2.6.12-rc1-mm3

2.6.12-rc1-mm3

[Andrew Morton]

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/

- Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.

- Again, we'd like people who have had recent DRM and USB resume problems to
  test and report, please.

- The bk-ide-dev tree is back after a couple of weeks of difficulties.

- Jeff asks that anyone who has had problems with the Silicon Image SATA
  drivers test sata_sil-corruption--lockup-fix.patch, which is included in
  this kernel.



Changes since 2.6.12-rc1-mm2:


 linus.patch
 bk-acpi.patch
 bk-agpgart.patch
 bk-alsa.patch
 bk-arm.patch
 bk-audit.patch
 bk-cifs.patch
 bk-cpufreq.patch
 bk-cryptodev.patch
 bk-driver-core.patch
 bk-driver-core-hang-fix.patch
 bk-drm.patch
 bk-drm-via.patch
 bk-i2c.patch
 bk-ia64.patch
 bk-ide-dev.patch
 bk-ieee1394.patch
 bk-input.patch
 bk-jfs.patch
 bk-kbuild.patch
 bk-libata.patch
 bk-mtd.patch
 bk-net.patch
 bk-netdev.patch
 bk-nfs.patch
 bk-nfs-gcc4-fix.patch
 bk-ntfs.patch
 bk-pci.patch
 bk-scsi.patch
 bk-scsi-rc-fixes.patch
 bk-serial.patch
 bk-usb.patch
 bk-watchdog.patch
 bk-xfs.patch

 Latest versions of sudsystem trees

-fix-agp_backend-usage-in-drm_agp_init.patch
-drm-ioctl-fix.patch
-zd1201-makefile-fix.patch

 Merged

-agp-make-some-code-static.patch

 Dropped - it broke things.

+powernow-k7recalibrate-cpu_khz.patch
+cpufreq-timers-recalibrate_cpu_khz.patch

 cpufreq fixes

+bk-driver-core-hang-fix.patch

 Fix for new sysfs/kobject locking code

+sata_sil-corruption--lockup-fix.patch

 Silicon Image SATA fixes

+bk-nfs-gcc4-fix.patch

 Fix bk-nfs for gcc4

+drivers-pci-hotplug-cpqphp_corec-fix-a-check-after-use.patch
+drivers-usb-misc-usbtestc-fix-a-null-dereference.patch

 use-after-free buglets which the compiler was hiding.

+ub-atomicity-fix.patch

 Fix sleep-while-atomic in the new usb block driver ub.c

+usb_cdc-build-fix.patch

 Compile fix

+freepgt-hugetlb_free_pgd_range-fix-aio-panic-fix.patch

 Fix freepgt-hugetlb_free_pgd_range.patch for
 ppc64-fix-aio-panic-caused-by-is_hugepage_only_range.patch

+drivers-net-amd8111ec-fix-napi-interrupt-in-poll.patch

 net driver NAPI fix

+ipv6-fix-address-interface-handling-according-to-the-scoping-architecture.patch

 Fix ipv6 connections to the local address

+drivers-net-wireless-airoc-correct-a-wrong-check.patch

 airo fixlet

+ppc32-report-chipset-version-in-common-proc-cpuinfo-handling-fix.patch

 ppc32 build fix

+ppc32-fix-broken-compile-on-sky-computers-hdpu-platform.patch
+ppc32-8xx-typo-fix.patch

 ppc32 fixes

+ppc64-fix-lpar-iommu-setup-code-for-p630.patch

 ppc64 fix

+mips-update-vr41xx-rtc-support.patch

 MIPS fix

-via-irq-fixup-fix-warning-fix.patch

 Folded into the new version of x86-via-workaround.patch

-x86_64-separate-amd-cmp-detection-from-hyper-threading.patch

 This conflicted with the Intel cpu type detection patches

+x86_64-nop-out-system-call-instruction-in-vsyscall-page-fix.patch

 Fix x86_64-nop-out-system-call-instruction-in-vsyscall-page.patch

+x86_64-fix-missing-delay-when-the-tsc-counter-just.patch

 x86_64 fix

+x86_64-show_stack-touch_nmi_watchdog.patch

 I was having inexplicable soft-lockup-detector timeouts during sysrq-t over
 9600 baud serial.  Don't know if this fixes it though.

+s390-kernel-faults.patch
+s390-signal-stack-bug.patch
+s390-dasd-preferred-path-support.patch
+s390-qeth-layer2-fixes.patch
+s390-qeth-1920-device-support.patch
+s390-qeth-blkt-tuning.patch
+s390-qeth-tcp-segmentation-offload.patch
+s390-claw-network-device-driver.patch

 s/390 updates

+relayfs-properly-handle-oversized-events.patch

 relayfs fix

-keys-pass-session-keyring-to-call_usermodehelper-warning-fix.patch

 Unneeded

+keys-pass-session-keyring-to-call_usermodehelper-fix.patch

 Fix stuff in the new keys-pass-session-keyring-to-call_usermodehelper.patch

+fs-attrc-fix-check-after-use.patch
+fs-smbfs-requestc-fix-null-dereference.patch

 More fixlets derived from the Coverity tool (does this thing have a name?)

+sched-uninline-task_timeslice.patch

 Uninline a scheduler function.

-wbsd-update.patch

 rmk spat this back.

+doc-where-to-find-ldd3.patch

 Add a pointer to the Linux Device Drivers book.

+fuse-device-functions-comments-and-documentation.patch
+fuse-device-functions-cleanup.patch
+fuse-mount-options-comments-and-documentation.patch
+fuse-mount-options-fix-cleanup.patch

 FUSE fixes and cleanups

+sound-oss-rme96xxc-remove-kernel-22-ifs.patch
+drivers-char-mwave-tp3780ic-remove-kernel-22-ifs.patch
+drivers-net-skfp-cleanups.patch

 Little fixes and cleansup

+remove-exports-for-oem-modules.patch
+mm-page_allocc-unexport-nr_swap_pages.patch
+unexport-console_unblank.patch
+mm-swapc-unexport-vm_acct_memory.patch
+mm-swapfilec-unexport-total_swap_pages.patch
+mm-swap_statec-unexport-swapper_space.patch
+unexport-slab_reclaim_pages.patch
+net-atm-resourcesc-remove-__free_atm_dev.patch

 unexport some symbols.



number of patches in -mm: 867
number of changesets in external trees: 743
number of patches in -mm only: 834
total patches: 1577



All 867 patches:

linus.patch

pcmcia-properly-bail-out-on-mtd-related-ioctl-invocation.patch
  pcmcia: properly bail out on MTD-related ioctl invocation

pcmcia-dont-lock-up-in-rsrc_nonstatic-pcmcia_validate_mem.patch
  pcmcia: don't lock up in rsrc_nonstatic pcmcia_validate_mem

pcmcia-dont-send-eject-request-events-to-userspace.patch
  pcmcia: don't send eject request events to userspace

ppc64-preliminary-changes-to-of-fixup-functions.patch
  ppc64: preliminary changes to OF fixup functions

ppc64-make-of-node-fixup-code-usable-at-runtime.patch
  ppc64: make OF node fixup code usable at runtime

ppc64-introduce-pseries_reconfig.patch
  ppc64: introduce pSeries_reconfig.[ch]

ppc64-promc-use-pseries-reconfig-notifier.patch
  ppc64: prom.c: use pSeries reconfig notifier

ppc64-fix-aio-panic-caused-by-is_hugepage_only_range.patch
  ppc64: fix AIO panic on PPC64 caused by is_hugepage_only_range()

handle-multiple-video-cards-on-the-same-bus.patch
  handle multiple video cards on the same bus

tty-overrun-time-fix.patch
  tty overrun time fix

ia64-msi-warning-fixes.patch
  ia64 msi warning fixes

ia64-config_apci_numa-fix.patch
  ia64 CONFIG_APCI_NUMA fix

bk-acpi.patch

acpi-ec-warning-fix.patch
  acpi ec.c warning fix

acpi-toshiba-failure-handling.patch
  acpi: Toshiba failure handling

acpi-video-pointer-size-fix.patch
  acpi video pointer size fix

acpi-create_polling_proc-fix.patch
  acpi: create_polling_proc() fix

bk-agpgart.patch

agp-fix-for-xen-vmm.patch
  AGP fix for Xen VMM

bk-alsa.patch

include-linux-soundcardh-endianness-fix.patch
  include/linux/soundcard.h: endianness fix

bk-arm.patch

arm-atomic_sub_and_test.patch
  arm atomic_sub_and_test()

bk-audit.patch

bk-cifs.patch

bk-cpufreq.patch

powernow-k7recalibrate-cpu_khz.patch
  powernowk7: recalibrate cpu_khz

cpufreq-timers-recalibrate_cpu_khz.patch
  cpufreq timers: recalibrate cpu_khz

bk-cryptodev.patch

bk-driver-core.patch

export-platform_add_devices.patch
  export platform_add_devices

bk-driver-core-hang-fix.patch
  bk-driver-core hang fix

bk-drm.patch

3dfx-drm-depends-on-pci.patch
  3dfx DRM depends on PCI

bk-drm-via.patch

bk-i2c.patch

bk-ia64.patch

bk-ide-dev.patch

bk-ieee1394.patch

bk-input.patch

alps-printk-tidy.patch
  alps-printk-tidy

bk-jfs.patch

bk-kbuild.patch

uml-make-deb-pkg-build-target-build-a-debian-style-user-mode-linux-package.patch
  uml: make deb-pkg build target build a Debian-style user-mode-linux package

uml-restore-proper-descriptions-in-make-deb-pkg-target.patch
  UML - Restore proper descriptions in make deb-pkg target

doc-describe-kbuild-pitfall.patch
  doc: describe Kbuild pitfall

complete-cpufreq-kconfig-cleanup.patch
  complete cpufreq Kconfig cleanup

bk-libata.patch

sata_sil-corruption--lockup-fix.patch
  sata_sil corruption / lockup fix

bk-mtd.patch

bk-net.patch

bk-netdev.patch

bk-nfs.patch

bk-nfs-gcc4-fix.patch
  nfs4 build fix

nfs4-empty-array-fix.patch
  nfs4 empty array fix

bk-ntfs.patch

bk-pci.patch

debug-for-pci-io-mem-allocation.patch
  DEBUG for PCI IO & MEM allocation

pci-pci-transparent-bridge-handling-improvements-pci-core.patch
  PCI-PCI transparent bridge handling improvements (pci core)

pci-pci-transparent-bridge-handling-improvements-yenta_socket.patch
  PCI-PCI transparent bridge handling improvements (yenta_socket)

acpi-bridge-hotadd-acpi-based-root-bridge-hot-add.patch
  acpi bridge hotadd: ACPI based root bridge hot-add

acpi-bridge-hotadd-fix-pci_enable_device-for-p2p-bridges.patch
  acpi bridge hotadd: Fix pci_enable_device() for p2p bridges

acpi-bridge-hotadd-make-pcibios_fixup_bus-hot-plug-safe.patch
  acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe

acpi-bridge-hotadd-prevent-duplicate-bus-numbers-when-scanning-pci-bridge.patch
  acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge

acpi-bridge-hotadd-take-the-pci-lock-when-modifying-pci-bus-or-device-lists.patch
  acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists

acpi-bridge-hotadd-link-newly-created-pci-child-bus-to-its-parent-on-creation.patch
  acpi bridge hotadd: Link newly created pci child bus to its parent on creation

acpi-bridge-hotadd-make-the-pci-remove-routines-safe-for-failed-hot-plug.patch
  acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug

acpi-bridge-hotadd-remove-hot-plugged-devices-that-could-not-be-allocated-resources.patch
  acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources

acpi-bridge-hotadd-read-bridge-resources-when-fixing-up-the-bus.patch
  acpi bridge hotadd: Read bridge resources when fixing up the bus

acpi-bridge-hotadd-allow-acpi-add-and-start-operations-to-be-done-independently.patch
  acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently

acpi-bridge-hotadd-export-the-interface-to-get-pci-id-for-an-acpi-handle.patch
  acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle

drivers-pci-hotplug-cpqphp_corec-fix-a-check-after-use.patch
  drivers/pci/hotplug/cpqphp_core.c: fix a check after use

bk-scsi.patch

megaraid_sas-announcing-new-module-for.patch
  megaraid_sas: Announcing new module for LSI Logic's SAS based MegaRAID controllers

open-iscsi-scsi.patch
  open-iscsi-scsi

open-iscsi-headers.patch
  open-iscsi-headers

open-iscsi-kconfig.patch
  open-iscsi-kconfig

open-iscsi-makefile.patch
  open-iscsi-makefile

open-iscsi-netlink.patch
  open-iscsi-netlink

open-iscsi-doc.patch
  open-iscsi-doc

bk-scsi-rc-fixes.patch

add-scsi-changer-driver.patch
  add scsi changer driver

scsi-ch-build-fix.patch
  scsi ch.c build fix

bk-serial.patch

bk-usb.patch

ub-atomicity-fix.patch
  ub: atomicity fix

drivers-usb-misc-usbtestc-fix-a-null-dereference.patch
  drivers/usb/misc/usbtest.c: fix a NULL dereference

usb_cdc-build-fix.patch
  usb_cdc build fix

usb-resume-fixes.patch
  usb resume fixes

usb-suspend-updates-interface-suspend.patch
  usb suspend updates (interface suspend)

hcd-suspend-uses-pm_message_t.patch
  hcd suspend uses pm_message_t

zd1201-build-fix.patch
  zd1201 build fix

usb-support-for-new-ipod-mini-and-possibly-others.patch
  usb: support for new ipod mini (and possibly others)

usb-wacom-driver-update.patch
  usb: wacom driver update

bk-watchdog.patch

bk-xfs.patch

mm.patch
  add -mmN to EXTRAVERSION

fix-help-for-acpi_container.patch
  Fix help for ACPI_CONTAINER

swapspace-layout-improvements.patch
  swapspace-layout-improvements
  /proc/swaps negative Used

bdi-provide-backing-device-capability-information.patch
  BDI: Provide backing device capability information [try #3]

cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix.patch
  cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix

add-a-clear_pages-function-to-clear-pages-of-higher.patch
  add a clear_pages function to clear pages of higher order

slab-kmalloc-cleanups.patch
  slab.[ch]: kmalloc() cleanups

slab-64bit-fix.patch
  slab: 64-bit fix

vmscan-move-code-to-isolate-lru-pages-into-separate-function.patch
  vmscan: move code to isolate LRU pages into separate function

mm-counter-operations-through-macros.patch
  mm counter operations through macros

mm-counter-operations-through-macros-tidy.patch
  mm-counter-operations-through-macros-tidt

vmscan-notice-slab-shrinking.patch
  vmscan: notice slab shrinking

slab-shrinkers-use-vfs_cache_pressure.patch
  slab shrinkers: use vfs_cache_pressure

madvise-do-not-split-the-maps.patch
  madvise: do not split the maps

madvise-merge-the-maps.patch
  madvise: merge the maps

include-cleanup-in-pgalloch.patch
  include cleanup in pgalloc.h

fix-mmap-of-dev-kmem.patch
  Fix mmap of /dev/kmem

unused-size-assignment-in-filemap_nopage.patch
  unused 'size' assignment in filemap_nopage

freepgt-free_pgtables-use-vma-list.patch
  freepgt: free_pgtables use vma list

freepgt-remove-mm_vm_sizemm.patch
  freepgt: remove MM_VM_SIZE(mm)

freepgt-hugetlb_free_pgd_range.patch
  freepgt: hugetlb_free_pgd_range

freepgt-hugetlb_free_pgd_range-fix-aio-panic-fix.patch
  ppc64-fix-aio-panic-caused-by-is_hugepage_only_range-ia64-fix

freepgt-remove-arch-pgd_addr_end.patch
  freepgt: remove arch pgd_addr_end

freepgt-mpnt-to-vma-cleanup.patch
  freepgt: mpnt to vma cleanup

freepgt-hugetlb-area-is-clean.patch
  freepgt: hugetlb area is clean

eni155p-error-handling-fix.patch
  ENI155P error handling fix

remove-last_rx-update-from-loopback-device.patch
  remove last_rx update from loopback device

a-new-10gb-ethernet-driver-by-chelsio-communications.patch
  A new 10GB Ethernet Driver by Chelsio Communications

a-new-10gb-ethernet-driver-by-chelsio-communications-update.patch
  A new 10GB Ethernet Driver by Chelsio Communications (update)

pcnet32-bug-79c975-fiber-fix.patch
  pcnet32 79C975 fiber fix

dm9000-network-driver.patch
  DM9000 network driver

null-pointer-bug-in-netpollc.patch
  NULL pointer bug in netpoll.c

restore-ports-module-parameter-for-ip_nat_ftp-and-ip_nat_irc.patch
  Restore ports module parameter for ip_nat_ftp and ip_nat_irc

e1000-flush-work-queues-on-remove.patch
  e1000: flush work queues on remove

ipt-leak-fix.patch
  memory leak in net/sched/ipt.c?

drivers-net-amd8111ec-fix-napi-interrupt-in-poll.patch
  drivers/net/amd8111e.c: fix NAPI interrupt in poll

ipv6-fix-address-interface-handling-according-to-the-scoping-architecture.patch
  ipv6: Fix address/interface handling according to the scoping architecture

drivers-net-wireless-airoc-correct-a-wrong-check.patch
  drivers/net/wireless/airo.c: correct a wrong check

selinux-make-code-static-and-remove-unused-code.patch
  SELinux: make code static and remove unused code

selinux-allow-mounting-of-filesystems-with-invalid-root-inode-context.patch
  SELinux: allow mounting of filesystems with invalid root inode context

selinux-audit-unrecognized-netlink-messages.patch
  SELinux: audit unrecognized netlink messages

selinux-add-name_connect-permission-check.patch
  SELinux: add name_connect permission check

ppc32-fix-mv64x60-internal-sram-size.patch
  ppc32: Fix mv64x60 internal SRAM size

ppc32-move-83xx-85xx-device-and-system-description-files.patch
  ppc32: Move 83xx & 85xx device and system description files

ppc32-fix-config_serial_text_debug-support-on-83xx.patch
  ppc32: Fix CONFIG_SERIAL_TEXT_DEBUG support on 83xx

ppc32-typo-fix-in-load-store-string-emulation.patch
  ppc32: typo fix in load/store string emulation

ppc32-report-chipset-version-in-common-proc-cpuinfo-handling.patch
  ppc32: Report chipset version in common /proc/cpuinfo handling

ppc32-report-chipset-version-in-common-proc-cpuinfo-handling-fix.patch
  ppc32-report-chipset-version-in-common-proc-cpuinfo-handling fix

ppc32-dmasound-compilation-fix.patch
  ppc32: dmasound compilation fix

ppc32-fix-sandpoint-soft-reboot.patch
  ppc32: Fix Sandpoint Soft Reboot

ppc32-64-map-prefetchable-pci-without-guarded-bit.patch
  ppc32/64: Map prefetchable PCI without guarded bit

ppc32-fix-broken-compile-on-sky-computers-hdpu-platform.patch
  ppc32: fix broken compile on Sky Computers HDPU platform

ppc32-8xx-typo-fix.patch
  ppc32: 8xx typo fix

ppc64-pci_dnc-use-pseries-reconfig-notifier.patch
  ppc64: pci_dn.c: use pSeries reconfig notifier

ppc64-pseries_iommuc-use-pseries-reconfig-notifier.patch
  ppc64: pSeries_iommu.c: use pSeries reconfig notifier

ppc64-fix-gcc4-compile-error-in-pacah.patch
  ppc64: fix gcc4 compile error in paca.h

ppc64-fix-compile-error-in-promc.patch
  ppc64: fix compile error in prom.c

ppc64-fix-linkage-error-on-g5.patch
  ppc64: fix linkage error on G5

ppc64-fix-semtimedop-compat-syscall.patch
  ppc64: fix semtimedop compat syscall

ppc64-fix-pseries-hcall-stubs.patch
  ppc64: fix pseries hcall stubs

ppc64-make-numa=off-command-line-argument-work-again.patch
  ppc64: Make numa=off command line argument work again

ppc64-fix-ethernet-phy-reset-on-imac-g5.patch
  ppc64: Fix ethernet PHY reset on iMac G5

ppc64-fix-lpar-iommu-setup-code-for-p630.patch
  PPC64: Fix LPAR IOMMU setup code for p630

mips-linkage-fix.patch
  mips linkage fix

mips-update-vr41xx-rtc-support.patch
  mips: update VR41xx RTC support

x86-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
  x86: reduce cacheline bouncing in cpu_idle_wait

x86-cmos-time-update-optimisation.patch
  x86: CMOS time update optimisation

x86-cmos-time-update-optimisation-tidy.patch
  x86-cmos-time-update-optimisation-tidy

x86-cmos-time-update-optimisation-locking-fix.patch
  x86-cmos-time-update-optimisation locking fix

x86-cmos-time-update-optimisation-locking-fix-check.patch
  x86-cmos-time-update-optimisation-locking-fix-check

x86-via-workaround.patch
  x86: via workaround

apm-fix-interrupts-enabled-in-device_power_up.patch
  APM: fix interrupts enabled in device_power_up

rtc_lock-is-irq-safe.patch
  rtc_lock is irq-safe

fix-put_user-for-80386.patch
  fix put_user for 80386

es7000-legacy-mappings-update.patch
  ES7000 Legacy Mappings Update

x86-fix-esp-corruption-cpu-bug-take-2.patch
  x86: fix ESP corruption CPU bug (take 2)

x86-fix-esp-corruption-cpu-bug-take-2-fix.patch
  x86-fix-esp-corruption-cpu-bug-take-2 fix

es7000-dmi-cleanup.patch
  es7000 dmi cleanup

i386-add-kstack=n-option-from-x86_64.patch
  i386: add kstack=N option (from x86_64)

reduce-inlined-x86-memcpy-by-2-bytes.patch
  x86: reduce inlined memcpy by 2 bytes

rename-fpu_verify_area-to-fpu_access_ok.patch
  rename FPU_*verify_area to FPU_*access_ok

x86_64-update-defconfig.patch
  x86_64: Update defconfig

x86_64-add-new-amd-cpuid-flags-to-cpuinfo.patch
  x86_64: Add new AMD cpuid flags to cpuinfo

x86_64-add-an-64bit-entry-path-for-exec.patch
  x86_64: Add an 64bit entry path for exec

x86_64-busses-array-is-only-indexed-with-a-8bit-value.patch
  x86_64: Busses array is only indexed with a 8bit value, doesn't make sense

x86_64-fix-compilation-with-config_proc_fs=n.patch
  x86_64: Fix compilation with CONFIG_PROC_FS=n

x86_64-move-hpet-selection-into-processor-specific.patch
  x86_64: Move HPET selection into processor specific options

x86_64-remove-never-used-obsolete-file.patch
  x86_64: Remove never used obsolete file

x86_64-fix-indentation-in-vsyscallc-no-functional.patch
  x86_64: Fix indentation in vsyscall.c. No functional changes.

x86_64-nop-out-system-call-instruction-in-vsyscall-page.patch
  x86_64: Nop out system call instruction in vsyscall page when not needed

x86_64-nop-out-system-call-instruction-in-vsyscall-page-fix.patch
  x86_64: fix vsyscall.c syntax error

x86_64-remove-obsolete-comments-in-vsyscallc-and-fix.patch
  x86_64: Remove obsolete comments in vsyscall.c and fix some others.

x86_64-remove-noisy-printk-in-k8-bus-detection-code.patch
  x86_64: Remove noisy printk in K8 bus detection code

x86_64-remove-unused-and-broken-code-in-ioh.patch
  x86_64: Remove unused and broken code in io.h

x86_64-remove-stale-unused-file.patch
  x86_64: Remove stale unused file

x86_64-move-put_user-out-of-line.patch
  x86_64: Move put_user out of line

x86_64-give-out-of-line-get_user-better-calling.patch
  x86_64: Give out of line get_user better calling conventions

x86_64-work-around-tyan-bios-mtrr-initialization-bug.patch
  x86_64: Work around Tyan BIOS MTRR initialization bug.

x86_64-include-pci-express-configuration.patch
  x86_64: Include PCI-Express configuration

x86_64-cleanups-in-new-backtrace-code-in-oprofile.patch
  x86_64: Cleanups in new backtrace code in oprofile

x86_64-fix-special-isa-case-in-iounmap.patch
  x86_64: Fix special ISA case in iounmap()

x86_64-fix-formatting-and-white-space-in-signal-code.patch
  x86_64: Fix formatting and white space in signal code

x86_64-mem=xxx-will-now-limit-kernel-memory-to-xxx.patch
  x86_64: mem=XXX will now limit kernel memory to XXX instead of XXX+1MB

x86_64-resume-pit-for-x86_64.patch
  x86_64: resume PIT for x86_64

x86_64-fix-nmi-rtc-access-race.patch
  x86_64: Fix NMI RTC access race

x86_64-minor-fix-to-tlb-flush-ipi.patch
  x86_64: Minor fix to TLB flush IPI

x86_64-always-reload-cr3-completely-when-a-lazy-mm.patch
  x86_64: Always reload CR3 completely when a lazy MM thread drops a MM.

x86_64-fix-ldt-descriptor.patch
  x86_64: Fix LDT descriptor

x86_64-change-the-y2069-bug-in-the-rtc-timer-code-to-be.patch
  x86_64: Change the y2069 bug in the RTC timer code to be a y2100 bug.

x86_64-only-free-pmds-and-puds-after-other-cpus-have.patch
  x86_64: Only free PMDs and PUDs after other CPUs have been flushed

x86_64-dont-enable-interrupts-in-oopses.patch
  x86_64: Don't enable interrupts in oopses unconditionally

x86_64-fix-smp-fallback-to-up.patch
  x86_64: Fix SMP fallback to UP

x86_64-fix-config_preempt.patch
  x86_64: Fix CONFIG_PREEMPT

x86_64-fix-exception-stack-detection-during-backtraces.patch
  x86_64: Fix exception stack detection during backtraces

x86_64-fix-gcc-34-warning-in-bitopsc.patch
  x86_64: Fix gcc 3.4 warning in bitops.c

x86_64-fix-missing-delay-when-the-tsc-counter-just.patch
  x86_64: Fix missing delay when the TSC counter just   overflowed

x86_64-clean-up-the-iommu-initialisation-a-bit.patch
  x86_64: Clean up the IOMMU initialisation a bit

x86-64-kconfig-typo-trivial.patch
  x86-64: kconfig typo

x86_64-remove-old-decl-trivial.patch
  x86_64: remove old decl (trivial)

x86_64-avoid-panic-lockup.patch
  x86_64: avoid panic lockup

x86_64-hugetlb-fix.patch
  x86_64: hugetlb fix

x86-64-forgot-asmlinkage-on-sys_mmap.patch
  x86-64: forgot asmlinkage on sys_mmap

x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
  x86_64: reduce cacheline bouncing in cpu_idle_wait

x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix.patch
  x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix

x86-64-kprobes-handle-%rip-relative-addressing-mode.patch
  x86-64 kprobes: handle %RIP-relative addressing mode

kernel-parameters-ia-32-x86-64-cleanups.patch
  kernel-parameters: IA-32/X86-64 cleanups

x86-x86_64-reading-deterministic-cache-parameters-and-exporting-it-in-sysfs.patch
  x86, x86_64: reading deterministic cache parameters and exporting it in /sysfs

x86-x86_64-intel-dual-core-detection.patch
  x86, x86_64: Intel dual-core detection

x86-cacheline-alignment-for-cpu-maps.patch
  x86: cacheline alignment for cpu maps

x86_64-dump-stack-in-early-exception.patch
  x86_64-dump-stack-in-early-exception

x86_64-show_stack-touch_nmi_watchdog.patch
  x86_64-show_stack-touch_nmi_watchdog

alpha-spinlockh-update.patch
  alpha spinlock.h update

ia64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
  ia64: reduce cacheline bouncing in cpu_idle_wait

ia64-reduce-cacheline-bouncing-in-cpu_idle_wait-fix.patch
  ia64-reduce-cacheline-bouncing-in-cpu_idle_wait fix

swsusp-add-missing-refrigerator-calls.patch
  swsusp: Add missing refrigerator calls

suspend-to-ram-update-videotxt-with-more-systems.patch
  suspend-to-ram: update video.txt with more systems

pm-remove-obsolete-pm_-from-vtc.patch
  pm: remove obsolete pm_* from vt.c

swsusp-small-updates.patch
  swsusp: small updates

swsusp-1-1-kill-swsusp_restore.patch
  swsusp: kill swsusp_restore

m32r-update-mmu-less-support-1.patch
  m32r: Update MMU-less support #1

m32r-update-mmu-less-support-2.patch
  m32r: Update MMU-less support #2

m32r-update-mmu-less-support-3.patch
  m32r: Update MMU-less support #3

m32r-fix-m32102-i-cache-invalidation.patch
  m32r: Fix M32102 I-cache invalidation

m32r_sio-driver-update.patch
  m32r_sio driver update

m68k-update-signal-delivery-handling.patch
  M68k: Update signal delivery handling

m68k-stdma-replace-sleep_on-with-wait_event.patch
  M68k/stdma: Replace sleep_on() with wait_event()

zorro-replace-printk-with-pr_info-in-drivers-zorro-zorroc.patch
  Zorro: replace printk() with pr_info() in drivers/zorro/zorro.c

mac-ncr5380-scsi-fix-bus-error.patch
  Mac NCR5380 SCSI: Fix bus error

m68k-ip-checksum-updates.patch
  M68k: IP checksum updates

sun-3-3x-enable-sun-partition-tables-support-by-default.patch
  Sun-3/3x: Enable Sun partition tables support by default

m68k-add-missing-pieces-of-thread-info-tif_memdie-support.patch
  M68k: Add missing pieces of thread info TIF_MEMDIE support

tpm-depends-on-pci.patch
  TPM depends on PCI

uml-cope-with-uml_net-security-fix-2.patch
  uml: cope with uml_net security fix

uml-fix-compile.patch
  uml: fix compile

uml-cpu_relax-fix.patch
  uml: cpu_relax fix

uml-extend-cmd-line-limits.patch
  uml: extend cmd line limits

uml-disable-more-hardware-kconfig-opt-and-rename-usermode-to-uml.patch
  uml: disable more hardware kconfig opt and rename USERMODE to UML

uml-little-build-fixes.patch
  Uml: little build fixes

uml-factor-out-common-code-in-user-obj-handling.patch
  uml: factor out common code in user-obj handling

uml-kbuild-link-cmd.patch
  uml - kbuild: link cmd

uml-add-kconfig-debug-deps.patch
  uml: add kconfig debug deps

uml-real-fix-for-__gcov_init-symbols.patch
  uml: real fix for __gcov_init symbols

uml-fix-cond-expr-as-lvalues-warning.patch
  Subject: [patch 12/12] uml: fix "cond. expr. as lvalues" warning

s390-swapped-memset-arguments.patch
  s390: swapped memset arguments.

s390-kernel-faults.patch
  s390: kernel faults

s390-signal-stack-bug.patch
  s390: signal stack bug

s390-dasd-preferred-path-support.patch
  s390: dasd preferred path support

s390-qeth-layer2-fixes.patch
  s390: qeth layer2 fixes

s390-qeth-1920-device-support.patch
  s390: qeth 1920 device suppor

s390-qeth-blkt-tuning.patch
  s390: qeth blkt tuning

s390-qeth-tcp-segmentation-offload.patch
  s390: qeth tcp segmentation offload

s390-claw-network-device-driver.patch
  s390: claw network device driver

make-sysrq-f-call-oom_kill.patch
  make sysrq-F call oom_kill()

mtrr-size-and-base-debug.patch
  mtrr size-and-base debugging

cant-unmount-bad-inode.patch
  Can't unmount bad inode

iounmap-debugging.patch
  iounmap debugging

detect-soft-lockups.patch
  detect soft lockups

detect-soft-lockups-from-touch_nmi_watchdog.patch
  detect-soft-lockups: call from touch_nmi_watchdog

areca-raid-linux-scsi-driver.patch
  ARECA RAID Linux scsi driver

rt-lsm.patch
  RT-LSM

tty-output-lossage-fix.patch
  tty output lossage fix

cx24110-conexant-frontend-update.patch
  cx24110 Conexant Frontend update

nice-and-rt-prio-rlimits.patch
  nice and rt-prio rlimits

relayfs.patch
  relayfs

relayfs-properly-handle-oversized-events.patch
  relayfs: properly handle oversized events

relayfs-backing_dev-fix.patch
  relayfs-backing_dev-fix

cfq-iosched-update-to-time-sliced-design.patch
  cfq-iosched: update to time sliced design

cfq-iosched-update-to-time-sliced-design-export-task_nice.patch
  cfq-iosched-update-to-time-sliced-design-export-task_nice

cfq-iosched-update-to-time-sliced-design-fix.patch
  cfq-iosched-update-to-time-sliced-design fix

cfq-iosched-update-to-time-sliced-design-fix-fix.patch
  cfq-iosched-update-to-time-sliced-design-fix-fix

cfq-iosched-update-to-time-sliced-design-use-bio_data_dir.patch
  cfq-iosched-update-to-time-sliced-design: use bio_data_dir()

cfq-ioschedc-fix-soft-hang-with-non-fs-requests.patch
  cfq-iosched.c: fix soft hang with non-fs requests

keys-discard-key-spinlock-and-use-rcu-for-key-payload.patch
  keys: Discard key spinlock and use RCU for key payload

keys-discard-key-spinlock-and-use-rcu-for-key-payload-try-4.patch
  keys: Discard key spinlock and use RCU for key payload - try #4

keys-pass-session-keyring-to-call_usermodehelper.patch
  Keys: Pass session keyring to call_usermodehelper()

keys-pass-session-keyring-to-call_usermodehelper-fix.patch
  keys-pass-session-keyring-to-call_usermodehelper fix

keys-use-rcu-to-manage-session-keyring-pointer.patch
  Keys: Use RCU to manage session keyring pointer

keys-make-request-key-create-an-authorisation-key.patch
  Keys: Make request-key create an authorisation key

stallion-driver-module-clean-up.patch
  Stallion driver module clean up

use-__init-and-__exit-in-pktcdvd.patch
  Use __init and __exit in pktcdvd

dvd-ram-support-for-pktcdvd.patch
  DVD-RAM support for pktcdvd

break_lock-fix-2.patch
  break_lock fix

cdrom-cdu31a-cleanups.patch
  cdrom/cdu31a: cleanups

cdrom-cdu31a-locking-fixes.patch
  cdrom/cdu31a: locking fixes

cdrom-cdu31a-use-wait_event.patch
  cdrom/cdu31a: use wait_event

revert-gconfig-changes.patch
  revert recent gconfig changes

revert-gconfig-changes-build-fix.patch
  revert-gconfig-changes build fix

enable-gcc-warnings-for-vsprintf-vsnprintf-with-format-attribute.patch
  Enable gcc warnings for vsprintf/vsnprintf with "format" attribute

w6692-eliminate-bad-section-references.patch
  w6692: eliminate bad section references

teles3-eliminate-bad-section-references.patch
  teles3: eliminate bad section references

elsa-eliminate-bad-section-references.patch
  elsa eliminate bad section references

hfc_sx-eliminate-bad-section-references.patch
  hfc_sx: eliminate bad section references

sedlbauer-eliminate-bad-section-references.patch
  sedlbauer: eliminate bad section references

fix-mprotect-with-len=size_t-1-to-return-enomem.patch
  fix mprotect() with len=(size_t)(-1) to return -ENOMEM

checkstack-fix-sort-misbehavior-for-long-function-names.patch
  checkstack: fix sort misbehavior for long function names

fix-irq_affinity-write-from-proc-for-ia64.patch
  Fix irq_affinity write from /proc for ia64

fix-mmap-return-value-to-conform-posix.patch
  fix mmap() return value to conform POSIX

fix-mmap-return-value-to-conform-to-posix.patch
  fix mmap() return value to conform to POSIX

exports-to-enable-clock-driver-modules.patch
  Exports to enable clock driver modules

per-cpu-irq-stat.patch
  Per cpu irq stat

kill-drivers-cdrom-mcdc.patch
  kill drivers/cdrom/mcd.c

drivers-char-isicomc-gcc4-fix.patch
  drivers/char/isicom.c gcc4 fix

infiniband-remove-unsafe-use-of-in_atomic.patch
  InfiniBand: remove unsafe use of in_atomic()

new-console-flag-con_boot.patch
  New console flag: CON_BOOT

new-console-flag-con_boot-comment.patch
  new-console-flag-con_boot-comment

pipe-save-one-pipe-page.patch
  pipe: save one pipe page

kprobes-incorrect-spin_unlock_irqrestore-call-in-register_kprobe.patch
  kprobes: incorrect spin_unlock_irqrestore() call in register_kprobe()

ext2_make_empty-information-leak.patch
  ext2_make_empty information leak fix

missing-set_fs-calls-around-kernel-syscall.patch
  Missing set_fs() calls around kernel syscall

cpusets-mems-generation-deadlock-fix.patch
  cpusets: mems generation deadlock fix

cpusets-alloc-gfp_wait-sleep-fix.patch
  cpusets: alloc GFP_WAIT sleep fix

mtrr-uaccess-range-checking-fix.patch
  mtrr: uaccess range checking fix

cciss-range-checking-fix.patch
  cciss: range chcking fix

fix-posix-timers-expiring-before-their-scheduled-time.patch
  Fix POSIX timers expiring before their scheduled time

fix-oops-when-inserting-ipmi_si-module.patch
  Fix oops when inserting ipmi_si module

binfmt_elf-bss-padding-fix.patch
  binfmt_elf bss padding fix

posix-cpu-timers-and-cputime_t-divisons.patch
  posix-cpu-timers and cputime_t divisons.

timers-prepare-for-del_timer_sync-changes.patch
  timers: prepare for del_timer_sync() changes

timers-rework-del_timer_sync.patch
  timers: rework del_timer_sync()

timers-serialize-timers.patch
  timers: serialize timers

timers-remove-memory-barriers.patch
  timers: remove memory barriers

timers-cleanup-kill-__get_base.patch
  timers: cleanup, kill __get_base()

timers-enable-irqs-in-__mod_timer.patch
  timers: enable irqs in __mod_timer()

timers-enable-irqs-in-__mod_timer-tidy.patch
  timers-enable-irqs-in-__mod_timer-tidy

ext2-3-file-limits-to-avoid-overflowing-i_blocks.patch
  ext2/3 file limits to avoid overflowing i_blocks

load_elf_library-kfree-fix.patch
  load_elf_library kfree fix

futex-queue_me-get_user-ordering-fix.patch
  Futex: make futex_wait() atomic again

io_remap_pfn_range-add-for-all-arch-es.patch
  io_remap_pfn_range: add for all arch-es

io_remap_pfn_range-add-for-all-arch-es-fix.patch
  io_remap_pfn_range-add-for-all-arch-es-fix

io_remap_pfn_range-convert-sparc-callers.patch
  io_remap_pfn_range: convert sparc callers

io_remap_pfn_range-fix-some-callers-for-xen.patch
  io_remap_pfn_range: fix some callers for XEN

io_remap_pfn_range-convert-last-callers.patch
  io_remap_pfn_range: convert last callers

alpha-build-fixes.patch
  alpha build fixes

fix-pcmcia-resume-with-card-inserted.patch
  Fix PCMCIA resume with card inserted

pcmcia-clean-up-suspend.patch
  pcmcia: clean up suspend

small-warning-fix-for-gcc4.patch
  small warning fix for gcc4

enable-sig_ign-on-blocked-signals.patch
  Enable SIG_IGN on blocked signals

alpha-elimitate-two-warnings-from-gcc4.patch
  alpha: elimitate two warnings from gcc4

fat-set-ms_noatime-to-msdos.patch
  FAT: set MS_NOATIME to msdos

fat-fix-msdos-datetime.patch
  FAT: Fix msdos ->[ac]{date,time}

fix-compile-warning-in-drivers-pnp-resourcec-with-config_pci.patch
  Fix compile warning in drivers/pnp/resource.c with !CONFIG_PCI

nlm-fix-f_count-leak.patch
  nlm: fix f_count leak

module-parameter-fixes.patch
  module parameter fixes

fs-hpfs-fix-hpfs-support-under-64-bit-kernel.patch
  fs/hpfs/*: fix HPFS support under 64-bit kernel

arch-hook-for-notifying-changes-in-pte-protections-bits.patch
  arch hook for notifying changes in PTE protections bits

serial-digi-neo-driver.patch
  serial: Digi Neo driver

netmos-parallel-serial-combo-support.patch
  Netmos parallel/serial/combo support

consolidate-asm-ipch.patch
  consolidate asm/ipc.h

bt819-array-indexing-fix.patch
  bt819 array indexing fix

unified-spinlock-initialization.patch
  unified spinlock initialization

drivers-block-dac960c-fix-a-use-after-free.patch
  drivers/block/DAC960.c: fix a use after free

drivers-telephony-ixj-fix-a-use-after-free.patch
  drivers/telephony/ixj: fix a use after free

fs-attrc-fix-check-after-use.patch
  fs/attr.c: fix check after use

fs-smbfs-requestc-fix-null-dereference.patch
  fs/smbfs/request.c: fix NULL dereference

hfs-free-page-buffers-in-releasepage.patch
  hfs: free page buffers in releasepage

hfs-fix-umask-behaviour.patch
  hfs: fix umask behaviour

hfs-more-bnode-error-checks.patch
  hfs: more bnode error checks

hfs-fix-sign-problem-in-hfs_ext_keycmp.patch
  hfs: fix sign problem in hfs_ext_keycmp

hfs-use-parse-library-for-mount-options.patch
  hfs: use parse library for mount options

hfs-add-nls-support.patch
  hfs: add nls support

hfs-unicode-decompose-support.patch
  hfs: unicode decompose support

inotify-42.patch
  inotify #42

dvb-clarify-firmware-upload-messages.patch
  dvb: clarify firmware upload messages

dvb-dibcom-frontend-fixes.patch
  dvb: dibcom: frontend fixes

dvb-dibusb-misc-fixes.patch
  dvb: dibusb: misc. fixes

dvb-skystar2-remove-duplicate-pci_release_region.patch
  dvb: skystar2: remove duplicate pci_release_region()

dvb-mt352-pinnacle-300i-comments.patch
  dvb: mt352: Pinnacle 300i comments

dvb-support-activy-budget-card.patch
  dvb: support Activy Budget card

dvb-skystar2-update-email-address.patch
  dvb: skystar2: update email address

dvb-ves1x93-invert_pwm-fix.patch
  dvb: ves1x93: invert_pwm fix

dvb-dibusb-readme-update.patch
  dvb: dibusb readme update

dvb-dibusb-support-hauppauge-wintv-nova-t-usb2.patch
  dvb: dibusb: support Hauppauge WinTV NOVA-T USB2

dvb-nxt2002-qam64-256-support.patch
  dvb: nxt2002: QAM64/256 support

dvb-get_dvb_firmware-new-unshield-version.patch
  dvb: get_dvb_firmware: new unshield version

dvb-dib3000-corrected-device-naming.patch
  dvb: dib3000: corrected device naming

dvb-dibusb-debug-changes.patch
  dvb: dibusb: debug changes

dvb-dibusb-increased-the-number-of-urbs-for-usb11-devices.patch
  dvb: dibusb: increased the number of urbs for usb1.1 devices

dvb-ttusb_dec-use-alternative-interface-to-save-bandwidth.patch
  dvb: ttusb_dec: use alternative interface to save bandwidth

dvb-l64781-email-address-fix.patch
  dvb: l64781: email address fix

dvb-skystar2-fix-mac-address-reading.patch
  dvb: skystar2: fix MAC address reading

dvb-support-kworld-adstech-instant-dvb-t-usb20.patch
  dvb: support KWorld/ADSTech Instant DVB-T USB2.0

dvb-cleanups-make-stuff-static.patch
  dvb: cleanups, make stuff static

dvb-refactor-sw-pid-filter-to-drop-redundant-code.patch
  dvb: refactor sw pid filter to drop redundant code

dvb-nxt2002-fix-max-frequency.patch
  dvb: nxt2002: fix max frequency

dvb-ttusb-budget-s-usb_unlink_urb-usb_kill_urb.patch
  dvb: ttusb-budget: s/usb_unlink_urb/usb_kill_urb/

dvb-av7110-fix-oops-when-av7110_ir_init-failed.patch
  dvb: av7110: fix Oops when av7110_ir_init() failed

dvb-saa7146-static-initialization.patch
  dvb: saa7146: static initialization

dvb-av7110-error-handling-during-attach.patch
  dvb: av7110: error handling during attach

dvb-corrected-links-to-firmware-files.patch
  dvb: corrected links to firmware files

dvb-support-pchdtv-hd2000.patch
  dvb: support pcHDTV HD2000

dvb-dibusb-support-nova-t-usb-ir.patch
  dvb: dibusb: support nova-t usb ir

dvb-oren-or51211-or51132_qam-and-or51132_vsb-firmware-download-info.patch
  dvb: OREN or51211, or51132_qam and or51132_vsb firmware download info

dvb-ttusb_dec-ir-support.patch
  dvb: ttusb_dec: IR support

dvb-dibusb-pll-fix.patch
  dvb: dibusb: pll fix

dvb-tda10021-fix-continuity-errors.patch
  dvb: tda10021: fix continuity errors

dvb-saa7146-remove-duplicate-setgpio.patch
  dvb: saa7146: remove duplicate setgpio

dvb-fix-cams-on-typhoon-dvb-s.patch
  dvb: fix CAMs on Typhoon DVB-S

dvb-frontends-kfree-cleanup.patch
  dvb: frontends: kfree() cleanup

dvb-clear-up-confusion-between-ids-and-adapters.patch
  dvb: clear up confusion between ids and adapters

dvb-dibusb-remove-useless-ifdef.patch
  dvb: dibusb: remove useless ifdef

dvb-support-for-technotrend-pci-dvb-t.patch
  dvb: support for Technotrend PCI DVB-T

dvb-dibusb-hanftek-umt-010-fixes.patch
  dvb: dibusb: HanfTek UMT-010 fixes

dvb-vfree-checking-cleanups.patch
  dvb: vfree() checking cleanups

dvb-convert-from-pci_module_init-to-pci_register_driver.patch
  dvb: convert from pci_module_init to pci_register_driver

dvb-dibusb-support-dtt200u-yakumo-typhoon-hama-usb20-device.patch
  dvb: dibusb: support dtt200u (Yakumo/Typhoon/Hama) USB2.0 device

dvb-sparse-warnings-on-one-bit-bitfields.patch
  dvb: sparse warnings on one-bit bitfields

dvb-support-nova-s-rev-22.patch
  dvb: support Nova-S rev 2.2

dvb-ttusb_dec-cleanup.patch
  dvb: ttusb_dec: cleanup

dvb-gcc-295-compile-fixes.patch
  dvb: gcc 2.95 compile fixes

dvb-mt352-cleanups.patch
  dvb: mt352: cleanups

ext3-jbd-race-releasing-in-use-journal_heads.patch
  ext3/jbd race: releasing in-use journal_heads

ext3-writepages-support-for-writeback-mode.patch
  ext3 writepages support for writeback mode

ext3-writeback-nobh-option.patch
  ext3 writeback "nobh" option

ext3-fix-journal_unmap_buffer-race.patch
  ext3: fix journal_unmap_buffer race

ext3-dynamic-allocating-block-reservation-info.patch
  ext3: dynamic allocation of block reservation info

ext3-reservation-info-cleanup-remove-rsv_seqlock.patch
  ext3: reservation info cleanup: remove rsv_seqlock

ext3-reservation-info-cleanup-remove-rsv_seqlock-fix.patch
  ext3-reservation-info-cleanup-remove-rsv_seqlock fix

ext3-move-goal-logical-block-into-block-allocation-info.patch
  ext3: move goal logical block into block allocation info structure

pcmcia-hotplug-event-for-pcmcia-devices.patch
  pcmcia: hotplug event for PCMCIA devices

pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
  pcmcia: hotplug event for PCMCIA socket devices

pcmcia-device-and-driver-matching.patch
  pcmcia: device and driver matching

pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
  pcmcia: check for invalid crc32 hashes in id_tables

pcmcia-match-for-fake-cis.patch
  pcmcia: match for fake CIS

pcmcia-export-cis-in-sysfs.patch
  pcmcia: export CIS in sysfs

pcmcia-cis-overrid-via-sysfs.patch
  pcmcia: CIS overrid via sysfs

pcmcia-match-anonymous-cards.patch
  pcmcia: match "anonymous" cards

pcmcia-allow-function-id-based-match.patch
  pcmcia: allow function-ID based match

pcmcia-file2alias.patch
  pcmcia: file2alias

pcmcia-request-cis-via-firmware-interface.patch
  pcmcia: request CIS via firmware interface

pcmcia-cleanups.patch
  pcmcia: cleanups

pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
  pcmcia: rescan bus always upon echoing into setup_done

pcmcia-id_table-for-serial_cs.patch
  pcmcia: id_table for serial_cs

pcmcia-id_table-for-3c574_cs.patch
  pcmcia: id_table for 3c574_cs

pcmcia-id_table-for-3c589_cs.patch
  pcmcia: id_table for 3c589_cs

pcmcia-id_table-for-aha152x.patch
  pcmcia: id_table for aha152x

pcmcia-id_table-for-airo_cs.patch
  pcmcia: id_table for airo_cs

pcmcia-id_table-for-axnet_cs.patch
  pcmcia: id_table for axnet_cs

pcmcia-id_table-for-fdomain_stub.patch
  pcmcia: id_table for fdomain_stub

pcmcia-id_table-for-fmvj18x_cs.patch
  pcmcia: id_table for fmvj18x_cs

pcmcia-id_table-for-ibmtr_cs.patch
  pcmcia: id_table for ibmtr_cs

pcmcia-id_table-for-netwave_cs.patch
  pcmcia: id_table for netwave_cs

pcmcia-id_table-for-nmclan_cs.patch
  pcmcia: id_table for nmclan_cs

pcmcia-id_table-for-teles_cs.patch
  pcmcia: id_table for teles_cs

pcmcia-id_table-for-ray_cs.patch
  pcmcia: id_table for ray_cs

pcmcia-id_table-for-wavelan_cs.patch
  pcmcia: id_table for wavelan_cs

pcmcia-id_table-for-sym53c500_csc.patch
  pcmcia: id_table for sym53c500_cs.c

pcmcia-id_table-for-qlogic_stubc.patch
  pcmcia: id_table for qlogic_stub.c

pcmcia-id_table-for-smc91c92_csc.patch
  pcmcia: id_table for smc91c92_cs.c

pcmcia-id_table-for-orinoco_cs.patch
  pcmcia: id_table for orinoco_cs

pcmcia-id_table-for-xirc2ps_csc.patch
  pcmcia: id_table for xirc2ps_cs.c

pcmcia-id_table-for-ide_csc.patch
  pcmcia: id_table for ide_cs.c

pcmcia-id_table-for-parport_csc.patch
  pcmcia: id_table for parport_cs.c

pcmcia-id_table-for-pcnet_csc.patch
  pcmcia: id_table for pcnet_cs.c

pcmcia-id_table-for-pcmciamtdc.patch
  pcmcia: id_table for pcmciamtd.c

pcmcia-id_table-for-vxpocketc.patch
  pcmcia: id_table for vxpocket.c

pcmcia-id_table-for-atmel_csc.patch
  pcmcia: id_table for atmel_cs.c

pcmcia-id_table-for-avma1_csc.patch
  pcmcia: id_table for avma1_cs.c

pcmcia-id_table-for-avm_csc.patch
  pcmcia: id_table for avm_cs.c

pcmcia-id_table-for-bluecard_csc.patch
  pcmcia: id_table for bluecard_cs.c

pcmcia-id_table-for-bt3c_csc.patch
  pcmcia: id_table for bt3c_cs.c

pcmcia-id_table-for-btuart_csc.patch
  pcmcia: id_table for btuart_cs.c

pcmcia-id_table-for-com20020_csc.patch
  pcmcia: id_table for com20020_cs.c

pcmcia-id_table-for-dtl1_csc.patch
  pcmcia: id_table for dtl1_cs.c

pcmcia-id_table-for-elsa_csc.patch
  pcmcia: id_table for elsa_cs.c

pcmcia-id_table-for-ixj_pcmciac.patch
  pcmcia: id_table for ixj_pcmcia.c

pcmcia-id_table-for-nsp_csc.patch
  pcmcia: id_table for nsp_cs.c

pcmcia-id_table-for-sedlbauer_csc.patch
  pcmcia: id_table for sedlbauer_cs.c

pcmcia-id_table-for-wl3501_csc.patch
  pcmcia: id_table for wl3501_cs.c

pcmcia-id_table-for-pdaudiocfc.patch
  pcmcia: id_table for pdaudiocf.c

pcmcia-id_table-for-synclink_csc.patch
  pcmcia: id_table for synclink_cs.c

pcmcia-add-some-documentation.patch
  pcmcia: add some Documentation

pcmcia-update-resource-database-adjust-routines-to-use-unsigned-long-values.patch
  pcmcia: update resource database adjust routines to use unsigned long values

pcmcia-mark-parent-bridge-windows-as-resources-available-for-pcmcia-devices.patch
  pcmcia: mark parent bridge windows as resources available for PCMCIA devices

pcmcia-add-a-config-option-for-the-pcmica-ioctl.patch
  pcmcia: add a config option for the PCMICA ioctl

pcmcia-move-pcmcia-ioctl-to-a-separate-file.patch
  pcmcia: move PCMCIA ioctl to a separate file

pcmcia-clean-up-cs-ds-callback.patch
  pcmcia: clean up cs ds callback

pcmcia-clean-up-cs-ds-callback-fix.patch
  pcmcia-clean-up-cs-ds-callback-fix

pcmcia-make-pcmcia-status-a-bitfield.patch
  pcmcia: make PCMCIA status a bitfield

pcmcia-merge-struct-pcmcia_bus_socket-into-struct-pcmcia_socket.patch
  pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket

pcmcia-remove-unneeded-includes-in-dsc.patch
  pcmcia: remove unneeded includes in ds.c

pcmcia-rename-some-functions.patch
  pcmcia: rename some functions

pcmcia-move-pcmcia-resource-handling-out-of-csc.patch
  pcmcia: move pcmcia resource handling out of cs.c

pcmcia-csc-cleanup.patch
  pcmcia: cs.c cleanup

pcmcia-dsc-cleanup.patch
  pcmcia: ds.c cleanup

pcmcia-release_class.patch
  pcmcia: release_class

pcmcia-use-request_region-in-i82365.patch
  pcmcia: use request_region in i82365

pcmcia-synclink_cs-irq_info2_info-is-gone.patch
  pcmcia: synclink_cs IRQ_INFO2_INFO is gone

pcmcia-mod_devicetableh-fix-for-different-sizes-in-kernel-and-userspace.patch
  pcmcia: mod_devicetable.h fix for different sizes in kernel- and userspace

pcmcia-select-crc32-in-kconfig-for-pcmcia.patch
  pcmcia: select crc32 in Kconfig for PCMCIA

svcrpc-auth_domain-documentation.patch
  svcrpc: auth_domain documentation

nfsd4-fix-share-conflict-tests.patch
  nfsd4: fix share conflict tests

nfsd4-remove-unneeded-stateowner-arguments.patch
  nfsd4: remove unneeded stateowner arguments

nfsd4-fix-use-after-put-in-cb_recall.patch
  nfsd4: fix use after put() in cb_recall

nfsd4-allow-read-on-open-for-write.patch
  nfsd4: allow read on open for write

nfsd4-factor-out-common-open_truncate-code.patch
  nfsd4: factor out common open_truncate code

nfsd4-fix-failure-to-truncate-on-some-opens.patch
  nfsd4: fix failure to truncate on some opens

nfsd4_remove_unused_acl_function.patch
  nfsd4_remove_unused_acl_function

nfsd4-dont-set-write_owner-in-either-allow-or-deny-bits.patch
  nfsd4: don't set WRITE_OWNER in either allow or deny bits

nfsd4-acl-dont-set-named-attrs.patch
  nfsd4: acl don't set named attrs

nfsd4-acl-error-fix.patch
  nfsd4: acl error fix

nfsd4-rename-release_delegation.patch
  nfsd4: rename release_delegation

nfsd4-remove-trailing-whitespace-from-nfs4procc.patch
  nfsd4: remove trailing whitespace from nfs4proc.c

nfsd4-fix-open-returns-for-other-claim-types.patch
  nfsd4: fix open returns for other claim types

nfsd4-fix-indentation-in-nfsd4_open.patch
  nfsd4: fix indentation in nfsd4_open

nfsacl-solaris-nfsacl-workaround.patch
  nfsacl: Solaris nfsacl workaround

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)
  kgdbL warning fix
  kgdb buffer overflow fix
  kgdbL warning fix
  kgdb: CONFIG_DEBUG_INFO fix
  x86_64 fixes
  correct kgdb.txt Documentation link (against  2.6.1-rc1-mm2)
  kgdb: fix for recent gcc
  kgdb warning fixes
  THREAD_SIZE fixes for kgdb
  Fix stack overflow test for non-8k stacks
  kgdb-ga.patch fix for i386 single-step into sysenter
  fix TRAP_BAD_SYSCALL_EXITS on i386
  add TRAP_BAD_SYSCALL_EXITS config for i386
  kgdb-is-incompatible-with-kprobes
  kgdb-ga-build-fix
  kgdb-ga-fixes
  kgdb: kill off highmem_start_page
  kgdb documentation fix

kgdb-x86-config_debug_info-fix.patch
  kgdb CONFIG_DEBUG_INFO fix

kgdboe-netpoll.patch
  kgdb-over-ethernet via netpoll
  kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
  kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
  kgdb-x86_64-warning-fixes
  kgdb-x86_64-fix
  kgdb-x86_64-serial-fix
  kprobes exception notifier fix

kgdb-x86_64-config_debug_info-fix.patch
  kgdb CONFIG_DEBUG_INFO fix

rock-lindent.patch
  rock: lindent it

rock-manual-tidies.patch
  rock: manual tidies

rock-remove-CHECK_SP.patch
  rock: remove CHECK_SP

rock-remove-CONTINUE_DECLS.patch
  rock: remove CONTINUE_DECLS

rock-remove-CHECK_CE.patch
  rock: remove CHECK_CE

rock-remove-SETUP_ROCK_RIDGE.patch
  rock: remove SETUP_ROCK_RIDGE

rock-remove-MAYBE_CONTINUE.patch
  rock: remove MAYBE_CONTINUE

rock-comment-tidies.patch
  rock: comment tidies

rock-lindent-rock-h.patch
  rock: lindent rock.h

isofs-remove-debug-stuff.patch
  isofs: remove debug stuff

rock-handle-corrupted-directories.patch
  rock.c: handle corrupted directories

rock-rename-union-members.patch
  rock: rename union members

rock-handle-directory-overflows.patch
  rock: handle directory overflows

journal_add_journal_head-debug.patch
  journal_add_journal_head-debug

list_del-debug.patch
  list_del debug check

page-owner-tracking-leak-detector.patch
  Page owner tracking leak detector

make-page_owner-handle-non-contiguous-page-ranges.patch
  make page_owner handle non-contiguous page ranges

add-gfp_mask-to-page-owner.patch
  add gfp_mask to page owner

unplug-can-sleep.patch
  unplug functions can sleep

firestream-warnings.patch
  firestream warnings

periodically-scan-redzone-entries-and-slab-control-structures.patch
  periodically scan redzone entries and slab control structures

slab-leak-detector.patch
  slab leak detector

slab-leak-detector-warning-fixes.patch
  slab leak detector warning fixes

irqpoll.patch
  irqpoll

figure-out-who-is-inserting-bogus-modules.patch
  Figure out who is inserting bogus modules

figure-out-who-is-inserting-bogus-modules-warning-fix.patch
  Warning fix and be extra careful about array in kernel/module.c

releasing-resources-with-children.patch
  Releasing resources with children

perfctr-core.patch
  perfctr: core
  perfctr: remove bogus perfctr_sample_thread() calls

perfctr-i386.patch
  perfctr: i386

perfctr-x86-core-updates.patch
  perfctr x86 core updates

perfctr-x86-driver-updates.patch
  perfctr x86 driver updates

perfctr-x86-driver-cleanup.patch
  perfctr: x86 driver cleanup

perfctr-prescott-fix.patch
  Prescott fix for perfctr

perfctr-x86-update-2.patch
  perfctr x86 update 2

perfctr-x86_64.patch
  perfctr: x86_64

perfctr-x86_64-core-updates.patch
  perfctr x86_64 core updates

perfctr-ppc.patch
  perfctr: PowerPC

perfctr-ppc32-driver-update.patch
  perfctr: ppc32 driver update

perfctr-ppc32-mmcr0-handling-fixes.patch
  perfctr ppc32 MMCR0 handling fixes

perfctr-ppc32-update.patch
  perfctr ppc32 update

perfctr-ppc32-update-2.patch
  perfctr ppc32 update

perfctr-virtualised-counters.patch
  perfctr: virtualised counters

perfctr-remap_page_range-fix.patch

virtual-perfctr-illegal-sleep.patch
  virtual perfctr illegal sleep

make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
  Make PERFCTR_VIRTUAL default in Kconfig match recommendation  in help text

perfctr-ifdef-cleanup.patch
  perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
  perfctr: Kconfig-related updates

perfctr-virtual-updates.patch
  perfctr virtual updates

perfctr-virtual-cleanup.patch
  perfctr: virtual cleanup

perfctr-ppc32-preliminary-interrupt-support.patch
  perfctr ppc32 preliminary interrupt support

perfctr-update-5-6-reduce-stack-usage.patch
  perfctr: reduce stack usage

perfctr-interrupt-support-kconfig-fix.patch
  perfctr interrupt_support Kconfig fix

perfctr-low-level-documentation.patch
  perfctr low-level documentation

perfctr-inheritance-1-3-driver-updates.patch
  perfctr inheritance: driver updates

perfctr-inheritance-2-3-kernel-updates.patch
  perfctr inheritance: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
  perfctr inheritance: documentation updates

perfctr-inheritance-locking-fix.patch
  perfctr inheritance locking fix

perfctr-api-changes-first-step.patch
  perfctr API changes: first step

perfctr-virtual-update.patch
  perfctr virtual update

perfctr-x86-64-ia32-emulation-fix.patch
  perfctr x86-64 ia32 emulation fix

perfctr-sysfs-update-1-4-core.patch
  perfctr sysfs update: core

perfctr-sysfs-update.patch
  Perfctr sysfs update

perfctr-sysfs-update-2-4-x86.patch
  perfctr sysfs update: x86

perfctr-sysfs-update-3-4-x86-64.patch
  perfctr sysfs update: x86-64
  perfctr: syscall numbers in x86-64 ia32-emulation
  perfctr x86_64 native syscall numbers fix

perfctr-sysfs-update-4-4-ppc32.patch
  perfctr sysfs update: ppc32

perfctr-2710-api-update-1-4-common.patch
  perfctr-2.7.10 API update 1/4: common

perfctr-2710-api-update-2-4-i386.patch
  perfctr-2.7.10 API update 2/4: i386

perfctr-2710-api-update-3-4-x86_64.patch
  perfctr-2.7.10 API update 3/4: x86_64

perfctr-2710-api-update-4-4-ppc32.patch
  perfctr-2.7.10 API update 4/4: ppc32

perfctr-api-update-1-9-physical-indexing-x86.patch
  perfctr API update 1/9: physical indexing, x86

perfctr-api-update-2-9-physical-indexing-ppc32.patch
  perfctr API update 2/9: physical indexing, ppc32

perfctr-api-update-3-9-cpu_control_header-x86.patch
  perfctr API update 3/9: cpu_control_header, x86

perfctr-api-update-4-9-cpu_control_header-ppc32.patch
  perfctr API update 4/9: cpu_control_header, ppc32

perfctr-api-update-5-9-cpu_control_header-common.patch
  perfctr API update 5/9: cpu_control_header, common

perfctr-api-update-6-9-cpu_control-access-common.patch
  perfctr API update 6/9: cpu_control access, common

perfctr-api-update-7-9-cpu_control-access-x86.patch
  perfctr API update 7/9: cpu_control access, x86

perfctr-api-update-8-9-cpu_control-access-ppc32.patch
  perfctr API update 8/9: cpu_control access, ppc32

perfctr-api-update-9-9-domain-based-read-write-syscalls.patch
  perfctr API update 9/9: domain-based read/write syscalls

perfctr-ia32-syscalls-on-x86-64-fix.patch
  perfctr ia32 syscalls on x86-64 fix

perfctr-cleanups-1-3-common.patch
  perfctr cleanups: common

perfctr-cleanups-2-3-ppc32.patch
  perfctr cleanups: ppc32

perfctr-cleanups-3-3-x86.patch
  perfctr cleanups: x86

perfctr-x86-fix-and-cleanups.patch
  perfctr: x86 fix and cleanups

perfctr-ppc32-fix-and-cleanups.patch
  perfctr: ppc32 fix and cleanups

perfctr-64-bit-values-in-register-descriptors.patch
  perfctr: 64-bit values in register descriptors

perfctr-64-bit-values-in-register-descriptors-fix.patch
  perfctr-64-bit-values-in-register-descriptors fix

sched2-fix-schedstats-warning.patch
  sched: fix schedstats warning

sched2-cleanup-wake_idle.patch
  sched: cleanup wake_idle

sched2-improve-load-balancing-pinned-tasks.patch
  sched: improve load balancing pinned tasks

sched2-reduce-active-load-balancing.patch
  sched: reduce active load balancing

sched2-fix-smt-scheduling-problems.patch
  sched: fix SMT scheduling problems

sched2-add-debugging.patch
  sched: add debugging

sched2-less-aggressive-idle-balancing.patch
  sched: less aggressive idle balancing

sched2-balance-timers.patch
  sched: balance timers

sched2-tweak-affine-wakeups.patch
  sched: tweak affine wakeups

sched2-no-aggressive-idle-balancing.patch
  sched: no aggressive idle balancing

sched2-balance-on-fork.patch
  sched: balance on fork

sched2-schedstats-update-for-balance-on-fork.patch
  sched: schedstats update for balance on fork

sched2-sched-tuning.patch
  sched: sched tuning

sched2-sched-tuning-fix.patch
  sched2-sched-tuning-fix

sched2-sched-domain-sysctl.patch
  sched: sched domain sysctl

sched-uninline-task_timeslice.patch
  sched: uninline task_timeslice

add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
  Add do_proc_doulonglongvec_minmax to sysctl functions
  add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
  add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2

allow-x86_64-to-reenable-interrupts-on-contention.patch
  Allow x86_64 to reenable interrupts on contention

i386-cpu-hotplug-updated-for-mm.patch
  i386 CPU hotplug updated for -mm
  ppc64: fix hotplug cpu

disable-atykb-warning.patch
  disable atykb "too many keys pressed" warning

export-file_ra_state_init-again.patch
  Export file_ra_state_init() again

cachefs-filesystem.patch
  CacheFS filesystem

numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
  numa-policies-for-file-mappings-mpol_mf_move for cachefs

cachefs-release-search-records-lest-they-return-to-haunt-us.patch
  CacheFS: release search records lest they return to haunt us

fix-64-bit-problems-in-cachefs.patch
  Fix 64-bit problems in cachefs

cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
  cachefs: fixed typos that cause wrong pointer to be kunmapped

cachefs-return-the-right-error-upon-invalid-mount.patch
  CacheFS: return the right error upon invalid mount

fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
  Fix CacheFS barrier handling and other kernel discrepancies

remove-error-from-linux-cachefsh.patch
  Remove #error from linux/cachefs.h

cachefs-warning-fix-2.patch
  cachefs warning fix 2

cachefs-linkage-fix-2.patch
  cachefs linkage fix

cachefs-build-fix.patch
  cachefs build fix

cachefs-documentation.patch
  CacheFS documentation

add-page-becoming-writable-notification.patch
  Add page becoming writable notification

add-page-becoming-writable-notification-fix.patch
  do_wp_page_mk_pte_writable() fix

add-page-becoming-writable-notification-build-fix.patch
  add-page-becoming-writable-notification build fix

provide-a-filesystem-specific-syncable-page-bit.patch
  Provide a filesystem-specific sync'able page bit

provide-a-filesystem-specific-syncable-page-bit-fix.patch
  provide-a-filesystem-specific-syncable-page-bit-fix

provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
  provide-a-filesystem-specific-syncable-page-bit-fix-2

make-afs-use-cachefs.patch
  Make AFS use CacheFS

afs-cachefs-dependency-fix.patch
  afs-cachefs-dependency-fix

split-general-cache-manager-from-cachefs.patch
  Split general cache manager from CacheFS

turn-cachefs-into-a-cache-backend.patch
  Turn CacheFS into a cache backend

rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
  Rework the CacheFS documentation to reflect FS-Cache split

update-afs-client-to-reflect-cachefs-split.patch
  Update AFS client to reflect CacheFS split

fscache-menuconfig-help-fix-documentation-path.patch
  fscache-menuconfig-help-fix-documentation-pathc

x86-rename-apic_mode_exint.patch
  kexec: x86: rename APIC_MODE_EXINT

x86-local-apic-fix.patch
  kexec: x86: local apic fix

x86_64-e820-64bit.patch
  kexec: x86_64: e820 64bit fix

x86-i8259-shutdown.patch
  kexec: x86: i8259 shutdown: disable interrupts

x86_64-i8259-shutdown.patch
  kexec: x86_64: add i8259 shutdown method

x86-apic-virtwire-on-shutdown.patch
  kexec: x86: resture apic virtual wire mode on shutdown

x86_64-apic-virtwire-on-shutdown.patch
  kexec: x86_64: restore apic virtual wire mode on shutdown

vmlinux-fix-physical-addrs.patch
  kexec: vmlinux: fix physical addresses

x86-vmlinux-fix-physical-addrs.patch
  kexec: x86: vmlinux: fix physical addresses

x86_64-vmlinux-fix-physical-addrs.patch
  kexec: x86_64: vmlinux: fix physical addresses

x86-config-kernel-start.patch
  kexec: x86: add CONFIG_PYSICAL_START

kexec-reserve-bootmem-fix-for-booting-nondefault-location-kernel.patch
  kexec: reserve Bootmem fix for booting nondefault location kernel

x86_64-config-kernel-start.patch
  kexec: x86_64: add CONFIG_PHYSICAL_START

kexec-kexec-generic.patch
  kexec: add kexec syscalls

kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
  kexec: use unsigned bitfield

x86-machine_shutdown.patch
  kexec: x86: factor out apic shutdown code

x86-kexec.patch
  kexec: x86 kexec core

x86-crashkernel.patch
  crashdump: x86 crashkernel option

x86-crashkernel-fix.patch
  kexec: fix for broken kexec on panic

x86_64-machine_shutdown.patch
  kexec: x86_64: factor out apic shutdown code

x86_64-kexec.patch
  kexec: x86_64 kexec implementation

x86_64-crashkernel.patch
  crashdump: x86_64: crashkernel option

kexec-ppc-support.patch
  kexec: kexec ppc support

kexec-ppc-fix-noret_type.patch
  kexec: ppc: fix NORET_TYPE

x86-crash_shutdown-nmi-shootdown.patch
  crashdump: x86: add NMI handler to capture other CPUs

x86-crash_shutdown-snapshot-registers.patch
  kexec: x86: snapshot registers during crash shutdown

x86-crash_shutdown-apic-shutdown.patch
  kexec: x86 shutdown APICs during crash_shutdown

crashdump-documentation.patch
  crashdump: documentation

crashdump-memory-preserving-reboot-using-kexec.patch
  crashdump: memory preserving reboot using kexec

crashdump-routines-for-copying-dump-pages.patch
  crashdump: routines for copying dump pages

crashdump-routines-for-copying-dump-pages-fixes.patch
  crashdump-routines-for-copying-dump-pages-fixes

crashdump-elf-format-dump-file-access.patch
  crashdump: elf format dump file access

crashdump-linear-raw-format-dump-file-access.patch
  crashdump: linear raw format dump file access

crashdump-linear-raw-format-dump-file-access-coding-style.patch
  crashdump-linear-raw-format-dump-file-access-coding-style

kdump-export-crash-notes-section-address-through.patch
  Kdump: Export crash notes section address through sysfs

kdump-export-crash-notes-section-address-through-build-fix.patch
  kdump-export-crash-notes-section-address-through build fix

kdump-export-crash-notes-section-address-through-x86_64-fix.patch
  kdump-export-crash-notes-section-address-through x86_64 fix

reiser4-sb_sync_inodes.patch
  reiser4: vfs: add super_operations.sync_inodes()

reiser4-allow-drop_inode-implementation.patch
  reiser4: export vfs inode.c symbols

reiser4-truncate_inode_pages_range.patch
  reiser4: vfs: add truncate_inode_pages_range()

reiser4-export-remove_from_page_cache.patch
  reiser4: export pagecache add/remove functions to modules

reiser4-export-page_cache_readahead.patch
  reiser4: export page_cache_readahead to modules

reiser4-reget-page-mapping.patch
  reiser4: vfs: re-check page->mapping after calling try_to_release_page()

reiser4-rcu-barrier.patch
  reiser4: add rcu_barrier() synchronization point

reiser4-rcu-barrier-license-fix.patch
  reiser4-rcu-barrier-license-fix

reiser4-export-inode_lock.patch
  reiser4: export inode_lock to modules

reiser4-export-inode_lock-unexport-__iget.patch
  reiser4-export-inode_lock-unexport-__iget

reiser4-export-pagevec-funcs.patch
  reiser4: export pagevec functions to modules

reiser4-export-radix_tree_preload.patch
  reiser4: export radix_tree_preload() to modules

reiser4-export-find_get_pages.patch

reiser4-radix_tree_lookup_slot.patch
  reiser4: add radix_tree_lookup_slot()

reiser4-perthread-pages.patch
  reiser4: per-thread page pools

reiser4-perthread_pages_alloc-cleanup.patch
  perthread_pages_alloc cleanup

reiser4-include-reiser4.patch
  reiser4: add to build system

reiser4-doc.patch
  reiser4: documentation

reiser4-only.patch
  reiser4: main fs

fs-reiser4-possible-cleanups.patch
  fs/reiser4/: possible cleanups

reiser4-kconfig-help-cleanup.patch
  reiser4 Kconfig help cleanup

reiser4-cleanup-pg_arch_1.patch
  reiser4 cleanup (PG_arch_1)

reiser4-build-fix.patch
  reiser4 build fix

reiser4-update.patch
  reiser4 update

reiser4-only-memory_backed-fix.patch
  reiser4-only-memory_backed-fix

add-acpi-based-floppy-controller-enumeration.patch
  Add ACPI-based floppy controller enumeration.

possible-dcache-bug-debugging-patch.patch
  Possible dcache BUG: debugging patch

serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
  serial: add support for non-standard XTALs to 16c950 driver

add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
  Add support for Possio GCC AKA PCMCIA Siemens MC45

generic-serial-cli-conversion.patch
  generic-serial cli() conversion

specialix-io8-cli-conversion.patch
  Specialix/IO8 cli() conversion

sx-cli-conversion.patch
  SX cli() conversion

au1x00_uart-deadlock-fix.patch
  au1x00_uart deadlock fix

remove-lock_section-from-x86_64-spin_lock-asm.patch
  remove LOCK_SECTION from x86_64 spin_lock asm

kfree_skb-dump_stack.patch
  kfree_skb-dump_stack

minimal-ide-disk-updates.patch
  Minimal ide-disk updates

vt-dont-call-unblank-at-irq-time.patch
  vt: don't call unblank at irq time

ppc32-move-powermac-backlight-stuff-to-a-workqueue.patch
  ppc32: move powermac backlight stuff to a workqueue

radeonfb-implement-proper-workarounds-for-pll-accesses.patch
  radeonfb: Implement proper workarounds for PLL accesses

radeonfb-ddc-i2c-fix.patch
  radeonfb: DDC i2c fix

fbdev-nvidia-licensing-clarification.patch
  fbdev: mvidia licensing clarification

fbcon-stop-framebuffer-operations-before-hardware-is-properly-initialized.patch
  fbcon: Stop framebuffer operations before hardware is properly initialized

nvidiafb-maximize-blit-buffer-capacity.patch
  nvidiafb: Maximize blit buffer capacity

pm2fb-x-and-vt-switching-crash-fix.patch
  pm2fb: X and VT switching crash fix

nvidiafb-kconfig-help-text-update-for-config-fb_nvidia.patch
  nvidiafb: Kconfig help text update for config FB_NVIDIA

fbdev-cleanups-in-drivers-video-part-2.patch
  fbdev: Cleanups in drivers/video part 2

fbdev-cleanups-in-drivers-video-part-2-fix.patch
  fbdev-cleanups-in-drivers-video-part-2 fix

excessive-atyfb-debug-messages.patch
  Excessive atyfb debug messages

atyfb-add-boot-module-option-to-override-composite-sync.patch
  atyfb: Add boot/module option to override composite sync

fbdev-kconfig-fix-for-macmodes-and-ppc.patch
  fbdev: Kconfig fix for macmodes and PPC

fbdev-convert-drivers-to-pci_register_driver.patch
  fbdev: Convert drivers to pci_register_driver

sisfb-trivial-cleanups.patch
  sisfb: Trivial cleanups

tridentfb-clean-up-printks.patch
  tridentfb: Clean up printk()'s

s1d13xxxfb-add-support-for-epson-s1d13806-fb.patch
  s1d13xxxfb: Add support for Epson S1D13806 FB

nvidiafb-process-boot-options-earlier.patch
  nvidiafb: Process boot options earlier

fbcon-save-var-rotate-field-in-struct-display.patch
  fbcon: Save var rotate field in struct display

fbcon-call-set_par-per-fb_info-once-during-init.patch
  fbcon: Call set_par per fb_info once during init

fbcon-do-not-set-palette-if-console-is-not-visible.patch
  fbcon: Do not set palette if console is not visible

nvidiafb-delete-i2c-bus-on-driver-unload.patch
  nvidiafb: Delete i2c bus on driver unload

neofb-mmio-fixes.patch
  neofb: mmio fixes

neofb-set-hwaccel-flags-properly.patch
  neofb: Set hwaccel flags properly

remove-redundant-null-checks-before-kfree-in-drivers-video.patch
  remove redundant NULL checks before kfree() in drivers/video/

remove-redundant-null-checks-before-kfree-in-drivers-video-fix.patch
  remove-redundant-null-checks-before-kfree-in-drivers-video fix

md-merge-md_enter_safemode-into-md_check_recovery.patch
  md: merge md_enter_safemode into md_check_recovery

md-improve-locking-on-safemode-and-move-superblock-writes.patch
  md: improve locking on 'safemode' and move superblock writes

md-improve-the-interface-to-sync_request.patch
  md: improve the interface to sync_request

md-optimised-resync-using-bitmap-based-intent-logging.patch
  md: optimised resync using Bitmap based intent logging

md-a-couple-of-tidyups-relating-to-the-bitmap-file.patch
  md: a couple of tidyups relating to the bitmap file.

md-call-bitmap_daemon_work-regularly.patch
  md: call bitmap_daemon_work regularly

md-print-correct-pid-for-newly-created-bitmap-writeback-daemon.patch
  md: print correct pid for newly created bitmap-writeback-daemon.

md-minor-code-rearrangement-in-bitmap_init_from_disk.patch
  md: minor code rearrangement in bitmap_init_from_disk

md-make-sure-md-bitmap-is-cleared-on-a-clean-start.patch
  md: make sure md bitmap is cleared on a clean start.

md-printk-fix.patch
  md printk fix

md-improve-debug-printing-of-bitmap-superblock.patch
  md: improve debug-printing of bitmap superblock.

md-check-return-value-of-write_page-rather-than-ignore-it.patch
  md: check return value of write_page, rather than ignore it

md-enable-the-bitmap-write-back-daemon-and-wait-for-it.patch
  md: enable the bitmap write-back daemon and wait for it.

md-dont-skip-bitmap-pages-due-to-lack-of-bit-that-we-just-cleared.patch
  md: don't skip bitmap pages due to lack of bit that we just cleared.

md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
  md-optimised-resync-using-bitmap-based-intent-logging fix

md-raid1-support-for-bitmap-intent-logging.patch
  md: raid1 support for bitmap intent logging

md-fix-bug-when-raid1-attempts-a-partial-reconstruct.patch
  md: fix bug when raid1 attempts a partial reconstruct.

md-raid1-support-for-bitmap-intent-logging-fix.patch
  md: initialise sync_blocks in raid1 resync

md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
  md: optimise reconstruction when re-adding a recently failed drive.

md-fix-deadlock-due-to-md-thread-processing-delayed-requests.patch
  md: fix deadlock due to md thread processing delayed requests.

md-allow-md-intent-bitmap-to-be-stored-near-the-superblock.patch
  md: allow md intent bitmap to be stored near the superblock.

md-allow-md-to-update-multiple-superblocks-in-parallel.patch
  md: allow md to update multiple superblocks in parallel.

detect-atomic-counter-underflows.patch
  detect atomic counter underflows

doc-where-to-find-ldd3.patch
  doc: where to find LDD3

post-halloween-doc.patch
  post halloween doc

fuse-maintainers-kconfig-and-makefile-changes.patch
  FUSE - MAINTAINERS, Kconfig and Makefile changes

fuse-core.patch
  FUSE - core

fuse-device-functions.patch
  FUSE - device functions

fuse-device-functions-comments-and-documentation.patch
  FUSE: comments and documentation

fuse-device-functions-cleanup.patch
  FUSE: trivial cleanups

fuse-read-only-operations.patch
  FUSE - read-only operations

fuse-read-write-operations.patch
  FUSE - read-write operations

fuse-file-operations.patch
  FUSE - file operations

fuse-mount-options.patch
  FUSE - mount options

fuse-mount-options-fix.patch
  fuse: fix busy inodes after unmount

fuse-mount-options-comments-and-documentation.patch
  FUSE: comments and documentation

fuse-mount-options-fix-cleanup.patch
  FUSE: trivial cleanups

fuse-mount-options-fix-fix.patch
  FUSE: fix locking for background list

fuse-extended-attribute-operations.patch
  FUSE - extended attribute operations

fuse-readpages-operation.patch
  FUSE - readpages operation

fuse-nfs-export.patch
  FUSE - NFS export

fuse-direct-i-o.patch
  FUSE - direct I/O

fuse-transfer-readdir-data-through-device.patch
  fuse: transfer readdir data through device

drivers-isdn-divert-isdn_divertc-make-5-functions-static.patch
  drivers/isdn/divert/isdn_divert.c: make 5 functions static

drivers-isdn-capi-make-some-code-static.patch
  drivers/isdn/capi/: make some code static

drivers-scsi-pas16c-make-code-static.patch
  drivers/scsi/pas16.c: make code static

fix-pm_message_t-in-generic-code.patch
  Fix pm_message_t in generic code

fix-u32-vs-pm_message_t-in-usb.patch
  Fix u32 vs. pm_message_t in USB

more-pm_message_t-fixes.patch
  more pm_message_t fixes

fix-u32-vs-pm_message_t-confusion-in-oss.patch
  Fix u32 vs. pm_message_t confusion in OSS

fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch
  Fix u32 vs. pm_message_t confusion in PCMCIA

fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch
  Fix u32 vs. pm_message_t confusion in framebuffers

fix-u32-vs-pm_message_t-confusion-in-mmc.patch
  Fix u32 vs. pm_message_t confusion in MMC

fix-u32-vs-pm_message_t-confusion-in-serials.patch
  Fix u32 vs. pm_message_t confusion in serials

fix-u32-vs-pm_message_t-in-macintosh.patch
  Fix u32 vs. pm_message_t in macintosh

fix-u32-vs-pm_message_t-confusion-in-agp.patch
  Fix u32 vs. pm_message_t confusion in AGP

cyrix-eliminate-bad-section-references.patch
  cyrix: eliminate bad section references

drivers-media-video-tvaudioc-make-some-variables-static.patch
  drivers/media/video/tvaudio.c: make some variables static

drivers-isdn-sc-possible-cleanups.patch
  drivers/isdn/sc/: possible cleanups

drivers-isdn-pcbit-possible-cleanups.patch
  drivers/isdn/pcbit/: possible cleanups

drivers-isdn-i4l-possible-cleanups.patch
  drivers/isdn/i4l/: possible cleanups

unexport-mca_find_device_by_slot.patch
  unexport mca_find_device_by_slot

drivers-isdn-hardware-avm-misc-cleanups.patch
  drivers/isdn/hardware/avm/: misc cleanups

drivers-isdn-act2000-capic-if-0-an-unused-function.patch
  drivers/isdn/act2000/capi.c: #if 0 an unused function

tpm-fix-gcc-printk-warnings.patch
  tpm: fix gcc printk warnings

x86-64-add-memcpy-memset-prototypes.patch
  x86-64: add memcpy/memset prototypes

au1100fb-convert-to-c99-inits.patch
  au1100fb: convert to C99 inits.

reiserfs-use-null-instead-of-0.patch
  reiserfs: use NULL instead of 0

comments-on-locking-of-task-comm.patch
  comments on locking of task->comm

riottyc-cleanups-and-warning-fix.patch
  riotty.c cleanups and warning fix

fixup-a-comment-still-refering-to-verify_area.patch
  fix up a comment still refering to verify_area

char-ds1620-use-msleep-instead-of-schedule_timeout.patch
  char/ds1620: use msleep() instead of schedule_timeout()

char-tty_io-replace-schedule_timeout-with-msleep_interruptible.patch
  char/tty_io: replace schedule_timeout() with msleep_interruptible()

kernel-timer-fix-msleep_interruptible-comment.patch
  kernel/timer: fix msleep_interruptible() comment

ixj-compile-warning-cleanup.patch
  ixj* - compile warning cleanup

spelling-cleanups-in-shrinker-code.patch
  Spelling cleanups in shrinker code

init-do_mounts_initrdc-fix-sparse-warning.patch
  init/do_mounts_initrd.c: fix sparse warning

arch-i386-kernel-trapsc-fix-sparse-warnings.patch
  arch/i386/kernel/traps.c: fix sparse warnings

arch-i386-kernel-apmc-fix-sparse-warnings.patch
  arch/i386/kernel/apm.c: fix sparse warnings

arch-i386-mm-faultc-fix-sparse-warnings.patch
  arch/i386/mm/fault.c: fix sparse warnings

arch-i386-crypto-aesc-fix-sparse-warnings.patch
  arch/i386/crypto/aes.c: fix sparse warnings

codingstyle-trivial-whitespace-fixups.patch
  CodingStyle: trivial whitespace fixups

small-partitions-msdos-cleanups.patch
  small partitions/msdos cleanups

remove-redundant-null-check-before-before-kfree-in.patch
  remove redundant NULL check before before kfree() in  kernel/sysctl.c

update-ross-biro-bouncing-email-address.patch
  update Ross Biro bouncing email address

get-rid-of-redundant-null-checks-before-kfree-in-arch-i386.patch
  get rid of redundant NULL checks before kfree() in arch/i386/

remove-redundant-null-checks-before-kfree-in-sound-and.patch
  remove redundant NULL checks before kfree() in sound/ and avoid casting pointers about to be kfree()'ed

x86-geode-support-fixes.patch
  x86: geode support fixes

drivers-scsi-initioc-cleanups.patch
  drivers/scsi/initio.c: cleanups

dont-do-pointless-null-checks-and-casts-before-kfree.patch
  selinux: kfree cleanup

drivers-char-isicomc-section-fixes.patch
  drivers/char/isicom.c: section fixes

sound-oss-cleanups.patch
  sound/oss/: cleanups

sound-oss-rme96xxc-remove-kernel-22-ifs.patch
  sound/oss/rme96xx.c: remove kernel 2.2 #if's

drivers-char-mwave-tp3780ic-remove-kernel-22-ifs.patch
  drivers/char/mwave/tp3780i.c: remove kernel 2.2 #if's

drivers-net-skfp-cleanups.patch
  drivers/net/skfp/: cleanups

net-atm-resourcesc-remove-__free_atm_dev.patch
  Subject: [2.6 patch] net/atm/resources.c: remove __free_atm_dev

mm-mmapnommuc-several-unexports.patch
  mm/{mmap,nommu}.c: several unexports

unexport-hugetlb_total_pages.patch
  unexport hugetlb_total_pages

unexport-clear_page_dirty_for_io.patch
  unexport clear_page_dirty_for_io

mm-filemapc-make-sync_page_range_nolock-static.patch
  mm/filemap.c: make sync_page_range_nolock static

mm-filemapc-make-generic_file_direct_io-static.patch
  mm/filemap.c: make generic_file_direct_IO static

remove-exports-for-oem-modules.patch
  remove exports for oem modules

mm-page_allocc-unexport-nr_swap_pages.patch
  unexport nr_swap_pages

unexport-console_unblank.patch
  unexport console_unblank

mm-swapc-unexport-vm_acct_memory.patch
  mm/swap.c: unexport vm_acct_memory

mm-swapfilec-unexport-total_swap_pages.patch
  mm/swapfile.c: unexport total_swap_pages

mm-swap_statec-unexport-swapper_space.patch
  mm/swap_state.c: unexport swapper_space

unexport-slab_reclaim_pages.patch
  unexport slab_reclaim_pages

Re: 2.6.12-rc1-mm3

[Brice Goglin]

[-- Attachment #1: Type: text/plain, Size: 425 bytes --]

Andrew Morton a écrit :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> 
> - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.

One thing I noticed:
-mm2 did not power off my laptop (Compaq Evo N600c).
I thought I would see something like "ACPI power off" or
USB deregistration messages. But nothing appeared.

It seems to work with -mm3 now.

.config attached.

Regards,
Brice

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 38296 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-mm3
# Fri Mar 25 10:56:02 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="=LoulousMobile"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda4"

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_AOE_PARTITIONS=16

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=m

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers

[Rafael J. Wysocki]

Hi,

On Friday, 25 of March 2005 09:21, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> 
> - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.

First, rmmod works again (thanks ;-)).

> - Again, we'd like people who have had recent DRM and USB resume problems to
>   test and report, please.

My box is still hanged solid on resume (swsusp) by the drivers:

ohci_hcd
ehci_hcd
yenta_socket

possibly others, too.  To avoid this, I had to revert the following patch from
the Len's tree:

diff -Naru a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
--- a/drivers/acpi/pci_link.c	2005-03-24 04:57:27 -08:00
+++ b/drivers/acpi/pci_link.c	2005-03-24 04:57:27 -08:00
@@ -72,10 +72,12 @@
 	u8			active;			/* Current IRQ */
 	u8			edge_level;		/* All IRQs */
 	u8			active_high_low;	/* All IRQs */
-	u8			initialized;
 	u8			resource_type;
 	u8			possible_count;
 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
+	u8			initialized:1;
+	u8			suspend_resume:1;
+	u8			reserved:6;
 };
 
 struct acpi_pci_link {
@@ -530,6 +532,10 @@
 
 	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
 
+	if (link->irq.suspend_resume) {
+		acpi_pci_link_set(link, link->irq.active);
+		link->irq.suspend_resume = 0;
+	}
 	if (link->irq.initialized)
 		return_VALUE(0);
 
@@ -713,38 +719,24 @@
 	return_VALUE(result);
 }
 
-
-static int
-acpi_pci_link_resume (
-	struct acpi_pci_link	*link)
-{
-	ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
-	
-	if (link->irq.active && link->irq.initialized)
-		return_VALUE(acpi_pci_link_set(link, link->irq.active));
-	else
-		return_VALUE(0);
-}
-
-
 static int
-irqrouter_resume(
-	struct sys_device *dev)
+irqrouter_suspend(
+	struct sys_device *dev,
+	u32	state)
 {
 	struct list_head        *node = NULL;
 	struct acpi_pci_link    *link = NULL;
 
-	ACPI_FUNCTION_TRACE("irqrouter_resume");
+	ACPI_FUNCTION_TRACE("irqrouter_suspend");
 
 	list_for_each(node, &acpi_link.entries) {
-
 		link = list_entry(node, struct acpi_pci_link, node);
 		if (!link) {
 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
 			continue;
 		}
-
-		acpi_pci_link_resume(link);
+		if (link->irq.active && link->irq.initialized)
+			link->irq.suspend_resume = 1;
 	}
 	return_VALUE(0);
 }
@@ -856,7 +848,7 @@
 
 static struct sysdev_class irqrouter_sysdev_class = {
         set_kset_name("irqrouter"),
-        .resume = irqrouter_resume,
+        .suspend = irqrouter_suspend,
 };
 
 
# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
#   2005/03/18 16:30:29-05:00 len.brown@intel.com 
#   [ACPI] S3 Suspend to RAM: interrupt resume fix
#   
#   Delete PCI Interrupt Link Device .resume method --
#   it is the device driver's job to request interrupts,
#   not the Link's job to remember what the devices want.
#   
#   This addresses the issue of attempting to run
#   the ACPI interpreter too early in resume, when
#   interrupts are still disabled.
#   
#   http://bugzilla.kernel.org/show_bug.cgi?id=3469
#   
#   Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
#   Signed-off-by: Len Brown <len.brown@intel.com>
# 
# drivers/acpi/pci_link.c
#   2005/03/02 22:23:50-05:00 len.brown@intel.com +14 -22
#   Delete PCI Interrupt Link .resume method
# 

Greets,
Rafael


-- 
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"

Re: 2.6.12-rc1-mm3

[Borislav Petkov]

Hi Andrew,

mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my cpu is a 
dual core pentium 4 HT, 2.60 GHz) gets me a bit further in the boot process 
but it blocks there too.

[output retyped from screen]:
kernel: [    4.109241] PM: Checking swsusp image.
kernel: [    4.109244] PM: Resume from disk failed.
kernel: [    4.112220] VFS: Mounted root (ext2 filesystem) readonly. 
kernel: [    4.112465] Freeing unused kernel memory: 188k freed 
kernel: [    4.142002] logips2pp: Detected unknown logitech mouse model 1
kernel: [    4.274620] input: PS/2 Logitech Mouse on isa0060/serio1 
<--- [point of previous blocks without boot option 'nmi_watchdog=2']--->
INIT: version 2.86 booting
Mounting a tmpfs over /dev... done.
Creating initial device nodes... done.
Setting parameters of disc: (none).
Activating swap.
kernel: [   10.712648] Adding 976744k swap on /dev/hda2. Priority:-1 extents:1
Checking root file system...
fsck 1.36 (05-Feb-2005)
/: clean, 127290/1831424 files, 898566/3662056 blocks
[EOF]

Regards,
Boris.

Re: 2.6.12-rc1-mm3

[Barry K. Nathan]

On Fri, Mar 25, 2005 at 12:21:54AM -0800, Andrew Morton wrote:
>  More fixlets derived from the Coverity tool (does this thing have a name?)

AFAICT the name of the tool is "Coverity Prevent". (But I'm not
absolutely 100% sure.)

-Barry K. Nathan <barryn@pobox.com>

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Steven Cole]

I'm having trouble reading from the cd-rom with 2.6.12-rc1-mm3.

Kernel 2.6.12-rc1 behaves normally:

[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   96M  193M  34% /
/dev/hda9 reiserfs    8.3G  7.2G  1.1G  88% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
/dev/hda7     ext3    1.9G   96M  1.7G   6% /var
/dev/hdc   iso9660     38M   38M     0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 37859
-rw-r--r--  1 501 501 38673949 Mar 25 07:41 linux-2429tar.gz
-rw-r--r--  1 501 501    92317 Mar 25 07:43 patch-2430-rc1.bz2
[root@spc1 steven]# uname -r
2.6.12-rc1-GX110

Snipped from dmesg:

[   51.440018] EXT3-fs: mounted filesystem with ordered data mode.
[   58.585093] PCI: Found IRQ 5 for device 0000:01:0c.0
[  232.333180] ISO 9660 Extensions: IEEE_P1282



Kernel 2.6.12-rc1-mm3 does not: (same CD left in device)

[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   96M  193M  34% /
/dev/hda9 reiserfs    8.3G  7.2G  1.1G  88% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
/dev/hda7     ext3    1.9G   96M  1.7G   6% /var
/dev/hdc   iso9660     38M   38M     0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 0
[root@spc1 steven]# uname -r
2.6.12-rc1-mm3-GX110

Snipped from dmesg:

[   49.198779] EXT3-fs: mounted filesystem with ordered data mode.
[   56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
[  222.804956] rock: directory entry would overflow storage
[  222.804978] rock: sig=0x5245, size=8, remaining=0
[  235.551953] rock: directory entry would overflow storage
[  235.551969] rock: sig=0x5850, size=36, remaining=34
[  235.551976] rock: directory entry would overflow storage
[  235.551981] rock: sig=0x5850, size=36, remaining=34

Sorry, I don't have the time to do further troubleshooting, but I
hope this is enough information.  The .config for this machine was
posted earlier in another thread here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2

Steven

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Steven Cole]

Steven Cole wrote:
> I'm having trouble reading from the cd-rom with 2.6.12-rc1-mm3.
> 
> Kernel 2.6.12-rc1 behaves normally:
> 
> [root@spc1 steven]# mount /dev/hdc /mnt/cdrom
> mount: block device /dev/hdc is write-protected, mounting read-only
> [root@spc1 steven]# df -T
> Filesystem    Type    Size  Used Avail Use% Mounted on
> /dev/hda1     ext3    304M   96M  193M  34% /
> /dev/hda9 reiserfs    8.3G  7.2G  1.1G  88% /home
> /dev/hda8     ext3    464M  8.1M  432M   2% /tmp
> /dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
> /dev/hda7     ext3    1.9G   96M  1.7G   6% /var
> /dev/hdc   iso9660     38M   38M     0 100% /mnt/cdrom
> [root@spc1 steven]# ls -l /mnt/cdrom
> total 37859
> -rw-r--r--  1 501 501 38673949 Mar 25 07:41 linux-2429tar.gz
> -rw-r--r--  1 501 501    92317 Mar 25 07:43 patch-2430-rc1.bz2
> [root@spc1 steven]# uname -r
> 2.6.12-rc1-GX110
> 
> Snipped from dmesg:
> 
> [   51.440018] EXT3-fs: mounted filesystem with ordered data mode.
> [   58.585093] PCI: Found IRQ 5 for device 0000:01:0c.0
> [  232.333180] ISO 9660 Extensions: IEEE_P1282
> 
> 
> 
> Kernel 2.6.12-rc1-mm3 does not: (same CD left in device)
> 
> [root@spc1 steven]# mount /dev/hdc /mnt/cdrom
> mount: block device /dev/hdc is write-protected, mounting read-only
> [root@spc1 steven]# df -T
> Filesystem    Type    Size  Used Avail Use% Mounted on
> /dev/hda1     ext3    304M   96M  193M  34% /
> /dev/hda9 reiserfs    8.3G  7.2G  1.1G  88% /home
> /dev/hda8     ext3    464M  8.1M  432M   2% /tmp
> /dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
> /dev/hda7     ext3    1.9G   96M  1.7G   6% /var
> /dev/hdc   iso9660     38M   38M     0 100% /mnt/cdrom
> [root@spc1 steven]# ls -l /mnt/cdrom
> total 0
> [root@spc1 steven]# uname -r
> 2.6.12-rc1-mm3-GX110
> 
> Snipped from dmesg:
> 
> [   49.198779] EXT3-fs: mounted filesystem with ordered data mode.
> [   56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
> [  222.804956] rock: directory entry would overflow storage
> [  222.804978] rock: sig=0x5245, size=8, remaining=0
> [  235.551953] rock: directory entry would overflow storage
> [  235.551969] rock: sig=0x5850, size=36, remaining=34
> [  235.551976] rock: directory entry would overflow storage
> [  235.551981] rock: sig=0x5850, size=36, remaining=34
> 
> Sorry, I don't have the time to do further troubleshooting, but I
> hope this is enough information.  The .config for this machine was
> posted earlier in another thread here:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2
> 
> Steven

I found a few more minutes to test two more kernels.  The problem
first occured with 2.6.12-rc1-mm2:

2.6.12-rc1     reads the cd-rom OK as reported earlier
2.6.12-rc1-mm1 also reads the cd-rom OK
2.6.12-rc1-mm2 broken same as -mm3 described as above
2.6.12-rc1-mm3 broken as reported earlier

Steven

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Andrew Morton]

Steven Cole <elenstev@mesatop.com> wrote:
>
> > 
>  > [   49.198779] EXT3-fs: mounted filesystem with ordered data mode.
>  > [   56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
>  > [  222.804956] rock: directory entry would overflow storage
>  > [  222.804978] rock: sig=0x5245, size=8, remaining=0
>  > [  235.551953] rock: directory entry would overflow storage
>  > [  235.551969] rock: sig=0x5850, size=36, remaining=34
>  > [  235.551976] rock: directory entry would overflow storage
>  > [  235.551981] rock: sig=0x5850, size=36, remaining=34
>  > 
>  > Sorry, I don't have the time to do further troubleshooting, but I
>  > hope this is enough information.  The .config for this machine was
>  > posted earlier in another thread here:
>  > http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2
>  > 
>  > Steven
> 
>  I found a few more minutes to test two more kernels.  The problem
>  first occured with 2.6.12-rc1-mm2:
> 
>  2.6.12-rc1     reads the cd-rom OK as reported earlier
>  2.6.12-rc1-mm1 also reads the cd-rom OK
>  2.6.12-rc1-mm2 broken same as -mm3 described as above
>  2.6.12-rc1-mm3 broken as reported earlier

Are you really really sure about that?  -mm3 included both the bk-ide-dev
tree and the isofs changes.  2.6.12-rc1-mm2 had neither.

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Steven Cole]

Andrew Morton wrote:
> Steven Cole <elenstev@mesatop.com> wrote:
> 
>> > [   49.198779] EXT3-fs: mounted filesystem with ordered data mode.
>> > [   56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
>> > [  222.804956] rock: directory entry would overflow storage
>> > [  222.804978] rock: sig=0x5245, size=8, remaining=0
>> > [  235.551953] rock: directory entry would overflow storage
>> > [  235.551969] rock: sig=0x5850, size=36, remaining=34
>> > [  235.551976] rock: directory entry would overflow storage
>> > [  235.551981] rock: sig=0x5850, size=36, remaining=34
>> > 
>> > Sorry, I don't have the time to do further troubleshooting, but I
>> > hope this is enough information.  The .config for this machine was
>> > posted earlier in another thread here:
>> > http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2
>> > 
>> > Steven
>>
>> I found a few more minutes to test two more kernels.  The problem
>> first occured with 2.6.12-rc1-mm2:
>>
>> 2.6.12-rc1     reads the cd-rom OK as reported earlier
>> 2.6.12-rc1-mm1 also reads the cd-rom OK
>> 2.6.12-rc1-mm2 broken same as -mm3 described as above
>> 2.6.12-rc1-mm3 broken as reported earlier
> 
> 
> Are you really really sure about that?  -mm3 included both the bk-ide-dev
> tree and the isofs changes.  2.6.12-rc1-mm2 had neither.
> 

Just to be really really sure, I repeated the tests.  I even checked
that the image/label combination in /etc/lilo.conf was what I intended,
but the uname -r should show what's what.

Same results, -mm2 broken, and -mm1 reads the disk.  I even tried
other CD's just to make sure I didn't have something weird.  Same results.

[root@spc1 steven]# uname -r
2.6.12-rc1-mm2-GX110
[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   96M  193M  34% /
/dev/hda9 reiserfs    8.3G  7.5G  818M  91% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
/dev/hda7     ext3    1.9G   96M  1.7G   6% /var
/dev/hdc   iso9660    2.9M  2.9M     0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 0
[root@spc1 steven]# dmesg | tail
[   51.205871] EXT3 FS on hda6, internal journal
[   51.205880] EXT3-fs: mounted filesystem with ordered data mode.
[   51.234132] kjournald starting.  Commit interval 5 seconds
[   51.234544] EXT3 FS on hda7, internal journal
[   51.234553] EXT3-fs: mounted filesystem with ordered data mode.
[   58.357329] PCI: Found IRQ 5 for device 0000:01:0c.0
[  146.301026] rock: directory entry would overflow storage
[  146.301044] rock: sig=0x5245, size=8, remaining=0
[  158.388397] rock: directory entry would overflow storage
[  158.388415] rock: sig=0x5850, size=36, remaining=34
[root@spc1 steven]#

Machine rebooted here.

[root@spc1 steven]# uname -r
2.6.12-rc1-mm1-GX110
[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   96M  193M  34% /
/dev/hda9 reiserfs    8.3G  7.5G  818M  91% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
/dev/hda7     ext3    1.9G   96M  1.7G   6% /var
/dev/hdc   iso9660    2.9M  2.9M     0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 2578
-rw-rw-rw-  1 501 501 2639360 Aug  7  2003 snmp-opc server 30.msi
[root@spc1 steven]# dmesg | tail
[   50.267382] EXT3 FS on hda8, internal journal
[   50.267395] EXT3-fs: mounted filesystem with ordered data mode.
[   50.301423] kjournald starting.  Commit interval 5 seconds
[   50.301763] EXT3 FS on hda6, internal journal
[   50.301774] EXT3-fs: mounted filesystem with ordered data mode.
[   50.330087] kjournald starting.  Commit interval 5 seconds
[   50.330503] EXT3 FS on hda7, internal journal
[   50.330516] EXT3-fs: mounted filesystem with ordered data mode.
[   57.453061] PCI: Found IRQ 5 for device 0000:01:0c.0
[  187.450836] ISO 9660 Extensions: IEEE_P1282
[root@spc1 steven]#

Steven

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Andrew Morton]

Steven Cole <elenstev@mesatop.com> wrote:
>
> >>
> >> I found a few more minutes to test two more kernels.  The problem
> >> first occured with 2.6.12-rc1-mm2:
> >>
> >> 2.6.12-rc1     reads the cd-rom OK as reported earlier
> >> 2.6.12-rc1-mm1 also reads the cd-rom OK
> >> 2.6.12-rc1-mm2 broken same as -mm3 described as above
> >> 2.6.12-rc1-mm3 broken as reported earlier
> > 
> > 
> > Are you really really sure about that?  -mm3 included both the bk-ide-dev
> > tree and the isofs changes.  2.6.12-rc1-mm2 had neither.
> > 
> 
> Just to be really really sure, I repeated the tests.  I even checked
> that the image/label combination in /etc/lilo.conf was what I intended,
> but the uname -r should show what's what.
> 
> Same results, -mm2 broken, and -mm1 reads the disk.  I even tried
> other CD's just to make sure I didn't have something weird.  Same results.

OK, thanks.

It would be interesting to copy a CD to hard disk (under -mm1) and see if
it works OK with the loopback driver.

Also, boot into -mm2 and do a `cmp' of the cdrom with the image which is on
hard-disk.

This should help us work out whether it's isofs, the driver, the VFS or
whatever.

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Jason Munro]

[-- Attachment #1: Type: text/plain, Size: 2321 bytes --]

On 3:22:52 pm 03/25/05 Steven Cole <elenstev@mesatop.com> wrote:
> Same results, -mm2 broken, and -mm1 reads the disk.  I even tried
> other CD's just to make sure I didn't have something weird.  Same
> results.

> [root@spc1 steven]# dmesg | tail
> [   51.205871] EXT3 FS on hda6, internal journal
> [   51.205880] EXT3-fs: mounted filesystem with ordered data mode.
> [   51.234132] kjournald starting.  Commit interval 5 seconds
> [   51.234544] EXT3 FS on hda7, internal journal
> [   51.234553] EXT3-fs: mounted filesystem with ordered data mode.
> [   58.357329] PCI: Found IRQ 5 for device 0000:01:0c.0
> [  146.301026] rock: directory entry would overflow storage
> [  146.301044] rock: sig=0x5245, size=8, remaining=0
> [  158.388397] rock: directory entry would overflow storage
> [  158.388415] rock: sig=0x5850, size=36, remaining=34
> [root@spc1 steven]#


Same results with mm3 here, though mm2 will not boot on my machine so I'm
not sure about that. 2.6.12-rc1 works fine, rc1-mm3 successfully mounts the
cdrom device but shows no contents. Releveant dmsesg output:

rock: directory entry would overflow storage
rock: sig=0x4543, size=28, remaining=0
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27

The machine is a Toshiba P35-S609 laptop the cdrom device is:
MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive

Kernel config is attached.


\__  Jason Munro
 \__ jason@stdbev.com
  \__ http://hastymail.sourceforge.net/

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 38318 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-mm3
# Fri Mar 25 12:32:46 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_AOE_PARTITIONS=16

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=m
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_WBSD=y

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="ISO 8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Andrew Morton]

(Please dont' edit the cc line.  Just do reply-to-all)

"Jason Munro" <jason@stdbev.com> wrote:
>
> > [  146.301026] rock: directory entry would overflow storage
> > [  146.301044] rock: sig=0x5245, size=8, remaining=0
> > [  158.388397] rock: directory entry would overflow storage
> > [  158.388415] rock: sig=0x5850, size=36, remaining=34
> > [root@spc1 steven]#
> 
> 
> Same results with mm3 here, though mm2 will not boot on my machine so I'm
> not sure about that. 2.6.12-rc1 works fine, rc1-mm3 successfully mounts the
> cdrom device but shows no contents. Releveant dmsesg output:
> 
> rock: directory entry would overflow storage
> rock: sig=0x4543, size=28, remaining=0
> rock: directory entry would overflow storage

Seems that I am unable to read.  It's the new rock-ridge bounds checking.

It worked for me.  Is someone able to get an image of a failing filesystem
into my hands?

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Andrew Morton]

Andrew Morton <akpm@osdl.org> wrote:
>
> It's the new rock-ridge bounds checking.

Try this, please?

diff -puN fs/isofs/rock.c~rock-handle-directory-overflows-fix fs/isofs/rock.c
--- 25/fs/isofs/rock.c~rock-handle-directory-overflows-fix	Fri Mar 25 14:21:32 2005
+++ 25-akpm/fs/isofs/rock.c	Fri Mar 25 14:22:01 2005
@@ -218,12 +218,12 @@ repeat:
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
+		if (rock_check_overflow(&rs, sig))
+			goto eio;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
 		if (rs.len < 0)
 			goto eio;	/* corrupted isofs */
-		if (rock_check_overflow(&rs, sig))
-			goto eio;
 
 		switch (sig) {
 		case SIG('R', 'R'):
@@ -316,12 +316,12 @@ repeat:
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
+		if (rock_check_overflow(&rs, sig))
+			goto eio;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
 		if (rs.len < 0)
 			goto eio;	/* corrupted isofs */
-		if (rock_check_overflow(&rs, sig))
-			goto eio;
 
 		switch (sig) {
 #ifndef CONFIG_ZISOFS		/* No flag for SF or ZF */
@@ -694,12 +694,12 @@ repeat:
 		if (rr->len < 3)
 			goto out;	/* Something got screwed up here */
 		sig = isonum_721(rs.chr);
+		if (rock_check_overflow(&rs, sig))
+			goto out;
 		rs.chr += rr->len;
 		rs.len -= rr->len;
 		if (rs.len < 0)
 			goto out;	/* corrupted isofs */
-		if (rock_check_overflow(&rs, sig))
-			goto out;
 
 		switch (sig) {
 		case SIG('R', 'R'):
_

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Chris Wright]

* Andrew Morton (akpm@osdl.org) wrote:
> 
> (Please dont' edit the cc line.  Just do reply-to-all)
> 
> "Jason Munro" <jason@stdbev.com> wrote:
> >
> > > [  146.301026] rock: directory entry would overflow storage
> > > [  146.301044] rock: sig=0x5245, size=8, remaining=0
> > > [  158.388397] rock: directory entry would overflow storage
> > > [  158.388415] rock: sig=0x5850, size=36, remaining=34
> > > [root@spc1 steven]#
> > 
> > 
> > Same results with mm3 here, though mm2 will not boot on my machine so I'm
> > not sure about that. 2.6.12-rc1 works fine, rc1-mm3 successfully mounts the
> > cdrom device but shows no contents. Releveant dmsesg output:
> > 
> > rock: directory entry would overflow storage
> > rock: sig=0x4543, size=28, remaining=0
> > rock: directory entry would overflow storage
> 
> Seems that I am unable to read.  It's the new rock-ridge bounds checking.
> 
> It worked for me.  Is someone able to get an image of a failing filesystem
> into my hands?

I'm interested as well.  It should only be the last in the series.
Does reverting it allow the CD to work?  (I'm trying to make sure the
other overflow check in the series isn't breaking things, I doubt is,
but...).

ftp.kernel.org:/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/broken-out/rock-handle-directory-overflows.patch

thanks,
-chris

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Jason Munro]

On 4:06:54 pm 03/25/05 Andrew Morton <akpm@osdl.org> wrote:
>
> (Please dont' edit the cc line.  Just do reply-to-all)

Oops, reply-to-all it is.

> "Jason Munro" <jason@stdbev.com> wrote:
> >
> > >  [  146.301026] rock: directory entry would overflow storage
> > >  [  146.301044] rock: sig=0x5245, size=8, remaining=0
> > >  [  158.388397] rock: directory entry would overflow storage
> > >  [  158.388415] rock: sig=0x5850, size=36, remaining=34
> > >  [root@spc1 steven]#
> >
> >
> >  Same results with mm3 here, though mm2 will not boot on my machine
> >  so I'm not sure about that. 2.6.12-rc1 works fine, rc1-mm3
> >  successfully mounts the cdrom device but shows no contents.
> >  Releveant dmsesg output:
> >  rock: directory entry would overflow storage
> >  rock: sig=0x4543, size=28, remaining=0
> >  rock: directory entry would overflow storage
>
> Seems that I am unable to read.  It's the new rock-ridge bounds
> checking.
>
> It worked for me.  Is someone able to get an image of a failing
> filesystem into my hands?

I can reproduce it with the following:

mkdir temp
touch temp/file1 temp/file2 temp/file3
mkisofs -R -l temp > test.iso
mount -o loop /mnt/loop


\__  Jason Munro
 \__ jason@stdbev.com
  \__ http://hastymail.sourceforge.net/

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Jason Munro]

On 4:27:49 pm 03/25/05 "Jason Munro" <jason@stdbev.com> wrote:
> On 4:06:54 pm 03/25/05 Andrew Morton <akpm@osdl.org> wrote:
> >
> >  (Please dont' edit the cc line.  Just do reply-to-all)
>
> Oops, reply-to-all it is.
>
> >  "Jason Munro" <jason@stdbev.com> wrote:
> > >
> > > >   [  146.301026] rock: directory entry would overflow storage
> > > >   [  146.301044] rock: sig=0x5245, size=8, remaining=0
> > > >   [  158.388397] rock: directory entry would overflow storage
> > > >   [  158.388415] rock: sig=0x5850, size=36, remaining=34
> > > >   [root@spc1 steven]#
> > >
> > >
> > >   Same results with mm3 here, though mm2 will not boot on my
> > >   machine so I'm not sure about that. 2.6.12-rc1 works fine,
> > >   rc1-mm3 successfully mounts the cdrom device but shows no
> > >   contents. Releveant dmsesg output:
> > >   rock: directory entry would overflow storage
> > >   rock: sig=0x4543, size=28, remaining=0
> > >   rock: directory entry would overflow storage
> >
> >  Seems that I am unable to read.  It's the new rock-ridge bounds
> >  checking.
> >
> >  It worked for me.  Is someone able to get an image of a failing
> >  filesystem into my hands?
>
> I can reproduce it with the following:
>
> mkdir temp
> touch temp/file1 temp/file2 temp/file3
> mkisofs -R -l temp > test.iso
> mount -o loop /mnt/loop

Of course that should be: mount -o loop test.iso /mnt/loop :)

\__  Jason Munro
 \__ jason@stdbev.com
  \__ http://hastymail.sourceforge.net/

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Steven Cole]

Andrew Morton wrote:
> Steven Cole <elenstev@mesatop.com> wrote:
> 
>>>>I found a few more minutes to test two more kernels.  The problem
>>>>first occured with 2.6.12-rc1-mm2:
>>>>
>>>>2.6.12-rc1     reads the cd-rom OK as reported earlier
>>>>2.6.12-rc1-mm1 also reads the cd-rom OK
>>>>2.6.12-rc1-mm2 broken same as -mm3 described as above
>>>>2.6.12-rc1-mm3 broken as reported earlier
>>>
>>>
>>>Are you really really sure about that?  -mm3 included both the bk-ide-dev
>>>tree and the isofs changes.  2.6.12-rc1-mm2 had neither.
>>>
>>
>>Just to be really really sure, I repeated the tests.  I even checked
>>that the image/label combination in /etc/lilo.conf was what I intended,
>>but the uname -r should show what's what.
>>
>>Same results, -mm2 broken, and -mm1 reads the disk.  I even tried
>>other CD's just to make sure I didn't have something weird.  Same results.
> 
> 
> OK, thanks.
> 
> It would be interesting to copy a CD to hard disk (under -mm1) and see if
> it works OK with the loopback driver.
> 
> Also, boot into -mm2 and do a `cmp' of the cdrom with the image which is on
> hard-disk.
> 
> This should help us work out whether it's isofs, the driver, the VFS or
> whatever.
> -

It seems that I've run out of time here today.  If this is still an issue
after the weekend, I'll do the above tests.

Until then, Happy Easter.

Steven

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Steven Cole]

Andrew Morton wrote:
> Andrew Morton <akpm@osdl.org> wrote:
> 
>>It's the new rock-ridge bounds checking.
> 
> 
> Try this, please?

OK, you caught me just as I was headed out the door. ;)

The patch fixed it for me.  Wheee.

[root@spc1 steven]# uname -r
2.6.12-rc1-mm3-GX110
[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem    Type    Size  Used Avail Use% Mounted on
/dev/hda1     ext3    304M   96M  193M  34% /
/dev/hda9 reiserfs    8.3G  7.9G  335M  97% /home
/dev/hda8     ext3    464M  8.1M  432M   2% /tmp
/dev/hda6     ext3    7.4G  1.5G  5.5G  22% /usr
/dev/hda7     ext3    1.9G   97M  1.7G   6% /var
/dev/hdc   iso9660    2.9M  2.9M     0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 2578
-rw-rw-rw-  1 501 501 2639360 Aug  7  2003 snmp-opc server 30.msi
[root@spc1 steven]# dmesg | tail
[   49.932278] EXT3 FS on hda8, internal journal
[   49.932292] EXT3-fs: mounted filesystem with ordered data mode.
[   49.966250] kjournald starting.  Commit interval 5 seconds
[   49.966659] EXT3 FS on hda6, internal journal
[   49.966669] EXT3-fs: mounted filesystem with ordered data mode.
[   49.994929] kjournald starting.  Commit interval 5 seconds
[   49.995334] EXT3 FS on hda7, internal journal
[   49.995345] EXT3-fs: mounted filesystem with ordered data mode.
[   57.117794] PCI: Found IRQ 5 for device 0000:01:0c.0
[  123.944869] ISO 9660 Extensions: IEEE_P1282


Steven

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Jason Munro]

On 4:23:36 pm 03/25/05 Andrew Morton <akpm@osdl.org> wrote:
> Andrew Morton <akpm@osdl.org> wrote:
> >
> >  It's the new rock-ridge bounds checking.
>
> Try this, please?
>
> diff -puN fs/isofs/rock.c~rock-handle-directory-overflows-fix
> fs/isofs/rock.c --- 25/fs/isofs/rock.c~rock-handle-directory-overflows
> -fix    Fri Mar 25 14:21:32 2005
> +++ 25-akpm/fs/isofs/rock.c    Fri Mar 25 14:22:01 2005
> @@ -218,12 +218,12 @@ repeat:
>          if (rr->len < 3)
>              goto out;    /* Something got screwed up here */
>          sig = isonum_721(rs.chr);
> +        if (rock_check_overflow(&rs, sig))
> +            goto eio;
>          rs.chr += rr->len;
>          rs.len -= rr->len;
>          if (rs.len < 0)
>              goto eio;    /* corrupted isofs */
> -        if (rock_check_overflow(&rs, sig))
> -            goto eio;
>
>          switch (sig) {
>          case SIG('R', 'R'):
> @@ -316,12 +316,12 @@ repeat:
>          if (rr->len < 3)
>              goto out;    /* Something got screwed up here */
>          sig = isonum_721(rs.chr);
> +        if (rock_check_overflow(&rs, sig))
> +            goto eio;
>          rs.chr += rr->len;
>          rs.len -= rr->len;
>          if (rs.len < 0)
>              goto eio;    /* corrupted isofs */
> -        if (rock_check_overflow(&rs, sig))
> -            goto eio;
>
>          switch (sig) {
>  #ifndef CONFIG_ZISOFS        /* No flag for SF or ZF */
> @@ -694,12 +694,12 @@ repeat:
>          if (rr->len < 3)
>              goto out;    /* Something got screwed up here */
>          sig = isonum_721(rs.chr);
> +        if (rock_check_overflow(&rs, sig))
> +            goto out;
>          rs.chr += rr->len;
>          rs.len -= rr->len;
>          if (rs.len < 0)
>              goto out;    /* corrupted isofs */
> -        if (rock_check_overflow(&rs, sig))
> -            goto out;
>
>          switch (sig) {
>          case SIG('R', 'R'):
> _

This fixes it here.

\__  Jason Munro
 \__ jason@stdbev.com
  \__ http://hastymail.sourceforge.net/

Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

[Andrew Morton]

"Jason Munro" <jason@stdbev.com> wrote:
> 
> This fixes it here.
> 

Steven Cole <elenstev@mesatop.com> wrote:
>
> The patch fixed it for me.  Wheee.
> 

OK, thanks guys.  You're the best.

Re: 2.6.12-rc1-mm3

[Jason Uhlenkott]

On Fri, Mar 25, 2005 at 12:21:54AM -0800, Andrew Morton wrote:
>  bk-acpi.patch

This doesn't build for SGI sn2:

arch/ia64/kernel/mca.c: In function `ia64_mca_init':
arch/ia64/kernel/mca.c:1394: error: `ACPI_INTERRUPT_CPEI' undeclared (first use in this function)
arch/ia64/kernel/mca.c:1394: error: (Each undeclared identifier is reported only once
arch/ia64/kernel/mca.c:1394: error: for each function it appears in.)
make[1]: *** [arch/ia64/kernel/mca.o] Error 1
make: *** [arch/ia64/kernel] Error 2

This is because we lost CONFIG_ACPI_BOOT -- it now depends on
CONFIG_PM, which we don't have (or want) on sn2.  The following fixes
it, but I'm not sure what the original rationale was.  Len?

Signed-off-by: Jason Uhlenkott <jasonuhl@sgi.com>

Index: linux/drivers/acpi/Kconfig
===================================================================
--- linux.orig/drivers/acpi/Kconfig	2005-03-25 12:22:57.909667494 -0800
+++ linux/drivers/acpi/Kconfig	2005-03-25 16:28:35.793588269 -0800
@@ -3,7 +3,6 @@
 #
 
 menu "ACPI (Advanced Configuration and Power Interface) Support"
-	depends on PM
 	depends on !X86_VISWS
 	depends on !IA64_HP_SIM
 	depends on IA64 || X86

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Len Brown]

On Fri, 2005-03-25 at 20:43, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 12:21:54AM -0800, Andrew Morton wrote:
> >  bk-acpi.patch
> 
> This doesn't build for SGI sn2:
> 
> arch/ia64/kernel/mca.c: In function `ia64_mca_init':
> arch/ia64/kernel/mca.c:1394: error: `ACPI_INTERRUPT_CPEI' undeclared
> (first use in this function)
> arch/ia64/kernel/mca.c:1394: error: (Each undeclared identifier is
> reported only once
> arch/ia64/kernel/mca.c:1394: error: for each function it appears in.)
> make[1]: *** [arch/ia64/kernel/mca.o] Error 1
> make: *** [arch/ia64/kernel] Error 2
> 
> This is because we lost CONFIG_ACPI_BOOT -- it now depends on
> CONFIG_PM, which we don't have (or want) on sn2.  The following fixes
> it, but I'm not sure what the original rationale was.  Len?
> 
> Signed-off-by: Jason Uhlenkott <jasonuhl@sgi.com>
> 

Please send me the .config you'd like to build.
I believe that what we want to do is include CONFIG_PM.
Note also that CONFIG_ACPI_BOOT will be going away --
to be replaced simply by CONFIG_ACPI.

thanks,
-Len

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Jason Uhlenkott]

On Fri, Mar 25, 2005 at 08:56:58PM -0500, Len Brown wrote:
> Please send me the .config you'd like to build.

arch/ia64/configs/sn2_defconfig

> I believe that what we want to do is include CONFIG_PM.

At first glance, it looks like that will enable suspend/resume
functionality (which I don't think we want on SGI sn2) for a bunch of
drivers.

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Len Brown]

On Fri, 2005-03-25 at 21:02, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 08:56:58PM -0500, Len Brown wrote:
> > Please send me the .config you'd like to build.
> 
> arch/ia64/configs/sn2_defconfig


> > I believe that what we want to do is include CONFIG_PM.
> 
> At first glance, it looks like that will enable suspend/resume
> functionality (which I don't think we want on SGI sn2) for a bunch of
> drivers.

What bad things happen if you define CONFIG_PM on SN2?

Re: CONFIG_ACPI_BOOT
I've got a patch that makes it go away -- this looks like
a good reason for me to dust it off...  Looks like
arch/ia64/Kconfig defines ACPI and then pulls in drivers/acpi/Kconfig,
which it should not do - it should look like i386/Kconfig...

-Len

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Jason Uhlenkott]

On Fri, Mar 25, 2005 at 09:24:21PM -0500, Len Brown wrote:
> What bad things happen if you define CONFIG_PM on SN2?

None, other than slightly enlarging the kernel with some
suspend/resume stuff we don't care about.  It's always been
unavailable for SN2 builds:

depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB

but there doesn't appear to be any particular reason for that other
than us not needing it (and in fact SN2 systems can run IA64_GENERIC
kernels with CONFIG_PM enabled without incident).

> Re: CONFIG_ACPI_BOOT
> I've got a patch that makes it go away -- this looks like
> a good reason for me to dust it off...  Looks like
> arch/ia64/Kconfig defines ACPI and then pulls in drivers/acpi/Kconfig,
> which it should not do - it should look like i386/Kconfig...

Sounds good to me.  Does that mean everything currently controlled by
CONFIG_ACPI_BOOT will be controlled by CONFIG_ACPI instead?

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Jesse Barnes]

[-- Attachment #1: Type: text/plain, Size: 1076 bytes --]

On Friday, March 25, 2005 6:57 pm, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 09:24:21PM -0500, Len Brown wrote:
> > What bad things happen if you define CONFIG_PM on SN2?
>
> None, other than slightly enlarging the kernel with some
> suspend/resume stuff we don't care about.  It's always been
> unavailable for SN2 builds:
>
> depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB
>
> but there doesn't appear to be any particular reason for that other
> than us not needing it (and in fact SN2 systems can run IA64_GENERIC
> kernels with CONFIG_PM enabled without incident).
>
> > Re: CONFIG_ACPI_BOOT
> > I've got a patch that makes it go away -- this looks like
> > a good reason for me to dust it off...  Looks like
> > arch/ia64/Kconfig defines ACPI and then pulls in drivers/acpi/Kconfig,
> > which it should not do - it should look like i386/Kconfig...

Yeah, I noticed that too.  If you've got a patch to clean it up, we should go 
ahead and get it sent off to Tony.

I sent this to linux-ia64 the other day to address these issues.

Jesse

[-- Attachment #2: ia64-kconfig-pm-fix.patch --]
[-- Type: text/x-diff, Size: 409 bytes --]

===== arch/ia64/Kconfig 1.85 vs edited =====
--- 1.85/arch/ia64/Kconfig	2005-01-28 15:32:25 -08:00
+++ edited/arch/ia64/Kconfig	2005-03-21 09:38:29 -08:00
@@ -328,7 +328,7 @@
 
 config PM
 	bool "Power Management support"
-	depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB
+	depends on !IA64_HP_SIM
 	default y
 	help
 	  "Power Management" means that parts of your computer are shut

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Len Brown]

On Fri, 2005-03-25 at 21:57, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 09:24:21PM -0500, Len Brown wrote:
> > What bad things happen if you define CONFIG_PM on SN2?
> 
> None, other than slightly enlarging the kernel with some
> suspend/resume stuff we don't care about.  It's always been
> unavailable for SN2 builds:
> 
> depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 ||
> IA64_HP_ZX1_SWIOTLB
> 
> but there doesn't appear to be any particular reason for that other
> than us not needing it (and in fact SN2 systems can run IA64_GENERIC
> kernels with CONFIG_PM enabled without incident).

good.

I realize now I didn't answer your original question.
The reason ACPI now depends on PM is that
it makes it easier for us to do a more orderly shutdown --
acpi registers as a device so it can do some stuff
upon the PM device shutdowns -- before interrupts are disabled.

I think with all the twisty turney passages
related to the suspend states, poweroff, sys-req, and now kexec,
that it is best if we can keep the code paths as
common as possible or some of them will never get the
testing needed to prevent them from getting broken.

Also, it is now common practice to include PM && ACPI together
in the x86 world.  Though technically one could have
ACPI w/o PM and you'd have lost only ACPI_SLEEP, virtually
nobody seems to use/depend-on that combination.

Obviously I hadn't considered SN2 or built its config
before that 1-liner.  I'll be sure to build it next time.

> > Re: CONFIG_ACPI_BOOT
> > I've got a patch that makes it go away -- this looks like
> > a good reason for me to dust it off...  Looks like
> > arch/ia64/Kconfig defines ACPI and then pulls in
> drivers/acpi/Kconfig,
> > which it should not do - it should look like i386/Kconfig...
> 
> Sounds good to me.  Does that mean everything currently controlled by
> CONFIG_ACPI_BOOT will be controlled by CONFIG_ACPI instead?

yes.  this was in -mm a while back, but got pushed onto the back
burner when more pressing things came up.

thanks,
-Len

Re: [ACPI] Re: 2.6.12-rc1-mm3

[Jason Uhlenkott]

On Fri, Mar 25, 2005 at 11:12:39PM -0500, Len Brown wrote:
> I realize now I didn't answer your original question.
> The reason ACPI now depends on PM is that
> it makes it easier for us to do a more orderly shutdown --
> acpi registers as a device so it can do some stuff
> upon the PM device shutdowns -- before interrupts are disabled.
> 
> I think with all the twisty turney passages
> related to the suspend states, poweroff, sys-req, and now kexec,
> that it is best if we can keep the code paths as
> common as possible or some of them will never get the
> testing needed to prevent them from getting broken.
> 
> Also, it is now common practice to include PM && ACPI together
> in the x86 world.  Though technically one could have
> ACPI w/o PM and you'd have lost only ACPI_SLEEP, virtually
> nobody seems to use/depend-on that combination.

OK, that makes sense.  I see now that Jesse has already sent a patch
to allow CONFIG_PM on sn2, so we'll be fine as soon as that gets
merged.

Re: 2.6.12-rc1-mm3, sound card lost id

[Jean Delvare]

> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> (...)
>  bk-alsa.patch

This one made /proc/asound/card0/id change from "Live" to "Unknown" on
one of my systems, preventing alsatcl from properly restoring my mixer
settings.

I guess this wasn't exactly expected?

00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
        Subsystem: Creative Labs CT4832 SBLive! Value
        Flags: bus master, medium devsel, latency 48, IRQ 5
        I/O ports at 8800 [size=32]

Class:     0401
Device:    1102:0002
Subsystem: 1102:8027

Thanks,
-- 
Jean Delvare

PCMCIA Oops (was Re: 2.6.12-rc1-mm3)

[Sean Neakums]

On a PowerBook5.4 I get the below when I insert the PCMCIA card or
boot with it inserted; however, if I boot with no card inserted,
sleep-resume and insert the card it works fine.  Similar with
2.6.12-rc1-mm1; not sure why I didn't notice until now, since I
happily used it for six days or so, PCMCIA and all, although there was
*some* PCMCIA-related issue I failed to note and cannot now recall.


Yenta: CardBus bridge found at 0001:10:13.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0001:10:13.0, mfunc 0x00001002, devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 53
Socket status: 30000010
pcmcia: I/O behind socket: 0x0 - 0x7fffff
pcmcia: Memory behind socket: 0xf3000000 - 0xf3ffffff
pcmcia: Memory behind socket: 0x80000000 - 0xafffffff
cs: memory probe 0x80000000-0xafffffff:Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: machine check, sig: 7 [#1]
NIP: F20CEC90 LR: F20CEC64 SP: EF8F3BE0 REGS: ef8f3b30 TRAP: 0200    Not tainted
MSR: 00149030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c12966a0[805] 'modprobe' THREAD: ef8f2000
Last syscall: 128 
GPR00: 00000060 EF8F3BE0 C12966A0 F103C000 00000000 EF8F9880 00000002 EF8F3C5A 
GPR08: C04B6370 F103D000 00000000 00001000 22002488 1001E284 10017070 00000000 
GPR16: 00000000 00000000 00000000 00000000 00000000 C1225D40 30000000 00000000 
GPR24: EF8F3C5A 00000021 00000002 C12D282C 00000000 00000000 00000002 EF8F3C5A 
NIP [f20cec90] pcmcia_read_cis_mem+0x184/0x1c0 [pcmcia_core]
LR [f20cec64] pcmcia_read_cis_mem+0x158/0x1c0 [pcmcia_core]
Call trace:
 [f20cefa0] read_cis_cache+0x144/0x168 [pcmcia_core]
 [f20cf668] pccard_get_next_tuple+0x7c/0x2a8 [pcmcia_core]
 [f20cf378] pccard_get_first_tuple+0x94/0x144 [pcmcia_core]
 [f20d0fb8] pccard_validate_cis+0x94/0x27c [pcmcia_core]
 [f106e3c8] readable+0x88/0xa8 [rsrc_nonstatic]
 [f106e5a0] cis_readable+0xc8/0xe4 [rsrc_nonstatic]
 [f106e860] do_mem_probe+0x1d0/0x1e8 [rsrc_nonstatic]
 [f106e8b8] validate_mem+0x40/0x68 [rsrc_nonstatic]
 [f106e99c] pcmcia_nonstatic_validate_mem+0xbc/0xc8 [rsrc_nonstatic]
 [f20d134c] pcmcia_validate_mem+0x34/0x38 [pcmcia_core]
 [f20e39b4] pcmcia_card_add+0x28/0xc0 [pcmcia]
 [f20e441c] ds_event+0x8c/0xe4 [pcmcia]
 [f20cda3c] send_event+0x70/0xc8 [pcmcia_core]
 [f20ce52c] pccard_register_pcmcia+0xac/0xcc [pcmcia_core]
 [f20e49b4] pcmcia_bus_add_socket+0xa8/0x104 [pcmcia]


-- 
Dag vijandelijk luchtschip de huismeester is dood

Re: PCMCIA Oops (was Re: 2.6.12-rc1-mm3)

[Dominik Brodowski]

[-- Attachment #1: Type: text/plain, Size: 896 bytes --]

On Sat, Mar 26, 2005 at 07:39:29PM +0000, Sean Neakums wrote:
> On a PowerBook5.4 I get the below when I insert the PCMCIA card or
> boot with it inserted; however, if I boot with no card inserted,
> sleep-resume and insert the card it works fine.  Similar with
> 2.6.12-rc1-mm1; not sure why I didn't notice until now, since I
> happily used it for six days or so, PCMCIA and all, although there was
> *some* PCMCIA-related issue I failed to note and cannot now recall.

If you revert the patch named
pcmcia-mark-parent-bridge-windows-as-resources-available-for-pcmcia-devices.patch
the oops should disappear. However, I had no chance yet to fully debug
what's going on here. So I'd prefer it if you first applied the attached test
patch and sent me (off-list) the dmesg output. Also, it is very strange that
it doesn't trigger if you did a sleep-resume cycle before... Ben, any idea?

	Dominik

[-- Attachment #2: test --]
[-- Type: text/plain, Size: 2985 bytes --]

Index: 2.6.12-rc1/drivers/pcmcia/cistpl.c
===================================================================
--- 2.6.12-rc1.orig/drivers/pcmcia/cistpl.c	2005-03-25 13:49:21.000000000 +0100
+++ 2.6.12-rc1/drivers/pcmcia/cistpl.c	2005-03-25 13:50:26.000000000 +0100
@@ -89,6 +89,7 @@
 set_cis_map(struct pcmcia_socket *s, unsigned int card_offset, unsigned int flags)
 {
     pccard_mem_map *mem = &s->cis_mem;
+    int ret;
     if (!(s->features & SS_CAP_STATIC_MAP) && mem->res == NULL) {
 	mem->res = pcmcia_find_mem_region(0, s->map_size, s->map_size, 0, s);
 	if (mem->res == NULL) {
@@ -99,7 +100,9 @@
     }
     mem->card_start = card_offset;
     mem->flags = flags;
-    s->ops->set_mem_map(s, mem);
+    printk(KERN_DEBUG "set_cis_map: %x %u %lx %lx %p\n", card_offset, flags, mem->res->start, mem->res->end, s->cis_virt);
+    ret = s->ops->set_mem_map(s, mem);
+    printk(KERN_DEBUG "ret is %i\n", ret);
     if (s->features & SS_CAP_STATIC_MAP) {
 	if (s->cis_virt)
 	    iounmap(s->cis_virt);
Index: 2.6.12-rc1/drivers/pcmcia/rsrc_nonstatic.c
===================================================================
--- 2.6.12-rc1.orig/drivers/pcmcia/rsrc_nonstatic.c	2005-03-25 13:49:21.000000000 +0100
+++ 2.6.12-rc1/drivers/pcmcia/rsrc_nonstatic.c	2005-03-25 13:54:10.000000000 +0100
@@ -93,6 +93,8 @@
 {
 	struct resource *res, *parent;
 
+	printk(KERN_DEBUG "claim_region: %lx, %lx\n", base, size);
+
 	parent = type & IORESOURCE_MEM ? &iomem_resource : &ioport_resource;
 	res = make_resource(base, size, type | IORESOURCE_BUSY, name);
 
@@ -106,6 +108,9 @@
 			res = NULL;
 		}
 	}
+
+	printk(KERN_DEBUG "claim_region: result %p\n", res);
+
 	return res;
 }
 
@@ -267,8 +272,12 @@
 {
 	int ret = -1;
 
+	printk(KERN_DEBUG "readable: %lx %x\n", res->start, s->map_size);
+
 	s->cis_mem.res = res;
 	s->cis_virt = ioremap(res->start, s->map_size);
+
+	printk(KERN_DEBUG "readable: remapped to %p\n", s->cis_virt);
 	if (s->cis_virt) {
 		ret = pccard_validate_cis(s, BIND_FN_ALL, info);
 		/* invalidate mapping and CIS cache */
@@ -290,6 +299,7 @@
 	void __iomem *virt;
 
 	virt = ioremap(res->start, s->map_size);
+	printk("checksum: %lx, %x remapped to %p\n", res->start, s->map_size, virt);
 	if (virt) {
 		map.map = 0;
 		map.flags = MAP_ACTIVE;
@@ -324,6 +334,8 @@
 	res1 = claim_region(s, base, size/2, IORESOURCE_MEM, "cs memory probe");
 	res2 = claim_region(s, base + size/2, size/2, IORESOURCE_MEM, "cs memory probe");
 
+	printk(KERN_DEBUG "cis_readable: %lx (%lx) - %p, %lx (%lx) - %p\n", base, (size/2), res1, (base + size/2), (size/2), res2);
+
 	if (res1 && res2) {
 		ret = readable(s, res1, &info1);
 		ret += readable(s, res2, &info2);
@@ -375,6 +387,7 @@
     /* cis_readable wants to map 2x map_size */
     if (step < 2 * s->map_size)
 	step = 2 * s->map_size;
+    printk(KERN_DEBUG "do_mem_probe %lx %lx %lx\n", base, num, step);
     for (i = j = base; i < base+num; i = j + step) {
 	if (!fail) {
 	    for (j = i; j < base+num; j += step) {

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Takashi Iwai]

At Sat, 26 Mar 2005 11:19:45 +0100,
Jean Delvare wrote:
> 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> > (...)
> >  bk-alsa.patch
> 
> This one made /proc/asound/card0/id change from "Live" to "Unknown" on
> one of my systems, preventing alsatcl from properly restoring my mixer
> settings.
> 
> I guess this wasn't exactly expected?

Hmm, perhaps it's a side effect of chip detection patch by James.
But "Unknown" is bad, of course.

How does /proc/asound/cards look?


Takashi

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Jean Delvare]

Hi Takashi,

> > This one made /proc/asound/card0/id change from "Live" to "Unknown"
> > on one of my systems, preventing alsatcl from properly restoring my
> > mixer settings.
> 
> Hmm, perhaps it's a side effect of chip detection patch by James.
> But "Unknown" is bad, of course.
> 
> How does /proc/asound/cards look?

0 [Unknown        ]: EMU10K1 - SB Live [Unknown]
                     SB Live [Unknown] (rev.6, serial:0x80271102) at 0x8800, irq 5

With the bk-alsa patch reverted, it looks like:

0 [Live           ]: EMU10K1 - Sound Blaster Live!
                     Sound Blaster Live! (rev.6, serial:0x80271102) at 0x8800, irq 5

Hope that helps. If you need any additional information, just ask.

Thanks,
-- 
Jean Delvare

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Lee Revell]

On Tue, 2005-03-29 at 19:57 +0200, Jean Delvare wrote:
> Hi Takashi,
> 
> > > This one made /proc/asound/card0/id change from "Live" to "Unknown"
> > > on one of my systems, preventing alsatcl from properly restoring my
> > > mixer settings.
> > 
> > Hmm, perhaps it's a side effect of chip detection patch by James.
> > But "Unknown" is bad, of course.
> > 
> > How does /proc/asound/cards look?
> 
> 0 [Unknown        ]: EMU10K1 - SB Live [Unknown]
>                      SB Live [Unknown] (rev.6, serial:0x80271102) at 0x8800, irq 5
> 
> With the bk-alsa patch reverted, it looks like:
> 
> 0 [Live           ]: EMU10K1 - Sound Blaster Live!
>                      Sound Blaster Live! (rev.6, serial:0x80271102) at 0x8800, irq 5
> 
> Hope that helps. If you need any additional information, just ask.

I think we just have to add this PCI id to the table.  I got the same
result before James added the SBLive! platinum detection.

What is the output of 'lspci -v | grep -1 EMU10k1'?

Lee

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Jean Delvare]

Hi Lee,

> I think we just have to add this PCI id to the table.  I got the same
> result before James added the SBLive! platinum detection.
> 
> What is the output of 'lspci -v | grep -1 EMU10k1'?

00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
        Subsystem: Creative Labs CT4832 SBLive! Value

and the one you didn't ask for:

00:0d.0 Class 0401: 1102:0002 (rev 06)
        Subsystem: 1102:8027

This made me realize that I could still try to hack it myself. The
following patch somehow helped:

--- linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c.orig	2005-03-29 20:38:12.000000000 +0200
+++ linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c	2005-03-29 22:32:23.000000000 +0200
@@ -680,6 +680,10 @@
 	 .driver = "EMU10K1", .name = "E-mu APS [4001]", 
 	 .emu10k1_chip = 1,
 	 .ecard = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
+	 .driver = "EMU10K1", .name = "SB Live Player 1024", 
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1} ,
 	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
 	 .driver = "EMU10K1", .name = "SB Live 5.1", 
 	 .emu10k1_chip = 1,


Now the card will be listed as "S1024" instead of "Unknown" so that's a
change. Looks like the short name is auto-generated? Unfortunately
that's still not "Live" as before so my mixer settings are not back yet.
And I believe that "Live" was a much better name than "S1024" too.

Thanks,
-- 
Jean Delvare

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Lee Revell]

On Tue, 2005-03-29 at 22:46 +0200, Jean Delvare wrote:
> Hi Lee,
> 
> > I think we just have to add this PCI id to the table.  I got the same
> > result before James added the SBLive! platinum detection.
> > 
> > What is the output of 'lspci -v | grep -1 EMU10k1'?
> 
> 00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
>         Subsystem: Creative Labs CT4832 SBLive! Value
> 
> and the one you didn't ask for:
> 
> 00:0d.0 Class 0401: 1102:0002 (rev 06)
>         Subsystem: 1102:8027
> 
> This made me realize that I could still try to hack it myself. The
> following patch somehow helped:
> 
> --- linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c.orig	2005-03-29 20:38:12.000000000 +0200
> +++ linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c	2005-03-29 22:32:23.000000000 +0200
> @@ -680,6 +680,10 @@
>  	 .driver = "EMU10K1", .name = "E-mu APS [4001]", 
>  	 .emu10k1_chip = 1,
>  	 .ecard = 1} ,
> +	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> +	 .driver = "EMU10K1", .name = "SB Live Player 1024", 
> +	 .emu10k1_chip = 1,
> +	 .ac97_chip = 1} ,
>  	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
>  	 .driver = "EMU10K1", .name = "SB Live 5.1", 
>  	 .emu10k1_chip = 1,
> 
> 
> Now the card will be listed as "S1024" instead of "Unknown" so that's a
> change. Looks like the short name is auto-generated? Unfortunately
> that's still not "Live" as before so my mixer settings are not back yet.
> And I believe that "Live" was a much better name than "S1024" too.
> 

Here is the patch (against ALSA CVS) in its preferred format.  You will
probably have to apply it by hand.  If the mixer settings can't be
restored you'll have to do it manually or edit asound.state by hand.

Lee

Index: alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v
retrieving revision 1.49
diff -u -r1.49 emu10k1_main.c
--- alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c	27 Mar 2005 14:00:54 -0000	1.49
+++ alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c	29 Mar 2005 20:51:44 -0000
@@ -693,6 +693,10 @@
 	 .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", 
 	 .emu10k1_chip = 1,
 	 .ac97_chip = 1} ,
+	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
+	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
+	 .emu10k1_chip = 1,
+	 .ac97_chip = 1} ,
 	{.vendor = 0x1102, .device = 0x0002,
 	 .driver = "EMU10K1", .name = "SB Live [Unknown]", 
 	 .emu10k1_chip = 1,

Lee

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Jean Delvare]

Hi Lee,

> Here is the patch (against ALSA CVS) in its preferred format.  You
> will probably have to apply it by hand.  If the mixer settings can't
> be restored you'll have to do it manually or edit asound.state by
> hand.
> 
> Lee
> 
> Index: alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c
> ===================================================================
> RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v
> retrieving revision 1.49
> diff -u -r1.49 emu10k1_main.c
> --- alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c	27 Mar 2005 14:00:54 -0000	1.49
> +++ alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c	29 Mar 2005 20:51:44 -0000
> @@ -693,6 +693,10 @@
>  	 .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", 
>  	 .emu10k1_chip = 1,
>  	 .ac97_chip = 1} ,
> +	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> +	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
> +	 .emu10k1_chip = 1,
> +	 .ac97_chip = 1} ,
>  	{.vendor = 0x1102, .device = 0x0002,
>  	 .driver = "EMU10K1", .name = "SB Live [Unknown]", 
>  	 .emu10k1_chip = 1,

Unsurprisingly, my card is now named CT4832. I had to edit
/etc/asound.state manually to get my mixer settings back (with some
warnings, but I get some sound).

Not sure I quite see the idea of renaming from "Live", which the user
will understand, to (I suppose) the exact chip name on the card, while
the user has certainly no idea what it is. But heh I'm not an ALSA
developer, there must be a good reason.

Thanks,
-- 
Jean Delvare

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Lee Revell]

On Tue, 2005-03-29 at 23:13 +0200, Jean Delvare wrote:
> > +	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> > +	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
> > +	 .emu10k1_chip = 1,
> > +	 .ac97_chip = 1} ,
> Unsurprisingly, my card is now named CT4832. I had to edit
> /etc/asound.state manually to get my mixer settings back (with some
> warnings, but I get some sound).
> 
> Not sure I quite see the idea of renaming from "Live", which the user
> will understand, to (I suppose) the exact chip name on the card, while
> the user has certainly no idea what it is. But heh I'm not an ALSA
> developer, there must be a good reason.

Blame Creative.  They have released so many different cards under the
Live! name that it's become meaningless.  There are now two separate
classes of cards marketed as Live! (or Audigy) that don't even use the
same driver (ca0106 and emu10k1x), the hardware isn't even similar.
Unsurprisingly, the user confusion is massive.

The model number is the simplest unique identifier.  This is also what
the "good" Windows drivers for these devices, http://www.kxproject.com,
use.

Lee

Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

[Takashi Iwai]

At Tue, 29 Mar 2005 23:13:45 +0200,
Jean Delvare wrote:
> 
> Hi Lee,
> 
> > Here is the patch (against ALSA CVS) in its preferred format.  You
> > will probably have to apply it by hand.  If the mixer settings can't
> > be restored you'll have to do it manually or edit asound.state by
> > hand.
> > 
> > Lee
> > 
> > Index: alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c
> > ===================================================================
> > RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v
> > retrieving revision 1.49
> > diff -u -r1.49 emu10k1_main.c
> > --- alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c	27 Mar 2005 14:00:54 -0000	1.49
> > +++ alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c	29 Mar 2005 20:51:44 -0000
> > @@ -693,6 +693,10 @@
> >  	 .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]", 
> >  	 .emu10k1_chip = 1,
> >  	 .ac97_chip = 1} ,
> > +	{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> > +	 .driver = "EMU10K1", .name = "SBLive! Value [CT4832]", 
> > +	 .emu10k1_chip = 1,
> > +	 .ac97_chip = 1} ,
> >  	{.vendor = 0x1102, .device = 0x0002,
> >  	 .driver = "EMU10K1", .name = "SB Live [Unknown]", 
> >  	 .emu10k1_chip = 1,
> 
> Unsurprisingly, my card is now named CT4832. I had to edit
> /etc/asound.state manually to get my mixer settings back (with some
> warnings, but I get some sound).
> 
> Not sure I quite see the idea of renaming from "Live", which the user
> will understand, to (I suppose) the exact chip name on the card, while
> the user has certainly no idea what it is. But heh I'm not an ALSA
> developer, there must be a good reason.

Changing the name to more descriptive one is a good thing, IMO.
But, of course, it's a regression if the system gets (somehow) broken
after the update.

We can add a hack to set id explicitly to be compatible with older
version...


Takashi

Re: 2.6.12-rc1-mm3

[Borislav Petkov]

On Friday 25 March 2005 17:46, Borislav Petkov wrote:
> Hi Andrew,
>
> mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my cpu
> is a dual core pentium 4 HT, 2.60 GHz) gets me a bit further in the boot
> process but it blocks there too.
>
> [output retyped from screen]:
> kernel: [    4.109241] PM: Checking swsusp image.
> kernel: [    4.109244] PM: Resume from disk failed.
> kernel: [    4.112220] VFS: Mounted root (ext2 filesystem) readonly.
> kernel: [    4.112465] Freeing unused kernel memory: 188k freed
> kernel: [    4.142002] logips2pp: Detected unknown logitech mouse model 1
> kernel: [    4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
> <--- [point of previous blocks without boot option 'nmi_watchdog=2']--->
> INIT: version 2.86 booting
> Mounting a tmpfs over /dev... done.
> Creating initial device nodes... done.
> Setting parameters of disc: (none).
> Activating swap.
> kernel: [   10.712648] Adding 976744k swap on /dev/hda2. Priority:-1
> extents:1 Checking root file system...
> fsck 1.36 (05-Feb-2005)
> /: clean, 127290/1831424 files, 898566/3662056 blocks
> [EOF]

Hi Andrew,

i finally got to run kdb within mm3 and I got a bit further but am not sure 
whether I'm debugging in the right direction:

After booting with "kdb=early" I found out that the kernel blocks with the 
partial message:

kmem_cache_create: Early error in slab task_struct
kernel BUG at mm/slab.c:1215
invalid operand: 0000 [#1]
PREEMPT SMP

and here all dies. After singlestepping through the code, I found out that 
start_kernel calls at offset 0x14d fork_init, which calls at offset 0x39 
kmem_cache_create. kmem_cache_create performs some initial checks: 

   1205     /*
   1206      * Sanity checks... these are all serious usage bugs.
   1207      */
   1208     if ((!name) ||
   1209         in_interrupt() ||
   1210         (size < BYTES_PER_WORD) ||
   1211         (size > (1<<MAX_OBJ_ORDER)*PAGE_SIZE) ||
   1212         (dtor && !ctor)) {
   1213             printk(KERN_ERR "%s: Early error in slab %s\n",
   1214                     __FUNCTION__, name);
   1215             BUG();
   1216         }

And after singlestepping a little bit more, I found out that the 
in_interrupt() check returns true and printk is executed. Here's the 
disassembled code:

00000b10 <kmem_cache_create>:
kmem_cache_create():
mm/slab.c:1201
     b10:   55                      push   %ebp
     b11:   89 e5                   mov    %esp,%ebp
     b13:   57                      push   %edi
     b14:   56                      push   %esi
     b15:   53                      push   %ebx
     b16:   83 ec 3c                sub    $0x3c,%esp
mm/slab.c:1208
     b19:   8b 55 08                mov    0x8(%ebp),%edx
     b1c:   85 d2                   test   %edx,%edx
     b1e:   0f 84 01 08 00 00       je     1325 <kmem_cache_create+0x815>
include/asm/thread_info.h:91
     b24:   b8 00 f0 ff ff          mov    $0xfffff000,%eax
     b29:   21 e0                   and    %esp,%eax
include/asm/thread_info.h:89
     b2b:   f7 40 14 00 ff ff 0f    testl  $0xfffff00,0x14(%eax)
     b32:   0f 85 ed 07 00 00       jne    1325 <kmem_cache_create+0x815> <--- 

this jump here executes and line 0x1325 is:

mm/slab.c:1213
    1325:   c7 04 24 40 02 00 00    movl   $0x240,(%esp)
    132c:   8b 45 08                mov    0x8(%ebp),%eax
    132f:   89 44 24 08             mov    %eax,0x8(%esp)
    1333:   b8 0d 00 00 00          mov    $0xd,%eax
    1338:   89 44 24 04             mov    %eax,0x4(%esp)
    133c:   e8 fc ff ff ff          call   133d <kmem_cache_create+0x82d>
mm/slab.c:1215
    1341:   0f 0b                   ud2a
    1343:   bf 04 00 00 00          mov    $0x4,%edi
    1348:   00 e9                   add    %ch,%cl
    134a:   13 f8                   adc    %eax,%edi
    134c:   ff                      (bad)
    134d:   ff c7                   inc    %edi

and BUG() is called.

Any suggestions or corrections will be greatly appreciated.

Regards,
Boris.

Re: 2.6.12-rc1-mm3

[Andrew Morton]

Borislav Petkov <petkov@uni-muenster.de> wrote:
>
> On Friday 25 March 2005 17:46, Borislav Petkov wrote:
>  > Hi Andrew,
>  >
>  > mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my cpu
>  > is a dual core pentium 4 HT, 2.60 GHz) gets me a bit further in the boot
>  > process but it blocks there too.
>  >
>  > [output retyped from screen]:
>  > kernel: [    4.109241] PM: Checking swsusp image.
>  > kernel: [    4.109244] PM: Resume from disk failed.
>  > kernel: [    4.112220] VFS: Mounted root (ext2 filesystem) readonly.
>  > kernel: [    4.112465] Freeing unused kernel memory: 188k freed
>  > kernel: [    4.142002] logips2pp: Detected unknown logitech mouse model 1
>  > kernel: [    4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
>  > <--- [point of previous blocks without boot option 'nmi_watchdog=2']--->
>  > INIT: version 2.86 booting
>  > Mounting a tmpfs over /dev... done.
>  > Creating initial device nodes... done.
>  > Setting parameters of disc: (none).
>  > Activating swap.
>  > kernel: [   10.712648] Adding 976744k swap on /dev/hda2. Priority:-1
>  > extents:1 Checking root file system...
>  > fsck 1.36 (05-Feb-2005)
>  > /: clean, 127290/1831424 files, 898566/3662056 blocks
>  > [EOF]
> 
>  Hi Andrew,
> 
>  i finally got to run kdb within mm3 and I got a bit further but am not sure 
>  whether I'm debugging in the right direction:
> 
>  After booting with "kdb=early" I found out that the kernel blocks with the 
>  partial message:
> 
>  kmem_cache_create: Early error in slab task_struct
>  kernel BUG at mm/slab.c:1215
>  invalid operand: 0000 [#1]
>  PREEMPT SMP

Beats me.  Where did the kdb patch come from?

It sounds like kdb for some reason is leaving the calling task in
in_interrupt() state when it shouldn't.  You could try removing the
in_interrupt() test, but things will probably die later on.

It might be worth disabling preempt, although a bug there won't cause
in_interrupt() to return true.

Did you send me your .config?

Re: 2.6.12-rc1-mm3

[Borislav Petkov]

[-- Attachment #1: Type: text/plain, Size: 2440 bytes --]

On Thursday 31 March 2005 22:11, Andrew Morton wrote:
> Borislav Petkov <petkov@uni-muenster.de> wrote:
> > On Friday 25 March 2005 17:46, Borislav Petkov wrote:
> >  > Hi Andrew,
> >  >
> >  > mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my
> >  > cpu is a dual core pentium 4 HT, 2.60 GHz) gets me a bit further in
> >  > the boot process but it blocks there too.
> >  >
> >  > [output retyped from screen]:
> >  > kernel: [    4.109241] PM: Checking swsusp image.
> >  > kernel: [    4.109244] PM: Resume from disk failed.
> >  > kernel: [    4.112220] VFS: Mounted root (ext2 filesystem) readonly.
> >  > kernel: [    4.112465] Freeing unused kernel memory: 188k freed
> >  > kernel: [    4.142002] logips2pp: Detected unknown logitech mouse
> >  > model 1 kernel: [    4.274620] input: PS/2 Logitech Mouse on
> >  > isa0060/serio1 <--- [point of previous blocks without boot option
> >  > 'nmi_watchdog=2']---> INIT: version 2.86 booting
> >  > Mounting a tmpfs over /dev... done.
> >  > Creating initial device nodes... done.
> >  > Setting parameters of disc: (none).
> >  > Activating swap.
> >  > kernel: [   10.712648] Adding 976744k swap on /dev/hda2. Priority:-1
> >  > extents:1 Checking root file system...
> >  > fsck 1.36 (05-Feb-2005)
> >  > /: clean, 127290/1831424 files, 898566/3662056 blocks
> >  > [EOF]
> >
> >  Hi Andrew,
> >
> >  i finally got to run kdb within mm3 and I got a bit further but am not
> > sure whether I'm debugging in the right direction:
> >
> >  After booting with "kdb=early" I found out that the kernel blocks with
> > the partial message:
> >
> >  kmem_cache_create: Early error in slab task_struct
> >  kernel BUG at mm/slab.c:1215
> >  invalid operand: 0000 [#1]
> >  PREEMPT SMP
>
> Beats me.  Where did the kdb patch come from?
oss.sgi.com
> It sounds like kdb for some reason is leaving the calling task in
> in_interrupt() state when it shouldn't.  You could try removing the
> in_interrupt() test, but things will probably die later on.
No, that doesn't change anything. It stops at the same point even on mm4 which 
is without the kdb patch.

> It might be worth disabling preempt, although a bug there won't cause
> in_interrupt() to return true.
disabling preempt doesn't change that either. I'll run more kdb sessions 
tomorrow to see what's going on.

> Did you send me your .config?
yes, in some of the previous mails but here you go again.

Regards,
Boris.

[-- Attachment #2: config-2.6.12-rc1-mm4 --]
[-- Type: text/plain, Size: 30173 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-mm4
# Thu Mar 31 15:35:30 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y

#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
CONFIG_PERFCTR_INTERRUPT_SUPPORT=y
CONFIG_PERFCTR_CPUS_FORBIDDEN_MASK=y
CONFIG_PHYSICAL_START=0x100000

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_TRAP_BAD_SYSCALL_EXITS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_AOE_PARTITIONS=16

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_KGDBOE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#

#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM90 is not set

#
# Other I2C Chip support
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#

#
# Misc devices
#

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=y
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# Caches
#
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_KGDB=y
# CONFIG_KGDB_9600BAUD is not set
# CONFIG_KGDB_19200BAUD is not set
# CONFIG_KGDB_38400BAUD is not set
# CONFIG_KGDB_57600BAUD is not set
CONFIG_KGDB_115200BAUD=y
CONFIG_KGDB_PORT=0x3f8
CONFIG_KGDB_IRQ=4
# CONFIG_KGDB_MORE is not set
CONFIG_NO_KGDB_CPUS=2
# CONFIG_KGDB_TS is not set
CONFIG_STACK_OVERFLOW_TEST=y
CONFIG_KGDB_CONSOLE=y
CONFIG_KGDB_SYSRQ=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SECLVL=m
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers

[Andrew Morton]

"Rafael J. Wysocki" <rjw@sisk.pl> wrote:
>
> Hi,
> 
> On Friday, 25 of March 2005 09:21, Andrew Morton wrote:
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> > 
> > - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.
> 
> First, rmmod works again (thanks ;-)).
> 
> > - Again, we'd like people who have had recent DRM and USB resume problems to
> >   test and report, please.
> 
> My box is still hanged solid on resume (swsusp) by the drivers:
> 
> ohci_hcd
> ehci_hcd
> yenta_socket
> 
> possibly others, too.  To avoid this, I had to revert the following patch from
> the Len's tree:

Rafael, does this problem still exist in latest -mm?

I think it does...


> diff -Naru a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
> --- a/drivers/acpi/pci_link.c	2005-03-24 04:57:27 -08:00
> +++ b/drivers/acpi/pci_link.c	2005-03-24 04:57:27 -08:00
> @@ -72,10 +72,12 @@
>  	u8			active;			/* Current IRQ */
>  	u8			edge_level;		/* All IRQs */
>  	u8			active_high_low;	/* All IRQs */
> -	u8			initialized;
>  	u8			resource_type;
>  	u8			possible_count;
>  	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE];
> +	u8			initialized:1;
> +	u8			suspend_resume:1;
> +	u8			reserved:6;
>  };
>  
>  struct acpi_pci_link {
> @@ -530,6 +532,10 @@
>  
>  	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
>  
> +	if (link->irq.suspend_resume) {
> +		acpi_pci_link_set(link, link->irq.active);
> +		link->irq.suspend_resume = 0;
> +	}
>  	if (link->irq.initialized)
>  		return_VALUE(0);
>  
> @@ -713,38 +719,24 @@
>  	return_VALUE(result);
>  }
>  
> -
> -static int
> -acpi_pci_link_resume (
> -	struct acpi_pci_link	*link)
> -{
> -	ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
> -	
> -	if (link->irq.active && link->irq.initialized)
> -		return_VALUE(acpi_pci_link_set(link, link->irq.active));
> -	else
> -		return_VALUE(0);
> -}
> -
> -
>  static int
> -irqrouter_resume(
> -	struct sys_device *dev)
> +irqrouter_suspend(
> +	struct sys_device *dev,
> +	u32	state)
>  {
>  	struct list_head        *node = NULL;
>  	struct acpi_pci_link    *link = NULL;
>  
> -	ACPI_FUNCTION_TRACE("irqrouter_resume");
> +	ACPI_FUNCTION_TRACE("irqrouter_suspend");
>  
>  	list_for_each(node, &acpi_link.entries) {
> -
>  		link = list_entry(node, struct acpi_pci_link, node);
>  		if (!link) {
>  			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
>  			continue;
>  		}
> -
> -		acpi_pci_link_resume(link);
> +		if (link->irq.active && link->irq.initialized)
> +			link->irq.suspend_resume = 1;
>  	}
>  	return_VALUE(0);
>  }
> @@ -856,7 +848,7 @@
>  
>  static struct sysdev_class irqrouter_sysdev_class = {
>          set_kset_name("irqrouter"),
> -        .resume = irqrouter_resume,
> +        .suspend = irqrouter_suspend,
>  };
>  
>  
> # This is a BitKeeper generated diff -Nru style patch.
> #
> # ChangeSet
> #   2005/03/18 16:30:29-05:00 len.brown@intel.com 
> #   [ACPI] S3 Suspend to RAM: interrupt resume fix
> #   
> #   Delete PCI Interrupt Link Device .resume method --
> #   it is the device driver's job to request interrupts,
> #   not the Link's job to remember what the devices want.
> #   
> #   This addresses the issue of attempting to run
> #   the ACPI interpreter too early in resume, when
> #   interrupts are still disabled.
> #   
> #   http://bugzilla.kernel.org/show_bug.cgi?id=3469
> #   
> #   Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
> #   Signed-off-by: Len Brown <len.brown@intel.com>
> # 
> # drivers/acpi/pci_link.c
> #   2005/03/02 22:23:50-05:00 len.brown@intel.com +14 -22
> #   Delete PCI Interrupt Link .resume method
> # 
> 
> Greets,
> Rafael
> 
> 
> -- 
> - Would you tell me, please, which way I ought to go from here?
> - That depends a good deal on where you want to get to.
> 		-- Lewis Carroll "Alice's Adventures in Wonderland"

Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers

[Rafael J. Wysocki]

Hi,

On Tuesday, 3 of May 2005 00:54, Andrew Morton wrote:
> "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> >
> > Hi,
> > 
> > On Friday, 25 of March 2005 09:21, Andrew Morton wrote:
> > > 
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> > > 
> > > - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.
> > 
> > First, rmmod works again (thanks ;-)).
> > 
> > > - Again, we'd like people who have had recent DRM and USB resume problems to
> > >   test and report, please.
> > 
> > My box is still hanged solid on resume (swsusp) by the drivers:
> > 
> > ohci_hcd
> > ehci_hcd
> > yenta_socket
> > 
> > possibly others, too.  To avoid this, I had to revert the following patch from
> > the Len's tree:
> 
> Rafael, does this problem still exist in latest -mm?

Yes, it does.  I've already updated its bugzilla entry
(http://bugzilla.kernel.org/show_bug.cgi?id=4416).

Greets,
Rafael

-- 
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"