From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261737AbVFPGyj (ORCPT ); Thu, 16 Jun 2005 02:54:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261162AbVFPGyj (ORCPT ); Thu, 16 Jun 2005 02:54:39 -0400 Received: from smtp11.wanadoo.fr ([193.252.22.31]:34376 "EHLO smtp11.wanadoo.fr") by vger.kernel.org with ESMTP id S261739AbVFPGx2 (ORCPT ); Thu, 16 Jun 2005 02:53:28 -0400 X-ME-UUID: 20050616065322325.4F5E21C0009C@mwinf1108.wanadoo.fr Subject: 2.6.11: nforce3 250gb lockups From: Xavier Bestel To: linux-kernel@vger.kernel.org Content-Type: text/plain Date: Thu, 16 Jun 2005 08:54:09 +0200 Message-Id: <1118904850.5709.15.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.2.1.1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I have a brand new computer, with an MSI K8N Neo (nforce3-based) which lockups quite easily. It seems it happens when I play audio for a while, or when accessing hd under load. With "nolapic", the boot stops when accessing hda, with something like "hda interrupt timeout" repeating on the screen. With "noapic nolapic", it boots normally but doesn't lockup less. The Ubuntu install CD lockups at boot even with "noapic nolapic". The kernel is the stock debian/sid 2.6.11-9-amd64-k8, the userspace is i386 (32bits). lspci and dmesg at the bottom of this mail. The only advices I found by googling were to try nolapic (which I did without success) or the binary drivers (which I won't try). Is there anything I can do, short of trying to return it to my reseller ? Thanks, Xav 0000:00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) 0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) 0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) 0000:00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) 0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) 0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) 0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) 0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS 0000:02:09.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) Bootdata ok (command line is root=/dev/hda5 ro ) Linux version 2.6.11-9-amd64-k8 (root@lobo) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 Fri May 27 17:14:56 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f71e0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff7a00 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 258032 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Nvidia board detected. Ignoring ACPI timer override. ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ d0000000 size 128 MB Built 1 zonelists Kernel command line: root=/dev/hda5 ro console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2009.807 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1022784k/1048512k available (1745k kernel code, 24984k reserved, 949k data, 140k init) Calibrating delay loop... 3981.31 BogoMIPS (lpj=1990656) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC NMI watchdog using perfctr0 Using local APIC timer interrupts. Detected 12.561 MHz APIC timer. checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 128M @ 0xd0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1118903828.179:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4180KiB [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 140k freed NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: WDC WD400BB-32BSA0, ATA DISK drive hdb: HITACHI DVD-ROM GD-7500, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ST340824A, ATA DISK drive hdd: DVDRW IDE 16X, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 > hdc: max request size: 128KiB hdc: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdc: cache flushes not supported /dev/ide/host0/bus1/target0/lun0: p1 p2 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 1048784k swap on /dev/hdc1. Priority:-1 extents:1 Adding 1043240k swap on /dev/hda6. Priority:-2 extents:1 EXT3 FS on hda5, internal journal 8139too Fast Ethernet driver 0.9.27 w83627hf 0-0290: Reading VID from GPIO5 Losing some ticks... checking if CPU frequency changed. input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ts: Compaq touchscreen protocol output ReiserFS: hdc2: found reiserfs format "3.6" with standard journal ReiserFS: hdc2: using ordered data mode ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc2: checking transaction log (hdc2) ReiserFS: hdc2: Using r5 hash to sort names EXT2-fs warning (device hda7): ext2_fill_super: mounting ext3 filesystem as ext2 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[de004000-de0047ff] Max Packet=[2048] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 23 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:05.0 to 64 eth0: forcedeth.c: subsystem: 01462:0300 bound to 0000:00:05.0 SCSI subsystem initialized libata version 1.10 loaded. sata_nv version 0.6 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 22 ieee1394: Host added: ID:BUS[0-00:1023] GUID[230050c500001713] eth1394: $Rev: 1224 $ Ben Collins eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: no device found (phy stat 00000000) scsi1 : sata_nv Vendor: ATA Model: ST3160827AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 21 (level, high) -> IRQ 21 ehci_hcd 0000:00:02.2: PCI device 10de:00e8 (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 21, pci mem 0xdf005000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: unknown partition table Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4c40 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, high) -> IRQ 20 ohci_hcd 0000:00:02.0: PCI device 10de:00e7 (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 20, pci mem 0xdf003000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 23 (level, high) -> IRQ 23 ohci_hcd 0000:00:02.1: PCI device 10de:00e7 (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 23, pci mem 0xdf004000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49871 usecs intel8x0: clocking to 46784 ioctl32(alsactl:4914): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd7ac) on /dev/snd/controlC0 ioctl32(amixer:4955): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:4988): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:4991): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:4994): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:4997): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd8ac) on /dev/snd/controlC0 ioctl32(amixer:5000): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5003): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5006): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5009): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5012): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5015): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5018): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5021): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5024): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5027): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd89c) on /dev/snd/controlC0 ioctl32(amixer:5030): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd88c) on /dev/snd/controlC0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 NET: Registered protocol family 17 nfs warning: mount version older than kernel IA-32 Microcode Update Driver: v1.14 microcode: CPU0 not a capable Intel processor microcode: No new microcode data for CPU0 IA-32 Microcode Update Driver v1.14 unregistered ACPI: Power Button (FF) [PWRF] ioctl32(alsactl:5699): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd83c) on /dev/snd/controlC0 ioctl32(amixer:5703): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5706): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5709): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5712): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5715): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5718): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5721): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5724): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5727): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5730): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd91c) on /dev/snd/controlC0 ioctl32(amixer:5733): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5736): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5739): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd92c) on /dev/snd/controlC0 ioctl32(amixer:5742): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd91c) on /dev/snd/controlC0 ioctl32(amixer:5745): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd91c) on /dev/snd/controlC0 ioctl32(amixer:5748): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd91c) on /dev/snd/controlC0 ioctl32(alsactl:5753): Unknown cmd fd(3) cmd(80045500){00} arg(ffffd83c) on /dev/snd/controlC0 parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8036fd60(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present Xorg: vm86 mode not supported on 64 bit kernel [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS ioctl32(Xorg:6085): Unknown cmd fd(7) cmd(c0106407){00} arg(ffffda80) on /dev/dri/card0 ioctl32(Xorg:6085): Unknown cmd fd(7) cmd(c0086401){00} arg(ffffda88) on /dev/dri/card0 ioctl32(Xorg:6085): Unknown cmd fd(7) cmd(c0246400){00} arg(0873d678) on /dev/dri/card0 ioctl32(Xorg:6085): Unknown cmd fd(7) cmd(c0246400){00} arg(0873d678) on /dev/dri/card0 ioctl32(Xorg:6085): Unknown cmd fd(7) cmd(c0106407){00} arg(ffffdae0) on /dev/dri/card0 ioctl32(Xorg:6085): Unknown cmd fd(7) cmd(40086410){00} arg(ffffdaf0) on /dev/dri/card0