From: Kenan Esau <kenan.esau@conan.de>
To: Vojtech Pavlik <vojtech@suse.cz>
Cc: harald.hoyer@redhat.de, dtor_core@ameritech.net,
linux-input@atrey.karlin.mff.cuni.cz,
linux-kernel@vger.kernel.org
Subject: Re: [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver
Date: Thu, 17 Feb 2005 15:19:53 +0100 [thread overview]
Message-ID: <1108649993.2994.18.camel@localhost> (raw)
In-Reply-To: <20050216213508.GD3001@ucw.cz>
Am Mittwoch, den 16.02.2005, 22:35 +0100 schrieb Vojtech Pavlik:
> On Wed, Feb 16, 2005 at 07:34:52PM +0100, Kenan Esau wrote:
>
> > > > +
> > > > + /*
> > > > + Enable absolute output -- ps2_command fails always but if
> > > > + you leave this call out the touchsreen will never send
> > > > + absolute coordinates
> > > > + */
> > > > + param = 0x07;
> > > > + ps2_command(ps2dev, ¶m, PSMOUSE_CMD_SETRES);
> > >
> > > Have you checked whether really the touchscreen sends a 0xfe error back,
> > > or some other value, or timeout? i8042.debug=1 is your friend here.
> >
> > Yes the answer is 0xfe.
>
> Would you be so kind to post the 'dmesg' log?
Shure -- here you are...
...
input: LBPS/2 Fujitsu Lifebook TouchScreen on isa0060/serio1
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78488524]
drivers/input/serio/i8042.c: f5 -> i8042 (parameter) [78488524]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78488532]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78488753]
drivers/input/serio/i8042.c: ff -> i8042 (parameter) [78488753]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78488759]
drivers/input/serio/i8042.c: aa <- i8042 (interrupt, aux, 12) [78488822]
drivers/input/serio/i8042.c: 00 <- i8042 (interrupt, aux, 12) [78488823]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489004]
drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [78489004]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78489009]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489009]
drivers/input/serio/i8042.c: 07 -> i8042 (parameter) [78489009]
drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux, 12) [78489014]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489014]
drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [78489014]
drivers/input/serio/i8042.c: fc <- i8042 (interrupt, aux, 12) [78489018]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489216]
drivers/input/serio/i8042.c: e8 -> i8042 (parameter) [78489216]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78489218]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489219]
drivers/input/serio/i8042.c: 03 -> i8042 (parameter) [78489219]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78489223]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489223]
drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [78489223]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78489228]
drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489229]
drivers/input/serio/i8042.c: f4 -> i8042 (parameter) [78489229]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, aux, 12) [78489233]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, kbd, 1) [78494505]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, kbd, 1) [78494603]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, kbd, 1) [78494680]
...
next prev parent reply other threads:[~2005-02-17 14:21 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-11 20:10 [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver Vojtech Pavlik
2005-02-12 17:01 ` Kenan Esau
2005-02-12 17:46 ` Arjan van de Ven
2005-02-13 9:39 ` Kenan Esau
2005-02-13 11:46 ` Vojtech Pavlik
2005-02-12 18:17 ` Dmitry Torokhov
2005-02-12 18:34 ` Vojtech Pavlik
2005-02-13 10:05 ` Kenan Esau
2005-02-13 12:01 ` Vojtech Pavlik
2005-02-13 18:14 ` Kenan Esau
2005-02-13 19:02 ` Vojtech Pavlik
[not found] ` <200502130149.11183.dtor_core@ameritech.net>
2005-02-13 8:36 ` Vojtech Pavlik
2005-02-14 10:06 ` Harald Hoyer
2005-02-15 8:57 ` Kenan Esau
2005-02-15 13:43 ` Vojtech Pavlik
2005-02-15 14:43 ` Dmitry Torokhov
2005-02-15 17:03 ` Kenan Esau
2005-02-15 17:09 ` Vojtech Pavlik
2005-02-15 17:42 ` Dmitry Torokhov
2005-02-15 17:15 ` Kenan Esau
2005-02-16 18:34 ` Kenan Esau
2005-02-16 21:35 ` Vojtech Pavlik
2005-02-17 14:19 ` Kenan Esau [this message]
2005-02-17 15:04 ` Vojtech Pavlik
2005-02-17 19:42 ` Vojtech Pavlik
2005-02-19 12:54 ` Kenan Esau
2005-02-19 13:16 ` Vojtech Pavlik
2005-02-21 8:06 ` Kenan Esau
2005-02-24 9:03 ` Vojtech Pavlik
2005-03-01 8:11 ` Kenan Esau
2005-03-01 12:08 ` Vojtech Pavlik
2005-03-07 7:27 ` Kenan Esau
2005-03-07 7:34 ` Vojtech Pavlik
2005-03-15 13:25 ` Kenan Esau
2005-03-21 12:44 ` Vojtech Pavlik
2005-03-21 14:52 ` Dmitry Torokhov
2005-03-21 15:31 ` Kenan Esau
2005-03-21 15:44 ` Dmitry Torokhov
2005-03-22 7:13 ` Dmitry Torokhov
2005-03-22 7:14 ` [PATCH 1/4] Lifebook: dmi on x86 only Dmitry Torokhov
2005-03-22 7:15 ` [PATCH 2/4] Lifebook: various cleanups Dmitry Torokhov
2005-03-22 7:16 ` [PATCH 3/4] Lifebook: rearrange init code Dmitry Torokhov
2005-03-22 7:17 ` [PATCH 4/4] psmouse: dynamic protocol switching via sysfs Dmitry Torokhov
2005-04-03 19:49 ` Kenan Esau
2005-04-04 5:45 ` Dmitry Torokhov
2005-04-04 6:48 ` Kenan Esau
2005-03-22 7:29 ` [PATCH 1/4] Lifebook: dmi on x86 only Dave Jones
2005-03-22 7:33 ` Dmitry Torokhov
2005-03-22 14:01 ` Alan Cox
2005-03-22 10:01 ` [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver Andrey Panin
2005-03-22 14:20 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1108649993.2994.18.camel@localhost \
--to=kenan.esau@conan.de \
--cc=dtor_core@ameritech.net \
--cc=harald.hoyer@redhat.de \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox