From: Kenan Esau <kenan.esau@conan.de>
To: Dmitry Torokhov <dtor_core@ameritech.net>
Cc: harald.hoyer@redhat.de, linux-input@atrey.karlin.mff.cuni.cz,
linux-kernel@vger.kernel.org, Vojtech Pavlik <vojtech@suse.cz>
Subject: Re: [PATCH 4/4] psmouse: dynamic protocol switching via sysfs
Date: Mon, 04 Apr 2005 08:48:34 +0200 [thread overview]
Message-ID: <1112597314.3625.13.camel@localhost> (raw)
In-Reply-To: <200504040045.19263.dtor_core@ameritech.net>
Am Montag, den 04.04.2005, 00:45 -0500 schrieb Dmitry Torokhov:
> Hi Kenan,
>
[..]
> > If I do "echo -n 50 > resolution" "0xe8 0x01" is sent. I don't know if
> > this is correct for "usual" PS/2-devices but for the lifebook it's
> > wrong.
> >
> > For the lifebook the parameters are as following:
> >
> > 50cpi <=> 0x00
> > 100cpi <=> 0x01
> > 200cpi <=> 0x02
> > 400cpi <=> 0x03
> >
>
> "Classic" PS/2 protocol specifies available resolutions of 1, 2, 4 and 8
> units per mm which gives you 25, 50, 100 and 200 cpi respectively. I am
> surprised that Lifebook simply doubles the rates, but if it does I guess
> the patch below will suffice.
Yes -- exactly. That was what I was thinking about. I was just not shure
whether it is lifebook specific or not.
I haven't tested the patch yet. But by inspecting the code it looks
good ;-)
next prev parent reply other threads:[~2005-04-04 6:52 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-11 20:10 [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver Vojtech Pavlik
2005-02-12 17:01 ` Kenan Esau
2005-02-12 17:46 ` Arjan van de Ven
2005-02-13 9:39 ` Kenan Esau
2005-02-13 11:46 ` Vojtech Pavlik
2005-02-12 18:17 ` Dmitry Torokhov
2005-02-12 18:34 ` Vojtech Pavlik
2005-02-13 10:05 ` Kenan Esau
2005-02-13 12:01 ` Vojtech Pavlik
2005-02-13 18:14 ` Kenan Esau
2005-02-13 19:02 ` Vojtech Pavlik
[not found] ` <200502130149.11183.dtor_core@ameritech.net>
2005-02-13 8:36 ` Vojtech Pavlik
2005-02-14 10:06 ` Harald Hoyer
2005-02-15 8:57 ` Kenan Esau
2005-02-15 13:43 ` Vojtech Pavlik
2005-02-15 14:43 ` Dmitry Torokhov
2005-02-15 17:03 ` Kenan Esau
2005-02-15 17:09 ` Vojtech Pavlik
2005-02-15 17:42 ` Dmitry Torokhov
2005-02-15 17:15 ` Kenan Esau
2005-02-16 18:34 ` Kenan Esau
2005-02-16 21:35 ` Vojtech Pavlik
2005-02-17 14:19 ` Kenan Esau
2005-02-17 15:04 ` Vojtech Pavlik
2005-02-17 19:42 ` Vojtech Pavlik
2005-02-19 12:54 ` Kenan Esau
2005-02-19 13:16 ` Vojtech Pavlik
2005-02-21 8:06 ` Kenan Esau
2005-02-24 9:03 ` Vojtech Pavlik
2005-03-01 8:11 ` Kenan Esau
2005-03-01 12:08 ` Vojtech Pavlik
2005-03-07 7:27 ` Kenan Esau
2005-03-07 7:34 ` Vojtech Pavlik
2005-03-15 13:25 ` Kenan Esau
2005-03-21 12:44 ` Vojtech Pavlik
2005-03-21 14:52 ` Dmitry Torokhov
2005-03-21 15:31 ` Kenan Esau
2005-03-21 15:44 ` Dmitry Torokhov
2005-03-22 7:13 ` Dmitry Torokhov
2005-03-22 7:14 ` [PATCH 1/4] Lifebook: dmi on x86 only Dmitry Torokhov
2005-03-22 7:15 ` [PATCH 2/4] Lifebook: various cleanups Dmitry Torokhov
2005-03-22 7:16 ` [PATCH 3/4] Lifebook: rearrange init code Dmitry Torokhov
2005-03-22 7:17 ` [PATCH 4/4] psmouse: dynamic protocol switching via sysfs Dmitry Torokhov
2005-04-03 19:49 ` Kenan Esau
2005-04-04 5:45 ` Dmitry Torokhov
2005-04-04 6:48 ` Kenan Esau [this message]
2005-03-22 7:29 ` [PATCH 1/4] Lifebook: dmi on x86 only Dave Jones
2005-03-22 7:33 ` Dmitry Torokhov
2005-03-22 14:01 ` Alan Cox
2005-03-22 10:01 ` [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver Andrey Panin
2005-03-22 14:20 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1112597314.3625.13.camel@localhost \
--to=kenan.esau@conan.de \
--cc=dtor_core@ameritech.net \
--cc=harald.hoyer@redhat.de \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox