Re: [PATCH] staging: rts5208: Replace delay function.

[Karolina Stolarek <karolina.stolarek@intel.com>]

On 18.10.2023 09:03, Julia Lawall wrote:
> 
> 
> On Tue, 17 Oct 2023, kenechukwu maduechesi wrote:
> 
>> Replace udelay() with usleep_range() for more precise delay handling.
>>
>> Reported by checkpatch:
>>
>> CHECK: usleep_range is preferred over udelay
> 
> This message is typically not a good candidate for outreachy patches,
> because you need access to the device to be sure that any change is
> correct.

Could we add a paragraph on how to pick good checkpatch.pl error to fix 
to the Outreachyfirstpatch docs? This could go to "Find a driver to 
clean up" section, for example.

All the best,
Karolina

> 
> julia
> 
>>
>> Signed-off-by: kenechukwu maduechesi <maduechesik@gmail.com>
>> ---
>>   drivers/staging/rts5208/sd.c | 10 +++++-----
>>   1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/staging/rts5208/sd.c b/drivers/staging/rts5208/sd.c
>> index 74c4f476b3a4..059f99b0a727 100644
>> --- a/drivers/staging/rts5208/sd.c
>> +++ b/drivers/staging/rts5208/sd.c
>> @@ -865,7 +865,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
>>   						     PHASE_CHANGE);
>>   			if (retval)
>>   				return retval;
>> -			udelay(50);
>> +			usleep_range(50);
>>   			retval = rtsx_write_register(chip, SD_VP_CTL, 0xFF,
>>   						     PHASE_CHANGE |
>>   						     PHASE_NOT_RESET |
>> @@ -877,14 +877,14 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
>>   						     CHANGE_CLK, CHANGE_CLK);
>>   			if (retval)
>>   				return retval;
>> -			udelay(50);
>> +			usleep_range(50);
>>   			retval = rtsx_write_register(chip, SD_VP_CTL, 0xFF,
>>   						     PHASE_NOT_RESET |
>>   						     sample_point);
>>   			if (retval)
>>   				return retval;
>>   		}
>> -		udelay(100);
>> +		usleep_range(100);
>>
>>   		rtsx_init_cmd(chip);
>>   		rtsx_add_cmd(chip, WRITE_REG_CMD, SD_DCMPS_CTL, DCMPS_CHANGE,
>> @@ -918,7 +918,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
>>   				return retval;
>>   		}
>>
>> -		udelay(50);
>> +		usleep_range(50);
>>   	}
>>
>>   	retval = rtsx_write_register(chip, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
>> @@ -1416,7 +1416,7 @@ static int sd_wait_data_idle(struct rtsx_chip *chip)
>>   			retval = STATUS_SUCCESS;
>>   			break;
>>   		}
>> -		udelay(100);
>> +		usleep_range(100);
>>   	}
>>   	dev_dbg(rtsx_dev(chip), "SD_DATA_STATE: 0x%02x\n", val);
>>
>> --
>> 2.25.1
>>
>>
>>
>