		kfree(dev->power.saved_state);
+		dev->power.saved_state = NULL;
 	}
 
 	return 0;
diff -Nru a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
--- a/arch/arm/mach-sa1100/neponset.c	2004-11-12 14:53:41 -08:00
+++ b/arch/arm/mach-sa1100/neponset.c	2004-11-12 14:53:41 -08:00
@@ -173,6 +173,8 @@
 	return 0;
 }
 
+#ifdef CONFIG_PM
+
 /*
  * LDM power management.
  */
@@ -184,12 +186,12 @@
 	if (level == SUSPEND_SAVE_STATE ||
 	    level == SUSPEND_DISABLE ||
 	    level == SUSPEND_POWER_DOWN) {
-		if (!dev->saved_state)
-			dev->saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
-		if (!dev->saved_state)
+		if (!dev->power.saved_state)
+			dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+		if (!dev->power.saved_state)
 			return -ENOMEM;
 
-		*(unsigned int *)dev->saved_state = NCR_0;
+		*(unsigned int *)dev->power.saved_state = NCR_0;
 	}
 
 	return 0;
@@ -198,15 +200,20 @@
 static int neponset_resume(struct device *dev, u32 level)
 {
 	if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
-		if (dev->saved_state) {
-			NCR_0 = *(unsigned int *)dev->saved_state;
-			kfree(dev->saved_state);
-			dev->saved_state = NULL;
+		if (dev->power.saved_state) {
+			NCR_0 = *(unsigned int *)dev->power.saved_state;
+			kfree(dev->power.saved_state);
+			dev->power.saved_state = NULL;
 		}
 	}
 
 	return 0;
 }
+
+#else
+#define	neponset_suspend	NULL
+#define	neponset_resume	NULL
+#endif
 
 static struct device_driver neponset_device_driver = {
 	.name		= "neponset",
diff -Nru a/include/linux/device.h b/include/linux/device.h
--- a/include/linux/device.h	2004-11-12 14:53:41 -08:00
+++ b/include/linux/device.h	2004-11-12 14:53:41 -08:00
@@ -268,12 +268,7 @@
 	void		*platform_data;	/* Platform specific data (e.g. ACPI,
 					   BIOS data relevant to device) */
 	struct dev_pm_info	power;
-	u32		power_state;	/* Current operating state. In
-					   ACPI-speak, this is D0-D3, D0
-					   being fully functional, and D3
-					   being off. */
 
-	unsigned char *saved_state;	/* saved device state */
 	u32		detach_state;	/* State to enter when device is
 					   detached from its driver. */
 

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2100, 2004/11/12 11:44:09-08:00, greg@kroah.com

[PATCH] driver core: fix up some missed power_state changes from David's patch

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/video/aty/aty128fb.c   |   10 +++++-----
 drivers/video/aty/atyfb_base.c |   10 +++++-----
 drivers/video/aty/radeon_pm.c  |    6 +++---
 3 files changed, 13 insertions(+), 13 deletions(-)


diff -Nru a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
--- a/drivers/video/aty/aty128fb.c	2004-11-12 14:52:49 -08:00
+++ b/drivers/video/aty/aty128fb.c	2004-11-12 14:52:49 -08:00
@@ -2363,7 +2363,7 @@
 		state = 2;
 #endif /* CONFIG_PPC_PMAC */
 	 
-	if (state != 2 || state == pdev->dev.power_state)
+	if (state != 2 || state == pdev->dev.power.power_state)
 		return 0;
 
 	printk(KERN_DEBUG "aty128fb: suspending...\n");
@@ -2394,7 +2394,7 @@
 
 	release_console_sem();
 
-	pdev->dev.power_state = state;
+	pdev->dev.power.power_state = state;
 
 	return 0;
 }
@@ -2404,13 +2404,13 @@
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct aty128fb_par *par = info->par;
 
-	if (pdev->dev.power_state == 0)
+	if (pdev->dev.power.power_state == 0)
 		return 0;
 
 	acquire_console_sem();
 
 	/* Wakeup chip */
-	if (pdev->dev.power_state == 2)
+	if (pdev->dev.power.power_state == 2)
 		aty128_set_suspend(par, 0);
 	par->asleep = 0;
 
@@ -2430,7 +2430,7 @@
 
 	release_console_sem();
 
-	pdev->dev.power_state = 0;
+	pdev->dev.power.power_state = 0;
 
 	printk(KERN_DEBUG "aty128fb: resumed !\n");
 
diff -Nru a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
--- a/drivers/video/aty/atyfb_base.c	2004-11-12 14:52:49 -08:00
+++ b/drivers/video/aty/atyfb_base.c	2004-11-12 14:52:49 -08:00
@@ -2033,7 +2033,7 @@
 		state = 2;
 #endif /* CONFIG_PPC_PMAC */
 
-	if (state != 2 || state == pdev->dev.power_state)
+	if (state != 2 || state == pdev->dev.power.power_state)
 		return 0;
 
 	acquire_console_sem();
@@ -2062,7 +2062,7 @@
 
 	release_console_sem();
 
-	pdev->dev.power_state = state;
+	pdev->dev.power.power_state = state;
 
 	return 0;
 }
@@ -2072,12 +2072,12 @@
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 
-	if (pdev->dev.power_state == 0)
+	if (pdev->dev.power.power_state == 0)
 		return 0;
 
 	acquire_console_sem();
 
-	if (pdev->dev.power_state == 2)
+	if (pdev->dev.power.power_state == 2)
 		aty_power_mgmt(0, par);
 	par->asleep = 0;
 
@@ -2093,7 +2093,7 @@
 
 	release_console_sem();
 
-	pdev->dev.power_state = 0;
+	pdev->dev.power.power_state = 0;
 
 	return 0;
 }
diff -Nru a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
--- a/drivers/video/aty/radeon_pm.c	2004-11-12 14:52:49 -08:00
+++ b/drivers/video/aty/radeon_pm.c	2004-11-12 14:52:49 -08:00
@@ -898,7 +898,7 @@
 
 	release_console_sem();
 
-	pdev->dev.power_state = state;
+	pdev->dev.power.power_state = state;
 
 	return 0;
 }
@@ -908,7 +908,7 @@
         struct fb_info *info = pci_get_drvdata(pdev);
         struct radeonfb_info *rinfo = info->par;
 
-	if (pdev->dev.power_state == 0)
+	if (pdev->dev.power.power_state == 0)
 		return 0;
 
 	acquire_console_sem();
@@ -935,7 +935,7 @@
 
 	release_console_sem();
 
-	pdev->dev.power_state = 0;
+	pdev->dev.power.power_state = 0;
 
 	printk(KERN_DEBUG "radeonfb: resumed !\n");
 

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2099, 2004/11/12 11:43:49-08:00, kay.sievers@vrfy.org

[PATCH] print hotplug SEQNUM as unsigned

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 lib/kobject_uevent.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)


diff -Nru a/lib/kobject_uevent.c b/lib/kobject_uevent.c
--- a/lib/kobject_uevent.c	2004-11-12 14:52:56 -08:00
+++ b/lib/kobject_uevent.c	2004-11-12 14:52:56 -08:00
@@ -289,10 +289,10 @@
 	spin_lock(&sequence_lock);
 	seq = ++hotplug_seqnum;
 	spin_unlock(&sequence_lock);
-	sprintf(seq_buff, "SEQNUM=%lld", (long long)seq);
+	sprintf(seq_buff, "SEQNUM=%llu", (unsigned long long)seq);
 
-	pr_debug ("%s: %s %s seq=%lld %s %s %s %s %s\n",
-		  __FUNCTION__, argv[0], argv[1], (long long)seq,
+	pr_debug ("%s: %s %s seq=%llu %s %s %s %s %s\n",
+		  __FUNCTION__, argv[0], argv[1], (unsigned long long)seq,
 		  envp[0], envp[1], envp[2], envp[3], envp[4]);
 
 	send_uevent(action_string, kobj_path, envp, GFP_KERNEL);

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2098, 2004/11/12 11:43:27-08:00, kay.sievers@vrfy.org

[PATCH] add the bus name to the hotplug environment

Add the name of the bus and the driver to the hotplug event for
/sys/devices/*. With this addition, userspace knows what it can
expect from sysfs to show up, instead of waiting for a timeout
for devices without a bus.

  ACTION=add
  DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1
  SUBSYSTEM=usb
  SEQNUM=978
  PHYSDEVBUS=usb
  PHYSDEVDRIVER=usb

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/base/bus.c  |    2 +-
 drivers/base/core.c |   21 +++++++++++++++++++++
 2 files changed, 22 insertions(+), 1 deletion(-)


diff -Nru a/drivers/base/bus.c b/drivers/base/bus.c
--- a/drivers/base/bus.c	2004-11-12 14:53:04 -08:00
+++ b/drivers/base/bus.c	2004-11-12 14:53:04 -08:00
@@ -247,7 +247,7 @@
  *	device_bind_driver - bind a driver to one device.
  *	@dev:	device.
  *
- *	Allow manual attachment of a driver to a deivce.
+ *	Allow manual attachment of a driver to a device.
  *	Caller must have already set @dev->driver.
  *
  *	Note that this does not modify the bus reference count
diff -Nru a/drivers/base/core.c b/drivers/base/core.c
--- a/drivers/base/core.c	2004-11-12 14:53:04 -08:00
+++ b/drivers/base/core.c	2004-11-12 14:53:04 -08:00
@@ -116,7 +116,28 @@
 			int num_envp, char *buffer, int buffer_size)
 {
 	struct device *dev = to_dev(kobj);
+	int i = 0;
+	int length = 0;
 	int retval = 0;
+
+	/* add bus name of physical device */
+	if (dev->bus)
+		add_hotplug_env_var(envp, num_envp, &i,
+				    buffer, buffer_size, &length,
+				    "PHYSDEVBUS=%s", dev->bus->name);
+
+	/* add driver name of physical device */
+	if (dev->driver)
+		add_hotplug_env_var(envp, num_envp, &i,
+				    buffer, buffer_size, &length,
+				    "PHYSDEVDRIVER=%s", dev->driver->name);
+
+	/* terminate, set to next free slot, shrink available space */
+	envp[i] = NULL;
+	envp = &envp[i];
+	num_envp -= i;
+	buffer = &buffer[length];
+	buffer_size -= length;
 
 	if (dev->bus->hotplug) {
 		/* have the bus specific function add its stuff */

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2096, 2004/11/12 11:42:46-08:00, maneesh@in.ibm.com

[PATCH] sysfs: fix duplicate driver registration error

o Do not release existing directory if the new directory happens to be a
  duplicate directory. Thanks to Kay Sievers for the testcase.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/dir.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)


diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
--- a/fs/sysfs/dir.c	2004-11-12 14:53:18 -08:00
+++ b/fs/sysfs/dir.c	2004-11-12 14:53:18 -08:00
@@ -111,7 +111,7 @@
 				d_rehash(*d);
 			}
 		}
-		if (error)
+		if (error && (error != -EEXIST))
 			d_drop(*d);
 		dput(*d);
 	} else

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2101, 2004/11/12 12:46:17-08:00, greg@kroah.com

sysfs: fix odd patch error

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 fs/sysfs/dir.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)


diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
--- a/fs/sysfs/dir.c	2004-11-12 14:52:41 -08:00
+++ b/fs/sysfs/dir.c	2004-11-12 14:52:41 -08:00
@@ -56,7 +56,7 @@
 
 	sd = sysfs_new_dirent(parent_sd, element);
 	if (!sd)
-		return -ENOMEMurn -ENOMEM;
+		return -ENOMEM;
 
 	sd->s_mode = mode;
 	sd->s_type = type;

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

ChangeSet 1.2097, 2004/11/12 11:43:08-08:00, kay.sievers@vrfy.org

[PATCH] add the driver name to the hotplug environment

Add the name of the device's driver to the hotplug environment of class
and block devices.

  ACTION=add
  DEVPATH=/block/sda
  SUBSYSTEM=block
  SEQNUM=986
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host0/target0:0:0/0:0:0:0
  PHYSDEVBUS=scsi
  PHYSDEVDRIVER=sd

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


 drivers/base/class.c  |    6 ++++++
 drivers/block/genhd.c |    6 ++++++
 2 files changed, 12 insertions(+)


diff -Nru a/drivers/base/class.c b/drivers/base/class.c
--- a/drivers/base/class.c	2004-11-12 14:53:11 -08:00
+++ b/drivers/base/class.c	2004-11-12 14:53:11 -08:00
@@ -303,6 +303,12 @@
 					    buffer, buffer_size, &length,
 					    "PHYSDEVBUS=%s", dev->bus->name);
 
+		/* add driver name of physical device */
+		if (dev->driver)
+			add_hotplug_env_var(envp, num_envp, &i,
+					    buffer, buffer_size, &length,
+					    "PHYSDEVDRIVER=%s", dev->driver->name);
+
 		/* terminate, set to next free slot, shrink available space */
 		envp[i] = NULL;
 		envp = &envp[i];
diff -Nru a/drivers/block/genhd.c b/drivers/block/genhd.c
--- a/drivers/block/genhd.c	2004-11-12 14:53:11 -08:00
+++ b/drivers/block/genhd.c	2004-11-12 14:53:11 -08:00
@@ -469,6 +469,12 @@
 					    buffer, buffer_size, &length,
 					    "PHYSDEVBUS=%s", dev->bus->name);
 
+		/* add driver name of physical device */
+		if (dev->driver)
+			add_hotplug_env_var(envp, num_envp, &i,
+					    buffer, buffer_size, &length,
+					    "PHYSDEVDRIVER=%s", dev->driver->name);
+
 		envp[i] = NULL;
 	}
 

Re: [PATCH] More Driver Core patches for 2.6.10-rc1

[Greg KH]

Replied to both of you, and the list, to prevent others from pointing
out the same thing multiple times :)

Oh, it's nice to see that people actually read these patches, I like it.


On Sat, Nov 13, 2004 at 12:20:17AM +0100, Kenneth Aafl?y wrote:
> On Saturday 13 November 2004 00:00, Greg KH wrote:
> > ChangeSet 1.2094, 2004/11/12 11:42:03-08:00, miltonm@bga.com
> >
> > [PATCH] fix sysfs backing store error path confusion
> [snip]
> >   sd = sysfs_new_dirent(parent_sd, element);
> >   if (!sd)
> > -  return 0;
> > +  return -ENOMEMurn -ENOMEM;
> 
> Confusingly strange :)
> 
> Kenneth

On Sat, Nov 13, 2004 at 01:00:52AM +0100, Francois Romieu wrote:
> Greg KH <greg@kroah.com> :
> [...]
> > diff -Nru a/fs/sysfs/dir.c b/fs/sysfs/dir.c
> > --- a/fs/sysfs/dir.c	2004-11-12 14:53:33 -08:00
> > +++ b/fs/sysfs/dir.c	2004-11-12 14:53:33 -08:00
> [...]
> > @@ -56,7 +56,7 @@
> >  
> >  	sd = sysfs_new_dirent(parent_sd, element);
> >  	if (!sd)
> > -		return 0;
> > +		return -ENOMEMurn -ENOMEM;
> 
> Oops.

Yeah, I don't know what happened with my tools here.  But if you look at
the next patch in the series, I fixed it.

thanks,

greg k-h