From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, sensors@Stimpy.netroedge.com
Cc: adobriyan@mail.ru
Subject: [PATCH] I2C: use time_after instead of comparing jiffies
Date: Fri, 4 Mar 2005 12:36:35 -0800 [thread overview]
Message-ID: <11099685952343@kroah.com> (raw)
In-Reply-To: <11099685953642@kroah.com>
ChangeSet 1.2097, 2005/03/02 12:16:37-08:00, adobriyan@mail.ru
[PATCH] I2C: use time_after instead of comparing jiffies
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/i2c/chips/adm1021.c | 5 +++--
drivers/i2c/chips/adm1025.c | 5 ++---
drivers/i2c/chips/adm1026.c | 7 ++++---
drivers/i2c/chips/adm1031.c | 5 +++--
drivers/i2c/chips/asb100.c | 4 ++--
drivers/i2c/chips/ds1621.c | 5 +++--
drivers/i2c/chips/eeprom.c | 4 ++--
drivers/i2c/chips/fscher.c | 4 ++--
drivers/i2c/chips/gl518sm.c | 5 +++--
drivers/i2c/chips/it87.c | 5 +++--
drivers/i2c/chips/lm63.c | 5 ++---
drivers/i2c/chips/lm75.c | 5 +++--
drivers/i2c/chips/lm77.c | 5 +++--
drivers/i2c/chips/lm78.c | 5 +++--
drivers/i2c/chips/lm80.c | 5 ++---
drivers/i2c/chips/lm83.c | 5 ++---
drivers/i2c/chips/lm85.c | 5 +++--
drivers/i2c/chips/lm87.c | 5 ++---
drivers/i2c/chips/lm90.c | 5 ++---
drivers/i2c/chips/max1619.c | 6 ++----
drivers/i2c/chips/pc87360.c | 4 ++--
drivers/i2c/chips/smsc47b397.c | 5 ++---
drivers/i2c/chips/smsc47m1.c | 4 ++--
drivers/i2c/chips/via686a.c | 6 +++---
drivers/i2c/chips/w83627hf.c | 5 +++--
drivers/i2c/chips/w83781d.c | 6 +++---
drivers/i2c/chips/w83l785ts.c | 5 ++---
27 files changed, 68 insertions(+), 67 deletions(-)
diff -Nru a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c
--- a/drivers/i2c/chips/adm1021.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1021.c 2005-03-04 12:24:50 -08:00
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -369,8 +370,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting adm1021 update\n");
data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
diff -Nru a/drivers/i2c/chips/adm1025.c b/drivers/i2c/chips/adm1025.c
--- a/drivers/i2c/chips/adm1025.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1025.c 2005-03-04 12:24:50 -08:00
@@ -49,6 +49,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -505,9 +506,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int i;
dev_dbg(&client->dev, "Updating data.\n");
diff -Nru a/drivers/i2c/chips/adm1026.c b/drivers/i2c/chips/adm1026.c
--- a/drivers/i2c/chips/adm1026.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1026.c 2005-03-04 12:24:50 -08:00
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -573,7 +574,7 @@
down(&data->update_lock);
if (!data->valid
- || (jiffies - data->last_reading > ADM1026_DATA_INTERVAL)) {
+ || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
/* Things that change quickly */
dev_dbg(&client->dev,"Reading sensor values\n");
for (i = 0;i <= 16;++i) {
@@ -620,8 +621,8 @@
data->last_reading = jiffies;
}; /* last_reading */
- if (!data->valid || (jiffies - data->last_config >
- ADM1026_CONFIG_INTERVAL)) {
+ if (!data->valid ||
+ time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
for (i = 0;i <= 16;++i) {
diff -Nru a/drivers/i2c/chips/adm1031.c b/drivers/i2c/chips/adm1031.c
--- a/drivers/i2c/chips/adm1031.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/adm1031.c 2005-03-04 12:24:50 -08:00
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -884,8 +885,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting adm1031 update\n");
for (chan = 0;
diff -Nru a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c
--- a/drivers/i2c/chips/asb100.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/asb100.c 2005-03-04 12:24:50 -08:00
@@ -965,8 +965,8 @@
down(&data->update_lock);
- if (time_after(jiffies - data->last_updated, (unsigned long)(HZ+HZ/2))
- || time_before(jiffies, data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "starting device update...\n");
diff -Nru a/drivers/i2c/chips/ds1621.c b/drivers/i2c/chips/ds1621.c
--- a/drivers/i2c/chips/ds1621.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/ds1621.c 2005-03-04 12:24:50 -08:00
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include "lm75.h"
@@ -284,8 +285,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting ds1621 update\n");
diff -Nru a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
--- a/drivers/i2c/chips/eeprom.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/eeprom.c 2005-03-04 12:24:50 -08:00
@@ -32,6 +32,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -86,8 +87,7 @@
down(&data->update_lock);
if (!(data->valid & (1 << slice)) ||
- (jiffies - data->last_updated[slice] > 300 * HZ) ||
- (jiffies < data->last_updated[slice])) {
+ time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
diff -Nru a/drivers/i2c/chips/fscher.c b/drivers/i2c/chips/fscher.c
--- a/drivers/i2c/chips/fscher.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/fscher.c 2005-03-04 12:24:50 -08:00
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -411,8 +412,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > 2 * HZ) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
dev_dbg(&client->dev, "Starting fscher update\n");
diff -Nru a/drivers/i2c/chips/gl518sm.c b/drivers/i2c/chips/gl518sm.c
--- a/drivers/i2c/chips/gl518sm.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/gl518sm.c 2005-03-04 12:24:50 -08:00
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -505,8 +506,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting gl518 update\n");
data->alarms = gl518_read_value(client, GL518_REG_INT);
diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
--- a/drivers/i2c/chips/it87.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/it87.c 2005-03-04 12:24:50 -08:00
@@ -35,6 +35,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1083,8 +1084,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
if (update_vbat) {
/* Cleared after each update, so reenable. Value
diff -Nru a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c
--- a/drivers/i2c/chips/lm63.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm63.c 2005-03-04 12:24:50 -08:00
@@ -41,6 +41,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -492,9 +493,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
if (data->config & 0x04) { /* tachometer enabled */
/* order matters for fan1_input */
data->fan1_input = i2c_smbus_read_byte_data(client,
diff -Nru a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c
--- a/drivers/i2c/chips/lm75.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm75.c 2005-03-04 12:24:50 -08:00
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include "lm75.h"
@@ -259,8 +260,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting lm75 update\n");
data->temp_input = lm75_read_value(client, LM75_REG_TEMP);
diff -Nru a/drivers/i2c/chips/lm77.c b/drivers/i2c/chips/lm77.c
--- a/drivers/i2c/chips/lm77.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm77.c 2005-03-04 12:24:50 -08:00
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -360,8 +361,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting lm77 update\n");
data->temp_input =
LM77_TEMP_FROM_REG(lm77_read_value(client,
diff -Nru a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c
--- a/drivers/i2c/chips/lm78.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm78.c 2005-03-04 12:24:50 -08:00
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <asm/io.h>
@@ -704,8 +705,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(&client->dev, "Starting lm78 update\n");
diff -Nru a/drivers/i2c/chips/lm80.c b/drivers/i2c/chips/lm80.c
--- a/drivers/i2c/chips/lm80.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm80.c 2005-03-04 12:24:50 -08:00
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -529,9 +530,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > 2 * HZ) ||
- (jiffies < data->last_updated) || !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
dev_dbg(&client->dev, "Starting lm80 update\n");
for (i = 0; i <= 6; i++) {
data->in[i] =
diff -Nru a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c
--- a/drivers/i2c/chips/lm83.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm83.c 2005-03-04 12:24:50 -08:00
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -362,9 +363,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
int nr;
dev_dbg(&client->dev, "Updating lm83 data.\n");
diff -Nru a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
--- a/drivers/i2c/chips/lm85.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm85.c 2005-03-04 12:24:50 -08:00
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1354,7 +1355,7 @@
down(&data->update_lock);
if ( !data->valid ||
- (jiffies - data->last_reading > LM85_DATA_INTERVAL ) ) {
+ time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
/* Things that change quickly */
dev_dbg(&client->dev, "Reading sensor values\n");
@@ -1408,7 +1409,7 @@
}; /* last_reading */
if ( !data->valid ||
- (jiffies - data->last_config > LM85_CONFIG_INTERVAL) ) {
+ time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
diff -Nru a/drivers/i2c/chips/lm87.c b/drivers/i2c/chips/lm87.c
--- a/drivers/i2c/chips/lm87.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm87.c 2005-03-04 12:24:50 -08:00
@@ -56,6 +56,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -713,9 +714,7 @@
down(&data->update_lock);
- if (jiffies - data->last_updated > HZ
- || jiffies < data->last_updated
- || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
int i, j;
dev_dbg(&client->dev, "Updating data.\n");
diff -Nru a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c
--- a/drivers/i2c/chips/lm90.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/lm90.c 2005-03-04 12:24:50 -08:00
@@ -66,6 +66,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -488,9 +489,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
u8 oldh, newh;
dev_dbg(&client->dev, "Updating lm90 data.\n");
diff -Nru a/drivers/i2c/chips/max1619.c b/drivers/i2c/chips/max1619.c
--- a/drivers/i2c/chips/max1619.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/max1619.c 2005-03-04 12:24:50 -08:00
@@ -30,6 +30,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -324,10 +325,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2) ||
- (jiffies < data->last_updated) ||
- !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Updating max1619 data.\n");
data->temp_input1 = i2c_smbus_read_byte_data(client,
MAX1619_REG_R_LOCAL_TEMP);
diff -Nru a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c
--- a/drivers/i2c/chips/pc87360.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/pc87360.c 2005-03-04 12:24:50 -08:00
@@ -37,6 +37,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1174,8 +1175,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ * 2)
- || (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
dev_dbg(&client->dev, "Data update\n");
/* Fans */
diff -Nru a/drivers/i2c/chips/smsc47b397.c b/drivers/i2c/chips/smsc47b397.c
--- a/drivers/i2c/chips/smsc47b397.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/smsc47b397.c 2005-03-04 12:24:50 -08:00
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/init.h>
@@ -130,9 +131,7 @@
down(&data->update_lock);
- if (time_after(jiffies - data->last_updated, (unsigned long)HZ)
- || time_before(jiffies, data->last_updated) || !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
dev_dbg(&client->dev, "starting device update...\n");
/* 4 temperature inputs, 4 fan inputs */
diff -Nru a/drivers/i2c/chips/smsc47m1.c b/drivers/i2c/chips/smsc47m1.c
--- a/drivers/i2c/chips/smsc47m1.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/smsc47m1.c 2005-03-04 12:24:50 -08:00
@@ -28,6 +28,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/init.h>
@@ -527,8 +528,7 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || init) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
int i;
for (i = 0; i < 2; i++) {
diff -Nru a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
--- a/drivers/i2c/chips/via686a.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/via686a.c 2005-03-04 12:24:50 -08:00
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/init.h>
@@ -726,9 +727,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
-
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
for (i = 0; i <= 4; i++) {
data->in[i] =
via686a_read_value(client, VIA686A_REG_IN(i));
diff -Nru a/drivers/i2c/chips/w83627hf.c b/drivers/i2c/chips/w83627hf.c
--- a/drivers/i2c/chips/w83627hf.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/w83627hf.c 2005-03-04 12:24:50 -08:00
@@ -40,6 +40,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1371,8 +1372,8 @@
down(&data->update_lock);
- if ((jiffies - data->last_updated > HZ + HZ / 2) ||
- (jiffies < data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
for (i = 0; i <= 8; i++) {
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
diff -Nru a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
--- a/drivers/i2c/chips/w83781d.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/w83781d.c 2005-03-04 12:24:50 -08:00
@@ -39,6 +39,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
@@ -1609,9 +1610,8 @@
down(&data->update_lock);
- if (time_after
- (jiffies - data->last_updated, (unsigned long) (HZ + HZ / 2))
- || time_before(jiffies, data->last_updated) || !data->valid) {
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
dev_dbg(dev, "Starting device update\n");
for (i = 0; i <= 8; i++) {
diff -Nru a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c
--- a/drivers/i2c/chips/w83l785ts.c 2005-03-04 12:24:50 -08:00
+++ b/drivers/i2c/chips/w83l785ts.c 2005-03-04 12:24:50 -08:00
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
@@ -294,9 +295,7 @@
down(&data->update_lock);
- if (!data->valid
- || (jiffies - data->last_updated > HZ * 2)
- || (jiffies < data->last_updated)) {
+ if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
dev_dbg(&client->dev, "Updating w83l785ts data.\n");
data->temp = w83l785ts_read_value(client,
W83L785TS_REG_TEMP, data->temp);
next prev parent reply other threads:[~2005-03-04 22:06 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-04 20:35 [BK PATCH] I2C patches for 2.6.11 Greg KH
2005-03-04 20:36 ` [PATCH] I2C: add fscpos chip driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Allow it87 pwm reconfiguration Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Fix up some build warnings in the fscpos driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Kill i2c_client.id (1/5) Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Kill i2c_client.id (2/5) Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Kill i2c_client.id (3/5) Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Kill i2c_client.id (4/5) Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Kill i2c_client.id (5/5) Greg KH
2005-03-04 20:36 ` [PATCH] I2C: just delete the id field, let's not delay it any longer Greg KH
2005-03-04 20:36 ` [PATCH] I2C: fix for fscpos voltage values Greg KH
2005-03-04 20:36 ` [PATCH] I2C: i2c-dev namespace cleanup Greg KH
2005-03-04 20:36 ` [PATCH] I2C: lm78 driver improvement Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Enable w83781d and w83627hf temperature channels Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Kill unused includes in i2c-sensor-detect.c Greg KH
2005-03-04 20:36 ` [PATCH] I2C: unnecessary #includes in asb100.c Greg KH
2005-03-04 20:36 ` [PATCH] I2C: lm80 driver improvement Greg KH
2005-03-04 20:36 ` [PATCH] i2c-core.c: make some code static Greg KH
2005-03-04 20:36 ` Greg KH [this message]
2005-03-04 20:36 ` [PATCH] I2C: add ST M41T00 I2C RTC chip driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: New chip driver: sis5595 Greg KH
2005-03-04 20:36 ` [PATCH] I2C: add Marvell mv64xxx i2c driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: add GL520SM Sensor Chip driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: improve debugging output Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Enable I2C_PIIX4 for 64-bit platforms Greg KH
2005-03-04 20:36 ` [PATCH] I2C: fix typo in drivers/i2c/busses/i2c-ixp4xx.c Greg KH
2005-03-04 20:36 ` [PATCH] I2C i2c-nforce2: add support for nForce4 (patch against 2.6.11-rc4) Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Remove NULL client checks in rtc8564 driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Make i2c list terminators explicitely unsigned Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Fix some gcc 4.0 compile failures and warnings Greg KH
2005-03-04 20:36 ` [PATCH] I2C: S3C2410 missing I2C_CLASS_HWMON Greg KH
2005-03-04 20:36 ` [PATCH] I2C: minor I2C cleanups Greg KH
2005-03-04 20:36 ` [PATCH] Add class definition to the elektor bus driver Greg KH
2005-03-04 20:36 ` [PATCH] I2C: saa7146 build fix Greg KH
2005-03-04 20:36 ` [PATCH] I2C: w83627hf needs i2c-isa Greg KH
2005-03-04 20:36 ` [PATCH] I2C: fixed up the i2c-id.h algo ids Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Change of i2c co-maintainer Greg KH
2005-03-04 20:36 ` [PATCH] I2C: Trivial indentation fix in i2c/chips/Kconfig Greg KH
2005-03-04 22:55 ` [PATCH] I2C: Fix some gcc 4.0 compile failures and warnings Mickey Stein
2005-03-04 23:02 ` Greg KH
2005-03-05 5:57 ` [RFQ] Rules for accepting patches into the linux-releases tree Shawn Starr
2005-03-05 6:11 ` Randy.Dunlap
2005-03-05 16:33 ` Greg KH
2005-03-24 6:39 ` [2.6.11.5][BUILD] i2c.h breakage in 2.6.12-rc1 + -mm only Shawn Starr
2005-03-24 8:03 ` Greg KH
2005-03-05 11:59 ` [BK PATCH] I2C patches for 2.6.11 Jean Delvare
2005-03-06 6:55 ` Greg KH
2005-03-07 8:50 ` Adrian Bunk
2005-03-08 8:41 ` Domen Puncer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11099685952343@kroah.com \
--to=greg@kroah.com \
--cc=adobriyan@mail.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@Stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox