From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: Re: [PATCH] I2C update for 2.6.10-rc1
Date: Mon, 8 Nov 2004 21:24:17 -0800 [thread overview]
Message-ID: <10999778574055@kroah.com> (raw)
In-Reply-To: <10999778572385@kroah.com>
ChangeSet 1.2014.1.22, 2004/11/08 16:45:39-08:00, bunk@stusta.de
[PATCH] i2c/busses/ : make some code static
The patch below makes some needlessly global code under i2c/busses/
static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
drivers/i2c/busses/i2c-ali1535.c | 4 ++--
drivers/i2c/busses/i2c-amd8111.c | 12 ++++++------
drivers/i2c/busses/scx200_acb.c | 4 ++--
drivers/i2c/busses/scx200_i2c.c | 4 ++--
4 files changed, 12 insertions(+), 12 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
--- a/drivers/i2c/busses/i2c-ali1535.c 2004-11-08 18:54:33 -08:00
+++ b/drivers/i2c/busses/i2c-ali1535.c 2004-11-08 18:54:33 -08:00
@@ -137,7 +137,7 @@
static unsigned short ali1535_smba;
-DECLARE_MUTEX(i2c_ali1535_sem);
+static DECLARE_MUTEX(i2c_ali1535_sem);
/* Detect whether a ALI1535 can be found, and initialize it, where necessary.
Note the differences between kernels with the old PCI BIOS interface and
@@ -465,7 +465,7 @@
}
-u32 ali1535_func(struct i2c_adapter *adapter)
+static u32 ali1535_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
diff -Nru a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
--- a/drivers/i2c/busses/i2c-amd8111.c 2004-11-08 18:54:33 -08:00
+++ b/drivers/i2c/busses/i2c-amd8111.c 2004-11-08 18:54:33 -08:00
@@ -67,7 +67,7 @@
* ACPI 2.0 chapter 13 access of registers of the EC
*/
-unsigned int amd_ec_wait_write(struct amd_smbus *smbus)
+static unsigned int amd_ec_wait_write(struct amd_smbus *smbus)
{
int timeout = 500;
@@ -82,7 +82,7 @@
return 0;
}
-unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
+static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
{
int timeout = 500;
@@ -97,7 +97,7 @@
return 0;
}
-unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data)
+static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data)
{
if (amd_ec_wait_write(smbus))
return -1;
@@ -114,7 +114,7 @@
return 0;
}
-unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data)
+static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data)
{
if (amd_ec_wait_write(smbus))
return -1;
@@ -174,7 +174,7 @@
#define AMD_SMB_PRTCL_PEC 0x80
-s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
+static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data * data)
{
struct amd_smbus *smbus = adap->algo_data;
@@ -315,7 +315,7 @@
}
-u32 amd8111_func(struct i2c_adapter *adapter)
+static u32 amd8111_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA |
diff -Nru a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
--- a/drivers/i2c/busses/scx200_acb.c 2004-11-08 18:54:33 -08:00
+++ b/drivers/i2c/busses/scx200_acb.c 2004-11-08 18:54:33 -08:00
@@ -402,9 +402,9 @@
.functionality = scx200_acb_func,
};
-struct scx200_acb_iface *scx200_acb_list;
+static struct scx200_acb_iface *scx200_acb_list;
-int scx200_acb_probe(struct scx200_acb_iface *iface)
+static int scx200_acb_probe(struct scx200_acb_iface *iface)
{
u8 val;
diff -Nru a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
--- a/drivers/i2c/busses/scx200_i2c.c 2004-11-08 18:54:33 -08:00
+++ b/drivers/i2c/busses/scx200_i2c.c 2004-11-08 18:54:33 -08:00
@@ -86,7 +86,7 @@
.name = "NatSemi SCx200 I2C",
};
-int scx200_i2c_init(void)
+static int scx200_i2c_init(void)
{
pr_debug(NAME ": NatSemi SCx200 I2C Driver\n");
@@ -115,7 +115,7 @@
return 0;
}
-void scx200_i2c_cleanup(void)
+static void scx200_i2c_cleanup(void)
{
i2c_bit_del_bus(&scx200_i2c_ops);
}
next prev parent reply other threads:[~2004-11-09 5:33 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-09 5:22 [BK PATCH] I2C update for 2.6.10-rc1 Greg KH
2004-11-09 5:24 ` [PATCH] " Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH [this message]
2004-11-09 5:24 ` Greg KH
2004-11-09 5:24 ` Greg KH
2004-11-09 10:17 ` Jean Delvare
2004-11-09 11:12 ` Arjan van de Ven
2004-11-09 14:10 ` Jean Delvare
2004-11-09 9:29 ` [BK PATCH] " Jean Delvare
2004-11-09 15:21 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10999778574055@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox