Re: ATARAID and KERNEL-2.6.9

[Sasa Ostrouska <sasa.ostrouska@volja.net>]

On Tue, 2004-12-21 at 14:30 -0500, Jeff Garzik wrote:
> Sasa Ostrouska wrote:
> > Dear Sirs,
> > 
> >         I have a little problem or maybe big one. I try to 
> > put to work the kernel-2.6.9 on my machine. I have a slackware
> > current install and the following hardware.
> 
> use dmraid for 2.6.x.
> 
> 	Jeff
> 
> 
> 
Dear Jeff, 

	Many thanks for your reply. I would like to ask you if 
you have some experience with this ? This means if you can point me to a
good how to or some documentation on the net, or maybe 
describe how to do the steps. This just because I tried to instal the
lilo but it gave me an error when I did /sbin/lilo and the root option
was set to /dev/ataraid/d0. I tried once to 
boot the machine with the options like noinitrd root=/dev/hde and it
booted up but then complained that the partitiona are mounted rw and to
give the root password for correcting the errors. After that I rebooted
to give the ro option and it never had booted again. 

Many many thanks for your help.

Best Regards
Sasa Ostrouska