From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, sensors@Stimpy.netroedge.com
Cc: R.Marek@sh.cvut.cz
Subject: [PATCH] I2C: busses documentation update 1 of 2
Date: Thu, 31 Mar 2005 15:23:13 -0800 [thread overview]
Message-ID: <1112311393548@kroah.com> (raw)
In-Reply-To: <1112311393634@kroah.com>
ChangeSet 1.2340, 2005/03/31 14:29:46-08:00, R.Marek@sh.cvut.cz
[PATCH] I2C: busses documentation update 1 of 2
This patch just moves i2c-parport file to busses directory.
Patch for other busses documentation will follow.
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/i2c/i2c-parport | 156 -----------------------------------
Documentation/i2c/busses/i2c-parport | 156 +++++++++++++++++++++++++++++++++++
2 files changed, 156 insertions(+), 156 deletions(-)
diff -Nru a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/Documentation/i2c/busses/i2c-parport 2005-03-31 15:17:11 -08:00
@@ -0,0 +1,156 @@
+==================
+i2c-parport driver
+==================
+
+2004-07-06, Jean Delvare
+
+This is a unified driver for several i2c-over-parallel-port adapters,
+such as the ones made by Philips, Velleman or ELV. This driver is
+meant as a replacement for the older, individual drivers:
+ * i2c-philips-par
+ * i2c-elv
+ * i2c-velleman
+ * video/i2c-parport (NOT the same as this one, dedicated to home brew
+ teletext adapters)
+
+It currently supports the following devices:
+ * Philips adapter
+ * home brew teletext adapter
+ * Velleman K8000 adapter
+ * ELV adapter
+ * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
+
+These devices use different pinout configurations, so you have to tell
+the driver what you have, using the type module parameter. There is no
+way to autodetect the devices. Support for different pinout configurations
+can be easily added when needed.
+
+
+Building your own adapter
+-------------------------
+
+If you want to build you own i2c-over-parallel-port adapter, here is
+a sample electronics schema (credits go to Sylvain Munaut):
+
+Device PC
+Side ___________________Vdd (+) Side
+ | | |
+ --- --- ---
+ | | | | | |
+ |R| |R| |R|
+ | | | | | |
+ --- --- ---
+ | | |
+ | | /| |
+SCL ----------x--------o |-----------x------------------- pin 2
+ | \| | |
+ | | |
+ | |\ | |
+SDA ----------x----x---| o---x--------------------------- pin 13
+ | |/ |
+ | |
+ | /| |
+ ---------o |----------------x-------------- pin 3
+ \| | |
+ | |
+ --- ---
+ | | | |
+ |R| |R|
+ | | | |
+ --- ---
+ | |
+ ### ###
+ GND GND
+
+Remarks:
+ - This is the exact pinout and electronics used on the Analog Devices
+ evaluation boards.
+ /|
+ - All inverters -o |- must be 74HC05, they must be open collector output.
+ \|
+ - All resitors are 10k.
+ - Pins 18-25 of the parallel port connected to GND.
+ - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
+ The ADM1032 evaluation board uses D4-D7. Beware that the amount of
+ current you can draw from the parallel port is limited. Also note that
+ all connected lines MUST BE driven at the same state, else you'll short
+ circuit the output buffers! So plugging the I2C adapter after loading
+ the i2c-parport module might be a good safety since data line state
+ prior to init may be unknown.
+ - This is 5V!
+ - Obviously you cannot read SCL (so it's not really standard-compliant).
+ Pretty easy to add, just copy the SDA part and use another input pin.
+ That would give (ELV compatible pinout):
+
+
+Device PC
+Side ______________________________Vdd (+) Side
+ | | | |
+ --- --- --- ---
+ | | | | | | | |
+ |R| |R| |R| |R|
+ | | | | | | | |
+ --- --- --- ---
+ | | | |
+ | | |\ | |
+SCL ----------x--------x--| o---x------------------------ pin 15
+ | | |/ |
+ | | |
+ | | /| |
+ | ---o |-------------x-------------- pin 2
+ | \| | |
+ | | |
+ | | |
+ | |\ | |
+SDA ---------------x---x--| o--------x------------------- pin 10
+ | |/ |
+ | |
+ | /| |
+ ---o |------------------x--------- pin 3
+ \| | |
+ | |
+ --- ---
+ | | | |
+ |R| |R|
+ | | | |
+ --- ---
+ | |
+ ### ###
+ GND GND
+
+
+If possible, you should use the same pinout configuration as existing
+adapters do, so you won't even have to change the code.
+
+
+Similar (but different) drivers
+-------------------------------
+
+This driver is NOT the same as the i2c-pport driver found in the i2c package.
+The i2c-pport driver makes use of modern parallel port features so that
+you don't need additional electronics. It has other restrictions however, and
+was not ported to Linux 2.6 (yet).
+
+This driver is also NOT the same as the i2c-pcf-epp driver found in the
+lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port
+as an I2C bus directly. Instead, it uses it to control an external I2C bus
+master. That driver was not ported to Linux 2.6 (yet) either.
+
+
+Legacy documentation for Velleman adapter
+-----------------------------------------
+
+Useful links:
+Velleman http://www.velleman.be/
+Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
+
+The project has lead to new libs for the Velleman K8000 and K8005:
+ LIBK8000 v1.99.1 and LIBK8005 v0.21
+With these libs, you can control the K8000 interface card and the K8005
+stepper motor card with the simple commands which are in the original
+Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
+many more, using /dev/velleman.
+ http://home.wanadoo.nl/hihihi/libk8000.htm
+ http://home.wanadoo.nl/hihihi/libk8005.htm
+ http://struyve.mine.nu:8080/index.php?block=k8000
+ http://sourceforge.net/projects/libk8005/
diff -Nru a/Documentation/i2c/i2c-parport b/Documentation/i2c/i2c-parport
--- a/Documentation/i2c/i2c-parport 2005-03-31 15:17:11 -08:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,156 +0,0 @@
-==================
-i2c-parport driver
-==================
-
-2004-07-06, Jean Delvare
-
-This is a unified driver for several i2c-over-parallel-port adapters,
-such as the ones made by Philips, Velleman or ELV. This driver is
-meant as a replacement for the older, individual drivers:
- * i2c-philips-par
- * i2c-elv
- * i2c-velleman
- * video/i2c-parport (NOT the same as this one, dedicated to home brew
- teletext adapters)
-
-It currently supports the following devices:
- * Philips adapter
- * home brew teletext adapter
- * Velleman K8000 adapter
- * ELV adapter
- * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
-
-These devices use different pinout configurations, so you have to tell
-the driver what you have, using the type module parameter. There is no
-way to autodetect the devices. Support for different pinout configurations
-can be easily added when needed.
-
-
-Building your own adapter
--------------------------
-
-If you want to build you own i2c-over-parallel-port adapter, here is
-a sample electronics schema (credits go to Sylvain Munaut):
-
-Device PC
-Side ___________________Vdd (+) Side
- | | |
- --- --- ---
- | | | | | |
- |R| |R| |R|
- | | | | | |
- --- --- ---
- | | |
- | | /| |
-SCL ----------x--------o |-----------x------------------- pin 2
- | \| | |
- | | |
- | |\ | |
-SDA ----------x----x---| o---x--------------------------- pin 13
- | |/ |
- | |
- | /| |
- ---------o |----------------x-------------- pin 3
- \| | |
- | |
- --- ---
- | | | |
- |R| |R|
- | | | |
- --- ---
- | |
- ### ###
- GND GND
-
-Remarks:
- - This is the exact pinout and electronics used on the Analog Devices
- evaluation boards.
- /|
- - All inverters -o |- must be 74HC05, they must be open collector output.
- \|
- - All resitors are 10k.
- - Pins 18-25 of the parallel port connected to GND.
- - Pins 4-9 (D2-D7) could be used as VDD is the driver drives them high.
- The ADM1032 evaluation board uses D4-D7. Beware that the amount of
- current you can draw from the parallel port is limited. Also note that
- all connected lines MUST BE driven at the same state, else you'll short
- circuit the output buffers! So plugging the I2C adapter after loading
- the i2c-parport module might be a good safety since data line state
- prior to init may be unknown.
- - This is 5V!
- - Obviously you cannot read SCL (so it's not really standard-compliant).
- Pretty easy to add, just copy the SDA part and use another input pin.
- That would give (ELV compatible pinout):
-
-
-Device PC
-Side ______________________________Vdd (+) Side
- | | | |
- --- --- --- ---
- | | | | | | | |
- |R| |R| |R| |R|
- | | | | | | | |
- --- --- --- ---
- | | | |
- | | |\ | |
-SCL ----------x--------x--| o---x------------------------ pin 15
- | | |/ |
- | | |
- | | /| |
- | ---o |-------------x-------------- pin 2
- | \| | |
- | | |
- | | |
- | |\ | |
-SDA ---------------x---x--| o--------x------------------- pin 10
- | |/ |
- | |
- | /| |
- ---o |------------------x--------- pin 3
- \| | |
- | |
- --- ---
- | | | |
- |R| |R|
- | | | |
- --- ---
- | |
- ### ###
- GND GND
-
-
-If possible, you should use the same pinout configuration as existing
-adapters do, so you won't even have to change the code.
-
-
-Similar (but different) drivers
--------------------------------
-
-This driver is NOT the same as the i2c-pport driver found in the i2c package.
-The i2c-pport driver makes use of modern parallel port features so that
-you don't need additional electronics. It has other restrictions however, and
-was not ported to Linux 2.6 (yet).
-
-This driver is also NOT the same as the i2c-pcf-epp driver found in the
-lm_sensors package. The i2c-pcf-epp driver doesn't use the parallel port
-as an I2C bus directly. Instead, it uses it to control an external I2C bus
-master. That driver was not ported to Linux 2.6 (yet) either.
-
-
-Legacy documentation for Velleman adapter
------------------------------------------
-
-Useful links:
-Velleman http://www.velleman.be/
-Velleman K8000 Howto http://howto.htlw16.ac.at/k8000-howto.html
-
-The project has lead to new libs for the Velleman K8000 and K8005:
- LIBK8000 v1.99.1 and LIBK8005 v0.21
-With these libs, you can control the K8000 interface card and the K8005
-stepper motor card with the simple commands which are in the original
-Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
-many more, using /dev/velleman.
- http://home.wanadoo.nl/hihihi/libk8000.htm
- http://home.wanadoo.nl/hihihi/libk8005.htm
- http://struyve.mine.nu:8080/index.php?block=k8000
- http://sourceforge.net/projects/libk8005/
next prev parent reply other threads:[~2005-04-01 0:25 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-31 23:22 [BK PATCH] I2C patches for 2.6.12-rc1 Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-ite: remove interruptible_sleep_on_timeout() usage Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-elektor: " Greg KH
2005-03-31 23:23 ` [PATCH] I2C: New lm92 chip driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Cleanup adm1021 unused defines Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix adm1021 alarms mask Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill unused struct members in w83627hf driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Make master_xfer debug messages more useful Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Skip broken detection step in it87 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: group Intel on I2C Hardware Bus support Greg KH
2005-03-31 23:23 ` [PATCH] i2c: new driver for ds1337 RTC Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Clean up of i2c-elektor.c build Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix breakage in m41t00 i2c rtc driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix some i2c algorithm initialization Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill outdated defines in i2c.h Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Avoid repeated resets of i2c-viapro Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Recognize new revision of the ADT7463 chip Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix Vaio EEPROM detection Greg KH
2005-03-31 23:23 ` Greg KH [this message]
2005-03-31 23:23 ` [PATCH] I2C: busses documentation update 2 of 2 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lost arbitration detection for PCF8584 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lsb in emc6d102 and adm1027 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Delete useless instruction in it87 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix race condition in it87 driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: i2c-s3c2410 functionality and fixes Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver's Kconfig entry Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix broken force parameter handling Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix indentation of lm87 driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Drop useless w83781d RT feature Greg KH
2005-03-31 23:23 ` [PATCH] i2c: i2c-mv64xxx - set adapter owner and class fields Greg KH
2005-04-07 9:45 ` [PATCH] i2c: new driver for ds1337 RTC Ladislav Michl
2005-04-07 9:59 ` Jean Delvare
2005-04-07 11:16 ` Ladislav Michl
2005-04-07 13:07 ` Jean Delvare
2005-04-07 14:28 ` Ladislav Michl
2005-04-07 21:18 ` Greg KH
2005-04-07 23:17 ` [PATCH] ds1337 1/4 Ladislav Michl
2005-04-07 23:36 ` Greg KH
2005-04-08 13:00 ` Ladislav Michl
2005-04-08 16:31 ` James Chapman
2005-05-02 20:41 ` Greg KH
2005-04-08 8:49 ` Jean Delvare
2005-04-07 23:18 ` [PATCH] ds1337 2/4 Ladislav Michl
2005-04-08 8:51 ` Jean Delvare
2005-04-08 13:02 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-04-07 23:18 ` [PATCH] ds1337 3/4 Ladislav Michl
2005-04-08 10:08 ` Jean Delvare
2005-04-08 13:06 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-05-04 6:13 ` [PATCH] ds1337 1/3 Ladislav Michl
2005-05-04 8:41 ` Jean Delvare
2005-05-04 6:13 ` [PATCH] ds1337 2/3 Ladislav Michl
2005-05-04 9:44 ` Jean Delvare
2005-05-04 6:14 ` [PATCH] ds1337 3/3 Ladislav Michl
2005-05-04 10:07 ` Jean Delvare
2005-05-10 12:08 ` [PATCH] ds1337 driver works also with ds1339 chip Ladislav Michl
2005-05-10 12:40 ` Jean Delvare
2005-05-10 12:48 ` Russell King
[not found] ` <1DTwF8-18P-00@press.kroah.org>
[not found] ` <20050508204021.627f9cd1.khali@linux-fr.org>
[not found] ` <427E6E21.60001@katalix.com>
[not found] ` <20050508222351.08bfe2e1.khali@linux-fr.org>
2005-05-10 12:18 ` [PATCH] ds1337: export ds1337_do_command Ladislav Michl
2005-05-10 12:51 ` Jean Delvare
2005-05-10 17:55 ` Greg KH
2005-05-10 18:36 ` Ladislav Michl
2005-05-10 20:30 ` Greg KH
2005-05-11 8:32 ` Ladislav Michl
2005-04-07 23:19 ` [PATCH] ds1337 4/4 Ladislav Michl
2005-04-08 11:08 ` Jean Delvare
2005-04-08 12:35 ` Ladislav Michl
2005-04-08 16:21 ` Jean Delvare
2005-04-08 17:44 ` James Chapman
2005-04-10 19:51 ` Ladislav Michl
2005-04-10 21:10 ` Jean Delvare
2005-04-12 18:10 ` James Chapman
2005-04-13 11:04 ` Ladislav Michl
2005-04-13 19:02 ` James Chapman
2005-04-13 19:48 ` Ladislav Michl
2005-04-07 21:29 ` [PATCH] i2c: new driver for ds1337 RTC Jean Delvare
2005-04-07 23:16 ` Ladislav Michl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1112311393548@kroah.com \
--to=gregkh@suse.de \
--cc=R.Marek@sh.cvut.cz \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@Stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox