From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, linux-pci@atrey.karlin.mff.cuni.cz
Cc: kimball.murray@stratus.com
Subject: [PATCH] PCI: Patch for Serverworks chips in hotplug environment
Date: Fri, 1 Apr 2005 15:47:50 -0800 [thread overview]
Message-ID: <11123992702166@kroah.com> (raw)
In-Reply-To: <11123992704154@kroah.com>
ChangeSet 1.2181.16.6, 2005/03/17 10:23:26-08:00, kimball.murray@stratus.com
[PATCH] PCI: Patch for Serverworks chips in hotplug environment
From: Kimball Murray <kimball.murray@stratus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/ide/pci/serverworks.c | 8 ++++----
drivers/pci/quirks.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff -Nru a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
--- a/drivers/ide/pci/serverworks.c 2005-04-01 15:38:06 -08:00
+++ b/drivers/ide/pci/serverworks.c 2005-04-01 15:38:06 -08:00
@@ -341,7 +341,7 @@
return __ide_dma_end(drive);
}
-static unsigned int __init init_chipset_svwks (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
{
unsigned int reg;
u8 btr;
@@ -508,7 +508,7 @@
}
#undef CAN_SW_DMA
-static void __init init_hwif_svwks (ide_hwif_t *hwif)
+static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{
u8 dma_stat = 0;
@@ -556,7 +556,7 @@
/*
* We allow the BM-DMA driver to only work on enabled interfaces.
*/
-static void __init init_dma_svwks (ide_hwif_t *hwif, unsigned long dmabase)
+static void __devinit init_dma_svwks (ide_hwif_t *hwif, unsigned long dmabase)
{
struct pci_dev *dev = hwif->pci_dev;
@@ -568,7 +568,7 @@
ide_setup_dma(hwif, dmabase, 8);
}
-static int __init init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
{
return ide_setup_pci_device(dev, d);
}
diff -Nru a/drivers/pci/quirks.c b/drivers/pci/quirks.c
--- a/drivers/pci/quirks.c 2005-04-01 15:38:06 -08:00
+++ b/drivers/pci/quirks.c 2005-04-01 15:38:06 -08:00
@@ -700,7 +700,7 @@
/*
* Serverworks CSB5 IDE does not fully support native mode
*/
-static void __init quirk_svwks_csb5ide(struct pci_dev *pdev)
+static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
{
u8 prog;
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
next prev parent reply other threads:[~2005-04-02 0:13 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-01 23:45 [BK PATCH] PCI update for 2.6.12-rc1 Greg KH
2005-04-01 23:47 ` PCI: increase the size of the pci.ids strings Greg KH
2005-04-01 23:47 ` Remove item from feature-removal-schedule.txt that was already removed from the kernel Greg KH
2005-04-01 23:47 ` PCI: add CONFIG_PCI_NAMES to the feature-removal-schedule.txt file Greg KH
2005-04-01 23:47 ` [PATCH] PCI: sync up with the latest pci.ids file from sf.net Greg KH
2005-04-01 23:47 ` [PATCH] PCI: Add PCI device ID for new Mellanox HCA Greg KH
2005-04-01 23:47 ` Greg KH [this message]
2005-04-01 23:47 ` PCI: fix an oops in some pci devices on hotplug remove when their resources are being freed Greg KH
2005-04-01 23:47 ` [PATCH] PCI: trivial DBG tidy-up Greg KH
2005-04-01 23:47 ` [PATCH] PCI Hotplug: remove code duplication in drivers/pci/hotplug/ibmphp_pci.c Greg KH
2005-04-01 23:47 ` [PATCH] PCI Hotplug: only call ibmphp_remove_resource() if argument is not NULL Greg KH
2005-04-01 23:47 ` [PATCH] PCI: 80 column lines Greg KH
2005-04-01 23:47 ` [PATCH] [PATCH] remove redundant devices list Greg KH
2005-04-01 23:47 ` [PATCH] PCI busses are structs, not integers Greg KH
2005-04-01 23:47 ` [PATCH] pci_ids.h correction for Intel ICH7M Greg KH
2005-04-01 23:47 ` [PATCH] sort-out-pci_rom_address_enable-vs-ioresource_rom_enable.patch Greg KH
2005-04-01 23:47 ` [PATCH] arch/i386/pci/i386.c: Use new for_each_pci_dev macro Greg KH
2005-04-01 23:47 ` PCI Hotplug: enforce the rule that a hotplug slot needs a release function Greg KH
2005-04-01 23:47 ` [PATCH] PCI Hotplug: add documentation about release pointer Greg KH
2005-04-01 23:47 ` [PATCH] PCI: Quirk for Asus M5N Greg KH
2005-04-01 23:47 ` [PATCH] drivers/pci/hotplug/cpqphp_core.c: fix a check after use Greg KH
2005-04-01 23:47 ` [PATCH] PCI: shrink drivers/pci/proc.c::pci_seq_start() Greg KH
2005-04-01 23:47 ` [PATCH] PCI: handle multiple video cards on the same bus Greg KH
2005-04-01 23:47 ` [PATCH] PCI: remove pci_find_device usage from pci sysfs code Greg KH
2005-04-01 23:47 ` [PATCH] drivers/pci/msi.c: fix a check after use Greg KH
2005-04-01 23:47 ` PCI: clean up the dynamic id logic a little bit Greg KH
2005-04-01 23:47 ` [PATCH] PCI: create PCI_DEBUG config option to make it easier for users to enable pci debugging Greg KH
2005-04-02 12:20 ` [PATCH] PCI Hotplug: remove code duplication in drivers/pci/hotplug/ibmphp_pci.c Rolf Eike Beer
2005-04-02 19:26 ` Andrew Morton
2005-04-08 0:07 ` Greg KH
2005-04-08 7:02 ` Rolf Eike Beer
2005-04-02 1:10 ` PCI: fix an oops in some pci devices on hotplug remove when their resources are being freed Matthew Wilcox
2005-04-02 3:31 ` Greg KH
2005-04-02 3:53 ` Matthew Wilcox
2005-04-02 4:04 ` Greg KH
2005-04-04 20:11 ` PCI: increase the size of the pci.ids strings Giuseppe Bilotta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11123992702166@kroah.com \
--to=gregkh@suse.de \
--cc=greg@kroah.com \
--cc=kimball.murray@stratus.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox