* [PATCH] I2C: documentation update 3/3 [not found] <1119417466661@kroah.com> @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: lm90 uses new sysfs callbacks Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: R.Marek [PATCH] I2C: documentation update 3/3 This patch adds information about available userspace utillities for system health monitoring drivers. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 828621dda6381093ceafbe9381b6118cae3f9b13 tree 60fae466a2a5af340d156da1532c3ceb9c6bab5b parent 7f15b66468b7003d5241e352a007e73be5519b20 author R.Marek@sh.cvut.cz <R.Marek@sh.cvut.cz> Thu, 26 May 2005 12:42:29 +0000 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:02 -0700 Documentation/i2c/userspace-tools | 39 +++++++++++++++++++++++++++++++++++++ 1 files changed, 39 insertions(+), 0 deletions(-) diff --git a/Documentation/i2c/userspace-tools b/Documentation/i2c/userspace-tools new file mode 100644 --- /dev/null +++ b/Documentation/i2c/userspace-tools @@ -0,0 +1,39 @@ +Introduction +------------ + +Most mainboards have sensor chips to monitor system health (like temperatures, +voltages, fans speed). They are often connected through an I2C bus, but some +are also connected directly through the ISA bus. + +The kernel drivers make the data from the sensor chips available in the /sys +virtual filesystem. Userspace tools are then used to display or set or the +data in a more friendly manner. + +Lm-sensors +---------- + +Core set of utilites that will allow you to obtain health information, +setup monitoring limits etc. You can get them on their homepage +http://www.lm-sensors.nu/ or as a package from your Linux distribution. + +If from website: +Get lmsensors from project web site. Please note, you need only userspace +part, so compile with "make user_install" target. + +General hints to get things working: + +0) get lm-sensors userspace utils +1) compile all drivers in I2C section as modules in your kernel +2) run sensors-detect script, it will tell you what modules you need to load. +3) load them and run "sensors" command, you should see some results. +4) fix sensors.conf, labels, limits, fan divisors +5) if any more problems consult FAQ, or documentation + +Other utilites +-------------- + +If you want some graphical indicators of system health look for applications +like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd, +hardware-monitor + +If you are server administrator you can try snmpd or mrtgutils. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: lm90 uses new sysfs callbacks 2005-06-22 5:17 ` [PATCH] I2C: documentation update 3/3 Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: add adm9240 driver documentation Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: lm90 uses new sysfs callbacks I updated the lm90 hardware monitoring driver to take benefit of Yani Ioannou's new sysfs callback capabilities. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 30d7394b1a3df0e7cc145a543846109babd4d53b tree e1118dba668df2123558a0a25913c4d4f460eae8 parent a0ef14837a2298a4748e2a3e8e206f086dd3b21a author Jean Delvare <khali@linux-fr.org> Sun, 05 Jun 2005 21:27:28 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:03 -0700 drivers/i2c/chips/lm90.c | 270 ++++++++++++++++++++++++++-------------------- 1 files changed, 150 insertions(+), 120 deletions(-) diff --git a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c --- a/drivers/i2c/chips/lm90.c +++ b/drivers/i2c/chips/lm90.c @@ -1,7 +1,7 @@ /* * lm90.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org> * * Based on the lm83 driver. The LM90 is a sensor chip made by National * Semiconductor. It reports up to two temperatures (its own plus up to @@ -76,6 +76,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> +#include <linux/i2c-sysfs.h> /* * Addresses to scan @@ -205,9 +206,14 @@ struct lm90_data { int kind; /* registers values */ - s8 temp_input1, temp_low1, temp_high1; /* local */ - s16 temp_input2, temp_low2, temp_high2; /* remote, combined */ - s8 temp_crit1, temp_crit2; + s8 temp8[5]; /* 0: local input + 1: local low limit + 2: local high limit + 3: local critical limit + 4: remote critical limit */ + s16 temp11[3]; /* 0: remote input + 1: remote low limit + 2: remote high limit */ u8 temp_hyst; u8 alarms; /* bitvector */ }; @@ -216,75 +222,88 @@ struct lm90_data { * Sysfs stuff */ -#define show_temp(value, converter) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm90_data *data = lm90_update_device(dev); \ - return sprintf(buf, "%d\n", converter(data->value)); \ -} -show_temp(temp_input1, TEMP1_FROM_REG); -show_temp(temp_input2, TEMP2_FROM_REG); -show_temp(temp_low1, TEMP1_FROM_REG); -show_temp(temp_low2, TEMP2_FROM_REG); -show_temp(temp_high1, TEMP1_FROM_REG); -show_temp(temp_high2, TEMP2_FROM_REG); -show_temp(temp_crit1, TEMP1_FROM_REG); -show_temp(temp_crit2, TEMP1_FROM_REG); - -#define set_temp1(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm90_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - if (data->kind == adt7461) \ - data->value = TEMP1_TO_REG_ADT7461(val); \ - else \ - data->value = TEMP1_TO_REG(val); \ - i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -#define set_temp2(value, regh, regl) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm90_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - if (data->kind == adt7461) \ - data->value = TEMP2_TO_REG_ADT7461(val); \ - else \ - data->value = TEMP2_TO_REG(val); \ - i2c_smbus_write_byte_data(client, regh, data->value >> 8); \ - i2c_smbus_write_byte_data(client, regl, data->value & 0xff); \ - up(&data->update_lock); \ - return count; \ -} -set_temp1(temp_low1, LM90_REG_W_LOCAL_LOW); -set_temp2(temp_low2, LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL); -set_temp1(temp_high1, LM90_REG_W_LOCAL_HIGH); -set_temp2(temp_high2, LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL); -set_temp1(temp_crit1, LM90_REG_W_LOCAL_CRIT); -set_temp1(temp_crit2, LM90_REG_W_REMOTE_CRIT); - -#define show_temp_hyst(value, basereg) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm90_data *data = lm90_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->basereg) \ - - TEMP1_FROM_REG(data->temp_hyst)); \ +static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm90_data *data = lm90_update_device(dev); + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])); } -show_temp_hyst(temp_hyst1, temp_crit1); -show_temp_hyst(temp_hyst2, temp_crit2); -static ssize_t set_temp_hyst1(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + static const u8 reg[4] = { + LM90_REG_W_LOCAL_LOW, + LM90_REG_W_LOCAL_HIGH, + LM90_REG_W_LOCAL_CRIT, + LM90_REG_W_REMOTE_CRIT, + }; + + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct lm90_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + int nr = attr->index; + + down(&data->update_lock); + if (data->kind == adt7461) + data->temp8[nr] = TEMP1_TO_REG_ADT7461(val); + else + data->temp8[nr] = TEMP1_TO_REG(val); + i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]); + up(&data->update_lock); + return count; +} + +static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm90_data *data = lm90_update_device(dev); + return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index])); +} + +static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + static const u8 reg[4] = { + LM90_REG_W_REMOTE_LOWH, + LM90_REG_W_REMOTE_LOWL, + LM90_REG_W_REMOTE_HIGHH, + LM90_REG_W_REMOTE_HIGHL, + }; + + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct lm90_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + int nr = attr->index; + + down(&data->update_lock); + if (data->kind == adt7461) + data->temp11[nr] = TEMP2_TO_REG_ADT7461(val); + else + data->temp11[nr] = TEMP2_TO_REG(val); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], + data->temp11[nr] >> 8); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], + data->temp11[nr] & 0xff); + up(&data->update_lock); + return count; +} + +static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm90_data *data = lm90_update_device(dev); + return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]) + - TEMP1_FROM_REG(data->temp_hyst)); +} + +static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm90_data *data = i2c_get_clientdata(client); @@ -292,36 +311,37 @@ static ssize_t set_temp_hyst1(struct dev long hyst; down(&data->update_lock); - hyst = TEMP1_FROM_REG(data->temp_crit1) - val; + hyst = TEMP1_FROM_REG(data->temp8[3]) - val; i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, HYST_TO_REG(hyst)); up(&data->update_lock); return count; } -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, + char *buf) { struct lm90_data *data = lm90_update_device(dev); return sprintf(buf, "%d\n", data->alarms); } -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); -static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_low1, - set_temp_low1); -static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, - set_temp_low2); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1, - set_temp_high1); -static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, - set_temp_high2); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit1, - set_temp_crit1); -static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, - set_temp_crit2); -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst1, - set_temp_hyst1); -static DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_hyst2, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 1); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 1); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 2); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 2); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 3); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 4); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, + set_temphyst, 3); +static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); /* @@ -480,16 +500,26 @@ static int lm90_detect(struct i2c_adapte lm90_init_client(new_client); /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_crit.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_crit_hyst.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); return 0; @@ -540,16 +570,16 @@ static struct lm90_data *lm90_update_dev u8 oldh, newh; dev_dbg(&client->dev, "Updating lm90 data.\n"); - data->temp_input1 = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_TEMP); - data->temp_high1 = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_HIGH); - data->temp_low1 = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_LOW); - data->temp_crit1 = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_CRIT); - data->temp_crit2 = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_CRIT); + data->temp8[0] = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_TEMP); + data->temp8[1] = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_LOW); + data->temp8[2] = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_HIGH); + data->temp8[3] = i2c_smbus_read_byte_data(client, + LM90_REG_R_LOCAL_CRIT); + data->temp8[4] = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_CRIT); data->temp_hyst = i2c_smbus_read_byte_data(client, LM90_REG_R_TCRIT_HYST); @@ -569,13 +599,13 @@ static struct lm90_data *lm90_update_dev */ oldh = i2c_smbus_read_byte_data(client, LM90_REG_R_REMOTE_TEMPH); - data->temp_input2 = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); + data->temp11[0] = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPL); newh = i2c_smbus_read_byte_data(client, LM90_REG_R_REMOTE_TEMPH); if (newh != oldh) { - data->temp_input2 = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); + data->temp11[0] = i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_TEMPL); #ifdef DEBUG oldh = i2c_smbus_read_byte_data(client, LM90_REG_R_REMOTE_TEMPH); @@ -585,16 +615,16 @@ static struct lm90_data *lm90_update_dev "wrong.\n"); #endif } - data->temp_input2 |= (newh << 8); + data->temp11[0] |= (newh << 8); - data->temp_high2 = (i2c_smbus_read_byte_data(client, + data->temp11[1] = (i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_LOWH) << 8) + + i2c_smbus_read_byte_data(client, + LM90_REG_R_REMOTE_LOWL); + data->temp11[2] = (i2c_smbus_read_byte_data(client, LM90_REG_R_REMOTE_HIGHH) << 8) + i2c_smbus_read_byte_data(client, LM90_REG_R_REMOTE_HIGHL); - data->temp_low2 = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWL); data->alarms = i2c_smbus_read_byte_data(client, LM90_REG_R_STATUS); ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: add adm9240 driver documentation 2005-06-22 5:17 ` [PATCH] I2C: lm90 uses new sysfs callbacks Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: pcf8574 driver cleanup Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: grant_lkml [PATCH] I2C: add adm9240 driver documentation This patch adds adm9240 driver doc, with thanks to Rudolf Marek for review. Signed-off-by: Grant Coady <gcoady@gmail.com> Acked-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit a0ef14837a2298a4748e2a3e8e206f086dd3b21a tree 78e06fec1c9f157b4c51ca3f4c1f3d142a0a45ca parent eb071cbbc38efa4b1d707f540de2ec6283ab0894 author Grant Coady <grant_lkml@dodo.com.au> Fri, 03 Jun 2005 10:05:19 +1000 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:03 -0700 Documentation/i2c/chips/adm9240 | 177 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 177 insertions(+), 0 deletions(-) diff --git a/Documentation/i2c/chips/adm9240 b/Documentation/i2c/chips/adm9240 new file mode 100644 --- /dev/null +++ b/Documentation/i2c/chips/adm9240 @@ -0,0 +1,177 @@ +Kernel driver adm9240 +===================== + +Supported chips: + * Analog Devices ADM9240 + Prefix: 'adm9240' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Publicly available at the Analog Devices website + http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf + + * Dallas Semiconductor DS1780 + Prefix: 'ds1780' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Publicly available at the Dallas Semiconductor (Maxim) website + http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf + + * National Semiconductor LM81 + Prefix: 'lm81' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/ds.cgi/LM/LM81.pdf + +Authors: + Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + Michiel Rook <michiel@grendelproject.nl>, + Grant Coady <gcoady@gmail.com> with guidance + from Jean Delvare <khali@linux-fr.org> + +Interface +--------- +The I2C addresses listed above assume BIOS has not changed the +chip MSB 5-bit address. Each chip reports a unique manufacturer +identification code as well as the chip revision/stepping level. + +Description +----------- +[From ADM9240] The ADM9240 is a complete system hardware monitor for +microprocessor-based systems, providing measurement and limit comparison +of up to four power supplies and two processor core voltages, plus +temperature, two fan speeds and chassis intrusion. Measured values can +be read out via an I2C-compatible serial System Management Bus, and values +for limit comparisons can be programmed in over the same serial bus. The +high speed successive approximation ADC allows frequent sampling of all +analog channels to ensure a fast interrupt response to any out-of-limit +measurement. + +The ADM9240, DS1780 and LM81 are register compatible, the following +details are common to the three chips. Chip differences are described +after this section. + + +Measurements +------------ +The measurement cycle + +The adm9240 driver will take a measurement reading no faster than once +each two seconds. User-space may read sysfs interface faster than the +measurement update rate and will receive cached data from the most +recent measurement. + +ADM9240 has a very fast 320us temperature and voltage measurement cycle +with independent fan speed measurement cycles counting alternating rising +edges of the fan tacho inputs. + +DS1780 measurement cycle is about once per second including fan speed. + +LM81 measurement cycle is about once per 400ms including fan speed. +The LM81 12-bit extended temperature measurement mode is not supported. + +Temperature +----------- +On chip temperature is reported as degrees Celsius as 9-bit signed data +with resolution of 0.5 degrees Celsius. High and low temperature limits +are 8-bit signed data with resolution of one degree Celsius. + +Temperature alarm is asserted once the temperature exceeds the high limit, +and is cleared when the temperature falls below the temp1_max_hyst value. + +Fan Speed +--------- +Two fan tacho inputs are provided, the ADM9240 gates an internal 22.5kHz +clock via a divider to an 8-bit counter. Fan speed (rpm) is calculated by: + +rpm = (22500 * 60) / (count * divider) + +Automatic fan clock divider + + * User sets 0 to fan_min limit + - low speed alarm is disabled + - fan clock divider not changed + - auto fan clock adjuster enabled for valid fan speed reading + + * User sets fan_min limit too low + - low speed alarm is enabled + - fan clock divider set to max + - fan_min set to register value 254 which corresponds + to 664 rpm on adm9240 + - low speed alarm will be asserted if fan speed is + less than minimum measurable speed + - auto fan clock adjuster disabled + + * User sets reasonable fan speed + - low speed alarm is enabled + - fan clock divider set to suit fan_min + - auto fan clock adjuster enabled: adjusts fan_min + + * User sets unreasonably high low fan speed limit + - resolution of the low speed limit may be reduced + - alarm will be asserted + - auto fan clock adjuster enabled: adjusts fan_min + + * fan speed may be displayed as zero until the auto fan clock divider + adjuster brings fan speed clock divider back into chip measurement + range, this will occur within a few measurement cycles. + +Analog Output +------------- +An analog output provides a 0 to 1.25 volt signal intended for an external +fan speed amplifier circuit. The analog output is set to maximum value on +power up or reset. This doesn't do much on the test Intel SE440BX-2. + +Voltage Monitor + +Voltage (IN) measurement is internally scaled: + + nr label nominal maximum resolution + mV mV mV + 0 +2.5V 2500 3320 13.0 + 1 Vccp1 2700 3600 14.1 + 2 +3.3V 3300 4380 17.2 + 3 +5V 5000 6640 26.0 + 4 +12V 12000 15940 62.5 + 5 Vccp2 2700 3600 14.1 + +The reading is an unsigned 8-bit value, nominal voltage measurement is +represented by a reading of 192, being 3/4 of the measurement range. + +An alarm is asserted for any voltage going below or above the set limits. + +The driver reports and accepts voltage limits scaled to the above table. + +VID Monitor +----------- +The chip has five inputs to read the 5-bit VID and reports the mV value +based on detected CPU type. + +Chassis Intrusion +----------------- +An alarm is asserted when the CI pin goes active high. The ADM9240 +Datasheet has an example of an external temperature sensor driving +this pin. On an Intel SE440BX-2 the Chassis Intrusion header is +connected to a normally open switch. + +The ADM9240 provides an internal open drain on this line, and may output +a 20 ms active low pulse to reset an external Chassis Intrusion latch. + +Clear the CI latch by writing value 1 to the sysfs chassis_clear file. + +Alarm flags reported as 16-bit word + + bit label comment + --- ------------- -------------------------- + 0 +2.5 V_Error high or low limit exceeded + 1 VCCP_Error high or low limit exceeded + 2 +3.3 V_Error high or low limit exceeded + 3 +5 V_Error high or low limit exceeded + 4 Temp_Error temperature error + 6 FAN1_Error fan low limit exceeded + 7 FAN2_Error fan low limit exceeded + 8 +12 V_Error high or low limit exceeded + 9 VCCP2_Error high or low limit exceeded + 12 Chassis_Error CI pin went high + +Remaining bits are reserved and thus undefined. It is important to note +that alarm bits may be cleared on read, user-space may latch alarms and +provide the end-user with a method to clear alarm memory. ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: pcf8574 driver cleanup 2005-06-22 5:17 ` [PATCH] I2C: add adm9240 driver documentation Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: lm83 uses new sysfs callbacks Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: pcf8574 driver cleanup I found a possible cleanup in the pcf8574 driver. We don't need to store the read value in our private data structure, as we then never use it again. I asked Aurelien and he is fine with the change. Please apply, thanks. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit eb071cbbc38efa4b1d707f540de2ec6283ab0894 tree dd9037caf6acb546abe76f76d60987b8d870a1e4 parent 5d740fe9fefda41292b5cabe70f4f8eff9f8aad0 author Jean Delvare <khali@linux-fr.org> Sat, 04 Jun 2005 13:17:43 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:03 -0700 drivers/i2c/chips/pcf8574.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -57,7 +57,7 @@ SENSORS_INSMOD_2(pcf8574, pcf8574a); struct pcf8574_data { struct i2c_client client; - u8 read, write; /* Register values */ + u8 write; /* Remember last written value */ }; static int pcf8574_attach_adapter(struct i2c_adapter *adapter); @@ -79,9 +79,7 @@ static struct i2c_driver pcf8574_driver static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); - struct pcf8574_data *data = i2c_get_clientdata(client); - data->read = i2c_smbus_read_byte(client); - return sprintf(buf, "%u\n", data->read); + return sprintf(buf, "%u\n", i2c_smbus_read_byte(client)); } static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: lm83 uses new sysfs callbacks 2005-06-22 5:17 ` [PATCH] I2C: pcf8574 driver cleanup Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: drivers/i2c/chips/it87.c: use dynamic " Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: lm83 uses new sysfs callbacks I updated the lm83 hardware monitoring driver to take benefit of Yani Ioannou's new sysfs callback capabilities. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 1a86c05121a3f56b4b928ed43f9f8ffc1376d802 tree 5ae73589d53ccadec32b90305988828f530efc04 parent 30d7394b1a3df0e7cc145a543846109babd4d53b author Jean Delvare <khali@linux-fr.org> Sun, 05 Jun 2005 21:16:39 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:04 -0700 drivers/i2c/chips/lm83.c | 157 +++++++++++++++++++++++----------------------- 1 files changed, 77 insertions(+), 80 deletions(-) diff --git a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c --- a/drivers/i2c/chips/lm83.c +++ b/drivers/i2c/chips/lm83.c @@ -1,7 +1,7 @@ /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org> * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four @@ -33,6 +33,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> +#include <linux/i2c-sysfs.h> /* * Addresses to scan @@ -93,21 +94,20 @@ static const u8 LM83_REG_R_TEMP[] = { LM83_REG_R_LOCAL_TEMP, LM83_REG_R_REMOTE1_TEMP, LM83_REG_R_REMOTE2_TEMP, - LM83_REG_R_REMOTE3_TEMP -}; - -static const u8 LM83_REG_R_HIGH[] = { + LM83_REG_R_REMOTE3_TEMP, LM83_REG_R_LOCAL_HIGH, LM83_REG_R_REMOTE1_HIGH, LM83_REG_R_REMOTE2_HIGH, - LM83_REG_R_REMOTE3_HIGH + LM83_REG_R_REMOTE3_HIGH, + LM83_REG_R_TCRIT, }; static const u8 LM83_REG_W_HIGH[] = { LM83_REG_W_LOCAL_HIGH, LM83_REG_W_REMOTE1_HIGH, LM83_REG_W_REMOTE2_HIGH, - LM83_REG_W_REMOTE3_HIGH + LM83_REG_W_REMOTE3_HIGH, + LM83_REG_W_TCRIT, }; /* @@ -143,9 +143,9 @@ struct lm83_data { unsigned long last_updated; /* in jiffies */ /* registers values */ - s8 temp_input[4]; - s8 temp_high[4]; - s8 temp_crit; + s8 temp[9]; /* 0..3: input 1-4, + 4..7: high limit 1-4, + 8 : critical limit */ u16 alarms; /* bitvector, combined */ }; @@ -153,65 +153,55 @@ struct lm83_data { * Sysfs stuff */ -#define show_temp(suffix, value) \ -static ssize_t show_temp_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm83_data *data = lm83_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm83_data *data = lm83_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); } -show_temp(input1, temp_input[0]); -show_temp(input2, temp_input[1]); -show_temp(input3, temp_input[2]); -show_temp(input4, temp_input[3]); -show_temp(high1, temp_high[0]); -show_temp(high2, temp_high[1]); -show_temp(high3, temp_high[2]); -show_temp(high4, temp_high[3]); -show_temp(crit, temp_crit); - -#define set_temp(suffix, value, reg) \ -static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm83_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(val); \ - i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ + +static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct lm83_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + int nr = attr->index; + + down(&data->update_lock); + data->temp[nr] = TEMP_TO_REG(val); + i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4], + data->temp[nr]); + up(&data->update_lock); + return count; } -set_temp(high1, temp_high[0], LM83_REG_W_LOCAL_HIGH); -set_temp(high2, temp_high[1], LM83_REG_W_REMOTE1_HIGH); -set_temp(high3, temp_high[2], LM83_REG_W_REMOTE2_HIGH); -set_temp(high4, temp_high[3], LM83_REG_W_REMOTE3_HIGH); -set_temp(crit, temp_crit, LM83_REG_W_TCRIT); -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, + char *buf) { struct lm83_data *data = lm83_update_device(dev); return sprintf(buf, "%d\n", data->alarms); } -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); -static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); -static DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_input3, NULL); -static DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_input4, NULL); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_high1, - set_temp_high1); -static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, - set_temp_high2); -static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_high3, - set_temp_high3); -static DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_high4, - set_temp_high4); -static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL); -static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL); -static DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp_crit, - set_temp_crit); -static DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, + set_temp, 4); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp, + set_temp, 5); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp, + set_temp, 6); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp, + set_temp, 7); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 8); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8); +static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp, + set_temp, 8); +static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); /* @@ -322,18 +312,30 @@ static int lm83_detect(struct i2c_adapte */ /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp4_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp4_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); - device_create_file(&new_client->dev, &dev_attr_temp4_crit); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp3_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp4_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp3_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp4_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_crit.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp3_crit.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp4_crit.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); return 0; @@ -369,16 +371,11 @@ static struct lm83_data *lm83_update_dev int nr; dev_dbg(&client->dev, "Updating lm83 data.\n"); - for (nr = 0; nr < 4 ; nr++) { - data->temp_input[nr] = + for (nr = 0; nr < 9; nr++) { + data->temp[nr] = i2c_smbus_read_byte_data(client, LM83_REG_R_TEMP[nr]); - data->temp_high[nr] = - i2c_smbus_read_byte_data(client, - LM83_REG_R_HIGH[nr]); } - data->temp_crit = - i2c_smbus_read_byte_data(client, LM83_REG_R_TCRIT); data->alarms = i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1) + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2) ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: drivers/i2c/chips/it87.c: use dynamic sysfs callbacks 2005-06-22 5:17 ` [PATCH] I2C: lm83 uses new sysfs callbacks Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: lm63 uses new " Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: drivers/i2c/chips/it87.c: use dynamic sysfs callbacks This patch modifies the it87 hardware monitoring driver to take benefit of the new sysfs callback features introduced by Yani Ioannou, making the code much clearer and the resulting driver significantly smaller. From: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 20ad93d4e5cf5f0616198b5919ee9f304119dd4b tree a2260af225b373435ceb4e9475dfbbe67f019832 parent bc51ae1159c0c9a34d2400a8449e1fca3ee965b4 author Jean Delvare <khali@linux-fr.org> Sun, 05 Jun 2005 11:53:25 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:04 -0700 drivers/i2c/chips/it87.c | 387 ++++++++++++++++++++++------------------------ 1 files changed, 183 insertions(+), 204 deletions(-) diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c --- a/drivers/i2c/chips/it87.c +++ b/drivers/i2c/chips/it87.c @@ -37,6 +37,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> +#include <linux/i2c-sysfs.h> #include <linux/i2c-vid.h> #include <asm/io.h> @@ -238,27 +239,42 @@ static struct i2c_driver it87_driver = { .detach_client = it87_detach_client, }; -static ssize_t show_in(struct device *dev, char *buf, int nr) +static ssize_t show_in(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); } -static ssize_t show_in_min(struct device *dev, char *buf, int nr) +static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); } -static ssize_t show_in_max(struct device *dev, char *buf, int nr) +static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); } -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); @@ -270,9 +286,12 @@ static ssize_t set_in_min(struct device up(&data->update_lock); return count; } -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); @@ -286,38 +305,14 @@ static ssize_t set_in_max(struct device } #define show_in_offset(offset) \ -static ssize_t \ - show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in, NULL, offset); #define limit_in_offset(offset) \ -static ssize_t \ - show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); +static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in_min, set_in_min, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in_max, set_in_max, offset); show_in_offset(0); limit_in_offset(0); @@ -338,24 +333,39 @@ limit_in_offset(7); show_in_offset(8); /* 3 temperatures */ -static ssize_t show_temp(struct device *dev, char *buf, int nr) +static ssize_t show_temp(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); } -static ssize_t show_temp_max(struct device *dev, char *buf, int nr) +static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); } -static ssize_t show_temp_min(struct device *dev, char *buf, int nr) +static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])); } -static ssize_t set_temp_max(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -366,9 +376,12 @@ static ssize_t set_temp_max(struct devic up(&data->update_lock); return count; } -static ssize_t set_temp_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -380,42 +393,23 @@ static ssize_t set_temp_min(struct devic return count; } #define show_temp_offset(offset) \ -static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset - 1); \ -} \ -static ssize_t \ -show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t \ -show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_max(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL); \ -static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_max, set_temp_##offset##_max); \ -static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_min, set_temp_##offset##_min); +static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_max, set_temp_max, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_min, set_temp_min, offset - 1); show_temp_offset(1); show_temp_offset(2); show_temp_offset(3); -static ssize_t show_sensor(struct device *dev, char *buf, int nr) +static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); u8 reg = data->sensor; /* In case the value is updated while we use it */ @@ -425,9 +419,12 @@ static ssize_t show_sensor(struct device return sprintf(buf, "2\n"); /* thermistor */ return sprintf(buf, "0\n"); /* disabled */ } -static ssize_t set_sensor(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -450,53 +447,67 @@ static ssize_t set_sensor(struct device return count; } #define show_sensor_offset(offset) \ -static ssize_t show_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_sensor(dev, buf, offset - 1); \ -} \ -static ssize_t set_sensor_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_sensor(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ - show_sensor_##offset, set_sensor_##offset); +static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ + show_sensor, set_sensor, offset - 1); show_sensor_offset(1); show_sensor_offset(2); show_sensor_offset(3); /* 3 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) +static ssize_t show_fan(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); } -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); } -static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) +static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); } -static ssize_t show_pwm(struct device *dev, char *buf, int nr) +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct it87_data *data = it87_update_device(dev); return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); } -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -507,9 +518,12 @@ static ssize_t set_fan_min(struct device up(&data->update_lock); return count; } -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -547,9 +561,12 @@ static ssize_t set_fan_div(struct device up(&data->update_lock); return count; } -static ssize_t set_pwm_enable(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_pwm_enable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -578,9 +595,12 @@ static ssize_t set_pwm_enable(struct dev up(&data->update_lock); return count; } -static ssize_t set_pwm(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); + int nr = sensor_attr->index; + struct i2c_client *client = to_i2c_client(dev); struct it87_data *data = i2c_get_clientdata(client); int val = simple_strtol(buf, NULL, 10); @@ -596,64 +616,23 @@ static ssize_t set_pwm(struct device *de return count; } -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_div(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_div, set_fan_##offset##_div); +#define show_fan_offset(offset) \ +static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, set_fan_min, offset - 1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan_div, set_fan_div, offset - 1); show_fan_offset(1); show_fan_offset(2); show_fan_offset(3); #define show_pwm_offset(offset) \ -static ssize_t show_pwm##offset##_enable (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_enable(dev, buf, offset - 1); \ -} \ -static ssize_t show_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_enable (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_enable(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_enable, \ - set_pwm##offset##_enable); \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm##offset , set_pwm##offset ); +static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + show_pwm_enable, set_pwm_enable, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm, set_pwm, offset - 1); show_pwm_offset(1); show_pwm_offset(2); @@ -861,60 +840,60 @@ int it87_detect(struct i2c_adapter *adap it87_init_client(new_client, data); /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in7_input); - device_create_file(&new_client->dev, &dev_attr_in8_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in7_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_in7_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp1_type); - device_create_file(&new_client->dev, &dev_attr_temp2_type); - device_create_file(&new_client->dev, &dev_attr_temp3_type); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan3_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan3_div); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); if (enable_pwm_interface) { - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - device_create_file(&new_client->dev, &dev_attr_pwm3_enable); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm3); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm2_enable.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm3_enable.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr); + device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr); } if (data->type == it8712) { ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: lm63 uses new sysfs callbacks 2005-06-22 5:17 ` [PATCH] I2C: drivers/i2c/chips/it87.c: use dynamic " Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: rename i2c-sysfs.h to hwmon-sysfs.h Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: lm63 uses new sysfs callbacks I updated the lm63 hardware monitoring driver to take benefit of Yani Ioannou's new sysfs callback capabilities. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit bc51ae1159c0c9a34d2400a8449e1fca3ee965b4 tree a7bef5ee693b9b35a34ccf8361caab7578254c30 parent 1a86c05121a3f56b4b928ed43f9f8ffc1376d802 author Jean Delvare <khali@linux-fr.org> Sun, 05 Jun 2005 20:32:27 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:04 -0700 drivers/i2c/chips/lm63.c | 267 ++++++++++++++++++++++++---------------------- 1 files changed, 142 insertions(+), 125 deletions(-) diff --git a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c --- a/drivers/i2c/chips/lm63.c +++ b/drivers/i2c/chips/lm63.c @@ -1,7 +1,7 @@ /* * lm63.c - driver for the National Semiconductor LM63 temperature sensor * with integrated fan control - * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org> * Based on the lm90 driver. * * The LM63 is a sensor chip made by National Semiconductor. It measures @@ -43,6 +43,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> +#include <linux/i2c-sysfs.h> /* * Addresses to scan @@ -157,16 +158,16 @@ struct lm63_data { /* registers values */ u8 config, config_fan; - u16 fan1_input; - u16 fan1_low; + u16 fan[2]; /* 0: input + 1: low limit */ u8 pwm1_freq; u8 pwm1_value; - s8 temp1_input; - s8 temp1_high; - s16 temp2_input; - s16 temp2_high; - s16 temp2_low; - s8 temp2_crit; + s8 temp8[3]; /* 0: local input + 1: local high limit + 2: remote critical limit */ + s16 temp11[3]; /* 0: remote input + 1: remote low limit + 2: remote high limit */ u8 temp2_crit_hyst; u8 alarms; }; @@ -175,33 +176,33 @@ struct lm63_data { * Sysfs callback functions and files */ -#define show_fan(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm63_data *data = lm63_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->value)); \ +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); } -show_fan(fan1_input); -show_fan(fan1_low); -static ssize_t set_fan1_low(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); down(&data->update_lock); - data->fan1_low = FAN_TO_REG(val); + data->fan[1] = FAN_TO_REG(val); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, - data->fan1_low & 0xFF); + data->fan[1] & 0xFF); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, - data->fan1_low >> 8); + data->fan[1] >> 8); up(&data->update_lock); return count; } -static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy, + char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? @@ -209,7 +210,8 @@ static ssize_t show_pwm1(struct device * (2 * data->pwm1_freq)); } -static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); @@ -228,77 +230,83 @@ static ssize_t set_pwm1(struct device *d return count; } -static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, + char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); } -#define show_temp8(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm63_data *data = lm63_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->value)); \ -} -#define show_temp11(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm63_data *data = lm63_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->value)); \ -} -show_temp8(temp1_input); -show_temp8(temp1_high); -show_temp11(temp2_input); -show_temp11(temp2_high); -show_temp11(temp2_low); -show_temp8(temp2_crit); - -#define set_temp8(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm63_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP8_TO_REG(val); \ - i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -#define set_temp11(value, reg_msb, reg_lsb) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm63_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP11_TO_REG(val); \ - i2c_smbus_write_byte_data(client, reg_msb, data->value >> 8); \ - i2c_smbus_write_byte_data(client, reg_lsb, data->value & 0xff); \ - up(&data->update_lock); \ - return count; \ -} -set_temp8(temp1_high, LM63_REG_LOCAL_HIGH); -set_temp11(temp2_high, LM63_REG_REMOTE_HIGH_MSB, LM63_REG_REMOTE_HIGH_LSB); -set_temp11(temp2_low, LM63_REG_REMOTE_LOW_MSB, LM63_REG_REMOTE_LOW_LSB); +static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); +} + +static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp8[1] = TEMP8_TO_REG(val); + i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); + up(&data->update_lock); + return count; +} + +static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])); +} + +static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + static const u8 reg[4] = { + LM63_REG_REMOTE_LOW_MSB, + LM63_REG_REMOTE_LOW_LSB, + LM63_REG_REMOTE_HIGH_MSB, + LM63_REG_REMOTE_HIGH_LSB, + }; + + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct lm63_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + int nr = attr->index; + + down(&data->update_lock); + data->temp11[nr] = TEMP11_TO_REG(val); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], + data->temp11[nr] >> 8); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], + data->temp11[nr] & 0xff); + up(&data->update_lock); + return count; +} /* Hysteresis register holds a relative value, while we want to present an absolute to user-space */ -static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, + char *buf) { struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp2_crit) + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2]) - TEMP8_FROM_REG(data->temp2_crit_hyst)); } /* And now the other way around, user-space provides an absolute hysteresis value and we have to store a relative one */ -static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) +static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct lm63_data *data = i2c_get_clientdata(client); @@ -306,36 +314,37 @@ static ssize_t set_temp2_crit_hyst(struc long hyst; down(&data->update_lock); - hyst = TEMP8_FROM_REG(data->temp2_crit) - val; + hyst = TEMP8_FROM_REG(data->temp8[2]) - val; i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, HYST_TO_REG(hyst)); up(&data->update_lock); return count; } -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, + char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%u\n", data->alarms); } -static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan1_input, NULL); -static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan1_low, - set_fan1_low); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, + set_fan, 1); static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_high, - set_temp1_high); - -static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp2_input, NULL); -static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp2_low, - set_temp2_low); -static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp2_high, - set_temp2_high); -static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp2_crit, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 1); + +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 1); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 2); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, set_temp2_crit_hyst); @@ -429,17 +438,25 @@ static int lm63_detect(struct i2c_adapte /* Register sysfs hooks */ if (data->config & 0x04) { /* tachometer enabled */ - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_min.dev_attr); } device_create_file(&new_client->dev, &dev_attr_pwm1); device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp2_crit.dev_attr); device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); device_create_file(&new_client->dev, &dev_attr_alarms); @@ -510,14 +527,14 @@ static struct lm63_data *lm63_update_dev if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { if (data->config & 0x04) { /* tachometer enabled */ /* order matters for fan1_input */ - data->fan1_input = i2c_smbus_read_byte_data(client, - LM63_REG_TACH_COUNT_LSB) & 0xFC; - data->fan1_input |= i2c_smbus_read_byte_data(client, - LM63_REG_TACH_COUNT_MSB) << 8; - data->fan1_low = (i2c_smbus_read_byte_data(client, - LM63_REG_TACH_LIMIT_LSB) & 0xFC) - | (i2c_smbus_read_byte_data(client, - LM63_REG_TACH_LIMIT_MSB) << 8); + data->fan[0] = i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_LSB) & 0xFC; + data->fan[0] |= i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_MSB) << 8; + data->fan[1] = (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_LSB) & 0xFC) + | (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_MSB) << 8); } data->pwm1_freq = i2c_smbus_read_byte_data(client, @@ -527,26 +544,26 @@ static struct lm63_data *lm63_update_dev data->pwm1_value = i2c_smbus_read_byte_data(client, LM63_REG_PWM_VALUE); - data->temp1_input = i2c_smbus_read_byte_data(client, - LM63_REG_LOCAL_TEMP); - data->temp1_high = i2c_smbus_read_byte_data(client, - LM63_REG_LOCAL_HIGH); + data->temp8[0] = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_TEMP); + data->temp8[1] = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_HIGH); /* order matters for temp2_input */ - data->temp2_input = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TEMP_MSB) << 8; - data->temp2_input |= i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TEMP_LSB); - data->temp2_high = (i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_HIGH_MSB) << 8) - | i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_HIGH_LSB); - data->temp2_low = (i2c_smbus_read_byte_data(client, + data->temp11[0] = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_MSB) << 8; + data->temp11[0] |= i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_LSB); + data->temp11[1] = (i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_LOW_MSB) << 8) | i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_LOW_LSB); - data->temp2_crit = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TCRIT); + data->temp11[2] = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_LSB); + data->temp8[2] = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT); data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST); ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: rename i2c-sysfs.h to hwmon-sysfs.h 2005-06-22 5:17 ` [PATCH] I2C: lm63 uses new " Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: add new pca9539 driver Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: rename i2c-sysfs.h to hwmon-sysfs.h This patch renames the new linux/i2c-sysfs.h header file to linux/hwmon-sysfs.h. This names seems to be more appropriate since this file defines macros and structures not related to i2c but to hardware monitoring drivers. The patch also updates the five hardware monitoring driver which include that header file already. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 10c08f8100ee2c4d27b862635574cdf4ef439e67 tree 7055414032c3fd5fa066c6574804011132b69cb5 parent c3bc4caedd84ad03360cb9ec04b6c44ab314588b author Jean Delvare <khali@linux-fr.org> Mon, 06 Jun 2005 19:34:45 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:05 -0700 drivers/i2c/chips/adm1026.c | 2 +- drivers/i2c/chips/it87.c | 2 +- drivers/i2c/chips/lm63.c | 2 +- drivers/i2c/chips/lm83.c | 2 +- drivers/i2c/chips/lm90.c | 2 +- include/linux/hwmon-sysfs.h | 36 ++++++++++++++++++++++++++++++++++++ include/linux/i2c-sysfs.h | 36 ------------------------------------ 7 files changed, 41 insertions(+), 41 deletions(-) diff --git a/drivers/i2c/chips/adm1026.c b/drivers/i2c/chips/adm1026.c --- a/drivers/i2c/chips/adm1026.c +++ b/drivers/i2c/chips/adm1026.c @@ -29,8 +29,8 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> -#include <linux/i2c-sysfs.h> #include <linux/i2c-vid.h> +#include <linux/hwmon-sysfs.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c --- a/drivers/i2c/chips/it87.c +++ b/drivers/i2c/chips/it87.c @@ -37,8 +37,8 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> -#include <linux/i2c-sysfs.h> #include <linux/i2c-vid.h> +#include <linux/hwmon-sysfs.h> #include <asm/io.h> diff --git a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c --- a/drivers/i2c/chips/lm63.c +++ b/drivers/i2c/chips/lm63.c @@ -43,7 +43,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> -#include <linux/i2c-sysfs.h> +#include <linux/hwmon-sysfs.h> /* * Addresses to scan diff --git a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c --- a/drivers/i2c/chips/lm83.c +++ b/drivers/i2c/chips/lm83.c @@ -33,7 +33,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> -#include <linux/i2c-sysfs.h> +#include <linux/hwmon-sysfs.h> /* * Addresses to scan diff --git a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c --- a/drivers/i2c/chips/lm90.c +++ b/drivers/i2c/chips/lm90.c @@ -76,7 +76,7 @@ #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/i2c-sensor.h> -#include <linux/i2c-sysfs.h> +#include <linux/hwmon-sysfs.h> /* * Addresses to scan diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h new file mode 100644 --- /dev/null +++ b/include/linux/hwmon-sysfs.h @@ -0,0 +1,36 @@ +/* + * hwmon-sysfs.h - hardware monitoring chip driver sysfs defines + * + * Copyright (C) 2005 Yani Ioannou <yani.ioannou@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef _LINUX_HWMON_SYSFS_H +#define _LINUX_HWMON_SYSFS_H + +struct sensor_device_attribute{ + struct device_attribute dev_attr; + int index; +}; +#define to_sensor_dev_attr(_dev_attr) \ + container_of(_dev_attr, struct sensor_device_attribute, dev_attr) + +#define SENSOR_DEVICE_ATTR(_name,_mode,_show,_store,_index) \ +struct sensor_device_attribute sensor_dev_attr_##_name = { \ + .dev_attr = __ATTR(_name,_mode,_show,_store), \ + .index = _index, \ +} + +#endif /* _LINUX_HWMON_SYSFS_H */ diff --git a/include/linux/i2c-sysfs.h b/include/linux/i2c-sysfs.h deleted file mode 100644 --- a/include/linux/i2c-sysfs.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * i2c-sysfs.h - i2c chip driver sysfs defines - * - * Copyright (C) 2005 Yani Ioannou <yani.ioannou@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef _LINUX_I2C_SYSFS_H -#define _LINUX_I2C_SYSFS_H - -struct sensor_device_attribute{ - struct device_attribute dev_attr; - int index; -}; -#define to_sensor_dev_attr(_dev_attr) \ - container_of(_dev_attr, struct sensor_device_attribute, dev_attr) - -#define SENSOR_DEVICE_ATTR(_name,_mode,_show,_store,_index) \ -struct sensor_device_attribute sensor_dev_attr_##_name = { \ - .dev_attr = __ATTR(_name,_mode,_show,_store), \ - .index = _index, \ -} - -#endif /* _LINUX_I2C_SYSFS_H */ ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: add new pca9539 driver 2005-06-22 5:17 ` [PATCH] I2C: rename i2c-sysfs.h to hwmon-sysfs.h Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] max6875: new i2c device driver Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: bgardner [PATCH] I2C: add new pca9539 driver This is an i2c driver for the Philips PCA9539 (16 bit I/O port). It uses the new i2c-sysfs interfaces. The patch includes documentation. It depends on the patch that renames "i2c-sysfs.h" to "hwmon-sysfs.h" Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 69dd204b6b45987dbf9ce7058cd238d355865281 tree e033f9697109d4a411e5c6707b0e6991e00ede7f parent 10c08f8100ee2c4d27b862635574cdf4ef439e67 author bgardner@wabtec.com <bgardner@wabtec.com> Tue, 07 Jun 2005 08:55:38 -0500 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:05 -0700 Documentation/i2c/chips/pca9539 | 47 ++++++++++ drivers/i2c/chips/Kconfig | 10 ++ drivers/i2c/chips/Makefile | 1 drivers/i2c/chips/pca9539.c | 192 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 250 insertions(+), 0 deletions(-) diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539 new file mode 100644 --- /dev/null +++ b/Documentation/i2c/chips/pca9539 @@ -0,0 +1,47 @@ +Kernel driver pca9539 +===================== + +Supported chips: + * Philips PCA9539 + Prefix: 'pca9539' + Addresses scanned: 0x74 - 0x77 + Datasheet: + http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf + +Author: Ben Gardner <bgardner@wabtec.com> + + +Description +----------- + +The Philips PCA9539 is a 16 bit low power I/O device. +All 16 lines can be individually configured as an input or output. +The input sense can also be inverted. +The 16 lines are split between two bytes. + + +Sysfs entries +------------- + +Each is a byte that maps to the 8 I/O bits. +A '0' suffix is for bits 0-7, while '1' is for bits 8-15. + +input[01] - read the current value +output[01] - sets the output value +direction[01] - direction of each bit: 1=input, 0=output +invert[01] - toggle the input bit sense + +input reads the actual state of the line and is always available. +The direction defaults to input for all channels. + + +General Remarks +--------------- + +Note that each output, direction, and invert entry controls 8 lines. +You should use the read, modify, write sequence. +For example. to set output bit 0 of 1. + val=$(cat output0) + val=$(( $val | 1 )) + echo $val > output0 + diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -440,6 +440,16 @@ config SENSORS_PCF8574 This driver can also be built as a module. If so, the module will be called pcf8574. +config SENSORS_PCA9539 + tristate "Philips PCA9539 16-bit I/O port" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Philips PCA9539 + 16-bit I/O port. + + This driver can also be built as a module. If so, the module + will be called pca9539. + config SENSORS_PCF8591 tristate "Philips PCF8591" depends on I2C && EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SENSORS_MAX1619) += max1619 obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_M41T00) += m41t00.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o +obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c new file mode 100644 --- /dev/null +++ b/drivers/i2c/chips/pca9539.c @@ -0,0 +1,192 @@ +/* + pca9539.c - 16-bit I/O port with interrupt and reset + + Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon-sysfs.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END}; +static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END}; + +/* Insmod parameters */ +SENSORS_INSMOD_1(pca9539); + +enum pca9539_cmd +{ + PCA9539_INPUT_0 = 0, + PCA9539_INPUT_1 = 1, + PCA9539_OUTPUT_0 = 2, + PCA9539_OUTPUT_1 = 3, + PCA9539_INVERT_0 = 4, + PCA9539_INVERT_1 = 5, + PCA9539_DIRECTION_0 = 6, + PCA9539_DIRECTION_1 = 7, +}; + +static int pca9539_attach_adapter(struct i2c_adapter *adapter); +static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind); +static int pca9539_detach_client(struct i2c_client *client); + +/* This is the driver that will be inserted */ +static struct i2c_driver pca9539_driver = { + .owner = THIS_MODULE, + .name = "pca9539", + .flags = I2C_DF_NOTIFY, + .attach_adapter = pca9539_attach_adapter, + .detach_client = pca9539_detach_client, +}; + +struct pca9539_data { + struct i2c_client client; +}; + +/* following are the sysfs callback functions */ +static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *psa = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client, + psa->index)); +} + +static ssize_t pca9539_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *psa = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + unsigned long val = simple_strtoul(buf, NULL, 0); + if (val > 0xff) + return -EINVAL; + i2c_smbus_write_byte_data(client, psa->index, val); + return count; +} + +/* Define the device attributes */ + +#define PCA9539_ENTRY_RO(name, cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9539_show, NULL, cmd_idx) + +#define PCA9539_ENTRY_RW(name, cmd_idx) \ + static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9539_show, \ + pca9539_store, cmd_idx) + +PCA9539_ENTRY_RO(input0, PCA9539_INPUT_0); +PCA9539_ENTRY_RO(input1, PCA9539_INPUT_1); +PCA9539_ENTRY_RW(output0, PCA9539_OUTPUT_0); +PCA9539_ENTRY_RW(output1, PCA9539_OUTPUT_1); +PCA9539_ENTRY_RW(invert0, PCA9539_INVERT_0); +PCA9539_ENTRY_RW(invert1, PCA9539_INVERT_1); +PCA9539_ENTRY_RW(direction0, PCA9539_DIRECTION_0); +PCA9539_ENTRY_RW(direction1, PCA9539_DIRECTION_1); + +static struct attribute *pca9539_attributes[] = { + &sensor_dev_attr_input0.dev_attr.attr, + &sensor_dev_attr_input1.dev_attr.attr, + &sensor_dev_attr_output0.dev_attr.attr, + &sensor_dev_attr_output1.dev_attr.attr, + &sensor_dev_attr_invert0.dev_attr.attr, + &sensor_dev_attr_invert1.dev_attr.attr, + &sensor_dev_attr_direction0.dev_attr.attr, + &sensor_dev_attr_direction1.dev_attr.attr, + NULL +}; + +static struct attribute_group pca9539_defattr_group = { + .attrs = pca9539_attributes, +}; + +static int pca9539_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, pca9539_detect); +} + +/* This function is called by i2c_detect */ +static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct pca9539_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. */ + if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct pca9539_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &pca9539_driver; + new_client->flags = 0; + + /* Detection: the pca9539 only has 8 registers (0-7). + A read of 7 should succeed, but a read of 8 should fail. */ + if ((i2c_smbus_read_byte_data(new_client, 7) < 0) || + (i2c_smbus_read_byte_data(new_client, 8) >= 0)) + goto exit_kfree; + + strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_kfree; + + /* Register sysfs hooks (don't care about failure) */ + sysfs_create_group(&new_client->dev.kobj, &pca9539_defattr_group); + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int pca9539_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static int __init pca9539_init(void) +{ + return i2c_add_driver(&pca9539_driver); +} + +static void __exit pca9539_exit(void) +{ + i2c_del_driver(&pca9539_driver); +} + +MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); +MODULE_DESCRIPTION("PCA9539 driver"); +MODULE_LICENSE("GPL"); + +module_init(pca9539_init); +module_exit(pca9539_exit); + ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] max6875: new i2c device driver 2005-06-22 5:17 ` [PATCH] I2C: add new pca9539 driver Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: fix up ds1374.c driver so it will build Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: BGardner [PATCH] max6875: new i2c device driver This patch adds support for the MAX6875/MAX6874 chips. Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit c3bc4caedd84ad03360cb9ec04b6c44ab314588b tree 5ae34e8b136d2584be6d30f9203c7dba49f27663 parent 20ad93d4e5cf5f0616198b5919ee9f304119dd4b author BGardner@Wabtec.com <BGardner@Wabtec.com> Fri, 03 Jun 2005 13:03:27 -0400 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:05 -0700 Documentation/i2c/chips/max6875 | 54 ++++ drivers/i2c/chips/Kconfig | 12 + drivers/i2c/chips/Makefile | 1 drivers/i2c/chips/max6875.c | 473 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 540 insertions(+), 0 deletions(-) diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875 new file mode 100644 --- /dev/null +++ b/Documentation/i2c/chips/max6875 @@ -0,0 +1,54 @@ +Kernel driver max6875 +===================== + +Supported chips: + * Maxim max6874, max6875 + Prefixes: 'max6875' + Addresses scanned: 0x50, 0x52 + Datasheets: + http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf + +Author: Ben Gardner <bgardner@wabtec.com> + + +Module Parameters +----------------- + +* allow_write int + Set to non-zero to enable write permission: + *0: Read only + 1: Read and write + + +Description +----------- + +The MAXIM max6875 is a EEPROM-programmable power-supply sequencer/supervisor. +It provides timed outputs that can be used as a watchdog, if properly wired. +It also provides 512 bytes of user EEPROM. + +At reset, the max6875 reads the configuration eeprom into its configuration +registers. The chip then begins to operate according to the values in the +registers. + +See the datasheet for details on how to program the EEPROM. + + +Sysfs entries +------------- + +eeprom_user - 512 bytes of user-defined EEPROM space. Only writable if + allow_write was set and register 0x43 is 0. + +eeprom_config - 70 bytes of config EEPROM. Note that changes will not get + loaded into register space until a power cycle or device reset. + +reg_config - 70 bytes of register space. Any changes take affect immediately. + + +General Remarks +--------------- + +A typical application will require that the EEPROMs be programmed once and +never altered afterwards. + diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -498,4 +498,16 @@ config SENSORS_M41T00 This driver can also be built as a module. If so, the module will be called m41t00. +config SENSORS_MAX6875 + tristate "MAXIM MAX6875 Power supply supervisor" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the MAX6875 + EEPROM-Programmable, Hex/Quad, Power-Suppy Sequencers/Supervisors. + + This provides a interface to program the EEPROM and reset the chip. + + This driver can also be built as a module. If so, the module + will be called max6875. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_SENSORS_LM87) += lm87.o obj-$(CONFIG_SENSORS_LM90) += lm90.o obj-$(CONFIG_SENSORS_LM92) += lm92.o obj-$(CONFIG_SENSORS_MAX1619) += max1619.o +obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_M41T00) += m41t00.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c new file mode 100644 --- /dev/null +++ b/drivers/i2c/chips/max6875.c @@ -0,0 +1,473 @@ +/* + max6875.c - driver for MAX6874/MAX6875 + + Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> + + Based on i2c/chips/eeprom.c + + The MAX6875 has two EEPROM sections: config and user. + At reset, the config EEPROM is read into the registers. + + This driver make 3 binary files available in sysfs: + reg_config - direct access to the registers + eeprom_config - acesses configuration eeprom space + eeprom_user - free for application use + + In our application, we put device serial & model numbers in user eeprom. + + Notes: + 1) The datasheet says that register 0x44 / EEPROM 0x8044 should NOT + be overwritten, so the driver explicitly prevents that. + 2) It's a good idea to keep the config (0x45) locked in config EEPROM. + You can temporarily enable config writes by changing register 0x45. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> + +/* Addresses to scan */ +static unsigned short normal_i2c[] = {0x50, 0x52, I2C_CLIENT_END}; +static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END}; + +/* Insmod parameters */ +SENSORS_INSMOD_1(max6875); + +/* this param will prevent 'accidental' writes to the eeprom */ +static int allow_write = 0; +module_param(allow_write, int, 0); +MODULE_PARM_DESC(allow_write, + "Enable write access:\n" + "*0: Read only\n" + " 1: Read/Write access"); + +/* The MAX6875 can only read/write 16 bytes at a time */ +#define SLICE_SIZE 16 +#define SLICE_BITS 4 + +/* CONFIG EEPROM is at addresses 0x8000 - 0x8045, registers are at 0 - 0x45 */ +#define CONFIG_EEPROM_BASE 0x8000 +#define CONFIG_EEPROM_SIZE 0x0046 +#define CONFIG_EEPROM_SLICES 5 + +/* USER EEPROM is at addresses 0x8100 - 0x82FF */ +#define USER_EEPROM_BASE 0x8100 +#define USER_EEPROM_SIZE 0x0200 +#define USER_EEPROM_SLICES 32 + +/* MAX6875 commands */ +#define MAX6875_CMD_BLOCK_WRITE 0x83 +#define MAX6875_CMD_BLOCK_READ 0x84 +#define MAX6875_CMD_REBOOT 0x88 + +enum max6875_area_type { + max6875_register_config=0, + max6875_eeprom_config, + max6875_eeprom_user, + max6857_max +}; + +struct eeprom_block { + enum max6875_area_type type; + u8 slices; + u32 size; + u32 valid; + u32 base; + unsigned long *updated; + u8 *data; +}; + +/* Each client has this additional data */ +struct max6875_data { + struct i2c_client client; + struct semaphore update_lock; + struct eeprom_block blocks[max6857_max]; + /* the above structs point into the arrays below */ + u8 data[USER_EEPROM_SIZE + (CONFIG_EEPROM_SIZE*2)]; + unsigned long last_updated[USER_EEPROM_SLICES + (CONFIG_EEPROM_SLICES*2)]; +}; + +static int max6875_attach_adapter(struct i2c_adapter *adapter); +static int max6875_detect(struct i2c_adapter *adapter, int address, int kind); +static int max6875_detach_client(struct i2c_client *client); + +/* This is the driver that will be inserted */ +static struct i2c_driver max6875_driver = { + .owner = THIS_MODULE, + .name = "max6875", + .flags = I2C_DF_NOTIFY, + .attach_adapter = max6875_attach_adapter, + .detach_client = max6875_detach_client, +}; + +static int max6875_update_slice(struct i2c_client *client, + struct eeprom_block *blk, + int slice) +{ + struct max6875_data *data = i2c_get_clientdata(client); + int i, j, addr, count; + u8 rdbuf[SLICE_SIZE]; + int retval = 0; + + if (slice >= blk->slices) + return -1; + + down(&data->update_lock); + + if (!(blk->valid & (1 << slice)) || + (jiffies - blk->updated[slice] > 300 * HZ) || + (jiffies < blk->updated[slice])) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u, base %u\n", + slice, blk->base); + + addr = blk->base + (slice << SLICE_BITS); + count = blk->size - (slice << SLICE_BITS); + if (count > SLICE_SIZE) { + count = SLICE_SIZE; + } + + /* Preset the read address */ + if (addr < 0x100) { + /* select the register */ + if (i2c_smbus_write_byte(client, addr & 0xFF)) { + dev_dbg(&client->dev, "max6875 register select has failed!\n"); + retval = -1; + goto exit; + } + } else { + /* select the eeprom */ + if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) { + dev_dbg(&client->dev, "max6875 address set has failed!\n"); + retval = -1; + goto exit; + } + } + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + if (i2c_smbus_read_i2c_block_data(client, MAX6875_CMD_BLOCK_READ, + rdbuf) != SLICE_SIZE) + { + retval = -1; + goto exit; + } + + memcpy(&blk->data[slice << SLICE_BITS], rdbuf, count); + } else { + for (i = 0; i < count; i++) { + j = i2c_smbus_read_byte(client); + if (j < 0) + { + retval = -1; + goto exit; + } + blk->data[(slice << SLICE_BITS) + i] = (u8) j; + } + } + blk->updated[slice] = jiffies; + blk->valid |= (1 << slice); + } + exit: + up(&data->update_lock); + return retval; +} + +static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off, size_t count, + enum max6875_area_type area_type) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct max6875_data *data = i2c_get_clientdata(client); + struct eeprom_block *blk; + int slice; + + blk = &data->blocks[area_type]; + + if (off > blk->size) + return 0; + if (off + count > blk->size) + count = blk->size - off; + + /* Only refresh slices which contain requested bytes */ + for (slice = (off >> SLICE_BITS); slice <= ((off + count - 1) >> SLICE_BITS); slice++) + max6875_update_slice(client, blk, slice); + + memcpy(buf, &blk->data[off], count); + + return count; +} + +static ssize_t max6875_user_read(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + return max6875_read(kobj, buf, off, count, max6875_eeprom_user); +} + +static ssize_t max6875_config_read(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + return max6875_read(kobj, buf, off, count, max6875_eeprom_config); +} + +static ssize_t max6875_cfgreg_read(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + return max6875_read(kobj, buf, off, count, max6875_register_config); +} + + +static ssize_t max6875_write(struct kobject *kobj, char *buf, loff_t off, size_t count, + enum max6875_area_type area_type) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct max6875_data *data = i2c_get_clientdata(client); + struct eeprom_block *blk; + int slice, addr, retval; + ssize_t sent = 0; + + blk = &data->blocks[area_type]; + + if (off > blk->size) + return 0; + if ((off + count) > blk->size) + count = blk->size - off; + + if (down_interruptible(&data->update_lock)) + return -EAGAIN; + + /* writing to a register is done with i2c_smbus_write_byte_data() */ + if (blk->type == max6875_register_config) { + for (sent = 0; sent < count; sent++) { + addr = off + sent; + if (addr == 0x44) + continue; + + retval = i2c_smbus_write_byte_data(client, addr, buf[sent]); + } + } else { + int cmd, val; + + /* We are writing to EEPROM */ + for (sent = 0; sent < count; sent++) { + addr = blk->base + off + sent; + cmd = addr >> 8; + val = (addr & 0xff) | (buf[sent] << 8); // reversed + + if (addr == 0x8044) + continue; + + retval = i2c_smbus_write_word_data(client, cmd, val); + + if (retval) { + goto error_exit; + } + + /* A write takes up to 11 ms */ + msleep(11); + } + } + + /* Invalidate the scratch buffer */ + for (slice = (off >> SLICE_BITS); slice <= ((off + count - 1) >> SLICE_BITS); slice++) + blk->valid &= ~(1 << slice); + + error_exit: + up(&data->update_lock); + + return sent; +} + +static ssize_t max6875_user_write(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + return max6875_write(kobj, buf, off, count, max6875_eeprom_user); +} + +static ssize_t max6875_config_write(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + return max6875_write(kobj, buf, off, count, max6875_eeprom_config); +} + +static ssize_t max6875_cfgreg_write(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + return max6875_write(kobj, buf, off, count, max6875_register_config); +} + +static struct bin_attribute user_eeprom_attr = { + .attr = { + .name = "eeprom_user", + .mode = S_IRUGO | S_IWUSR | S_IWGRP, + .owner = THIS_MODULE, + }, + .size = USER_EEPROM_SIZE, + .read = max6875_user_read, + .write = max6875_user_write, +}; + +static struct bin_attribute config_eeprom_attr = { + .attr = { + .name = "eeprom_config", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = CONFIG_EEPROM_SIZE, + .read = max6875_config_read, + .write = max6875_config_write, +}; + +static struct bin_attribute config_register_attr = { + .attr = { + .name = "reg_config", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = CONFIG_EEPROM_SIZE, + .read = max6875_cfgreg_read, + .write = max6875_cfgreg_write, +}; + +static int max6875_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_detect(adapter, &addr_data, max6875_detect); +} + +/* This function is called by i2c_detect */ +static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct max6875_data *data; + int err = 0; + + /* There are three ways we can read the EEPROM data: + (1) I2C block reads (faster, but unsupported by most adapters) + (2) Consecutive byte reads (100% overhead) + (3) Regular byte data reads (200% overhead) + The third method is not implemented by this driver because all + known adapters support at least the second. */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + goto exit; + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access eeprom_{read,write}_value. */ + if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct max6875_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &max6875_driver; + new_client->flags = 0; + + /* Setup the user section */ + data->blocks[max6875_eeprom_user].type = max6875_eeprom_user; + data->blocks[max6875_eeprom_user].slices = USER_EEPROM_SLICES; + data->blocks[max6875_eeprom_user].size = USER_EEPROM_SIZE; + data->blocks[max6875_eeprom_user].base = USER_EEPROM_BASE; + data->blocks[max6875_eeprom_user].data = data->data; + data->blocks[max6875_eeprom_user].updated = data->last_updated; + + /* Setup the config section */ + data->blocks[max6875_eeprom_config].type = max6875_eeprom_config; + data->blocks[max6875_eeprom_config].slices = CONFIG_EEPROM_SLICES; + data->blocks[max6875_eeprom_config].size = CONFIG_EEPROM_SIZE; + data->blocks[max6875_eeprom_config].base = CONFIG_EEPROM_BASE; + data->blocks[max6875_eeprom_config].data = &data->data[USER_EEPROM_SIZE]; + data->blocks[max6875_eeprom_config].updated = &data->last_updated[USER_EEPROM_SLICES]; + + /* Setup the register section */ + data->blocks[max6875_register_config].type = max6875_register_config; + data->blocks[max6875_register_config].slices = CONFIG_EEPROM_SLICES; + data->blocks[max6875_register_config].size = CONFIG_EEPROM_SIZE; + data->blocks[max6875_register_config].base = 0; + data->blocks[max6875_register_config].data = &data->data[USER_EEPROM_SIZE+CONFIG_EEPROM_SIZE]; + data->blocks[max6875_register_config].updated = &data->last_updated[USER_EEPROM_SLICES+CONFIG_EEPROM_SLICES]; + + /* Init the data */ + memset(data->data, 0xff, sizeof(data->data)); + + /* Fill in the remaining client fields */ + strlcpy(new_client->name, "max6875", I2C_NAME_SIZE); + init_MUTEX(&data->update_lock); + + /* Verify that the chip is really what we think it is */ + if ((max6875_update_slice(new_client, &data->blocks[max6875_eeprom_config], 4) < 0) || + (max6875_update_slice(new_client, &data->blocks[max6875_register_config], 4) < 0)) + goto exit_kfree; + + /* 0x41,0x42 must be zero and 0x40 must match in eeprom and registers */ + if ((data->blocks[max6875_eeprom_config].data[0x41] != 0) || + (data->blocks[max6875_eeprom_config].data[0x42] != 0) || + (data->blocks[max6875_register_config].data[0x41] != 0) || + (data->blocks[max6875_register_config].data[0x42] != 0) || + (data->blocks[max6875_eeprom_config].data[0x40] != + data->blocks[max6875_register_config].data[0x40])) + goto exit_kfree; + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_kfree; + + /* create the sysfs eeprom files with the correct permissions */ + if (allow_write == 0) { + user_eeprom_attr.attr.mode &= ~S_IWUGO; + user_eeprom_attr.write = NULL; + config_eeprom_attr.attr.mode &= ~S_IWUGO; + config_eeprom_attr.write = NULL; + config_register_attr.attr.mode &= ~S_IWUGO; + config_register_attr.write = NULL; + } + sysfs_create_bin_file(&new_client->dev.kobj, &user_eeprom_attr); + sysfs_create_bin_file(&new_client->dev.kobj, &config_eeprom_attr); + sysfs_create_bin_file(&new_client->dev.kobj, &config_register_attr); + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int max6875_detach_client(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) { + dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static int __init max6875_init(void) +{ + return i2c_add_driver(&max6875_driver); +} + +static void __exit max6875_exit(void) +{ + i2c_del_driver(&max6875_driver); +} + + +MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); +MODULE_DESCRIPTION("MAX6875 driver"); +MODULE_LICENSE("GPL"); + +module_init(max6875_init); +module_exit(max6875_exit); ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: fix up ds1374.c driver so it will build. 2005-06-22 5:17 ` [PATCH] max6875: new i2c device driver Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2) Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: gregkh [PATCH] I2C: fix up ds1374.c driver so it will build. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit a45cfe2cd7450e56b4f44802b34faaf2a78a6cdb tree ca6f26f57cb96ff6ab4b9f1830f3f29f1185166d parent bdca3f0aedde85552099aa95ab1449bf81e4f6f5 author Greg KH <gregkh@suse.de> Thu, 09 Jun 2005 17:39:09 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:06 -0700 drivers/i2c/chips/ds1374.c | 4 ---- 1 files changed, 0 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -27,7 +27,6 @@ #include <linux/rtc.h> #include <linux/bcd.h> -#include <asm/time.h> #include <asm/rtc.h> #define DS1374_REG_TOD0 0x00 @@ -54,11 +53,8 @@ static unsigned short normal_addr[] = { static struct i2c_client_address_data addr_data = { .normal_i2c = normal_addr, - .normal_i2c_range = ignore, .probe = ignore, - .probe_range = ignore, .ignore = ignore, - .ignore_range = ignore, .force = ignore, }; ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2) 2005-06-22 5:17 ` [PATCH] I2C: fix up ds1374.c driver so it will build Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2) Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: rvinson [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2) This change provides support for the DS1374 Real-Time Clock chip present on the MPC8349ADS board. It depends on a previous patch which adds I2C support for the DS1374. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit bdca3f0aedde85552099aa95ab1449bf81e4f6f5 tree 1016146e6b110707163777101436eb5b339d39bc parent c124a78d8c7475ecc43f385f34112b638c4228d9 author Randy Vinson <rvinson@mvista.com> Fri, 03 Jun 2005 14:43:56 -0700 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:06 -0700 arch/ppc/platforms/83xx/mpc834x_sys.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -185,6 +185,26 @@ mpc834x_sys_init_IRQ(void) ipic_set_default_priority(); } +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init +mpc834x_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time)(); + do_settimeofday(&tv); + + return 0; +} +late_initcall(mpc834x_rtc_hookup); +#endif static __inline__ void mpc834x_sys_set_bat(void) { ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2) 2005-06-22 5:17 ` [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2) Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: w83781d: remove non-i2c sensor chips Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: rvinson [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2) Add support for Maxim/Dallas DS1374 Real-Time Clock Chip This change adds support for the Maxim/Dallas DS1374 RTC chip. This chip is an I2C-based RTC that maintains a simple 32-bit binary seconds count with battery backup support. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit c124a78d8c7475ecc43f385f34112b638c4228d9 tree 46de795c5e2da258a54501658f74e9619c271527 parent 69dd204b6b45987dbf9ce7058cd238d355865281 author Randy Vinson <rvinson@mvista.com> Fri, 03 Jun 2005 14:36:06 -0700 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:06 -0700 drivers/i2c/chips/Kconfig | 11 ++ drivers/i2c/chips/Makefile | 1 drivers/i2c/chips/ds1374.c | 266 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/i2c-id.h | 1 4 files changed, 279 insertions(+), 0 deletions(-) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -417,6 +417,17 @@ config SENSORS_DS1337 This driver can also be built as a module. If so, the module will be called ds1337. +config SENSORS_DS1374 + tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Dallas Semiconductor + DS1374 real-time clock chips. + + This driver can also be built as a module. If so, the module + will be called ds1374. + config SENSORS_EEPROM tristate "EEPROM reader" depends on I2C && EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SENSORS_ADM1031) += adm1031 obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_DS1337) += ds1337.o +obj-$(CONFIG_SENSORS_DS1374) += ds1374.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_FSCHER) += fscher.o diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c new file mode 100644 --- /dev/null +++ b/drivers/i2c/chips/ds1374.c @@ -0,0 +1,266 @@ +/* + * drivers/i2c/chips/ds1374.c + * + * I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock + * + * Author: Randy Vinson <rvinson@mvista.com> + * + * Based on the m41t00.c by Mark Greer <mgreer@mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +/* + * This i2c client/driver wedges between the drivers/char/genrtc.c RTC + * interface and the SMBus interface of the i2c subsystem. + * It would be more efficient to use i2c msgs/i2c_transfer directly but, as + * recommened in .../Documentation/i2c/writing-clients section + * "Sending and receiving", using SMBus level communication is preferred. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/rtc.h> +#include <linux/bcd.h> + +#include <asm/time.h> +#include <asm/rtc.h> + +#define DS1374_REG_TOD0 0x00 +#define DS1374_REG_TOD1 0x01 +#define DS1374_REG_TOD2 0x02 +#define DS1374_REG_TOD3 0x03 +#define DS1374_REG_WDALM0 0x04 +#define DS1374_REG_WDALM1 0x05 +#define DS1374_REG_WDALM2 0x06 +#define DS1374_REG_CR 0x07 +#define DS1374_REG_SR 0x08 +#define DS1374_REG_SR_OSF 0x80 +#define DS1374_REG_TCR 0x09 + +#define DS1374_DRV_NAME "ds1374" + +static DECLARE_MUTEX(ds1374_mutex); + +static struct i2c_driver ds1374_driver; +static struct i2c_client *save_client; + +static unsigned short ignore[] = { I2C_CLIENT_END }; +static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END }; + +static struct i2c_client_address_data addr_data = { + .normal_i2c = normal_addr, + .normal_i2c_range = ignore, + .probe = ignore, + .probe_range = ignore, + .ignore = ignore, + .ignore_range = ignore, + .force = ignore, +}; + +static ulong ds1374_read_rtc(void) +{ + ulong time = 0; + int reg = DS1374_REG_WDALM0; + + while (reg--) { + s32 tmp; + if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) { + dev_warn(&save_client->dev, + "can't read from rtc chip\n"); + return 0; + } + time = (time << 8) | (tmp & 0xff); + } + return time; +} + +static void ds1374_write_rtc(ulong time) +{ + int reg; + + for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) { + if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff) + < 0) { + dev_warn(&save_client->dev, + "can't write to rtc chip\n"); + break; + } + time = time >> 8; + } +} + +static void ds1374_check_rtc_status(void) +{ + s32 tmp; + + tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR); + if (tmp < 0) { + dev_warn(&save_client->dev, + "can't read status from rtc chip\n"); + return; + } + if (tmp & DS1374_REG_SR_OSF) { + dev_warn(&save_client->dev, + "oscillator discontinuity flagged, time unreliable\n"); + tmp &= ~DS1374_REG_SR_OSF; + tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR, + tmp & 0xff); + if (tmp < 0) + dev_warn(&save_client->dev, + "can't clear discontinuity notification\n"); + } +} + +ulong ds1374_get_rtc_time(void) +{ + ulong t1, t2; + int limit = 10; /* arbitrary retry limit */ + + down(&ds1374_mutex); + + /* + * Since the reads are being performed one byte at a time using + * the SMBus vs a 4-byte i2c transfer, there is a chance that a + * carry will occur during the read. To detect this, 2 reads are + * performed and compared. + */ + do { + t1 = ds1374_read_rtc(); + t2 = ds1374_read_rtc(); + } while (t1 != t2 && limit--); + + up(&ds1374_mutex); + + if (t1 != t2) { + dev_warn(&save_client->dev, + "can't get consistent time from rtc chip\n"); + t1 = 0; + } + + return t1; +} + +static void ds1374_set_tlet(ulong arg) +{ + ulong t1, t2; + int limit = 10; /* arbitrary retry limit */ + + t1 = *(ulong *) arg; + + down(&ds1374_mutex); + + /* + * Since the writes are being performed one byte at a time using + * the SMBus vs a 4-byte i2c transfer, there is a chance that a + * carry will occur during the write. To detect this, the write + * value is read back and compared. + */ + do { + ds1374_write_rtc(t1); + t2 = ds1374_read_rtc(); + } while (t1 != t2 && limit--); + + up(&ds1374_mutex); + + if (t1 != t2) + dev_warn(&save_client->dev, + "can't confirm time set from rtc chip\n"); +} + +ulong new_time; + +DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time); + +int ds1374_set_rtc_time(ulong nowtime) +{ + new_time = nowtime; + + if (in_interrupt()) + tasklet_schedule(&ds1374_tasklet); + else + ds1374_set_tlet((ulong) & new_time); + + return 0; +} + +/* + ***************************************************************************** + * + * Driver Interface + * + ***************************************************************************** + */ +static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct i2c_client *client; + int rc; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!client) + return -ENOMEM; + + memset(client, 0, sizeof(struct i2c_client)); + strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); + client->flags = I2C_DF_NOTIFY; + client->addr = addr; + client->adapter = adap; + client->driver = &ds1374_driver; + + if ((rc = i2c_attach_client(client)) != 0) { + kfree(client); + return rc; + } + + save_client = client; + + ds1374_check_rtc_status(); + + return 0; +} + +static int ds1374_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, ds1374_probe); +} + +static int ds1374_detach(struct i2c_client *client) +{ + int rc; + + if ((rc = i2c_detach_client(client)) == 0) { + kfree(i2c_get_clientdata(client)); + tasklet_kill(&ds1374_tasklet); + } + return rc; +} + +static struct i2c_driver ds1374_driver = { + .owner = THIS_MODULE, + .name = DS1374_DRV_NAME, + .id = I2C_DRIVERID_DS1374, + .flags = I2C_DF_NOTIFY, + .attach_adapter = ds1374_attach, + .detach_client = ds1374_detach, +}; + +static int __init ds1374_init(void) +{ + return i2c_add_driver(&ds1374_driver); +} + +static void __exit ds1374_exit(void) +{ + i2c_del_driver(&ds1374_driver); +} + +module_init(ds1374_init); +module_exit(ds1374_exit); + +MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>"); +MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -108,6 +108,7 @@ #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */ #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ #define I2C_DRIVERID_SAA7114H 64 /* video decoder */ +#define I2C_DRIVERID_DS1374 65 /* DS1374 real time clock */ #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */ ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: w83781d: remove non-i2c sensor chips 2005-06-22 5:17 ` [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2) Greg KH @ 2005-06-22 5:17 ` Greg KH 2005-06-22 5:17 ` [PATCH] I2C: fix ds1374 build Greg KH 0 siblings, 1 reply; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: khali [PATCH] I2C: w83781d: remove non-i2c sensor chips This patch removes the support for the W83697HF and W83627THF chips from the w83781d driver. These chips have no I2C/SMBus interface and are better supported by the Super-I/O-based w83627hf driver. Documentation was updated to reflect the support drop. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 7c7a530463ced6011789937b24dc2bfba43c706b tree 56082dfa7b18e6019c2bba32d013c945cfbf46aa parent a45cfe2cd7450e56b4f44802b34faaf2a78a6cdb author Jean Delvare <khali@linux-fr.org> Thu, 16 Jun 2005 19:24:14 +0200 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:52:07 -0700 Documentation/i2c/chips/w83781d | 16 ++------- drivers/i2c/chips/w83781d.c | 72 +++++++++++---------------------------- 2 files changed, 24 insertions(+), 64 deletions(-) diff --git a/Documentation/i2c/chips/w83781d b/Documentation/i2c/chips/w83781d --- a/Documentation/i2c/chips/w83781d +++ b/Documentation/i2c/chips/w83781d @@ -18,14 +18,6 @@ Supported chips: Prefix: 'w83627hf' Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports) Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf - * Winbond W83627THF - Prefix: 'w83627thf' - Addresses scanned: ISA address 0x290 (8 I/O ports) - Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf - * Winbond W83697HF - Prefix: 'w83697hf' - Addresses scanned: ISA 0x290 (8 I/O ports) - Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83697hf.pdf * Asus AS99127F Prefix: 'as99127f' Addresses scanned: I2C 0x28 - 0x2f @@ -53,9 +45,9 @@ force_subclients=bus,caddr,saddr,saddr Description ----------- -This driver implements support for the Winbond W83627HF, W83627THF, W83781D, -W83782D, W83783S, W83697HF chips, and the Asus AS99127F chips. We will refer -to them collectively as W8378* chips. +This driver implements support for the Winbond W83781D, W83782D, W83783S, +W83627HF chips, and the Asus AS99127F chips. We will refer to them +collectively as W8378* chips. There is quite some difference between these chips, but they are similar enough that it was sensible to put them together in one driver. @@ -67,10 +59,8 @@ as99127f 7 3 0 3 as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) -w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no -w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) Detection of these chips can sometimes be foiled because they can be in an internal state that allows no clean access. If you know the address diff --git a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c --- a/drivers/i2c/chips/w83781d.c +++ b/drivers/i2c/chips/w83781d.c @@ -28,10 +28,8 @@ as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) - w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC) w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no - w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) */ @@ -52,7 +50,7 @@ static unsigned short normal_i2c[] = { 0 static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; /* Insmod parameters */ -SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf); +SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); @@ -998,13 +996,6 @@ w83781d_detect(struct i2c_adapter *adapt err = -EINVAL; goto ERROR0; } - if (!is_isa && kind == w83697hf) { - dev_err(&adapter->dev, - "Cannot force ISA-only chip for I2C address 0x%02x.\n", - address); - err = -EINVAL; - goto ERROR0; - } if (is_isa) if (!request_region(address, W83781D_EXTENT, @@ -1137,12 +1128,10 @@ w83781d_detect(struct i2c_adapter *adapt else if (val1 == 0x40 && vendid == winbond && !is_isa && address == 0x2d) kind = w83783s; - else if ((val1 == 0x21 || val1 == 0x90) && vendid == winbond) + else if (val1 == 0x21 && vendid == winbond) kind = w83627hf; else if (val1 == 0x31 && !is_isa && address >= 0x28) kind = as99127f; - else if (val1 == 0x60 && vendid == winbond && is_isa) - kind = w83697hf; else { if (kind == 0) dev_warn(&new_client->dev, "Ignoring 'force' " @@ -1161,14 +1150,9 @@ w83781d_detect(struct i2c_adapter *adapt } else if (kind == w83783s) { client_name = "w83783s"; } else if (kind == w83627hf) { - if (val1 == 0x90) - client_name = "w83627thf"; - else - client_name = "w83627hf"; + client_name = "w83627hf"; } else if (kind == as99127f) { client_name = "as99127f"; - } else if (kind == w83697hf) { - client_name = "w83697hf"; } /* Fill in the remaining client fields and put into the global list */ @@ -1206,7 +1190,7 @@ w83781d_detect(struct i2c_adapter *adapt /* Register sysfs hooks */ device_create_file_in(new_client, 0); - if (kind != w83783s && kind != w83697hf) + if (kind != w83783s) device_create_file_in(new_client, 1); device_create_file_in(new_client, 2); device_create_file_in(new_client, 3); @@ -1220,24 +1204,19 @@ w83781d_detect(struct i2c_adapter *adapt device_create_file_fan(new_client, 1); device_create_file_fan(new_client, 2); - if (kind != w83697hf) - device_create_file_fan(new_client, 3); + device_create_file_fan(new_client, 3); device_create_file_temp(new_client, 1); device_create_file_temp(new_client, 2); - if (kind != w83783s && kind != w83697hf) + if (kind != w83783s) device_create_file_temp(new_client, 3); - if (kind != w83697hf) - device_create_file_vid(new_client); - - if (kind != w83697hf) - device_create_file_vrm(new_client); + device_create_file_vid(new_client); + device_create_file_vrm(new_client); device_create_file_fan_div(new_client, 1); device_create_file_fan_div(new_client, 2); - if (kind != w83697hf) - device_create_file_fan_div(new_client, 3); + device_create_file_fan_div(new_client, 3); device_create_file_alarms(new_client); @@ -1256,7 +1235,7 @@ w83781d_detect(struct i2c_adapter *adapt if (kind != as99127f && kind != w83781d) { device_create_file_sensor(new_client, 1); device_create_file_sensor(new_client, 2); - if (kind != w83783s && kind != w83697hf) + if (kind != w83783s) device_create_file_sensor(new_client, 3); } @@ -1479,7 +1458,7 @@ w83781d_init_client(struct i2c_client *c else data->sens[i - 1] = 2; } - if ((type == w83783s || type == w83697hf) && (i == 2)) + if (type == w83783s && i == 2) break; } } @@ -1495,7 +1474,7 @@ w83781d_init_client(struct i2c_client *c } /* Enable temp3 */ - if (type != w83783s && type != w83697hf) { + if (type != w83783s) { tmp = w83781d_read_value(client, W83781D_REG_TEMP3_CONFIG); if (tmp & 0x01) { @@ -1536,8 +1515,7 @@ static struct w83781d_data *w83781d_upda dev_dbg(dev, "Starting device update\n"); for (i = 0; i <= 8; i++) { - if ((data->type == w83783s || data->type == w83697hf) - && (i == 1)) + if (data->type == w83783s && i == 1) continue; /* 783S has no in1 */ data->in[i] = w83781d_read_value(client, W83781D_REG_IN(i)); @@ -1545,7 +1523,7 @@ static struct w83781d_data *w83781d_upda w83781d_read_value(client, W83781D_REG_IN_MIN(i)); data->in_max[i] = w83781d_read_value(client, W83781D_REG_IN_MAX(i)); - if ((data->type != w83782d) && (data->type != w83697hf) + if ((data->type != w83782d) && (data->type != w83627hf) && (i == 6)) break; } @@ -1581,7 +1559,7 @@ static struct w83781d_data *w83781d_upda w83781d_read_value(client, W83781D_REG_TEMP_OVER(2)); data->temp_max_hyst_add[0] = w83781d_read_value(client, W83781D_REG_TEMP_HYST(2)); - if (data->type != w83783s && data->type != w83697hf) { + if (data->type != w83783s) { data->temp_add[1] = w83781d_read_value(client, W83781D_REG_TEMP(3)); data->temp_max_add[1] = @@ -1592,26 +1570,18 @@ static struct w83781d_data *w83781d_upda W83781D_REG_TEMP_HYST(3)); } i = w83781d_read_value(client, W83781D_REG_VID_FANDIV); - if (data->type != w83697hf) { - data->vid = i & 0x0f; - data->vid |= - (w83781d_read_value(client, W83781D_REG_CHIPID) & - 0x01) - << 4; - } + data->vid = i & 0x0f; + data->vid |= (w83781d_read_value(client, + W83781D_REG_CHIPID) & 0x01) << 4; data->fan_div[0] = (i >> 4) & 0x03; data->fan_div[1] = (i >> 6) & 0x03; - if (data->type != w83697hf) { - data->fan_div[2] = (w83781d_read_value(client, - W83781D_REG_PIN) - >> 6) & 0x03; - } + data->fan_div[2] = (w83781d_read_value(client, + W83781D_REG_PIN) >> 6) & 0x03; if ((data->type != w83781d) && (data->type != as99127f)) { i = w83781d_read_value(client, W83781D_REG_VBAT); data->fan_div[0] |= (i >> 3) & 0x04; data->fan_div[1] |= (i >> 4) & 0x04; - if (data->type != w83697hf) - data->fan_div[2] |= (i >> 5) & 0x04; + data->fan_div[2] |= (i >> 5) & 0x04; } data->alarms = w83781d_read_value(client, ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] I2C: fix ds1374 build 2005-06-22 5:17 ` [PATCH] I2C: w83781d: remove non-i2c sensor chips Greg KH @ 2005-06-22 5:17 ` Greg KH 0 siblings, 0 replies; 15+ messages in thread From: Greg KH @ 2005-06-22 5:17 UTC (permalink / raw) To: linux-kernel, sensors; +Cc: akpm [PATCH] I2C: fix ds1374 build Not all architectures implement asm/rtc.h Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> --- commit 0087e5ef577d0d6e664be7ab4be513b6a482e7ec tree deeb3f4a6aca34359e20d926bc28165f1f3e84f0 parent 7c7a530463ced6011789937b24dc2bfba43c706b author Andrew Morton <akpm@osdl.org> Mon, 20 Jun 2005 14:25:45 -0700 committer Greg Kroah-Hartman <gregkh@suse.de> Tue, 21 Jun 2005 21:55:00 -0700 drivers/i2c/chips/ds1374.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -27,8 +27,6 @@ #include <linux/rtc.h> #include <linux/bcd.h> -#include <asm/rtc.h> - #define DS1374_REG_TOD0 0x00 #define DS1374_REG_TOD1 0x01 #define DS1374_REG_TOD2 0x02 ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2005-06-22 10:17 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1119417466661@kroah.com>
2005-06-22 5:17 ` [PATCH] I2C: documentation update 3/3 Greg KH
2005-06-22 5:17 ` [PATCH] I2C: lm90 uses new sysfs callbacks Greg KH
2005-06-22 5:17 ` [PATCH] I2C: add adm9240 driver documentation Greg KH
2005-06-22 5:17 ` [PATCH] I2C: pcf8574 driver cleanup Greg KH
2005-06-22 5:17 ` [PATCH] I2C: lm83 uses new sysfs callbacks Greg KH
2005-06-22 5:17 ` [PATCH] I2C: drivers/i2c/chips/it87.c: use dynamic " Greg KH
2005-06-22 5:17 ` [PATCH] I2C: lm63 uses new " Greg KH
2005-06-22 5:17 ` [PATCH] I2C: rename i2c-sysfs.h to hwmon-sysfs.h Greg KH
2005-06-22 5:17 ` [PATCH] I2C: add new pca9539 driver Greg KH
2005-06-22 5:17 ` [PATCH] max6875: new i2c device driver Greg KH
2005-06-22 5:17 ` [PATCH] I2C: fix up ds1374.c driver so it will build Greg KH
2005-06-22 5:17 ` [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (2/2) Greg KH
2005-06-22 5:17 ` [PATCH] I2C: Add support for Maxim/Dallas DS1374 Real-Time Clock Chip (1/2) Greg KH
2005-06-22 5:17 ` [PATCH] I2C: w83781d: remove non-i2c sensor chips Greg KH
2005-06-22 5:17 ` [PATCH] I2C: fix ds1374 build Greg KH
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox