From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI fixes for 2.6.10-rc1
Date: Fri, 12 Nov 2004 15:21:56 -0800 [thread overview]
Message-ID: <11003017162945@kroah.com> (raw)
In-Reply-To: <11003017161569@kroah.com>
ChangeSet 1.2026.66.13, 2004/11/05 15:05:24-08:00, matthew@wil.cx
[PATCH] PCI: add pci_fixup_early
Port Ivan's early PCI fixups patch to 2.6.10-rc1. Also fix some indentation
to make it less than 80 columns.
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
drivers/pci/probe.c | 3 +++
include/asm-generic/vmlinux.lds.h | 3 +++
include/linux/pci.h | 34 ++++++++++++++++++----------------
3 files changed, 24 insertions(+), 16 deletions(-)
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c 2004-11-12 15:13:20 -08:00
+++ b/drivers/pci/probe.c 2004-11-12 15:13:20 -08:00
@@ -478,6 +478,9 @@
/* "Unknown power state" */
dev->current_state = 4;
+ /* Early fixups, before probing the BARs */
+ pci_fixup_device(pci_fixup_early, dev);
+
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
if (class == PCI_CLASS_BRIDGE_PCI)
diff -Nru a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
--- a/include/asm-generic/vmlinux.lds.h 2004-11-12 15:13:20 -08:00
+++ b/include/asm-generic/vmlinux.lds.h 2004-11-12 15:13:20 -08:00
@@ -18,6 +18,9 @@
\
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
+ VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
+ *(.pci_fixup_early) \
+ VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
*(.pci_fixup_header) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
diff -Nru a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h 2004-11-12 15:13:20 -08:00
+++ b/include/linux/pci.h 2004-11-12 15:13:20 -08:00
@@ -989,31 +989,33 @@
*/
struct pci_fixup {
- u16 vendor, device; /* You can use PCI_ANY_ID here of course */
+ u16 vendor, device; /* You can use PCI_ANY_ID here of course */
void (*hook)(struct pci_dev *dev);
};
enum pci_fixup_pass {
- pci_fixup_header, /* Called immediately after reading configuration header */
+ pci_fixup_early, /* Before probing BARs */
+ pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
};
/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_header"))) = { \
- vendor, device, hook };
-
-#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_final"))) = { \
- vendor, device, hook };
-
-#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
- static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__ \
- __attribute__((__section__(".pci_fixup_enable"))) = { \
- vendor, device, hook };
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \
+ static struct pci_fixup __pci_fixup_##name __attribute_used__ \
+ __attribute__((__section__(#section))) = { vendor, device, hook };
+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
+ vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
+ vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
next prev parent reply other threads:[~2004-11-12 23:25 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-12 23:20 [BK PATCH] PCI fixes for 2.6.10-rc1 Greg KH
2004-11-12 23:21 ` [PATCH] " Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH [this message]
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:21 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-12 23:22 ` Greg KH
2004-11-13 9:12 ` Russell King
2004-11-13 10:03 ` Jan Dittmer
2004-11-13 10:22 ` Russell King
2004-11-13 10:45 ` Jan Dittmer
2004-11-13 10:48 ` Russell King
2004-11-13 10:58 ` Jan Dittmer
-- strict thread matches above, loose matches on Subject: below --
2004-11-13 7:33 James Tabor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11003017162945@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox