linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: linux-kernel@vger.kernel.org,
	Detlev Casanova <detlev.casanova@collabora.com>
Cc: Detlev Casanova <detlev.casanova@collabora.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, kernel@collabora.com
Subject: Re: [PATCH v2 00/12] media: rkvdec: Add support for VDPU381 and VDPU383
Date: Mon, 11 Aug 2025 11:56:00 +0200	[thread overview]
Message-ID: <11040209.aFP6jjVeTY@diego> (raw)
In-Reply-To: <20250808200340.156393-1-detlev.casanova@collabora.com>

Hi Detlev,

Am Freitag, 8. August 2025, 22:03:22 Mitteleuropäische Sommerzeit schrieb Detlev Casanova:
> These variants are found respectively in the RK3588 and RK3576 SoCs.
> This patch only adds support for H264 and H265 in both variants.
> 
> As there is a considerable part of the code that can be shared with the
> already supported rkvdec decoder driver, the support for these variants
> is added here rather than writing a new driver.
> 
> This patch set uses the newly introduced hevc_ext_sps_[ls]t_rps v4l2
> controls for HEVC [1].
> Therefore, a patched version of userpace tools is needed for HEVC
> support (added for GStreamer[2] and in an early stage for FFmpeg[3]).
> 
> This patch set also depends on the preparation patch set sent earlier [4]
> as well as the iommu restore fix [5] (already merged in linux-media) and
> Nicolas Frattaroli's bitmap patch [6] to support setting registers that
> uses upper 16 bits as masks.
> 
> [1]: https://lore.kernel.org/all/20250807194327.69900-1-detlev.casanova@collabora.com/
> [2]: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/9355
> [3]: https://gitlab.collabora.com/detlev/ffmpeg
> [4]: https://lore.kernel.org/all/20250623160722.55938-1-detlev.casanova@collabora.com/
> [5]: https://lore.kernel.org/all/20250508-rkvdec-iommu-reset-v1-1-c46b6efa6e9b@collabora.com/
> [6]: https://lore.kernel.org/all/20250623-byeword-update-v2-1-cf1fc08a2e1f@collabora.com/
> 
> Changes since v1:
>  - Add parsing of the short and long term ref frame sets from the new v4l2
>    controls
>  - Add RPS cache to avoid parsing the same data again
>  - Fix HEVC pixel formats selection
>  - Fix multiple indentation errors

when applying the series, git was a bit unhappy about some whitespaces:


> Detlev Casanova (12):
>   media: rkvdec: Switch to using structs instead of writel
>   media: rkvdec: Move cabac table to its own source file

Applying: media: rkvdec: Move cabac table to its own source file
.git/rebase-apply/patch:535: new blank line at EOF.
+
Warnung: 1 Zeile fügt Whitespace-Fehler hinzu.


>   media: rkvdec: Use structs to represent the HW RPS
>   media: rkvdec: Move h264 functions to common file

Applying: media: rkvdec: Move h264 functions to common file
.git/rebase-apply/patch:278: new blank line at EOF.
+
Warnung: 1 Zeile fügt Whitespace-Fehler hinzu.


>   media: rkvdec: Add per variant configuration
>   media: rkvdec: Add RCB and SRAM support

Applying: media: rkvdec: Add RCB and SRAM support
.git/rebase-apply/patch:200: new blank line at EOF.
+
Warnung: 1 Zeile fügt Whitespace-Fehler hinzu.


>   media: rkvdec: Support per-variant interrupt handler
>   media: rkvdec: Enable all clocks without naming them
>   media: rkvdec: Add H264 support for the VDPU381 variant
>   media: rkvdec: Add H264 support for the VDPU383 variant
>   media: rkvdec: Add HEVC support for the VDPU381 variant

Applying: media: rkvdec: Add HEVC support for the VDPU381 variant
.git/rebase-apply/patch:3483: new blank line at EOF.
+
.git/rebase-apply/patch:4035: new blank line at EOF.
+
Warnung: 2 Zeilen fügen Whitespace-Fehler hinzu.


Heiko



  parent reply	other threads:[~2025-08-11  9:56 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-08 20:03 [PATCH v2 00/12] media: rkvdec: Add support for VDPU381 and VDPU383 Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 01/12] media: rkvdec: Switch to using structs instead of writel Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 02/12] media: rkvdec: Move cabac table to its own source file Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 03/12] media: rkvdec: Use structs to represent the HW RPS Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 04/12] media: rkvdec: Move h264 functions to common file Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 05/12] media: rkvdec: Add per variant configuration Detlev Casanova
2025-08-11  6:13   ` Krzysztof Kozlowski
2025-08-11 13:52     ` Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 06/12] media: rkvdec: Add RCB and SRAM support Detlev Casanova
2025-08-11  6:13   ` Krzysztof Kozlowski
2025-08-11 13:54     ` Detlev Casanova
2025-08-11 14:01       ` Krzysztof Kozlowski
2025-08-11 18:44         ` Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 07/12] media: rkvdec: Support per-variant interrupt handler Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 08/12] media: rkvdec: Enable all clocks without naming them Detlev Casanova
2025-08-08 20:03 ` [PATCH v2 09/12] media: rkvdec: Add H264 support for the VDPU381 variant Detlev Casanova
2025-08-12 17:07   ` Dmitry Osipenko
2025-08-08 20:03 ` [PATCH v2 10/12] media: rkvdec: Add H264 support for the VDPU383 variant Detlev Casanova
2025-08-09 11:53   ` kernel test robot
2025-08-11 18:28   ` Nicolas Dufresne
2025-08-08 20:03 ` [PATCH v2 11/12] media: rkvdec: Add HEVC support for the VDPU381 variant Detlev Casanova
2025-08-09 13:17   ` kernel test robot
2025-08-08 20:03 ` [PATCH v2 12/12] media: rkvdec: Add HEVC support for the VDPU383 variant Detlev Casanova
2025-08-11  9:56 ` Heiko Stübner [this message]
2025-08-11 16:33   ` [PATCH v2 00/12] media: rkvdec: Add support for VDPU381 and VDPU383 Detlev Casanova
2025-08-12  7:20 ` Piotr Oniszczuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11040209.aFP6jjVeTY@diego \
    --to=heiko@sntech.de \
    --cc=detlev.casanova@collabora.com \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).