[GIT PATCH] PCI patches for 2.6.12

[GIT PATCH] PCI patches for 2.6.12

[Greg KH]

Here are a bunch of PCI patches against your latest git tree, and even a
merge (hey, it was my first, I was happy it all worked out ok...).  They
include:
	- acpi pci hotplug driver updates and reworks.
	- dma bursting help for drivers
	- msi minor cleanups
	- MCFG acpi table parsing for pci busses

All of these patches have been in the -mm tree for the past few months.
I have not included any of the pci patches in the -mm tree that were
causing people problems.  Those are still being worked on to get
correct.

Please pull from:
	rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6.git/
or if master.kernel.org hasn't synced up yet:
	master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6.git/

The full patches will be sent to the linux-kernel and linux-pci mailing
lists, if anyone wants to see them.

thanks,

greg k-h


 Documentation/kernel-parameters.txt |    4 
 arch/i386/kernel/acpi/boot.c        |   57 +-
 arch/i386/pci/common.c              |    8 
 arch/i386/pci/irq.c                 |   51 +-
 arch/i386/pci/legacy.c              |    2 
 arch/i386/pci/mmconfig.c            |   41 +
 arch/i386/pci/numa.c                |    2 
 arch/i386/pci/pci.h                 |    1 
 arch/ia64/kernel/acpi.c             |   38 +
 arch/ia64/kernel/iosapic.c          |  134 ++++-
 arch/ia64/pci/pci.c                 |   38 +
 arch/ppc/kernel/pci.c               |   21 
 arch/ppc64/kernel/pci.c             |   22 
 arch/x86_64/pci/mmconfig.c          |   74 ++
 drivers/acpi/container.c            |    2 
 drivers/acpi/pci_bind.c             |   27 -
 drivers/acpi/pci_root.c             |   24 
 drivers/acpi/processor_core.c       |    2 
 drivers/acpi/scan.c                 |  126 ++++-
 drivers/char/moxa.c                 |    2 
 drivers/char/rio/rio_linux.c        |    4 
 drivers/message/fusion/mptfc.c      |    4 
 drivers/message/fusion/mptscsih.c   |   10 
 drivers/message/fusion/mptscsih.h   |    2 
 drivers/message/fusion/mptspi.c     |    4 
 drivers/net/e100.c                  |    9 
 drivers/net/via-rhine.c             |   11 
 drivers/parisc/dino.c               |    1 
 drivers/parisc/lba_pci.c            |    2 
 drivers/pci/bus.c                   |   11 
 drivers/pci/hotplug/Makefile        |    4 
 drivers/pci/hotplug/acpiphp.h       |   47 -
 drivers/pci/hotplug/acpiphp_core.c  |    9 
 drivers/pci/hotplug/acpiphp_glue.c  |  900 ++++++++++++++++++++----------------
 drivers/pci/hotplug/acpiphp_pci.c   |  449 -----------------
 drivers/pci/hotplug/acpiphp_res.c   |  700 ----------------------------
 drivers/pci/hotplug/cpqphp_core.c   |    5 
 drivers/pci/msi.c                   |   88 +--
 drivers/pci/msi.h                   |    9 
 drivers/pci/pci-sysfs.c             |   26 -
 drivers/pci/probe.c                 |   29 -
 drivers/pci/proc.c                  |   14 
 drivers/pci/remove.c                |   14 
 drivers/pci/setup-bus.c             |    5 
 drivers/scsi/3w-9xxx.c              |    8 
 drivers/scsi/3w-xxxx.c              |    8 
 drivers/scsi/ipr.c                  |   10 
 drivers/scsi/megaraid.c             |    8 
 include/acpi/acpi_bus.h             |   17 
 include/acpi/acpi_drivers.h         |    1 
 include/asm-alpha/pci.h             |   19 
 include/asm-arm/pci.h               |   10 
 include/asm-frv/pci.h               |   10 
 include/asm-i386/pci.h              |   10 
 include/asm-ia64/iosapic.h          |   12 
 include/asm-ia64/pci.h              |   19 
 include/asm-mips/pci.h              |   10 
 include/asm-parisc/pci.h            |   19 
 include/asm-ppc/pci.h               |   16 
 include/asm-ppc64/pci.h             |   26 +
 include/asm-sh/pci.h                |   10 
 include/asm-sh64/pci.h              |   10 
 include/asm-sparc/pci.h             |   10 
 include/asm-sparc64/pci.h           |   19 
 include/asm-v850/pci.h              |   10 
 include/asm-x86_64/pci.h            |   10 
 include/linux/acpi.h                |   19 
 include/linux/pci.h                 |   33 +
 include/linux/pci_ids.h             |    2 
 69 files changed, 1509 insertions(+), 1850 deletions(-)

---------------

Amit Gud:
  pci: remove deprecates
  pci: remove deprecates

Andrew Morton:
  PCI: fix up errors after dma bursting patch and CONFIG_PCI=n

David S. Miller:
  PCI: DMA bursting advice

Greg Kroah-Hartman:
  PCI: use the MCFG table to properly access pci devices (x86-64)
  PCI: use the MCFG table to properly access pci devices (i386)
  PCI: make drivers use the pci shutdown callback instead of the driver core callback.
  PCI: add proper MCFG table parsing to ACPI core.
  PCI: clean up the MSI code a bit.

jayalk@intworks.biz:
  PCI Allow OutOfRange PIRQ table address

Keith Moore:
  cpqphp: fix oops during unload without probe

Kenji Kaneshige:
  ACPI based I/O APIC hot-plug: acpiphp support
  ACPI based I/O APIC hot-plug: add interfaces
  ACPI based I/O APIC hot-plug: ia64 support

Michael Ellerman:
  PCI: fix-pci-mmap-on-ppc-and-ppc64.patch

Rajesh Shah:
  acpi hotplug: aCPI based root bridge hot-add
  acpi hotplug: decouple slot power state changes from physical hotplug
  acpi hotplug: fix slot power-down problem with acpiphp
  acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle
  acpi hotplug: convert acpiphp to use generic resource code
  acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently
  acpi hotplug: clean up notify handlers on acpiphp unload
  acpi bridge hotadd: Read bridge resources when fixing up the bus
  acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources
  acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug
  acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists
  acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge
  acpi bridge hotadd: Link newly created pci child bus to its parent on creation
  acpi bridge hotadd: Fix pci_enable_device() for p2p bridges
  acpi bridge hotadd: ACPI based root bridge hot-add
  acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe

[PATCH] PCI Allow OutOfRange PIRQ table address

[Greg KH]

[PATCH] PCI Allow OutOfRange PIRQ table address

I updated this to remove unnecessary variable initialization, make
check_routing be inline only and not __init, switch to strtoul, and
formatting fixes as per Randy Dunlap's recommendations.

I updated this to change pirq_table_addr to a long, and to add a warning
msg if the PIRQ table wasn't found at the specified address, as per thread
with Matthew Wilcox.

In our hardware situation, the BIOS is unable to store or generate it's PIRQ
table in the F0000h-100000h standard range. This patch adds a pci kernel
parameter, pirqaddr to allow the bootloader (or BIOS based loader) to inform
the kernel where the PIRQ table got stored. A beneficial side-effect is that,
if one's BIOS uses a static address each time for it's PIRQ table, then
pirqaddr can be used to avoid the $pirq search through that address block each
time at boot for normal PIRQ BIOSes.

Signed-off-by: Jaya Kumar <jayalk@intworks.biz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 120bb4246a99cc6e9cc976573fcbcd0ee9d544ef
tree d447957833d89dbd049259f813530fa8cc81d206
parent 020f46a39eb7b99a575b9f4d105fce2b142acdf1
author jayalk@intworks.biz <jayalk@intworks.biz> Mon, 21 Mar 2005 20:20:42 -0800
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:38 -0700

 Documentation/kernel-parameters.txt |    4 +++
 arch/i386/pci/common.c              |    6 +++-
 arch/i386/pci/irq.c                 |   51 +++++++++++++++++++++++++----------
 arch/i386/pci/pci.h                 |    1 +
 4 files changed, 47 insertions(+), 15 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1030,6 +1030,10 @@ running once the system is up.
 		irqmask=0xMMMM		[IA-32] Set a bit mask of IRQs allowed to be assigned
 					automatically to PCI devices. You can make the kernel
 					exclude IRQs of your ISA cards this way.
+		pirqaddr=0xAAAAA	[IA-32] Specify the physical address
+					of the PIRQ table (normally generated
+					by the BIOS) if it is outside the
+					F0000h-100000h range.
 		lastbus=N		[IA-32] Scan all buses till bus #N. Can be useful
 					if the kernel is unable to find your secondary buses
 					and you want to tell it explicitly which ones they are.
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -25,7 +25,8 @@ unsigned int pci_probe = PCI_PROBE_BIOS 
 
 int pci_routeirq;
 int pcibios_last_bus = -1;
-struct pci_bus *pci_root_bus = NULL;
+unsigned long pirq_table_addr;
+struct pci_bus *pci_root_bus;
 struct pci_raw_ops *raw_pci_ops;
 
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
@@ -188,6 +189,9 @@ char * __devinit  pcibios_setup(char *st
 	} else if (!strcmp(str, "biosirq")) {
 		pci_probe |= PCI_BIOS_IRQ_SCAN;
 		return NULL;
+	} else if (!strncmp(str, "pirqaddr=", 9)) {
+		pirq_table_addr = simple_strtoul(str+9, NULL, 0);
+		return NULL;
 	}
 #endif
 #ifdef CONFIG_PCI_DIRECT
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -58,6 +58,35 @@ struct irq_router_handler {
 int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
 
 /*
+ *  Check passed address for the PCI IRQ Routing Table signature
+ *  and perform checksum verification.
+ */
+
+static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+{
+	struct irq_routing_table *rt;
+	int i;
+	u8 sum;
+
+	rt = (struct irq_routing_table *) addr;
+	if (rt->signature != PIRQ_SIGNATURE ||
+	    rt->version != PIRQ_VERSION ||
+	    rt->size % 16 ||
+	    rt->size < sizeof(struct irq_routing_table))
+		return NULL;
+	sum = 0;
+	for (i=0; i < rt->size; i++)
+		sum += addr[i];
+	if (!sum) {
+		DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		return rt;
+	}
+	return NULL;
+}
+
+
+
+/*
  *  Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
  */
 
@@ -65,23 +94,17 @@ static struct irq_routing_table * __init
 {
 	u8 *addr;
 	struct irq_routing_table *rt;
-	int i;
-	u8 sum;
 
+	if (pirq_table_addr) {
+		rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr));
+		if (rt)
+			return rt;
+		printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
+	}
 	for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
-		rt = (struct irq_routing_table *) addr;
-		if (rt->signature != PIRQ_SIGNATURE ||
-		    rt->version != PIRQ_VERSION ||
-		    rt->size % 16 ||
-		    rt->size < sizeof(struct irq_routing_table))
-			continue;
-		sum = 0;
-		for(i=0; i<rt->size; i++)
-			sum += addr[i];
-		if (!sum) {
-			DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		rt = pirq_check_routing_table(addr);
+		if (rt)
 			return rt;
-		}
 	}
 	return NULL;
 }
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -27,6 +27,7 @@
 #define PCI_ASSIGN_ALL_BUSSES	0x4000
 
 extern unsigned int pci_probe;
+extern unsigned long pirq_table_addr;
 
 /* pci-i386.c */
 

[PATCH] pci: remove deprecates

[Greg KH]

[PATCH] pci: remove deprecates

Replace pci_find_device() with more safer pci_get_device().

Signed-off-by: Amit Gud <gud@eth.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 881a8c120acf7ec09c90289e2996b7c70f51e996
tree edac4f63c30cbda0604e722056b5bb2876ddd67d
parent 120bb4246a99cc6e9cc976573fcbcd0ee9d544ef
author Amit Gud <gud@eth.net> Tue, 12 Apr 2005 19:03:33 +0530
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:38 -0700

 drivers/char/moxa.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -451,7 +451,7 @@ static int __init moxa_init(void)
 		int n = (sizeof(moxa_pcibrds) / sizeof(moxa_pcibrds[0])) - 1;
 		i = 0;
 		while (i < n) {
-			while ((p = pci_find_device(moxa_pcibrds[i].vendor, moxa_pcibrds[i].device, p))!=NULL)
+			while ((p = pci_get_device(moxa_pcibrds[i].vendor, moxa_pcibrds[i].device, p))!=NULL)
 			{
 				if (pci_enable_device(p))
 					continue;

[PATCH] pci: remove deprecates

[Greg KH]

[PATCH] pci: remove deprecates

Replace pci_find_device() with more safer pci_get_device().

Signed-off-by: Amit Gud <gud@eth.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit efe1ec27837d6639eae82e1f5876910ba6433c3f
tree 16070e93c8ea98f2da9ab8546024cc6d0e11388f
parent 881a8c120acf7ec09c90289e2996b7c70f51e996
author Amit Gud <gud@eth.net> Tue, 12 Apr 2005 19:04:27 +0530
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:38 -0700

 drivers/char/rio/rio_linux.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -1095,7 +1095,7 @@ static int __init rio_init(void) 
 
 #ifdef CONFIG_PCI
     /* First look for the JET devices: */
-    while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
+    while ((pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
                                     PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, 
                                     pdev))) {
        if (pci_enable_device(pdev)) continue;
@@ -1169,7 +1169,7 @@ static int __init rio_init(void) 
   */
 
     /* Then look for the older RIO/PCI devices: */
-    while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
+    while ((pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
                                     PCI_DEVICE_ID_SPECIALIX_RIO, 
                                     pdev))) {
        if (pci_enable_device(pdev)) continue;

[PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe

[Greg KH]

[PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe

PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans a
new bridge.  For root bridge hot-plug, the bridge and it's attached devices
may not have been configured properly yet, so it's not safe to claim those
resources at this time.

This code goes away when we clean up the way pci resources are claimed (in
pci_enable_device()), so this is only a stopgap fix.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 71c3511c22e8e0648094672abec898b3bf84c18b
tree e85aa826d22c53f7ecb5c040fc0d242c8576a8a2
parent fab3fb0ac8c83072465b28ca859c420da6c6511c
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:46 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:39 -0700

 arch/ia64/pci/pci.c |   22 +++++++++++++++++++++-
 1 files changed, 21 insertions(+), 1 deletions(-)

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -373,6 +373,25 @@ void pcibios_bus_to_resource(struct pci_
 	res->end = region->end + offset;
 }
 
+static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
+{
+	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+	struct resource *devr = &dev->resource[idx];
+
+	if (!dev->bus)
+		return 0;
+	for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
+		struct resource *busr = dev->bus->resource[i];
+
+		if (!busr || ((busr->flags ^ devr->flags) & type_mask))
+			continue;
+		if ((devr->start) && (devr->start >= busr->start) &&
+				(devr->end <= busr->end))
+			return 1;
+	}
+	return 0;
+}
+
 static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 {
 	struct pci_bus_region region;
@@ -386,7 +405,8 @@ static void __devinit pcibios_fixup_devi
 		region.start = dev->resource[i].start;
 		region.end = dev->resource[i].end;
 		pcibios_bus_to_resource(dev, &dev->resource[i], &region);
-		pci_claim_resource(dev, i);
+		if ((is_valid_resource(dev, i)))
+			pci_claim_resource(dev, i);
 	}
 }
 

[PATCH] acpi bridge hotadd: ACPI based root bridge hot-add

[Greg KH]

[PATCH] acpi bridge hotadd: ACPI based root bridge hot-add

When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
devices attached to it that have not been configured by firmware.  In this
case, we need to configure the devices before starting them.  This patch
separates device start from device scan so that we can introduce the
configuration step in the middle.

I kept the existing semantics for pci_scan_bus() since there are a huge number
of callers to that function.

Also, I have no way of testing the changes I made to the parisc files, so this
needs review by those folks.  Sorry for the massive cross-post, this touches
files in many different places.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit c431ada45d65b305a6aab4557067e564b23ce5a5
tree 3fefb8a354860d9c39781dbbf042c992da5a9cd5
parent efe1ec27837d6639eae82e1f5876910ba6433c3f
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:45 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:39 -0700

 arch/i386/pci/common.c   |    2 +-
 arch/i386/pci/legacy.c   |    2 ++
 arch/i386/pci/numa.c     |    2 ++
 arch/ia64/pci/pci.c      |    2 +-
 drivers/acpi/pci_bind.c  |   16 +++++++++++++++-
 drivers/acpi/pci_root.c  |   24 +++++++++++++++++++++++-
 drivers/parisc/dino.c    |    1 +
 drivers/parisc/lba_pci.c |    2 ++
 drivers/pci/probe.c      |    2 --
 include/linux/pci.h      |    8 ++++++--
 10 files changed, 53 insertions(+), 8 deletions(-)

diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -134,7 +134,7 @@ struct pci_bus * __devinit pcibios_scan_
 
 	printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
 
-	return pci_scan_bus(busnum, &pci_root_ops, NULL);
+	return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, NULL);
 }
 
 extern u8 pci_cache_line_size;
diff --git a/arch/i386/pci/legacy.c b/arch/i386/pci/legacy.c
--- a/arch/i386/pci/legacy.c
+++ b/arch/i386/pci/legacy.c
@@ -45,6 +45,8 @@ static int __init pci_legacy_init(void)
 
 	printk("PCI: Probing PCI hardware\n");
 	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
 
 	pcibios_fixup_peer_bridges();
 
diff --git a/arch/i386/pci/numa.c b/arch/i386/pci/numa.c
--- a/arch/i386/pci/numa.c
+++ b/arch/i386/pci/numa.c
@@ -115,6 +115,8 @@ static int __init pci_numa_init(void)
 		return 0;
 
 	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
 	if (num_online_nodes() > 1)
 		for_each_online_node(quad) {
 			if (quad == 0)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -312,7 +312,7 @@ pci_acpi_scan_root(struct acpi_device *d
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
 			&info);
 
-	pbus = pci_scan_bus(bus, &pci_root_ops, controller);
+	pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
 	if (pbus)
 		pcibios_setup_root_windows(pbus, controller);
 
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -129,6 +129,8 @@ acpi_pci_bind (
 	char			*pathname = NULL;
 	struct acpi_buffer	buffer = {0, NULL};
 	acpi_handle		handle = NULL;
+	struct pci_dev		*dev;
+	struct pci_bus 		*bus;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_bind");
 
@@ -193,8 +195,20 @@ acpi_pci_bind (
 	 * Locate matching device in PCI namespace.  If it doesn't exist
 	 * this typically means that the device isn't currently inserted
 	 * (e.g. docking station, port replicator, etc.).
+	 * We cannot simply search the global pci device list, since
+	 * PCI devices are added to the global pci list when the root
+	 * bridge start ops are run, which may not have happened yet.
 	 */
-	data->dev = pci_find_slot(data->id.bus, PCI_DEVFN(data->id.device, data->id.function));
+	bus = pci_find_bus(data->id.segment, data->id.bus);
+	if (bus) {
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			if (dev->devfn == PCI_DEVFN(data->id.device,
+						data->id.function)) {
+				data->dev = dev;
+				break;
+			}
+		}
+	}
 	if (!data->dev) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, 
 			"Device %02x:%02x:%02x.%02x not present in PCI namespace\n",
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -46,6 +46,7 @@ ACPI_MODULE_NAME		("pci_root")
 
 static int acpi_pci_root_add (struct acpi_device *device);
 static int acpi_pci_root_remove (struct acpi_device *device, int type);
+static int acpi_pci_root_start (struct acpi_device *device);
 
 static struct acpi_driver acpi_pci_root_driver = {
 	.name =		ACPI_PCI_ROOT_DRIVER_NAME,
@@ -54,6 +55,7 @@ static struct acpi_driver acpi_pci_root_
 	.ops =		{
 				.add =    acpi_pci_root_add,
 				.remove = acpi_pci_root_remove,
+				.start =  acpi_pci_root_start,
 			},
 };
 
@@ -169,6 +171,7 @@ acpi_pci_root_add (
 	if (!root)
 		return_VALUE(-ENOMEM);
 	memset(root, 0, sizeof(struct acpi_pci_root));
+	INIT_LIST_HEAD(&root->node);
 
 	root->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
@@ -298,12 +301,31 @@ acpi_pci_root_add (
 			root->id.bus);
 
 end:
-	if (result)
+	if (result) {
+		if (!list_empty(&root->node))
+			list_del(&root->node);
 		kfree(root);
+	}
 
 	return_VALUE(result);
 }
 
+static int
+acpi_pci_root_start (
+	struct acpi_device	*device)
+{
+	struct acpi_pci_root	*root;
+
+	ACPI_FUNCTION_TRACE("acpi_pci_root_start");
+
+	list_for_each_entry(root, &acpi_pci_roots, node) {
+		if (root->handle == device->handle) {
+			pci_bus_add_devices(root->bus);
+			return_VALUE(0);
+		}
+	}
+	return_VALUE(-ENODEV);
+}
 
 static int
 acpi_pci_root_remove (
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -993,6 +993,7 @@ dino_driver_callback(struct parisc_devic
 	bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
 				    &dino_cfg_ops, NULL);
 	if(bus) {
+		pci_bus_add_devices(bus);
 		/* This code *depends* on scanning being single threaded
 		 * if it isn't, this global bus number count will fail
 		 */
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1570,6 +1570,8 @@ lba_driver_probe(struct parisc_device *d
 	lba_bus = lba_dev->hba.hba_bus =
 		pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
 				cfg_ops, NULL);
+	if (lba_bus)
+		pci_bus_add_devices(lba_bus);
 
 	/* This is in lieu of calling pci_assign_unassigned_resources() */
 	if (is_pdc_pat()) {
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -911,8 +911,6 @@ struct pci_bus * __devinit pci_scan_bus_
 
 	b->subordinate = pci_scan_child_bus(b);
 
-	pci_bus_add_devices(b);
-
 	return b;
 
 sys_create_link_err:
diff --git a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -734,16 +734,20 @@ void pcibios_update_irq(struct pci_dev *
 /* Generic PCI functions used internally */
 
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
+void pci_bus_add_devices(struct pci_bus *bus);
 struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata);
 static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata)
 {
-	return pci_scan_bus_parented(NULL, bus, ops, sysdata);
+	struct pci_bus *root_bus;
+	root_bus = pci_scan_bus_parented(NULL, bus, ops, sysdata);
+	if (root_bus)
+		pci_bus_add_devices(root_bus);
+	return root_bus;
 }
 int pci_scan_slot(struct pci_bus *bus, int devfn);
 struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn);
 unsigned int pci_scan_child_bus(struct pci_bus *bus);
 void pci_bus_add_device(struct pci_dev *dev);
-void pci_bus_add_devices(struct pci_bus *bus);
 void pci_name_device(struct pci_dev *dev);
 char *pci_class_name(u32 class);
 void pci_read_bridge_bases(struct pci_bus *child);

[PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges

[Greg KH]

[PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges

When checking if a PCI to PCI bridge should be enabled to decode memory and/or
IO resources, we need to look at all device resources not just the first 6.
This is needed to allow PCI bridges to pass down memory and IO accesses to
child devices even when the bridge itself does not consume resources in its
PCI BARs.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit fab3fb0ac8c83072465b28ca859c420da6c6511c
tree f4d0dc0b7e9a8bd3611e1bf7f64dfd3cb55a950c
parent c431ada45d65b305a6aab4557067e564b23ce5a5
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:45 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:39 -0700

 arch/ia64/pci/pci.c |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -418,18 +418,24 @@ pcibios_enable_resources (struct pci_dev
 	u16 cmd, old_cmd;
 	int idx;
 	struct resource *r;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
 
 	if (!dev)
 		return -EINVAL;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
+	for (idx=0; idx<PCI_NUM_RESOURCES; idx++) {
 		/* Only set up the desired resources.  */
 		if (!(mask & (1 << idx)))
 			continue;
 
 		r = &dev->resource[idx];
+		if (!(r->flags & type_mask))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
 		if (!r->start && r->end) {
 			printk(KERN_ERR
 			       "PCI: Device %s not available because of resource collisions\n",
@@ -441,8 +447,6 @@ pcibios_enable_resources (struct pci_dev
 		if (r->flags & IORESOURCE_MEM)
 			cmd |= PCI_COMMAND_MEMORY;
 	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
 	if (cmd != old_cmd) {
 		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);

[PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent on creation

[Greg KH]

[PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent on creation

When a pci child bus is created, add it to the parent's children list
immediately rather than waiting till pci_bus_add_devices().  For hot-plug
bridges/devices, pci_bus_add_devices() may be called much later, after they
have been properly configured.  In the meantime, this allows us to use the
normal pci bus search functions for the hot-plug bridges/buses.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 6ef6f0e33c4645fc8d23201ad5a6a289b4303cbb
tree ff7861a550b5eea24788ccc07ca0df5294f9067b
parent e4ea9bb7e9f177e03a917b1f1213de0315f819ee
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:49 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:40 -0700

 drivers/pci/bus.c   |   11 +++++++----
 drivers/pci/probe.c |    4 ++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -121,10 +121,13 @@ void __devinit pci_bus_add_devices(struc
 		 * If there is an unattached subordinate bus, attach
 		 * it and then scan for unattached PCI devices.
 		 */
-		if (dev->subordinate && list_empty(&dev->subordinate->node)) {
-			spin_lock(&pci_bus_lock);
-			list_add_tail(&dev->subordinate->node, &dev->bus->children);
-			spin_unlock(&pci_bus_lock);
+		if (dev->subordinate) {
+		       if (list_empty(&dev->subordinate->node)) {
+			       spin_lock(&pci_bus_lock);
+			       list_add_tail(&dev->subordinate->node,
+					       &dev->bus->children);
+			       spin_unlock(&pci_bus_lock);
+		       }
 			pci_bus_add_devices(dev->subordinate);
 
 			sysfs_create_link(&dev->subordinate->class_dev.kobj, &dev->dev.kobj, "bridge");
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -450,7 +450,7 @@ int __devinit pci_scan_bridge(struct pci
 			return max;
 		}
 
-		child = pci_alloc_child_bus(bus, dev, busnr);
+		child = pci_add_new_bus(bus, dev, busnr);
 		if (!child)
 			return max;
 		child->primary = buses & 0xFF;
@@ -477,7 +477,7 @@ int __devinit pci_scan_bridge(struct pci
 		 * This can happen when a bridge is hot-plugged */
 		if (pci_find_bus(pci_domain_nr(bus), max+1))
 			return max;
-		child = pci_alloc_child_bus(bus, dev, ++max);
+		child = pci_add_new_bus(bus, dev, ++max);
 		buses = (buses & 0xff000000)
 		      | ((unsigned int)(child->primary)     <<  0)
 		      | ((unsigned int)(child->secondary)   <<  8)

[PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge

[Greg KH]

[PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge

When hot-plugging a root bridge, as we try to assign bus numbers we may find
that the hotplugged hieratchy has more PCI to PCI bridges (i.e.  bus
requirements) than available.  Make sure we don't step over an existing bus
when that happens.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit cc57450f5c044270d2cf1dd437c1850422262109
tree 418c7546c443cfc80601da045731f6b5a9f23442
parent 71c3511c22e8e0648094672abec898b3bf84c18b
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:47 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:40 -0700

 drivers/pci/probe.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -411,7 +411,7 @@ int __devinit pci_scan_bridge(struct pci
 {
 	struct pci_bus *child;
 	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
-	u32 buses;
+	u32 buses, i;
 	u16 bctl;
 
 	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
@@ -470,6 +470,10 @@ int __devinit pci_scan_bridge(struct pci
 		/* Clear errors */
 		pci_write_config_word(dev, PCI_STATUS, 0xffff);
 
+		/* Prevent assigning a bus number that already exists.
+		 * This can happen when a bridge is hot-plugged */
+		if (pci_find_bus(pci_domain_nr(bus), max+1))
+			return max;
 		child = pci_alloc_child_bus(bus, dev, ++max);
 		buses = (buses & 0xff000000)
 		      | ((unsigned int)(child->primary)     <<  0)
@@ -501,7 +505,11 @@ int __devinit pci_scan_bridge(struct pci
 			 * as cards with a PCI-to-PCI bridge can be
 			 * inserted later.
 			 */
-			max += CARDBUS_RESERVE_BUSNR;
+			for (i=0; i<CARDBUS_RESERVE_BUSNR; i++)
+				if (pci_find_bus(pci_domain_nr(bus),
+							max+i+1))
+					break;
+			max += i;
 		}
 		/*
 		 * Set the subordinate bus number to its real value.

[PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists

[Greg KH]

[PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists

With root bridge and pci bridge hot-plug, new buses and devices can be added
or removed at run time.  Protect the pci bus and device lists with the pci
lock when doing so.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit e4ea9bb7e9f177e03a917b1f1213de0315f819ee
tree 482599b5f367e997dfe30590860091bb06219882
parent cc57450f5c044270d2cf1dd437c1850422262109
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:48 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:40 -0700

 drivers/pci/probe.c |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -374,8 +374,11 @@ struct pci_bus * __devinit pci_add_new_b
 	struct pci_bus *child;
 
 	child = pci_alloc_child_bus(parent, dev, busnr);
-	if (child)
+	if (child) {
+		spin_lock(&pci_bus_lock);
 		list_add_tail(&child->node, &parent->children);
+		spin_unlock(&pci_bus_lock);
+	}
 	return child;
 }
 
@@ -765,7 +768,9 @@ pci_scan_single_device(struct pci_bus *b
 	 * and the bus list for fixup functions, etc.
 	 */
 	INIT_LIST_HEAD(&dev->global_list);
+	spin_lock(&pci_bus_lock);
 	list_add_tail(&dev->bus_list, &bus->devices);
+	spin_unlock(&pci_bus_lock);
 
 	return dev;
 }
@@ -886,7 +891,9 @@ struct pci_bus * __devinit pci_scan_bus_
 		pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
 		goto err_out;
 	}
+	spin_lock(&pci_bus_lock);
 	list_add_tail(&b->node, &pci_root_buses);
+	spin_unlock(&pci_bus_lock);
 
 	memset(dev, 0, sizeof(*dev));
 	dev->parent = parent;
@@ -928,7 +935,9 @@ class_dev_create_file_err:
 class_dev_reg_err:
 	device_unregister(dev);
 dev_reg_err:
+	spin_lock(&pci_bus_lock);
 	list_del(&b->node);
+	spin_unlock(&pci_bus_lock);
 err_out:
 	kfree(dev);
 	kfree(b);

[PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug

[Greg KH]

[PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug

When a root bridge hierarchy is hot-plugged, resource requirements for the new
devices may be greater than what the root bridge is decoding.  In this case,
we want to remove devices that did not get needed resources.  These devices
have been scanned into bus specific lists but not yet added to the global
device list.  Make sure the pci remove functions can handle this case.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 091ca9f06382e46d77213c35a97f7d0be9e350d2
tree a7a63e88279b03c2ba47e8c62c1a40192f3d93b7
parent 6ef6f0e33c4645fc8d23201ad5a6a289b4303cbb
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:49 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:41 -0700

 drivers/pci/remove.c |   14 +++++++++-----
 1 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -18,17 +18,21 @@ static void pci_free_resources(struct pc
 
 static void pci_destroy_dev(struct pci_dev *dev)
 {
-	pci_proc_detach_device(dev);
-	pci_remove_sysfs_dev_files(dev);
-	device_unregister(&dev->dev);
+	if (!list_empty(&dev->global_list)) {
+		pci_proc_detach_device(dev);
+		pci_remove_sysfs_dev_files(dev);
+		device_unregister(&dev->dev);
+		spin_lock(&pci_bus_lock);
+		list_del(&dev->global_list);
+		dev->global_list.next = dev->global_list.prev = NULL;
+		spin_unlock(&pci_bus_lock);
+	}
 
 	/* Remove the device from the device lists, and prevent any further
 	 * list accesses from this device */
 	spin_lock(&pci_bus_lock);
 	list_del(&dev->bus_list);
-	list_del(&dev->global_list);
 	dev->bus_list.next = dev->bus_list.prev = NULL;
-	dev->global_list.next = dev->global_list.prev = NULL;
 	spin_unlock(&pci_bus_lock);
 
 	pci_free_resources(dev);

[PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources

[Greg KH]

[PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources

When hot-plugging an I/O hierarchy that contains many bridges and leaf
devices, it's possible that there are not enough resources to start all the
device present.  If we fail to assign a resource, clear the corresponding
value in the pci_dev structure, so other code can take corrective action.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 542df5de56a23bf2d94b75e2b304ab0e5a5508a8
tree 6e9861262c3fb9cfa72a385ea8db5372c086e35b
parent 091ca9f06382e46d77213c35a97f7d0be9e350d2
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:50 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:41 -0700

 drivers/pci/setup-bus.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -72,7 +72,10 @@ pbus_assign_resources_sorted(struct pci_
 	for (list = head.next; list;) {
 		res = list->res;
 		idx = res - &list->dev->resource[0];
-		pci_assign_resource(list->dev, idx);
+		if (pci_assign_resource(list->dev, idx)) {
+			res->start = 0;
+			res->flags = 0;
+		}
 		tmp = list;
 		list = list->next;
 		kfree(tmp);

[PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus

[Greg KH]

[PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus

Read bridge io/mem/pfmem ranges when fixing up the bus so that bus resources
are tracked.  This is required to properly support pci end device and bridge
hotplug.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit f7d473d919627262816459f8dba70d72812be074
tree 8dabcd1eea9369d117962d2d3646032745c596db
parent 542df5de56a23bf2d94b75e2b304ab0e5a5508a8
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:51 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:41 -0700

 arch/ia64/pci/pci.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -418,6 +418,10 @@ pcibios_fixup_bus (struct pci_bus *b)
 {
 	struct pci_dev *dev;
 
+	if (b->self) {
+		pci_read_bridge_bases(b);
+		pcibios_fixup_device_resources(b->self);
+	}
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
 

[PATCH] acpi hotplug: clean up notify handlers on acpiphp unload

[Greg KH]

[PATCH] acpi hotplug: clean up notify handlers on acpiphp unload

A root bridge may not have directly attached hotpluggable slots under it.
Instead, it may have p2p bridges with slots under it.  In this case, we need
to clean up the p2p bridges and slots properly too.  Patch below applies on
top of the original patch, and fixes this problem.  Without this, acpiphp
leaves behind notify handlers on module unload, and subsequent module load
attempts don't work properly too.  Patch was tested on an ia64 Tiger4 box.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 364d5094a43ff2ceff3d19e40c4199771cb6cb8f
tree bc3c70c12895d22aaa96dc27632df22f4ff9ac9e
parent 42f49a6ae5dca90cd0594475502bf1c43ff1dc07
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:54 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:42 -0700

 drivers/pci/hotplug/acpiphp_glue.c |   34 ++++++++++++++++++++++++++--------
 1 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -487,18 +487,12 @@ static struct acpiphp_bridge *acpiphp_ha
 	return NULL;
 }
 
-static void remove_bridge(acpi_handle handle)
+static void cleanup_bridge(struct acpiphp_bridge *bridge)
 {
 	struct list_head *list, *tmp;
-	struct acpiphp_bridge *bridge;
 	struct acpiphp_slot *slot;
 	acpi_status status;
-
-	bridge = acpiphp_handle_to_bridge(handle);
-	if (!bridge) {
-		err("Could not find bridge for handle %p\n", handle);
-		return;
-	}
+	acpi_handle handle = bridge->handle;
 
 	status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 					    handle_hotplug_event_bridge);
@@ -529,6 +523,30 @@ static void remove_bridge(acpi_handle ha
 	kfree(bridge);
 }
 
+static acpi_status
+cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	struct acpiphp_bridge *bridge;
+
+	if (!(bridge = acpiphp_handle_to_bridge(handle)))
+		return AE_OK;
+	cleanup_bridge(bridge);
+	return AE_OK;
+}
+
+static void remove_bridge(acpi_handle handle)
+{
+	struct acpiphp_bridge *bridge;
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (bridge) {
+		cleanup_bridge(bridge);
+	} else {
+		/* clean-up p2p bridges under this host bridge */
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+				(u32)1, cleanup_p2p_bridge, NULL, NULL);
+	}
+}
 
 static int power_on_slot(struct acpiphp_slot *slot)
 {

[PATCH] acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently

[Greg KH]

[PATCH] acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently

Create new interfaces to recursively add an acpi namespace object to the acpi
device list, and recursively start the namespace object.  This is needed for
ACPI based hotplug of a root bridge hierarchy where the add operation must be
performed first and the start operation must be performed separately after the
hot-plugged devices have been properly configured.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 3fb02738b0fd36f47710a2bf207129efd2f5daa2
tree 56bd70ea1b957b601402745ee03b4c1b293ab23b
parent f7d473d919627262816459f8dba70d72812be074
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:52 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:42 -0700

 drivers/acpi/container.c      |    2 -
 drivers/acpi/processor_core.c |    2 -
 drivers/acpi/scan.c           |  126 +++++++++++++++++++++++++++++++++--------
 include/acpi/acpi_bus.h       |   17 +++++-
 4 files changed, 119 insertions(+), 28 deletions(-)

diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -153,7 +153,7 @@ container_device_add(struct acpi_device 
 		return_VALUE(-ENODEV);
 	}
 
-	result = acpi_bus_scan(*device);
+	result = acpi_bus_start(*device);
 
 	return_VALUE(result);
 }
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -723,7 +723,7 @@ int acpi_processor_device_add(
 		return_VALUE(-ENODEV);
 	}
 
-	acpi_bus_scan(*device);
+	acpi_bus_start(*device);
 
 	pr = acpi_driver_data(*device);
 	if (!pr)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -553,20 +553,29 @@ acpi_bus_driver_init (
 	 * upon possible configuration and currently allocated resources.
 	 */
 
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Driver successfully bound to device\n"));
+	return_VALUE(0);
+}
+
+int
+acpi_start_single_object (
+		struct acpi_device *device)
+{
+	int result = 0;
+	struct acpi_driver *driver;
+
+	ACPI_FUNCTION_TRACE("acpi_start_single_object");
+
+	if (!(driver = device->driver))
+		return_VALUE(0);
+
 	if (driver->ops.start) {
 		result = driver->ops.start(device);
 		if (result && driver->ops.remove)
 			driver->ops.remove(device, ACPI_BUS_REMOVAL_NORMAL);
-		return_VALUE(result);
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Driver successfully bound to device\n"));
-
-	if (driver->ops.scan) {
-		driver->ops.scan(device);
 	}
 
-	return_VALUE(0);
+	return_VALUE(result);
 }
 
 static int acpi_driver_attach(struct acpi_driver * drv)
@@ -586,6 +595,7 @@ static int acpi_driver_attach(struct acp
 
 		if (!acpi_bus_match(dev, drv)) {
 			if (!acpi_bus_driver_init(dev, drv)) {
+				acpi_start_single_object(dev);
 				atomic_inc(&drv->references);
 				count++;
 				ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found driver [%s] for device [%s]\n",
@@ -1009,8 +1019,8 @@ acpi_bus_remove (
 }
 
 
-int
-acpi_bus_add (
+static int
+acpi_add_single_object (
 	struct acpi_device	**child,
 	struct acpi_device	*parent,
 	acpi_handle		handle,
@@ -1019,7 +1029,7 @@ acpi_bus_add (
 	int			result = 0;
 	struct acpi_device	*device = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_bus_add");
+	ACPI_FUNCTION_TRACE("acpi_add_single_object");
 
 	if (!child)
 		return_VALUE(-EINVAL);
@@ -1140,7 +1150,7 @@ acpi_bus_add (
 	 *
 	 * TBD: Assumes LDM provides driver hot-plug capability.
 	 */
-	acpi_bus_find_driver(device);
+	result = acpi_bus_find_driver(device);
 
 end:
 	if (!result)
@@ -1153,10 +1163,10 @@ end:
 
 	return_VALUE(result);
 }
-EXPORT_SYMBOL(acpi_bus_add);
 
 
-int acpi_bus_scan (struct acpi_device	*start)
+static int acpi_bus_scan (struct acpi_device	*start,
+		struct acpi_bus_ops *ops)
 {
 	acpi_status		status = AE_OK;
 	struct acpi_device	*parent = NULL;
@@ -1229,9 +1239,20 @@ int acpi_bus_scan (struct acpi_device	*s
 			continue;
 		}
 
-		status = acpi_bus_add(&child, parent, chandle, type);
-		if (ACPI_FAILURE(status))
-			continue;
+		if (ops->acpi_op_add)
+			status = acpi_add_single_object(&child, parent,
+					chandle, type);
+		 else
+			status = acpi_bus_get_device(chandle, &child);
+
+		 if (ACPI_FAILURE(status))
+			 continue;
+
+		if (ops->acpi_op_start) {
+			status = acpi_start_single_object(child);
+			if (ACPI_FAILURE(status))
+				continue;
+		}
 
 		/*
 		 * If the device is present, enabled, and functioning then
@@ -1257,8 +1278,50 @@ int acpi_bus_scan (struct acpi_device	*s
 
 	return_VALUE(0);
 }
-EXPORT_SYMBOL(acpi_bus_scan);
 
+int
+acpi_bus_add (
+	struct acpi_device	**child,
+	struct acpi_device	*parent,
+	acpi_handle		handle,
+	int			type)
+{
+	int result;
+	struct acpi_bus_ops ops;
+
+	ACPI_FUNCTION_TRACE("acpi_bus_add");
+
+	result = acpi_add_single_object(child, parent, handle, type);
+	if (!result) {
+		memset(&ops, 0, sizeof(ops));
+		ops.acpi_op_add = 1;
+		result = acpi_bus_scan(*child, &ops);
+	}
+	return_VALUE(result);
+}
+EXPORT_SYMBOL(acpi_bus_add);
+
+int
+acpi_bus_start (
+	struct acpi_device *device)
+{
+	int result;
+	struct acpi_bus_ops ops;
+
+	ACPI_FUNCTION_TRACE("acpi_bus_start");
+
+	if (!device)
+		return_VALUE(-EINVAL);
+
+	result = acpi_start_single_object(device);
+	if (!result) {
+		memset(&ops, 0, sizeof(ops));
+		ops.acpi_op_start = 1;
+		result = acpi_bus_scan(device, &ops);
+	}
+	return_VALUE(result);
+}
+EXPORT_SYMBOL(acpi_bus_start);
 
 static int
 acpi_bus_trim(struct acpi_device	*start,
@@ -1331,13 +1394,19 @@ acpi_bus_scan_fixed (
 	/*
 	 * Enumerate all fixed-feature devices.
 	 */
-	if (acpi_fadt.pwr_button == 0)
-		result = acpi_bus_add(&device, acpi_root, 
+	if (acpi_fadt.pwr_button == 0) {
+		result = acpi_add_single_object(&device, acpi_root,
 			NULL, ACPI_BUS_TYPE_POWER_BUTTON);
+		if (!result)
+			result = acpi_start_single_object(device);
+	}
 
-	if (acpi_fadt.sleep_button == 0)
-		result = acpi_bus_add(&device, acpi_root, 
+	if (acpi_fadt.sleep_button == 0) {
+		result = acpi_add_single_object(&device, acpi_root,
 			NULL, ACPI_BUS_TYPE_SLEEP_BUTTON);
+		if (!result)
+			result = acpi_start_single_object(device);
+	}
 
 	return_VALUE(result);
 }
@@ -1346,6 +1415,7 @@ acpi_bus_scan_fixed (
 static int __init acpi_scan_init(void)
 {
 	int result;
+	struct acpi_bus_ops ops;
 
 	ACPI_FUNCTION_TRACE("acpi_scan_init");
 
@@ -1357,17 +1427,23 @@ static int __init acpi_scan_init(void)
 	/*
 	 * Create the root device in the bus's device tree
 	 */
-	result = acpi_bus_add(&acpi_root, NULL, ACPI_ROOT_OBJECT, 
+	result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
 		ACPI_BUS_TYPE_SYSTEM);
 	if (result)
 		goto Done;
 
+	result = acpi_start_single_object(acpi_root);
+
 	/*
 	 * Enumerate devices in the ACPI namespace.
 	 */
 	result = acpi_bus_scan_fixed(acpi_root);
-	if (!result) 
-		result = acpi_bus_scan(acpi_root);
+	if (!result) {
+		memset(&ops, 0, sizeof(ops));
+		ops.acpi_op_add = 1;
+		ops.acpi_op_start = 1;
+		result = acpi_bus_scan(acpi_root, &ops);
+	}
 
 	if (result)
 		acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -108,6 +108,21 @@ typedef int (*acpi_op_unbind)	(struct ac
 typedef int (*acpi_op_match)	(struct acpi_device *device,
 				 struct acpi_driver *driver);
 
+struct acpi_bus_ops {
+	u32 			acpi_op_add:1;
+	u32			acpi_op_remove:1;
+	u32			acpi_op_lock:1;
+	u32			acpi_op_start:1;
+	u32			acpi_op_stop:1;
+	u32			acpi_op_suspend:1;
+	u32			acpi_op_resume:1;
+	u32			acpi_op_scan:1;
+	u32			acpi_op_bind:1;
+	u32			acpi_op_unbind:1;
+	u32			acpi_op_match:1;
+	u32			reserved:21;
+};
+
 struct acpi_device_ops {
 	acpi_op_add		add;
 	acpi_op_remove		remove;
@@ -327,9 +342,9 @@ int acpi_bus_generate_event (struct acpi
 int acpi_bus_receive_event (struct acpi_bus_event *event);
 int acpi_bus_register_driver (struct acpi_driver *driver);
 int acpi_bus_unregister_driver (struct acpi_driver *driver);
-int acpi_bus_scan (struct acpi_device *start);
 int acpi_bus_add (struct acpi_device **child, struct acpi_device *parent,
 		acpi_handle handle, int type);
+int acpi_bus_start (struct acpi_device *device);
 
 
 int acpi_match_ids (struct acpi_device	*device, char	*ids);

[PATCH] acpi hotplug: convert acpiphp to use generic resource code

[Greg KH]

[PATCH] acpi hotplug: convert acpiphp to use generic resource code

This patch converts acpiphp to use the generic PCI resource assignment code.
It's quite large, but most of it is deleting the acpiphp_pci and acpiphp_res
files.  It's tested on an hp Integrity rx8620 (which won't work without this
patch).  Testers with other hardware welcomed.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 42f49a6ae5dca90cd0594475502bf1c43ff1dc07
tree f894d1335be0aaa10955f61aa92200540ef13624
parent 4ce448e5fae62689b06027b46f470b944e5c2193
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:53 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:42 -0700

 drivers/pci/hotplug/Makefile       |    4 
 drivers/pci/hotplug/acpiphp.h      |   47 --
 drivers/pci/hotplug/acpiphp_core.c |    9 
 drivers/pci/hotplug/acpiphp_glue.c |  455 ++++++-----------------
 drivers/pci/hotplug/acpiphp_pci.c  |  449 -----------------------
 drivers/pci/hotplug/acpiphp_res.c  |  700 ------------------------------------
 6 files changed, 134 insertions(+), 1530 deletions(-)

diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -36,9 +36,7 @@ ibmphp-objs		:=	ibmphp_core.o	\
 				ibmphp_hpc.o
 
 acpiphp-objs		:=	acpiphp_core.o	\
-				acpiphp_glue.o	\
-				acpiphp_pci.o	\
-				acpiphp_res.o
+				acpiphp_glue.o
 
 rpaphp-objs		:=	rpaphp_core.o	\
 				rpaphp_pci.o	\
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -7,6 +7,8 @@
  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
  * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
+ * Copyright (C) 2003-2005 Hewlett Packard
  *
  * All rights reserved.
  *
@@ -52,7 +54,6 @@
 
 struct acpiphp_bridge;
 struct acpiphp_slot;
-struct pci_resource;
 
 /*
  * struct slot - slot information for each *physical* slot
@@ -65,15 +66,6 @@ struct slot {
 	struct acpiphp_slot	*acpi_slot;
 };
 
-/*
- * struct pci_resource - describes pci resource (mem, pfmem, io, bus)
- */
-struct pci_resource {
-	struct pci_resource * next;
-	u64 base;
-	u32 length;
-};
-
 /**
  * struct hpp_param - ACPI 2.0 _HPP Hot Plug Parameters
  * @cache_line_size in DWORD
@@ -101,10 +93,6 @@ struct acpiphp_bridge {
 	int type;
 	int nr_slots;
 
-	u8 seg;
-	u8 bus;
-	u8 sub;
-
 	u32 flags;
 
 	/* This bus (host bridge) or Secondary bus (PCI-to-PCI bridge) */
@@ -117,12 +105,6 @@ struct acpiphp_bridge {
 	struct hpp_param hpp;
 
 	spinlock_t res_lock;
-
-	/* available resources on this bus */
-	struct pci_resource *mem_head;
-	struct pci_resource *p_mem_head;
-	struct pci_resource *io_head;
-	struct pci_resource *bus_head;
 };
 
 
@@ -163,12 +145,6 @@ struct acpiphp_func {
 
 	u8		function;	/* pci function# */
 	u32		flags;		/* see below */
-
-	/* resources used for this function */
-	struct pci_resource *mem_head;
-	struct pci_resource *p_mem_head;
-	struct pci_resource *io_head;
-	struct pci_resource *bus_head;
 };
 
 /**
@@ -243,25 +219,6 @@ extern u8 acpiphp_get_latch_status (stru
 extern u8 acpiphp_get_adapter_status (struct acpiphp_slot *slot);
 extern u32 acpiphp_get_address (struct acpiphp_slot *slot);
 
-/* acpiphp_pci.c */
-extern struct pci_dev *acpiphp_allocate_pcidev (struct pci_bus *pbus, int dev, int fn);
-extern int acpiphp_configure_slot (struct acpiphp_slot *slot);
-extern int acpiphp_configure_function (struct acpiphp_func *func);
-extern void acpiphp_unconfigure_function (struct acpiphp_func *func);
-extern int acpiphp_detect_pci_resource (struct acpiphp_bridge *bridge);
-extern int acpiphp_init_func_resource (struct acpiphp_func *func);
-
-/* acpiphp_res.c */
-extern struct pci_resource *acpiphp_get_io_resource (struct pci_resource **head, u32 size);
-extern struct pci_resource *acpiphp_get_resource (struct pci_resource **head, u32 size);
-extern struct pci_resource *acpiphp_get_resource_with_base (struct pci_resource **head, u64 base, u32 size);
-extern int acpiphp_resource_sort_and_combine (struct pci_resource **head);
-extern struct pci_resource *acpiphp_make_resource (u64 base, u32 length);
-extern void acpiphp_move_resource (struct pci_resource **from, struct pci_resource **to);
-extern void acpiphp_free_resource (struct pci_resource **res);
-extern void acpiphp_dump_resource (struct acpiphp_bridge *bridge); /* debug */
-extern void acpiphp_dump_func_resource (struct acpiphp_func *func); /* debug */
-
 /* variables */
 extern int acpiphp_debug;
 
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -7,6 +7,8 @@
  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
  * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
+ * Copyright (C) 2003-2005 Hewlett Packard
  *
  * All rights reserved.
  *
@@ -53,8 +55,8 @@ int acpiphp_debug;
 static int num_slots;
 static struct acpiphp_attention_info *attention_info;
 
-#define DRIVER_VERSION	"0.4"
-#define DRIVER_AUTHOR	"Greg Kroah-Hartman <gregkh@us.ibm.com>, Takayoshi Kochi <t-kochi@bq.jp.nec.com>"
+#define DRIVER_VERSION	"0.5"
+#define DRIVER_AUTHOR	"Greg Kroah-Hartman <gregkh@us.ibm.com>, Takayoshi Kochi <t-kochi@bq.jp.nec.com>, Matthew Wilcox <willy@hp.com>"
 #define DRIVER_DESC	"ACPI Hot Plug PCI Controller Driver"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -281,8 +283,7 @@ static int get_adapter_status(struct hot
 /**
  * get_address - get pci address of a slot
  * @hotplug_slot: slot to get status
- * @busdev: pointer to struct pci_busdev (seg, bus, dev)
- *
+ * @value: pointer to struct pci_busdev (seg, bus, dev)
  */
 static int get_address(struct hotplug_slot *hotplug_slot, u32 *value)
 {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -4,6 +4,8 @@
  * Copyright (C) 2002,2003 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
  * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
  * Copyright (C) 2002,2003 NEC Corporation
+ * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
+ * Copyright (C) 2003-2005 Hewlett Packard
  *
  * All rights reserved.
  *
@@ -26,6 +28,16 @@
  *
  */
 
+/*
+ * Lifetime rules for pci_dev:
+ *  - The one in acpiphp_func has its refcount elevated by pci_get_slot()
+ *    when the driver is loaded or when an insertion event occurs.  It loses
+ *    a refcount when its ejected or the driver unloads.
+ *  - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
+ *    when the bridge is scanned and it loses a refcount when the bridge
+ *    is removed.
+ */
+
 #include <linux/init.h>
 #include <linux/module.h>
 
@@ -178,21 +190,18 @@ register_slot(acpi_handle handle, u32 lv
 
 		bridge->nr_slots++;
 
-		dbg("found ACPI PCI Hotplug slot at PCI %02x:%02x Slot:%d\n",
-		    slot->bridge->bus, slot->device, slot->sun);
+		dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+				slot->sun, pci_domain_nr(bridge->pci_bus),
+				bridge->pci_bus->number, slot->device);
 	}
 
 	newfunc->slot = slot;
 	list_add_tail(&newfunc->sibling, &slot->funcs);
 
 	/* associate corresponding pci_dev */
-	newfunc->pci_dev = pci_find_slot(bridge->bus,
+	newfunc->pci_dev = pci_get_slot(bridge->pci_bus,
 					 PCI_DEVFN(device, function));
 	if (newfunc->pci_dev) {
-		if (acpiphp_init_func_resource(newfunc) < 0) {
-			kfree(newfunc);
-			return AE_ERROR;
-		}
 		slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
 	}
 
@@ -227,62 +236,6 @@ static int detect_ejectable_slots(acpi_h
 }
 
 
-/* decode ACPI _CRS data and convert into our internal resource list
- * TBD: _TRA, etc.
- */
-static acpi_status
-decode_acpi_resource(struct acpi_resource *resource, void *context)
-{
-	struct acpiphp_bridge *bridge = (struct acpiphp_bridge *) context;
-	struct acpi_resource_address64 address;
-	struct pci_resource *res;
-
-	if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
-	    resource->id != ACPI_RSTYPE_ADDRESS32 &&
-	    resource->id != ACPI_RSTYPE_ADDRESS64)
-		return AE_OK;
-
-	acpi_resource_to_address64(resource, &address);
-
-	if (address.producer_consumer == ACPI_PRODUCER && address.address_length > 0) {
-		dbg("resource type: %d: 0x%llx - 0x%llx\n", address.resource_type,
-		    (unsigned long long)address.min_address_range,
-		    (unsigned long long)address.max_address_range);
-		res = acpiphp_make_resource(address.min_address_range,
-				    address.address_length);
-		if (!res) {
-			err("out of memory\n");
-			return AE_OK;
-		}
-
-		switch (address.resource_type) {
-		case ACPI_MEMORY_RANGE:
-			if (address.attribute.memory.cache_attribute == ACPI_PREFETCHABLE_MEMORY) {
-				res->next = bridge->p_mem_head;
-				bridge->p_mem_head = res;
-			} else {
-				res->next = bridge->mem_head;
-				bridge->mem_head = res;
-			}
-			break;
-		case ACPI_IO_RANGE:
-			res->next = bridge->io_head;
-			bridge->io_head = res;
-			break;
-		case ACPI_BUS_NUMBER_RANGE:
-			res->next = bridge->bus_head;
-			bridge->bus_head = res;
-			break;
-		default:
-			/* invalid type */
-			kfree(res);
-			break;
-		}
-	}
-
-	return AE_OK;
-}
-
 /* decode ACPI 2.0 _HPP hot plug parameters */
 static void decode_hpp(struct acpiphp_bridge *bridge)
 {
@@ -346,9 +299,6 @@ static void init_bridge_misc(struct acpi
 	/* decode ACPI 2.0 _HPP (hot plug parameters) */
 	decode_hpp(bridge);
 
-	/* subtract all resources already allocated */
-	acpiphp_detect_pci_resource(bridge);
-
 	/* register all slot objects under this bridge */
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1,
 				     register_slot, bridge, NULL);
@@ -364,16 +314,12 @@ static void init_bridge_misc(struct acpi
 	}
 
 	list_add(&bridge->list, &bridge_list);
-
-	dbg("Bridge resource:\n");
-	acpiphp_dump_resource(bridge);
 }
 
 
 /* allocate and initialize host bridge data structure */
-static void add_host_bridge(acpi_handle *handle, int seg, int bus)
+static void add_host_bridge(acpi_handle *handle, struct pci_bus *pci_bus)
 {
-	acpi_status status;
 	struct acpiphp_bridge *bridge;
 
 	bridge = kmalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
@@ -384,52 +330,19 @@ static void add_host_bridge(acpi_handle 
 
 	bridge->type = BRIDGE_TYPE_HOST;
 	bridge->handle = handle;
-	bridge->seg = seg;
-	bridge->bus = bus;
 
-	bridge->pci_bus = pci_find_bus(seg, bus);
+	bridge->pci_bus = pci_bus;
 
 	spin_lock_init(&bridge->res_lock);
 
-	/* to be overridden when we decode _CRS	*/
-	bridge->sub = bridge->bus;
-
-	/* decode resources */
-
-	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
-		decode_acpi_resource, bridge);
-
-	if (ACPI_FAILURE(status)) {
-		err("failed to decode bridge resources\n");
-		kfree(bridge);
-		return;
-	}
-
-	acpiphp_resource_sort_and_combine(&bridge->io_head);
-	acpiphp_resource_sort_and_combine(&bridge->mem_head);
-	acpiphp_resource_sort_and_combine(&bridge->p_mem_head);
-	acpiphp_resource_sort_and_combine(&bridge->bus_head);
-
-	dbg("ACPI _CRS resource:\n");
-	acpiphp_dump_resource(bridge);
-
-	if (bridge->bus_head) {
-		bridge->bus = bridge->bus_head->base;
-		bridge->sub = bridge->bus_head->base + bridge->bus_head->length - 1;
-	}
-
 	init_bridge_misc(bridge);
 }
 
 
 /* allocate and initialize PCI-to-PCI bridge data structure */
-static void add_p2p_bridge(acpi_handle *handle, int seg, int bus, int dev, int fn)
+static void add_p2p_bridge(acpi_handle *handle, struct pci_dev *pci_dev)
 {
 	struct acpiphp_bridge *bridge;
-	u8 tmp8;
-	u16 tmp16;
-	u64 base64, limit64;
-	u32 base, limit, base32u, limit32u;
 
 	bridge = kmalloc(sizeof(struct acpiphp_bridge), GFP_KERNEL);
 	if (bridge == NULL) {
@@ -441,133 +354,22 @@ static void add_p2p_bridge(acpi_handle *
 
 	bridge->type = BRIDGE_TYPE_P2P;
 	bridge->handle = handle;
-	bridge->seg = seg;
-
-	bridge->pci_dev = pci_find_slot(bus, PCI_DEVFN(dev, fn));
-	if (!bridge->pci_dev) {
-		err("Can't get pci_dev\n");
-		kfree(bridge);
-		return;
-	}
 
-	bridge->pci_bus = bridge->pci_dev->subordinate;
+	bridge->pci_dev = pci_dev_get(pci_dev);
+	bridge->pci_bus = pci_dev->subordinate;
 	if (!bridge->pci_bus) {
 		err("This is not a PCI-to-PCI bridge!\n");
-		kfree(bridge);
-		return;
+		goto err;
 	}
 
 	spin_lock_init(&bridge->res_lock);
 
-	bridge->bus = bridge->pci_bus->number;
-	bridge->sub = bridge->pci_bus->subordinate;
-
-	/*
-	 * decode resources under this P2P bridge
-	 */
-
-	/* I/O resources */
-	pci_read_config_byte(bridge->pci_dev, PCI_IO_BASE, &tmp8);
-	base = tmp8;
-	pci_read_config_byte(bridge->pci_dev, PCI_IO_LIMIT, &tmp8);
-	limit = tmp8;
-
-	switch (base & PCI_IO_RANGE_TYPE_MASK) {
-	case PCI_IO_RANGE_TYPE_16:
-		base = (base << 8) & 0xf000;
-		limit = ((limit << 8) & 0xf000) + 0xfff;
-		bridge->io_head = acpiphp_make_resource((u64)base, limit - base + 1);
-		if (!bridge->io_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("16bit I/O range: %04x-%04x\n",
-		    (u32)bridge->io_head->base,
-		    (u32)(bridge->io_head->base + bridge->io_head->length - 1));
-		break;
-	case PCI_IO_RANGE_TYPE_32:
-		pci_read_config_word(bridge->pci_dev, PCI_IO_BASE_UPPER16, &tmp16);
-		base = ((u32)tmp16 << 16) | ((base << 8) & 0xf000);
-		pci_read_config_word(bridge->pci_dev, PCI_IO_LIMIT_UPPER16, &tmp16);
-		limit = (((u32)tmp16 << 16) | ((limit << 8) & 0xf000)) + 0xfff;
-		bridge->io_head = acpiphp_make_resource((u64)base, limit - base + 1);
-		if (!bridge->io_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("32bit I/O range: %08x-%08x\n",
-		    (u32)bridge->io_head->base,
-		    (u32)(bridge->io_head->base + bridge->io_head->length - 1));
-		break;
-	case 0x0f:
-		dbg("I/O space unsupported\n");
-		break;
-	default:
-		warn("Unknown I/O range type\n");
-	}
-
-	/* Memory resources (mandatory for P2P bridge) */
-	pci_read_config_word(bridge->pci_dev, PCI_MEMORY_BASE, &tmp16);
-	base = (tmp16 & 0xfff0) << 16;
-	pci_read_config_word(bridge->pci_dev, PCI_MEMORY_LIMIT, &tmp16);
-	limit = ((tmp16 & 0xfff0) << 16) | 0xfffff;
-	bridge->mem_head = acpiphp_make_resource((u64)base, limit - base + 1);
-	if (!bridge->mem_head) {
-		err("out of memory\n");
-		kfree(bridge);
-		return;
-	}
-	dbg("32bit Memory range: %08x-%08x\n",
-	    (u32)bridge->mem_head->base,
-	    (u32)(bridge->mem_head->base + bridge->mem_head->length-1));
-
-	/* Prefetchable Memory resources (optional) */
-	pci_read_config_word(bridge->pci_dev, PCI_PREF_MEMORY_BASE, &tmp16);
-	base = tmp16;
-	pci_read_config_word(bridge->pci_dev, PCI_PREF_MEMORY_LIMIT, &tmp16);
-	limit = tmp16;
-
-	switch (base & PCI_MEMORY_RANGE_TYPE_MASK) {
-	case PCI_PREF_RANGE_TYPE_32:
-		base = (base & 0xfff0) << 16;
-		limit = ((limit & 0xfff0) << 16) | 0xfffff;
-		bridge->p_mem_head = acpiphp_make_resource((u64)base, limit - base + 1);
-		if (!bridge->p_mem_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("32bit Prefetchable memory range: %08x-%08x\n",
-		    (u32)bridge->p_mem_head->base,
-		    (u32)(bridge->p_mem_head->base + bridge->p_mem_head->length - 1));
-		break;
-	case PCI_PREF_RANGE_TYPE_64:
-		pci_read_config_dword(bridge->pci_dev, PCI_PREF_BASE_UPPER32, &base32u);
-		pci_read_config_dword(bridge->pci_dev, PCI_PREF_LIMIT_UPPER32, &limit32u);
-		base64 = ((u64)base32u << 32) | ((base & 0xfff0) << 16);
-		limit64 = (((u64)limit32u << 32) | ((limit & 0xfff0) << 16)) + 0xfffff;
-
-		bridge->p_mem_head = acpiphp_make_resource(base64, limit64 - base64 + 1);
-		if (!bridge->p_mem_head) {
-			err("out of memory\n");
-			kfree(bridge);
-			return;
-		}
-		dbg("64bit Prefetchable memory range: %08x%08x-%08x%08x\n",
-		    (u32)(bridge->p_mem_head->base >> 32),
-		    (u32)(bridge->p_mem_head->base & 0xffffffff),
-		    (u32)((bridge->p_mem_head->base + bridge->p_mem_head->length - 1) >> 32),
-		    (u32)((bridge->p_mem_head->base + bridge->p_mem_head->length - 1) & 0xffffffff));
-		break;
-	case 0x0f:
-		break;
-	default:
-		warn("Unknown prefetchale memory type\n");
-	}
-
 	init_bridge_misc(bridge);
+	return;
+ err:
+	pci_dev_put(pci_dev);
+	kfree(bridge);
+	return;
 }
 
 
@@ -577,14 +379,10 @@ find_p2p_bridge(acpi_handle handle, u32 
 {
 	acpi_status status;
 	acpi_handle dummy_handle;
-	unsigned long *segbus = context;
 	unsigned long tmp;
-	int seg, bus, device, function;
+	int device, function;
 	struct pci_dev *dev;
-
-	/* get PCI address */
-	seg = (*segbus >> 8) & 0xff;
-	bus = *segbus & 0xff;
+	struct pci_bus *pci_bus = context;
 
 	status = acpi_get_handle(handle, "_ADR", &dummy_handle);
 	if (ACPI_FAILURE(status))
@@ -599,20 +397,19 @@ find_p2p_bridge(acpi_handle handle, u32 
 	device = (tmp >> 16) & 0xffff;
 	function = tmp & 0xffff;
 
-	dev = pci_find_slot(bus, PCI_DEVFN(device, function));
-
-	if (!dev)
-		return AE_OK;
+	dev = pci_get_slot(pci_bus, PCI_DEVFN(device, function));
 
-	if (!dev->subordinate)
-		return AE_OK;
+	if (!dev || !dev->subordinate)
+		goto out;
 
 	/* check if this bridge has ejectable slots */
 	if (detect_ejectable_slots(handle) > 0) {
 		dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
-		add_p2p_bridge(handle, seg, bus, device, function);
+		add_p2p_bridge(handle, dev);
 	}
 
+ out:
+	pci_dev_put(dev);
 	return AE_OK;
 }
 
@@ -624,6 +421,7 @@ static int add_bridge(acpi_handle handle
 	unsigned long tmp;
 	int seg, bus;
 	acpi_handle dummy_handle;
+	struct pci_bus *pci_bus;
 
 	/* if the bridge doesn't have _STA, we assume it is always there */
 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
@@ -653,18 +451,22 @@ static int add_bridge(acpi_handle handle
 		bus = 0;
 	}
 
+	pci_bus = pci_find_bus(seg, bus);
+	if (!pci_bus) {
+		err("Can't find bus %04x:%02x\n", seg, bus);
+		return 0;
+	}
+
 	/* check if this bridge has ejectable slots */
 	if (detect_ejectable_slots(handle) > 0) {
 		dbg("found PCI host-bus bridge with hot-pluggable slots\n");
-		add_host_bridge(handle, seg, bus);
+		add_host_bridge(handle, pci_bus);
 		return 0;
 	}
 
-	tmp = seg << 8 | bus;
-
 	/* search P2P bridges under this host bridge */
 	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
-				     find_p2p_bridge, &tmp, NULL);
+				     find_p2p_bridge, pci_bus, NULL);
 
 	if (ACPI_FAILURE(status))
 		warn("find_p2p_bridge faied (error code = 0x%x)\n",status);
@@ -672,10 +474,59 @@ static int add_bridge(acpi_handle handle
 	return 0;
 }
 
+static struct acpiphp_bridge *acpiphp_handle_to_bridge(acpi_handle handle)
+{
+	struct list_head *head;
+	list_for_each(head, &bridge_list) {
+		struct acpiphp_bridge *bridge = list_entry(head,
+						struct acpiphp_bridge, list);
+		if (bridge->handle == handle)
+			return bridge;
+	}
+
+	return NULL;
+}
 
 static void remove_bridge(acpi_handle handle)
 {
-	/* No-op for now .. */
+	struct list_head *list, *tmp;
+	struct acpiphp_bridge *bridge;
+	struct acpiphp_slot *slot;
+	acpi_status status;
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (!bridge) {
+		err("Could not find bridge for handle %p\n", handle);
+		return;
+	}
+
+	status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+					    handle_hotplug_event_bridge);
+	if (ACPI_FAILURE(status))
+		err("failed to remove notify handler\n");
+
+	slot = bridge->slots;
+	while (slot) {
+		struct acpiphp_slot *next = slot->next;
+		list_for_each_safe (list, tmp, &slot->funcs) {
+			struct acpiphp_func *func;
+			func = list_entry(list, struct acpiphp_func, sibling);
+			status = acpi_remove_notify_handler(func->handle,
+						ACPI_SYSTEM_NOTIFY,
+						handle_hotplug_event_func);
+			if (ACPI_FAILURE(status))
+				err("failed to remove notify handler\n");
+			pci_dev_put(func->pci_dev);
+			list_del(list);
+			kfree(func);
+		}
+		kfree(slot);
+		slot = next;
+	}
+
+	pci_dev_put(bridge->pci_dev);
+	list_del(&bridge->list);
+	kfree(bridge);
 }
 
 
@@ -782,70 +633,56 @@ static int power_off_slot(struct acpiphp
  */
 static int enable_device(struct acpiphp_slot *slot)
 {
-	u8 bus;
 	struct pci_dev *dev;
-	struct pci_bus *child;
+	struct pci_bus *bus = slot->bridge->pci_bus;
 	struct list_head *l;
 	struct acpiphp_func *func;
 	int retval = 0;
-	int num;
+	int num, max, pass;
 
 	if (slot->flags & SLOT_ENABLED)
 		goto err_exit;
 
 	/* sanity check: dev should be NULL when hot-plugged in */
-	dev = pci_find_slot(slot->bridge->bus, PCI_DEVFN(slot->device, 0));
+	dev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0));
 	if (dev) {
 		/* This case shouldn't happen */
 		err("pci_dev structure already exists.\n");
+		pci_dev_put(dev);
 		retval = -1;
 		goto err_exit;
 	}
 
-	/* allocate resources to device */
-	retval = acpiphp_configure_slot(slot);
-	if (retval)
-		goto err_exit;
-
-	/* returned `dev' is the *first function* only! */
-	num = pci_scan_slot(slot->bridge->pci_bus, PCI_DEVFN(slot->device, 0));
-	if (num)
-		pci_bus_add_devices(slot->bridge->pci_bus);
-	dev = pci_find_slot(slot->bridge->bus, PCI_DEVFN(slot->device, 0));
-
-	if (!dev) {
+	num = pci_scan_slot(bus, PCI_DEVFN(slot->device, 0));
+	if (num == 0) {
 		err("No new device found\n");
 		retval = -1;
 		goto err_exit;
 	}
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		pci_read_config_byte(dev, PCI_SECONDARY_BUS, &bus);
-		child = (struct pci_bus*) pci_add_new_bus(dev->bus, dev, bus);
-		pci_do_scan_bus(child);
+	max = bus->secondary;
+	for (pass = 0; pass < 2; pass++) {
+		list_for_each_entry(dev, &bus->devices, bus_list) {
+			if (PCI_SLOT(dev->devfn) != slot->device)
+				continue;
+			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+				max = pci_scan_bridge(bus, dev, max, pass);
+		}
 	}
 
+	pci_bus_assign_resources(bus);
+	pci_bus_add_devices(bus);
+
 	/* associate pci_dev to our representation */
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
-
-		func->pci_dev = pci_find_slot(slot->bridge->bus,
-					      PCI_DEVFN(slot->device,
+		func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
 							func->function));
-		if (!func->pci_dev)
-			continue;
-
-		/* configure device */
-		retval = acpiphp_configure_function(func);
-		if (retval)
-			goto err_exit;
 	}
 
 	slot->flags |= SLOT_ENABLED;
 
-	dbg("Available resources:\n");
-	acpiphp_dump_resource(slot->bridge);
-
  err_exit:
 	return retval;
 }
@@ -866,9 +703,12 @@ static int disable_device(struct acpiphp
 
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
+		if (!func->pci_dev)
+			continue;
 
-		if (func->pci_dev)
-			acpiphp_unconfigure_function(func);
+		pci_remove_bus_device(func->pci_dev);
+		pci_dev_put(func->pci_dev);
+		func->pci_dev = NULL;
 	}
 
 	slot->flags &= (~SLOT_ENABLED);
@@ -1116,46 +956,6 @@ int __init acpiphp_glue_init(void)
  */
 void __exit acpiphp_glue_exit(void)
 {
-	struct list_head *l1, *l2, *n1, *n2;
-	struct acpiphp_bridge *bridge;
-	struct acpiphp_slot *slot, *next;
-	struct acpiphp_func *func;
-	acpi_status status;
-
-	list_for_each_safe (l1, n1, &bridge_list) {
-		bridge = (struct acpiphp_bridge *)l1;
-		slot = bridge->slots;
-		while (slot) {
-			next = slot->next;
-			list_for_each_safe (l2, n2, &slot->funcs) {
-				func = list_entry(l2, struct acpiphp_func, sibling);
-				acpiphp_free_resource(&func->io_head);
-				acpiphp_free_resource(&func->mem_head);
-				acpiphp_free_resource(&func->p_mem_head);
-				acpiphp_free_resource(&func->bus_head);
-				status = acpi_remove_notify_handler(func->handle,
-								    ACPI_SYSTEM_NOTIFY,
-								    handle_hotplug_event_func);
-				if (ACPI_FAILURE(status))
-					err("failed to remove notify handler\n");
-				kfree(func);
-			}
-			kfree(slot);
-			slot = next;
-		}
-		status = acpi_remove_notify_handler(bridge->handle, ACPI_SYSTEM_NOTIFY,
-						    handle_hotplug_event_bridge);
-		if (ACPI_FAILURE(status))
-			err("failed to remove notify handler\n");
-
-		acpiphp_free_resource(&bridge->io_head);
-		acpiphp_free_resource(&bridge->mem_head);
-		acpiphp_free_resource(&bridge->p_mem_head);
-		acpiphp_free_resource(&bridge->bus_head);
-
-		kfree(bridge);
-	}
-
 	acpi_pci_unregister_driver(&acpi_pci_hp_driver);
 }
 
@@ -1173,11 +973,14 @@ int __init acpiphp_get_num_slots(void)
 
 	list_for_each (node, &bridge_list) {
 		bridge = (struct acpiphp_bridge *)node;
-		dbg("Bus%d %dslot(s)\n", bridge->bus, bridge->nr_slots);
+		dbg("Bus %04x:%02x has %d slot%s\n",
+				pci_domain_nr(bridge->pci_bus),
+				bridge->pci_bus->number, bridge->nr_slots,
+				bridge->nr_slots == 1 ? "" : "s");
 		num_slots += bridge->nr_slots;
 	}
 
-	dbg("Total %dslots\n", num_slots);
+	dbg("Total %d slots\n", num_slots);
 	return num_slots;
 }
 
@@ -1274,13 +1077,6 @@ int acpiphp_disable_slot(struct acpiphp_
 	if (retval)
 		goto err_exit;
 
-	acpiphp_resource_sort_and_combine(&slot->bridge->io_head);
-	acpiphp_resource_sort_and_combine(&slot->bridge->mem_head);
-	acpiphp_resource_sort_and_combine(&slot->bridge->p_mem_head);
-	acpiphp_resource_sort_and_combine(&slot->bridge->bus_head);
-	dbg("Available resources:\n");
-	acpiphp_dump_resource(slot->bridge);
-
  err_exit:
 	up(&slot->crit_sect);
 	return retval;
@@ -1335,9 +1131,10 @@ u8 acpiphp_get_adapter_status(struct acp
 u32 acpiphp_get_address(struct acpiphp_slot *slot)
 {
 	u32 address;
+	struct pci_bus *pci_bus = slot->bridge->pci_bus;
 
-	address = ((slot->bridge->seg) << 16) |
-		  ((slot->bridge->bus) << 8) |
+	address = (pci_domain_nr(pci_bus) << 16) |
+		  (pci_bus->number << 8) |
 		  slot->device;
 
 	return address;
diff --git a/drivers/pci/hotplug/acpiphp_pci.c b/drivers/pci/hotplug/acpiphp_pci.c
deleted file mode 100644
--- a/drivers/pci/hotplug/acpiphp_pci.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * ACPI PCI HotPlug PCI configuration space management
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001,2002 IBM Corp.
- * Copyright (C) 2002 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
- * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
- * Copyright (C) 2002 NEC Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <t-kochi@bq.jp.nec.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include "../pci.h"
-#include "pci_hotplug.h"
-#include "acpiphp.h"
-
-#define MY_NAME "acpiphp_pci"
-
-
-/* allocate mem/pmem/io resource to a new function */
-static int init_config_space (struct acpiphp_func *func)
-{
-	u32 bar, len;
-	u32 address[] = {
-		PCI_BASE_ADDRESS_0,
-		PCI_BASE_ADDRESS_1,
-		PCI_BASE_ADDRESS_2,
-		PCI_BASE_ADDRESS_3,
-		PCI_BASE_ADDRESS_4,
-		PCI_BASE_ADDRESS_5,
-		0
-	};
-	int count;
-	struct acpiphp_bridge *bridge;
-	struct pci_resource *res;
-	struct pci_bus *pbus;
-	int bus, device, function;
-	unsigned int devfn;
-	u16 tmp;
-
-	bridge = func->slot->bridge;
-	pbus = bridge->pci_bus;
-	bus = bridge->bus;
-	device = func->slot->device;
-	function = func->function;
-	devfn = PCI_DEVFN(device, function);
-
-	for (count = 0; address[count]; count++) {	/* for 6 BARs */
-		pci_bus_write_config_dword(pbus, devfn,
-					   address[count], 0xFFFFFFFF);
-		pci_bus_read_config_dword(pbus, devfn, address[count], &bar);
-
-		if (!bar)	/* This BAR is not implemented */
-			continue;
-
-		dbg("Device %02x.%02x BAR %d wants %x\n", device, function, count, bar);
-
-		if (bar & PCI_BASE_ADDRESS_SPACE_IO) {
-			/* This is IO */
-
-			len = bar & (PCI_BASE_ADDRESS_IO_MASK & 0xFFFF);
-			len = len & ~(len - 1);
-
-			dbg("len in IO %x, BAR %d\n", len, count);
-
-			spin_lock(&bridge->res_lock);
-			res = acpiphp_get_io_resource(&bridge->io_head, len);
-			spin_unlock(&bridge->res_lock);
-
-			if (!res) {
-				err("cannot allocate requested io for %02x:%02x.%d len %x\n",
-				    bus, device, function, len);
-				return -1;
-			}
-			pci_bus_write_config_dword(pbus, devfn,
-						   address[count],
-						   (u32)res->base);
-			res->next = func->io_head;
-			func->io_head = res;
-
-		} else {
-			/* This is Memory */
-			if (bar & PCI_BASE_ADDRESS_MEM_PREFETCH) {
-				/* pfmem */
-
-				len = bar & 0xFFFFFFF0;
-				len = ~len + 1;
-
-				dbg("len in PFMEM %x, BAR %d\n", len, count);
-
-				spin_lock(&bridge->res_lock);
-				res = acpiphp_get_resource(&bridge->p_mem_head, len);
-				spin_unlock(&bridge->res_lock);
-
-				if (!res) {
-					err("cannot allocate requested pfmem for %02x:%02x.%d len %x\n",
-					    bus, device, function, len);
-					return -1;
-				}
-
-				pci_bus_write_config_dword(pbus, devfn,
-							   address[count],
-							   (u32)res->base);
-
-				if (bar & PCI_BASE_ADDRESS_MEM_TYPE_64) {	/* takes up another dword */
-					dbg("inside the pfmem 64 case, count %d\n", count);
-					count += 1;
-					pci_bus_write_config_dword(pbus, devfn,
-								   address[count],
-								   (u32)(res->base >> 32));
-				}
-
-				res->next = func->p_mem_head;
-				func->p_mem_head = res;
-
-			} else {
-				/* regular memory */
-
-				len = bar & 0xFFFFFFF0;
-				len = ~len + 1;
-
-				dbg("len in MEM %x, BAR %d\n", len, count);
-
-				spin_lock(&bridge->res_lock);
-				res = acpiphp_get_resource(&bridge->mem_head, len);
-				spin_unlock(&bridge->res_lock);
-
-				if (!res) {
-					err("cannot allocate requested pfmem for %02x:%02x.%d len %x\n",
-					    bus, device, function, len);
-					return -1;
-				}
-
-				pci_bus_write_config_dword(pbus, devfn,
-							   address[count],
-							   (u32)res->base);
-
-				if (bar & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-					/* takes up another dword */
-					dbg("inside mem 64 case, reg. mem, count %d\n", count);
-					count += 1;
-					pci_bus_write_config_dword(pbus, devfn,
-								   address[count],
-								   (u32)(res->base >> 32));
-				}
-
-				res->next = func->mem_head;
-				func->mem_head = res;
-
-			}
-		}
-	}
-
-	/* disable expansion rom */
-	pci_bus_write_config_dword(pbus, devfn, PCI_ROM_ADDRESS, 0x00000000);
-
-	/* set PCI parameters from _HPP */
-	pci_bus_write_config_byte(pbus, devfn, PCI_CACHE_LINE_SIZE,
-				  bridge->hpp.cache_line_size);
-	pci_bus_write_config_byte(pbus, devfn, PCI_LATENCY_TIMER,
-				  bridge->hpp.latency_timer);
-
-	pci_bus_read_config_word(pbus, devfn, PCI_COMMAND, &tmp);
-	if (bridge->hpp.enable_SERR)
-		tmp |= PCI_COMMAND_SERR;
-	if (bridge->hpp.enable_PERR)
-		tmp |= PCI_COMMAND_PARITY;
-	pci_bus_write_config_word(pbus, devfn, PCI_COMMAND, tmp);
-
-	return 0;
-}
-
-/* detect_used_resource - subtract resource under dev from bridge */
-static int detect_used_resource (struct acpiphp_bridge *bridge, struct pci_dev *dev)
-{
-	int count;
-
-	dbg("Device %s\n", pci_name(dev));
-
-	for (count = 0; count < DEVICE_COUNT_RESOURCE; count++) {
-		struct pci_resource *res;
-		struct pci_resource **head;
-		unsigned long base = dev->resource[count].start;
-		unsigned long len = dev->resource[count].end - base + 1;
-		unsigned long flags = dev->resource[count].flags;
-
-		if (!flags)
-			continue;
-
-		dbg("BAR[%d] 0x%lx - 0x%lx (0x%lx)\n", count, base,
-				base + len - 1, flags);
-
-		if (flags & IORESOURCE_IO) {
-			head = &bridge->io_head;
-		} else if (flags & IORESOURCE_PREFETCH) {
-			head = &bridge->p_mem_head;
-		} else {
-			head = &bridge->mem_head;
-		}
-
-		spin_lock(&bridge->res_lock);
-		res = acpiphp_get_resource_with_base(head, base, len);
-		spin_unlock(&bridge->res_lock);
-		if (res)
-			kfree(res);
-	}
-
-	return 0;
-}
-
-
-/**
- * acpiphp_detect_pci_resource - detect resources under bridge
- * @bridge: detect all resources already used under this bridge
- *
- * collect all resources already allocated for all devices under a bridge.
- */
-int acpiphp_detect_pci_resource (struct acpiphp_bridge *bridge)
-{
-	struct list_head *l;
-	struct pci_dev *dev;
-
-	list_for_each (l, &bridge->pci_bus->devices) {
-		dev = pci_dev_b(l);
-		detect_used_resource(bridge, dev);
-	}
-
-	return 0;
-}
-
-
-/**
- * acpiphp_init_slot_resource - gather resource usage information of a slot
- * @slot: ACPI slot object to be checked, should have valid pci_dev member
- *
- * TBD: PCI-to-PCI bridge case
- *      use pci_dev->resource[]
- */
-int acpiphp_init_func_resource (struct acpiphp_func *func)
-{
-	u64 base;
-	u32 bar, len;
-	u32 address[] = {
-		PCI_BASE_ADDRESS_0,
-		PCI_BASE_ADDRESS_1,
-		PCI_BASE_ADDRESS_2,
-		PCI_BASE_ADDRESS_3,
-		PCI_BASE_ADDRESS_4,
-		PCI_BASE_ADDRESS_5,
-		0
-	};
-	int count;
-	struct pci_resource *res;
-	struct pci_dev *dev;
-
-	dev = func->pci_dev;
-	dbg("Hot-pluggable device %s\n", pci_name(dev));
-
-	for (count = 0; address[count]; count++) {	/* for 6 BARs */
-		pci_read_config_dword(dev, address[count], &bar);
-
-		if (!bar)	/* This BAR is not implemented */
-			continue;
-
-		pci_write_config_dword(dev, address[count], 0xFFFFFFFF);
-		pci_read_config_dword(dev, address[count], &len);
-
-		if (len & PCI_BASE_ADDRESS_SPACE_IO) {
-			/* This is IO */
-			base = bar & 0xFFFFFFFC;
-			len = len & (PCI_BASE_ADDRESS_IO_MASK & 0xFFFF);
-			len = len & ~(len - 1);
-
-			dbg("BAR[%d] %08x - %08x (IO)\n", count, (u32)base, (u32)base + len - 1);
-
-			res = acpiphp_make_resource(base, len);
-			if (!res)
-				goto no_memory;
-
-			res->next = func->io_head;
-			func->io_head = res;
-
-		} else {
-			/* This is Memory */
-			base = bar & 0xFFFFFFF0;
-			if (len & PCI_BASE_ADDRESS_MEM_PREFETCH) {
-				/* pfmem */
-
-				len &= 0xFFFFFFF0;
-				len = ~len + 1;
-
-				if (len & PCI_BASE_ADDRESS_MEM_TYPE_64) {	/* takes up another dword */
-					dbg("prefetch mem 64\n");
-					count += 1;
-				}
-				dbg("BAR[%d] %08x - %08x (PMEM)\n", count, (u32)base, (u32)base + len - 1);
-				res = acpiphp_make_resource(base, len);
-				if (!res)
-					goto no_memory;
-
-				res->next = func->p_mem_head;
-				func->p_mem_head = res;
-
-			} else {
-				/* regular memory */
-
-				len &= 0xFFFFFFF0;
-				len = ~len + 1;
-
-				if (len & PCI_BASE_ADDRESS_MEM_TYPE_64) {
-					/* takes up another dword */
-					dbg("mem 64\n");
-					count += 1;
-				}
-				dbg("BAR[%d] %08x - %08x (MEM)\n", count, (u32)base, (u32)base + len - 1);
-				res = acpiphp_make_resource(base, len);
-				if (!res)
-					goto no_memory;
-
-				res->next = func->mem_head;
-				func->mem_head = res;
-
-			}
-		}
-
-		pci_write_config_dword(dev, address[count], bar);
-	}
-#if 1
-	acpiphp_dump_func_resource(func);
-#endif
-
-	return 0;
-
- no_memory:
-	err("out of memory\n");
-	acpiphp_free_resource(&func->io_head);
-	acpiphp_free_resource(&func->mem_head);
-	acpiphp_free_resource(&func->p_mem_head);
-
-	return -1;
-}
-
-
-/**
- * acpiphp_configure_slot - allocate PCI resources
- * @slot: slot to be configured
- *
- * initializes a PCI functions on a device inserted
- * into the slot
- *
- */
-int acpiphp_configure_slot (struct acpiphp_slot *slot)
-{
-	struct acpiphp_func *func;
-	struct list_head *l;
-	u8 hdr;
-	u32 dvid;
-	int retval = 0;
-	int is_multi = 0;
-
-	pci_bus_read_config_byte(slot->bridge->pci_bus,
-				 PCI_DEVFN(slot->device, 0),
-				 PCI_HEADER_TYPE, &hdr);
-
-	if (hdr & 0x80)
-		is_multi = 1;
-
-	list_for_each (l, &slot->funcs) {
-		func = list_entry(l, struct acpiphp_func, sibling);
-		if (is_multi || func->function == 0) {
-			pci_bus_read_config_dword(slot->bridge->pci_bus,
-						  PCI_DEVFN(slot->device,
-							    func->function),
-						  PCI_VENDOR_ID, &dvid);
-			if (dvid != 0xffffffff) {
-				retval = init_config_space(func);
-				if (retval)
-					break;
-			}
-		}
-	}
-
-	return retval;
-}
-
-/**
- * acpiphp_configure_function - configure PCI function
- * @func: function to be configured
- *
- * initializes a PCI functions on a device inserted
- * into the slot
- *
- */
-int acpiphp_configure_function (struct acpiphp_func *func)
-{
-	/* all handled by the pci core now */
-	return 0;
-}
-
-/**
- * acpiphp_unconfigure_function - unconfigure PCI function
- * @func: function to be unconfigured
- *
- */
-void acpiphp_unconfigure_function (struct acpiphp_func *func)
-{
-	struct acpiphp_bridge *bridge;
-
-	/* if pci_dev is NULL, ignore it */
-	if (!func->pci_dev)
-		return;
-
-	pci_remove_bus_device(func->pci_dev);
-
-	/* free all resources */
-	bridge = func->slot->bridge;
-
-	spin_lock(&bridge->res_lock);
-	acpiphp_move_resource(&func->io_head, &bridge->io_head);
-	acpiphp_move_resource(&func->mem_head, &bridge->mem_head);
-	acpiphp_move_resource(&func->p_mem_head, &bridge->p_mem_head);
-	acpiphp_move_resource(&func->bus_head, &bridge->bus_head);
-	spin_unlock(&bridge->res_lock);
-}
diff --git a/drivers/pci/hotplug/acpiphp_res.c b/drivers/pci/hotplug/acpiphp_res.c
deleted file mode 100644
--- a/drivers/pci/hotplug/acpiphp_res.c
+++ /dev/null
@@ -1,700 +0,0 @@
-/*
- * ACPI PCI HotPlug Utility functions
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2002 Hiroshi Aono (h-aono@ap.jp.nec.com)
- * Copyright (C) 2002 Takayoshi Kochi (t-kochi@bq.jp.nec.com)
- * Copyright (C) 2002 NEC Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gregkh@us.ibm.com>, <t-kochi@bq.jp.nec.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/sysctl.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-
-#include <linux/ioctl.h>
-#include <linux/fcntl.h>
-
-#include <linux/list.h>
-
-#include "pci_hotplug.h"
-#include "acpiphp.h"
-
-#define MY_NAME "acpiphp_res"
-
-
-/*
- * sort_by_size - sort nodes by their length, smallest first
- */
-static int sort_by_size(struct pci_resource **head)
-{
-	struct pci_resource *current_res;
-	struct pci_resource *next_res;
-	int out_of_order = 1;
-
-	if (!(*head))
-		return 1;
-
-	if (!((*head)->next))
-		return 0;
-
-	while (out_of_order) {
-		out_of_order = 0;
-
-		/* Special case for swapping list head */
-		if (((*head)->next) &&
-		    ((*head)->length > (*head)->next->length)) {
-			out_of_order++;
-			current_res = *head;
-			*head = (*head)->next;
-			current_res->next = (*head)->next;
-			(*head)->next = current_res;
-		}
-
-		current_res = *head;
-
-		while (current_res->next && current_res->next->next) {
-			if (current_res->next->length > current_res->next->next->length) {
-				out_of_order++;
-				next_res = current_res->next;
-				current_res->next = current_res->next->next;
-				current_res = current_res->next;
-				next_res->next = current_res->next;
-				current_res->next = next_res;
-			} else
-				current_res = current_res->next;
-		}
-	}  /* End of out_of_order loop */
-
-	return 0;
-}
-
-#if 0
-/*
- * sort_by_max_size - sort nodes by their length, largest first
- */
-static int sort_by_max_size(struct pci_resource **head)
-{
-	struct pci_resource *current_res;
-	struct pci_resource *next_res;
-	int out_of_order = 1;
-
-	if (!(*head))
-		return 1;
-
-	if (!((*head)->next))
-		return 0;
-
-	while (out_of_order) {
-		out_of_order = 0;
-
-		/* Special case for swapping list head */
-		if (((*head)->next) &&
-		    ((*head)->length < (*head)->next->length)) {
-			out_of_order++;
-			current_res = *head;
-			*head = (*head)->next;
-			current_res->next = (*head)->next;
-			(*head)->next = current_res;
-		}
-
-		current_res = *head;
-
-		while (current_res->next && current_res->next->next) {
-			if (current_res->next->length < current_res->next->next->length) {
-				out_of_order++;
-				next_res = current_res->next;
-				current_res->next = current_res->next->next;
-				current_res = current_res->next;
-				next_res->next = current_res->next;
-				current_res->next = next_res;
-			} else
-				current_res = current_res->next;
-		}
-	}  /* End of out_of_order loop */
-
-	return 0;
-}
-#endif
-
-/**
- * get_io_resource - get resource for I/O ports
- *
- * this function sorts the resource list by size and then
- * returns the first node of "size" length that is not in the
- * ISA aliasing window.  If it finds a node larger than "size"
- * it will split it up.
- *
- * size must be a power of two.
- *
- * difference from get_resource is handling of ISA aliasing space.
- *
- */
-struct pci_resource *acpiphp_get_io_resource (struct pci_resource **head, u32 size)
-{
-	struct pci_resource *prevnode;
-	struct pci_resource *node;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	if (sort_by_size(head))
-		return NULL;
-
-	for (node = *head; node; node = node->next) {
-		if (node->length < size)
-			continue;
-
-		if (node->base & (size - 1)) {
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = (node->base | (size-1)) + 1;
-
-			/* Short circuit if adjusted size is too small */
-			if ((node->length - (temp_qword - node->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(node->base, temp_qword - node->base);
-
-			if (!split_node)
-				return NULL;
-
-			node->base = temp_qword;
-			node->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		} /* End of non-aligned base */
-
-		/* Don't need to check if too small since we already did */
-		if (node->length > size) {
-			/* this one is longer than we need
-			   so we'll make a new entry and split it up */
-			split_node = acpiphp_make_resource(node->base + size, node->length - size);
-
-			if (!split_node)
-				return NULL;
-
-			node->length = size;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}  /* End of too big on top end */
-
-		/* For IO make sure it's not in the ISA aliasing space */
-		if ((node->base & 0x300L) && !(node->base & 0xfffff000))
-			continue;
-
-		/* If we got here, then it is the right size
-		   Now take it out of the list */
-		if (*head == node) {
-			*head = node->next;
-		} else {
-			prevnode = *head;
-			while (prevnode->next != node)
-				prevnode = prevnode->next;
-
-			prevnode->next = node->next;
-		}
-		node->next = NULL;
-		/* Stop looping */
-		break;
-	}
-
-	return node;
-}
-
-
-#if 0
-/**
- * get_max_resource - get the largest resource
- *
- * Gets the largest node that is at least "size" big from the
- * list pointed to by head.  It aligns the node on top and bottom
- * to "size" alignment before returning it.
- */
-static struct pci_resource *acpiphp_get_max_resource (struct pci_resource **head, u32 size)
-{
-	struct pci_resource *max;
-	struct pci_resource *temp;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	if (sort_by_max_size(head))
-		return NULL;
-
-	for (max = *head;max; max = max->next) {
-
-		/* If not big enough we could probably just bail,
-		   instead we'll continue to the next. */
-		if (max->length < size)
-			continue;
-
-		if (max->base & (size - 1)) {
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = (max->base | (size-1)) + 1;
-
-			/* Short circuit if adjusted size is too small */
-			if ((max->length - (temp_qword - max->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(max->base, temp_qword - max->base);
-
-			if (!split_node)
-				return NULL;
-
-			max->base = temp_qword;
-			max->length -= split_node->length;
-
-			/* Put it next in the list */
-			split_node->next = max->next;
-			max->next = split_node;
-		}
-
-		if ((max->base + max->length) & (size - 1)) {
-			/* this one isn't end aligned properly at the top
-			   so we'll make a new entry and split it up */
-			temp_qword = ((max->base + max->length) & ~(size - 1));
-
-			split_node = acpiphp_make_resource(temp_qword,
-							   max->length + max->base - temp_qword);
-
-			if (!split_node)
-				return NULL;
-
-			max->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = max->next;
-			max->next = split_node;
-		}
-
-		/* Make sure it didn't shrink too much when we aligned it */
-		if (max->length < size)
-			continue;
-
-		/* Now take it out of the list */
-		temp = (struct pci_resource*) *head;
-		if (temp == max) {
-			*head = max->next;
-		} else {
-			while (temp && temp->next != max) {
-				temp = temp->next;
-			}
-
-			temp->next = max->next;
-		}
-
-		max->next = NULL;
-		return max;
-	}
-
-	/* If we get here, we couldn't find one */
-	return NULL;
-}
-#endif
-
-/**
- * get_resource - get resource (mem, pfmem)
- *
- * this function sorts the resource list by size and then
- * returns the first node of "size" length.  If it finds a node
- * larger than "size" it will split it up.
- *
- * size must be a power of two.
- *
- */
-struct pci_resource *acpiphp_get_resource (struct pci_resource **head, u32 size)
-{
-	struct pci_resource *prevnode;
-	struct pci_resource *node;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	if (sort_by_size(head))
-		return NULL;
-
-	for (node = *head; node; node = node->next) {
-		dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
-		    __FUNCTION__, size, node, (u32)node->base, node->length);
-		if (node->length < size)
-			continue;
-
-		if (node->base & (size - 1)) {
-			dbg("%s: not aligned\n", __FUNCTION__);
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = (node->base | (size-1)) + 1;
-
-			/* Short circuit if adjusted size is too small */
-			if ((node->length - (temp_qword - node->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(node->base, temp_qword - node->base);
-
-			if (!split_node)
-				return NULL;
-
-			node->base = temp_qword;
-			node->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		} /* End of non-aligned base */
-
-		/* Don't need to check if too small since we already did */
-		if (node->length > size) {
-			dbg("%s: too big\n", __FUNCTION__);
-			/* this one is longer than we need
-			   so we'll make a new entry and split it up */
-			split_node = acpiphp_make_resource(node->base + size, node->length - size);
-
-			if (!split_node)
-				return NULL;
-
-			node->length = size;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}  /* End of too big on top end */
-
-		dbg("%s: got one!!!\n", __FUNCTION__);
-		/* If we got here, then it is the right size
-		   Now take it out of the list */
-		if (*head == node) {
-			*head = node->next;
-		} else {
-			prevnode = *head;
-			while (prevnode->next != node)
-				prevnode = prevnode->next;
-
-			prevnode->next = node->next;
-		}
-		node->next = NULL;
-		/* Stop looping */
-		break;
-	}
-	return node;
-}
-
-/**
- * get_resource_with_base - get resource with specific base address
- *
- * this function
- * returns the first node of "size" length located at specified base address.
- * If it finds a node larger than "size" it will split it up.
- *
- * size must be a power of two.
- *
- */
-struct pci_resource *acpiphp_get_resource_with_base (struct pci_resource **head, u64 base, u32 size)
-{
-	struct pci_resource *prevnode;
-	struct pci_resource *node;
-	struct pci_resource *split_node;
-	u64 temp_qword;
-
-	if (!(*head))
-		return NULL;
-
-	if (acpiphp_resource_sort_and_combine(head))
-		return NULL;
-
-	for (node = *head; node; node = node->next) {
-		dbg(": 1st req_base=%x req_size =%x node=%p, base=%x, length=%x\n",
-		    (u32)base, size, node, (u32)node->base, node->length);
-		if (node->base > base)
-			continue;
-
-		if ((node->base + node->length) < (base + size))
-			continue;
-
-		if (node->base < base) {
-			dbg(": split 1\n");
-			/* this one isn't base aligned properly
-			   so we'll make a new entry and split it up */
-			temp_qword = base;
-
-			/* Short circuit if adjusted size is too small */
-			if ((node->length - (temp_qword - node->base)) < size)
-				continue;
-
-			split_node = acpiphp_make_resource(node->base, temp_qword - node->base);
-
-			if (!split_node)
-				return NULL;
-
-			node->base = temp_qword;
-			node->length -= split_node->length;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}
-
-		dbg(": 2nd req_base=%x req_size =%x node=%p, base=%x, length=%x\n",
-		    (u32)base, size, node, (u32)node->base, node->length);
-
-		/* Don't need to check if too small since we already did */
-		if (node->length > size) {
-			dbg(": split 2\n");
-			/* this one is longer than we need
-			   so we'll make a new entry and split it up */
-			split_node = acpiphp_make_resource(node->base + size, node->length - size);
-
-			if (!split_node)
-				return NULL;
-
-			node->length = size;
-
-			/* Put it in the list */
-			split_node->next = node->next;
-			node->next = split_node;
-		}  /* End of too big on top end */
-
-		dbg(": got one!!!\n");
-		/* If we got here, then it is the right size
-		   Now take it out of the list */
-		if (*head == node) {
-			*head = node->next;
-		} else {
-			prevnode = *head;
-			while (prevnode->next != node)
-				prevnode = prevnode->next;
-
-			prevnode->next = node->next;
-		}
-		node->next = NULL;
-		/* Stop looping */
-		break;
-	}
-	return node;
-}
-
-
-/**
- * acpiphp_resource_sort_and_combine
- *
- * Sorts all of the nodes in the list in ascending order by
- * their base addresses.  Also does garbage collection by
- * combining adjacent nodes.
- *
- * returns 0 if success
- */
-int acpiphp_resource_sort_and_combine (struct pci_resource **head)
-{
-	struct pci_resource *node1;
-	struct pci_resource *node2;
-	int out_of_order = 1;
-
-	if (!(*head))
-		return 1;
-
-	dbg("*head->next = %p\n",(*head)->next);
-
-	if (!(*head)->next)
-		return 0;	/* only one item on the list, already sorted! */
-
-	dbg("*head->base = 0x%x\n",(u32)(*head)->base);
-	dbg("*head->next->base = 0x%x\n", (u32)(*head)->next->base);
-	while (out_of_order) {
-		out_of_order = 0;
-
-		/* Special case for swapping list head */
-		if (((*head)->next) &&
-		    ((*head)->base > (*head)->next->base)) {
-			node1 = *head;
-			(*head) = (*head)->next;
-			node1->next = (*head)->next;
-			(*head)->next = node1;
-			out_of_order++;
-		}
-
-		node1 = (*head);
-
-		while (node1->next && node1->next->next) {
-			if (node1->next->base > node1->next->next->base) {
-				out_of_order++;
-				node2 = node1->next;
-				node1->next = node1->next->next;
-				node1 = node1->next;
-				node2->next = node1->next;
-				node1->next = node2;
-			} else
-				node1 = node1->next;
-		}
-	}  /* End of out_of_order loop */
-
-	node1 = *head;
-
-	while (node1 && node1->next) {
-		if ((node1->base + node1->length) == node1->next->base) {
-			/* Combine */
-			dbg("8..\n");
-			node1->length += node1->next->length;
-			node2 = node1->next;
-			node1->next = node1->next->next;
-			kfree(node2);
-		} else
-			node1 = node1->next;
-	}
-
-	return 0;
-}
-
-
-/**
- * acpiphp_make_resource - make resource structure
- * @base: base address of a resource
- * @length: length of a resource
- */
-struct pci_resource *acpiphp_make_resource (u64 base, u32 length)
-{
-	struct pci_resource *res;
-
-	res = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
-	if (res) {
-		memset(res, 0, sizeof(struct pci_resource));
-		res->base = base;
-		res->length = length;
-	}
-
-	return res;
-}
-
-
-/**
- * acpiphp_move_resource - move linked resources from one to another
- * @from: head of linked resource list
- * @to: head of linked resource list
- */
-void acpiphp_move_resource (struct pci_resource **from, struct pci_resource **to)
-{
-	struct pci_resource *tmp;
-
-	while (*from) {
-		tmp = (*from)->next;
-		(*from)->next = *to;
-		*to = *from;
-		*from = tmp;
-	}
-
-	/* *from = NULL is guaranteed */
-}
-
-
-/**
- * acpiphp_free_resource - free all linked resources
- * @res: head of linked resource list
- */
-void acpiphp_free_resource (struct pci_resource **res)
-{
-	struct pci_resource *tmp;
-
-	while (*res) {
-		tmp = (*res)->next;
-		kfree(*res);
-		*res = tmp;
-	}
-
-	/* *res = NULL is guaranteed */
-}
-
-
-/* debug support functions;  will go away sometime :) */
-static void dump_resource(struct pci_resource *head)
-{
-	struct pci_resource *p;
-	int cnt;
-
-	p = head;
-	cnt = 0;
-
-	while (p) {
-		dbg("[%02d] %08x - %08x\n",
-		    cnt++, (u32)p->base, (u32)p->base + p->length - 1);
-		p = p->next;
-	}
-}
-
-void acpiphp_dump_resource(struct acpiphp_bridge *bridge)
-{
-	dbg("I/O resource:\n");
-	dump_resource(bridge->io_head);
-	dbg("MEM resource:\n");
-	dump_resource(bridge->mem_head);
-	dbg("PMEM resource:\n");
-	dump_resource(bridge->p_mem_head);
-	dbg("BUS resource:\n");
-	dump_resource(bridge->bus_head);
-}
-
-void acpiphp_dump_func_resource(struct acpiphp_func *func)
-{
-	dbg("I/O resource:\n");
-	dump_resource(func->io_head);
-	dbg("MEM resource:\n");
-	dump_resource(func->mem_head);
-	dbg("PMEM resource:\n");
-	dump_resource(func->p_mem_head);
-	dbg("BUS resource:\n");
-	dump_resource(func->bus_head);
-}

[PATCH] acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle

[Greg KH]

[PATCH] acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle

Export an acpi interface to get PCI domain/bus/devfn information from the
corresponding namespace handle.  Used by acpiphp code to transpate the device
handle of the hot-plugged root bridge to the corresponding pci location
information.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 4ce448e5fae62689b06027b46f470b944e5c2193
tree 9edaa688203e649f63362f354d62d6a663da54b8
parent 3fb02738b0fd36f47710a2bf207129efd2f5daa2
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:53 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:42 -0700

 drivers/acpi/pci_bind.c     |   11 +++++------
 include/acpi/acpi_drivers.h |    1 +
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -61,15 +61,14 @@ acpi_pci_data_handler (
 
 
 /**
- * acpi_os_get_pci_id
+ * acpi_get_pci_id
  * ------------------
  * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem)
  * to resolve PCI information for ACPI-PCI devices defined in the namespace.
  * This typically occurs when resolving PCI operation region information.
  */
-#ifdef ACPI_FUTURE_USAGE
 acpi_status
-acpi_os_get_pci_id (
+acpi_get_pci_id (
 	acpi_handle		handle,
 	struct acpi_pci_id	*id)
 {
@@ -78,7 +77,7 @@ acpi_os_get_pci_id (
 	struct acpi_device	*device = NULL;
 	struct acpi_pci_data	*data = NULL;
 
-	ACPI_FUNCTION_TRACE("acpi_os_get_pci_id");
+	ACPI_FUNCTION_TRACE("acpi_get_pci_id");
 
 	if (!id)
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
@@ -92,7 +91,7 @@ acpi_os_get_pci_id (
 	}
 
 	status = acpi_get_data(handle, acpi_pci_data_handler, (void**) &data);
-	if (ACPI_FAILURE(status) || !data || !data->dev) {
+	if (ACPI_FAILURE(status) || !data) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, 
 			"Invalid ACPI-PCI context for device %s\n",
 			acpi_device_bid(device)));
@@ -115,7 +114,7 @@ acpi_os_get_pci_id (
 
 	return_ACPI_STATUS(AE_OK);
 }
-#endif  /*  ACPI_FUTURE_USAGE  */
+EXPORT_SYMBOL(acpi_get_pci_id);
 
 	
 int
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -68,6 +68,7 @@ void acpi_pci_irq_del_prt (int segment, 
 
 struct pci_bus;
 
+acpi_status acpi_get_pci_id (acpi_handle handle, struct acpi_pci_id *id);
 int acpi_pci_bind (struct acpi_device *device);
 int acpi_pci_unbind (struct acpi_device *device);
 int acpi_pci_bind_root (struct acpi_device *device, struct acpi_pci_id *id, struct pci_bus *bus);

[PATCH] acpi hotplug: fix slot power-down problem with acpiphp

[Greg KH]

[PATCH] acpi hotplug: fix slot power-down problem with acpiphp

Earlier I reported that Matthew's acpiphp rewrite had problem in powering down
slot on my i386 system.  The following patch is needed to get the acpiphp
rewrite properly powering down the slot.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 2f523b15901f654a9448bbd47ebe1e783ec3195b
tree 74270f9c16021a5b4accbaadddb50475e3e44701
parent 364d5094a43ff2ceff3d19e40c4199771cb6cb8f
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:55 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:43 -0700

 drivers/pci/hotplug/acpiphp_glue.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -600,7 +600,7 @@ static int power_off_slot(struct acpiphp
 	list_for_each (l, &slot->funcs) {
 		func = list_entry(l, struct acpiphp_func, sibling);
 
-		if (func->pci_dev && (func->flags & FUNC_HAS_PS3)) {
+		if (func->flags & FUNC_HAS_PS3) {
 			status = acpi_evaluate_object(func->handle, "_PS3", NULL, NULL);
 			if (ACPI_FAILURE(status)) {
 				warn("%s: _PS3 failed\n", __FUNCTION__);
@@ -615,7 +615,7 @@ static int power_off_slot(struct acpiphp
 		func = list_entry(l, struct acpiphp_func, sibling);
 
 		/* We don't want to call _EJ0 on non-existing functions. */
-		if (func->pci_dev && (func->flags & FUNC_HAS_EJ0)) {
+		if (func->flags & FUNC_HAS_EJ0) {
 			/* _EJ0 method take one argument */
 			arg_list.count = 1;
 			arg_list.pointer = &arg;

[PATCH] acpi hotplug: decouple slot power state changes from physical hotplug

[Greg KH]

[PATCH] acpi hotplug: decouple slot power state changes from physical hotplug

Current acpiphp code does not distinguish between the physical presence and
power state of a device/slot.  That is, if a device has to be disabled, it
also tries to physically ejects the device.  This patch decouples power state
from physical presence.  You can now echo to the corresponding sysfs power
control file to repeatedly enable and disable a device without having to
physically re-insert it.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 8d50e332c8bd4f4e8cc76e8ed7326aa6f18182aa
tree dd9caa96f0b5d5bff3d4fccc4be410c4ecad03aa
parent 8e7561cfbdf00fb1cee694cef0e825d0548aedbc
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:57 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:43 -0700

 drivers/pci/hotplug/acpiphp_glue.c |   69 ++++++++++++++++++++----------------
 1 files changed, 38 insertions(+), 31 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -592,8 +592,6 @@ static int power_off_slot(struct acpiphp
 	acpi_status status;
 	struct acpiphp_func *func;
 	struct list_head *l;
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
 
 	int retval = 0;
 
@@ -615,27 +613,6 @@ static int power_off_slot(struct acpiphp
 		}
 	}
 
-	list_for_each (l, &slot->funcs) {
-		func = list_entry(l, struct acpiphp_func, sibling);
-
-		/* We don't want to call _EJ0 on non-existing functions. */
-		if (func->flags & FUNC_HAS_EJ0) {
-			/* _EJ0 method take one argument */
-			arg_list.count = 1;
-			arg_list.pointer = &arg;
-			arg.type = ACPI_TYPE_INTEGER;
-			arg.integer.value = 1;
-
-			status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
-			if (ACPI_FAILURE(status)) {
-				warn("%s: _EJ0 failed\n", __FUNCTION__);
-				retval = -1;
-				goto err_exit;
-			} else
-				break;
-		}
-	}
-
 	/* TBD: evaluate _STA to check if the slot is disabled */
 
 	slot->flags &= (~SLOT_POWEREDON);
@@ -782,6 +759,39 @@ static unsigned int get_slot_status(stru
 }
 
 /**
+ * acpiphp_eject_slot - physically eject the slot
+ */
+static int acpiphp_eject_slot(struct acpiphp_slot *slot)
+{
+	acpi_status status;
+	struct acpiphp_func *func;
+	struct list_head *l;
+	struct acpi_object_list arg_list;
+	union acpi_object arg;
+
+	list_for_each (l, &slot->funcs) {
+		func = list_entry(l, struct acpiphp_func, sibling);
+
+		/* We don't want to call _EJ0 on non-existing functions. */
+		if ((func->flags & FUNC_HAS_EJ0)) {
+			/* _EJ0 method take one argument */
+			arg_list.count = 1;
+			arg_list.pointer = &arg;
+			arg.type = ACPI_TYPE_INTEGER;
+			arg.integer.value = 1;
+
+			status = acpi_evaluate_object(func->handle, "_EJ0", &arg_list, NULL);
+			if (ACPI_FAILURE(status)) {
+				warn("%s: _EJ0 failed\n", __FUNCTION__);
+				return -1;
+			} else
+				break;
+		}
+	}
+	return 0;
+}
+
+/**
  * acpiphp_check_bridge - re-enumerate devices
  *
  * Iterate over all slots under this bridge and make sure that if a
@@ -804,6 +814,8 @@ static int acpiphp_check_bridge(struct a
 			if (retval) {
 				err("Error occurred in disabling\n");
 				goto err_exit;
+			} else {
+				acpiphp_eject_slot(slot);
 			}
 			disabled++;
 		} else {
@@ -1041,7 +1053,6 @@ static void handle_hotplug_event_bridge(
 	}
 }
 
-
 /**
  * handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
  *
@@ -1084,7 +1095,8 @@ static void handle_hotplug_event_func(ac
 	case ACPI_NOTIFY_EJECT_REQUEST:
 		/* request device eject */
 		dbg("%s: Device eject notify on %s\n", __FUNCTION__, objname);
-		acpiphp_disable_slot(func->slot);
+		if (!(acpiphp_disable_slot(func->slot)))
+			acpiphp_eject_slot(func->slot);
 		break;
 
 	default:
@@ -1268,7 +1280,6 @@ int acpiphp_enable_slot(struct acpiphp_s
 	return retval;
 }
 
-
 /**
  * acpiphp_disable_slot - power off slot
  */
@@ -1300,11 +1311,7 @@ int acpiphp_disable_slot(struct acpiphp_
  */
 u8 acpiphp_get_power_status(struct acpiphp_slot *slot)
 {
-	unsigned int sta;
-
-	sta = get_slot_status(slot);
-
-	return (sta & ACPI_STA_ENABLED) ? 1 : 0;
+	return (slot->flags & SLOT_POWEREDON);
 }
 
 

[PATCH] acpi hotplug: aCPI based root bridge hot-add

[Greg KH]

[PATCH] acpi hotplug: aCPI based root bridge hot-add

acpiphp changes to support acpi based root bridge hot-add.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 8e7561cfbdf00fb1cee694cef0e825d0548aedbc
tree e17b88f3200fb35ea62c7f6896cf21977d551b8a
parent 2f523b15901f654a9448bbd47ebe1e783ec3195b
author Rajesh Shah <rajesh.shah@intel.com> Thu, 28 Apr 2005 00:25:56 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:43 -0700

 drivers/pci/hotplug/acpiphp_glue.c |  211 ++++++++++++++++++++++++++++++++++--
 1 files changed, 202 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -6,6 +6,8 @@
  * Copyright (C) 2002,2003 NEC Corporation
  * Copyright (C) 2003-2005 Matthew Wilcox (matthew.wilcox@hp.com)
  * Copyright (C) 2003-2005 Hewlett Packard
+ * Copyright (C) 2005 Rajesh Shah (rajesh.shah@intel.com)
+ * Copyright (C) 2005 Intel Corporation
  *
  * All rights reserved.
  *
@@ -304,13 +306,15 @@ static void init_bridge_misc(struct acpi
 				     register_slot, bridge, NULL);
 
 	/* install notify handler */
-	status = acpi_install_notify_handler(bridge->handle,
+	if (bridge->type != BRIDGE_TYPE_HOST) {
+		status = acpi_install_notify_handler(bridge->handle,
 					     ACPI_SYSTEM_NOTIFY,
 					     handle_hotplug_event_bridge,
 					     bridge);
 
-	if (ACPI_FAILURE(status)) {
-		err("failed to register interrupt notify handler\n");
+		if (ACPI_FAILURE(status)) {
+			err("failed to register interrupt notify handler\n");
+		}
 	}
 
 	list_add(&bridge->list, &bridge_list);
@@ -820,6 +824,143 @@ static int acpiphp_check_bridge(struct a
 	return retval;
 }
 
+static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
+{
+	u16 pci_cmd, pci_bctl;
+	struct pci_dev *cdev;
+
+	/* Program hpp values for this device */
+	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+		return;
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+			bridge->hpp.cache_line_size);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER,
+			bridge->hpp.latency_timer);
+	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+	if (bridge->hpp.enable_SERR)
+		pci_cmd |= PCI_COMMAND_SERR;
+	else
+		pci_cmd &= ~PCI_COMMAND_SERR;
+	if (bridge->hpp.enable_PERR)
+		pci_cmd |= PCI_COMMAND_PARITY;
+	else
+		pci_cmd &= ~PCI_COMMAND_PARITY;
+	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+	/* Program bridge control value and child devices */
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+				bridge->hpp.latency_timer);
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+		if (bridge->hpp.enable_SERR)
+			pci_bctl |= PCI_BRIDGE_CTL_SERR;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+		if (bridge->hpp.enable_PERR)
+			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+		if (dev->subordinate) {
+			list_for_each_entry(cdev, &dev->subordinate->devices,
+					bus_list)
+				program_hpp(cdev, bridge);
+		}
+	}
+}
+
+static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus)
+{
+	struct acpiphp_bridge bridge;
+	struct pci_dev *dev;
+
+	memset(&bridge, 0, sizeof(bridge));
+	bridge.handle = handle;
+	decode_hpp(&bridge);
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		program_hpp(dev, &bridge);
+
+}
+
+/*
+ * Remove devices for which we could not assign resources, call
+ * arch specific code to fix-up the bus
+ */
+static void acpiphp_sanitize_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	int i;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
+			struct resource *res = &dev->resource[i];
+			if ((res->flags & type_mask) && !res->start &&
+					res->end) {
+				/* Could not assign a required resources
+				 * for this device, remove it */
+				pci_remove_bus_device(dev);
+				break;
+			}
+		}
+	}
+}
+
+/* Program resources in newly inserted bridge */
+static int acpiphp_configure_bridge (acpi_handle handle)
+{
+	struct acpi_pci_id pci_id;
+	struct pci_bus *bus;
+
+	if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
+		err("cannot get PCI domain and bus number for bridge\n");
+		return -EINVAL;
+	}
+	bus = pci_find_bus(pci_id.segment, pci_id.bus);
+	if (!bus) {
+		err("cannot find bus %d:%d\n",
+				pci_id.segment, pci_id.bus);
+		return -EINVAL;
+	}
+
+	pci_bus_size_bridges(bus);
+	pci_bus_assign_resources(bus);
+	acpiphp_sanitize_bus(bus);
+	acpiphp_set_hpp_values(handle, bus);
+	pci_enable_bridges(bus);
+	return 0;
+}
+
+static void handle_bridge_insertion(acpi_handle handle, u32 type)
+{
+	struct acpi_device *device, *pdevice;
+	acpi_handle phandle;
+
+	if ((type != ACPI_NOTIFY_BUS_CHECK) &&
+			(type != ACPI_NOTIFY_DEVICE_CHECK)) {
+		err("unexpected notification type %d\n", type);
+		return;
+	}
+
+	acpi_get_parent(handle, &phandle);
+	if (acpi_bus_get_device(phandle, &pdevice)) {
+		dbg("no parent device, assuming NULL\n");
+		pdevice = NULL;
+	}
+	if (acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE)) {
+		err("cannot add bridge to acpi list\n");
+		return;
+	}
+	if (!acpiphp_configure_bridge(handle) &&
+		!acpi_bus_start(device))
+		add_bridge(handle);
+	else
+		err("cannot configure and start bridge\n");
+
+}
+
 /*
  * ACPI event handlers
  */
@@ -840,8 +981,19 @@ static void handle_hotplug_event_bridge(
 	char objname[64];
 	struct acpi_buffer buffer = { .length = sizeof(objname),
 				      .pointer = objname };
+	struct acpi_device *device;
 
-	bridge = (struct acpiphp_bridge *)context;
+	if (acpi_bus_get_device(handle, &device)) {
+		/* This bridge must have just been physically inserted */
+		handle_bridge_insertion(handle, type);
+		return;
+	}
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (!bridge) {
+		err("cannot get bridge info\n");
+		return;
+	}
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 
@@ -941,6 +1093,47 @@ static void handle_hotplug_event_func(ac
 	}
 }
 
+static int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+static acpi_status
+find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	int *count = (int *)context;
+
+	if (is_root_bridge(handle)) {
+		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+				handle_hotplug_event_bridge, NULL);
+			(*count)++;
+	}
+	return AE_OK ;
+}
 
 static struct acpi_pci_driver acpi_pci_hp_driver = {
 	.add =		add_bridge,
@@ -953,15 +1146,15 @@ static struct acpi_pci_driver acpi_pci_h
  */
 int __init acpiphp_glue_init(void)
 {
-	int num;
-
-	if (list_empty(&pci_root_buses))
-		return -1;
+	int num = 0;
 
-	num = acpi_pci_register_driver(&acpi_pci_hp_driver);
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+			ACPI_UINT32_MAX, find_root_bridges, &num, NULL);
 
 	if (num <= 0)
 		return -1;
+	else
+		acpi_pci_register_driver(&acpi_pci_hp_driver);
 
 	return 0;
 }

[PATCH] ACPI based I/O APIC hot-plug: ia64 support

[Greg KH]

[PATCH] ACPI based I/O APIC hot-plug: ia64 support

This is an ia64 implementation of acpi_register_ioapic() and
acpi_unregister_ioapic() interfaces.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 0e888adc41ffc02b700ade715c182a17e766af84
tree b3d745d7a292213daf107c690ea43e5589397867
parent b1bb248a5d2230a3d8ef42199c742194a8580b15
author Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Thu, 28 Apr 2005 00:25:58 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:44 -0700

 arch/ia64/kernel/acpi.c    |   21 ++++---
 arch/ia64/kernel/iosapic.c |  134 +++++++++++++++++++++++++++++++++++++-------
 include/asm-ia64/iosapic.h |   12 +++-
 3 files changed, 135 insertions(+), 32 deletions(-)

diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -236,9 +236,7 @@ acpi_parse_iosapic (acpi_table_entry_hea
 	if (BAD_MADT_ENTRY(iosapic, end))
 		return -EINVAL;
 
-	iosapic_init(iosapic->address, iosapic->global_irq_base);
-
-	return 0;
+	return iosapic_init(iosapic->address, iosapic->global_irq_base);
 }
 
 
@@ -772,7 +770,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic);
  
 
 #ifdef CONFIG_ACPI_NUMA
-acpi_status __init
+acpi_status __devinit
 acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
@@ -829,16 +827,23 @@ acpi_map_iosapic (acpi_handle handle, u3
 int
 acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base)
 {
-	/* TBD */
-	return -EINVAL;
+	int err;
+
+	if ((err = iosapic_init(phys_addr, gsi_base)))
+		return err;
+
+#if CONFIG_ACPI_NUMA
+	acpi_map_iosapic(handle, 0, NULL, NULL);
+#endif /* CONFIG_ACPI_NUMA */
+
+	return 0;
 }
 EXPORT_SYMBOL(acpi_register_ioapic);
 
 int
 acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base)
 {
-	/* TBD */
-	return -EINVAL;
+	return iosapic_remove(gsi_base);
 }
 EXPORT_SYMBOL(acpi_unregister_ioapic);
 
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -129,14 +129,13 @@ static struct iosapic {
 	char __iomem	*addr;		/* base address of IOSAPIC */
 	unsigned int 	gsi_base;	/* first GSI assigned to this IOSAPIC */
 	unsigned short 	num_rte;	/* number of RTE in this IOSAPIC */
+	int		rtes_inuse;	/* # of RTEs in use on this IOSAPIC */
 #ifdef CONFIG_NUMA
 	unsigned short	node;		/* numa node association via pxm */
 #endif
 } iosapic_lists[NR_IOSAPICS];
 
-static int num_iosapic;
-
-static unsigned char pcat_compat __initdata;	/* 8259 compatibility flag */
+static unsigned char pcat_compat __devinitdata;	/* 8259 compatibility flag */
 
 static int iosapic_kmalloc_ok;
 static LIST_HEAD(free_rte_list);
@@ -149,7 +148,7 @@ find_iosapic (unsigned int gsi)
 {
 	int i;
 
-	for (i = 0; i < num_iosapic; i++) {
+	for (i = 0; i < NR_IOSAPICS; i++) {
 		if ((unsigned) (gsi - iosapic_lists[i].gsi_base) < iosapic_lists[i].num_rte)
 			return i;
 	}
@@ -598,6 +597,7 @@ register_intr (unsigned int gsi, int vec
 		rte->refcnt++;
 		list_add_tail(&rte->rte_list, &iosapic_intr_info[vector].rtes);
 		iosapic_intr_info[vector].count++;
+		iosapic_lists[index].rtes_inuse++;
 	}
 	else if (vector_is_shared(vector)) {
 		struct iosapic_intr_info *info = &iosapic_intr_info[vector];
@@ -778,7 +778,7 @@ void
 iosapic_unregister_intr (unsigned int gsi)
 {
 	unsigned long flags;
-	int irq, vector;
+	int irq, vector, index;
 	irq_desc_t *idesc;
 	u32 low32;
 	unsigned long trigger, polarity;
@@ -819,6 +819,9 @@ iosapic_unregister_intr (unsigned int gs
 		list_del(&rte->rte_list);
 		iosapic_intr_info[vector].count--;
 		iosapic_free_rte(rte);
+		index = find_iosapic(gsi);
+		iosapic_lists[index].rtes_inuse--;
+		WARN_ON(iosapic_lists[index].rtes_inuse < 0);
 
 		trigger	 = iosapic_intr_info[vector].trigger;
 		polarity = iosapic_intr_info[vector].polarity;
@@ -952,30 +955,86 @@ iosapic_system_init (int system_pcat_com
 	}
 }
 
-void __init
+static inline int
+iosapic_alloc (void)
+{
+	int index;
+
+	for (index = 0; index < NR_IOSAPICS; index++)
+		if (!iosapic_lists[index].addr)
+			return index;
+
+	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+	return -1;
+}
+
+static inline void
+iosapic_free (int index)
+{
+	memset(&iosapic_lists[index], 0, sizeof(iosapic_lists[0]));
+}
+
+static inline int
+iosapic_check_gsi_range (unsigned int gsi_base, unsigned int ver)
+{
+	int index;
+	unsigned int gsi_end, base, end;
+
+	/* check gsi range */
+	gsi_end = gsi_base + ((ver >> 16) & 0xff);
+	for (index = 0; index < NR_IOSAPICS; index++) {
+		if (!iosapic_lists[index].addr)
+			continue;
+
+		base = iosapic_lists[index].gsi_base;
+		end  = base + iosapic_lists[index].num_rte - 1;
+
+		if (gsi_base < base && gsi_end < base)
+			continue;/* OK */
+
+		if (gsi_base > end && gsi_end > end)
+			continue; /* OK */
+
+		return -EBUSY;
+	}
+	return 0;
+}
+
+int __devinit
 iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 {
-	int num_rte;
+	int num_rte, err, index;
 	unsigned int isa_irq, ver;
 	char __iomem *addr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	{
+		addr = ioremap(phys_addr, 0);
+		ver = iosapic_version(addr);
 
-	addr = ioremap(phys_addr, 0);
-	ver = iosapic_version(addr);
+		if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
+			iounmap(addr);
+			spin_unlock_irqrestore(&iosapic_lock, flags);
+			return err;
+		}
 
-	/*
-	 * The MAX_REDIR register holds the highest input pin
-	 * number (starting from 0).
-	 * We add 1 so that we can use it for number of pins (= RTEs)
-	 */
-	num_rte = ((ver >> 16) & 0xff) + 1;
+		/*
+		 * The MAX_REDIR register holds the highest input pin
+		 * number (starting from 0).
+		 * We add 1 so that we can use it for number of pins (= RTEs)
+		 */
+		num_rte = ((ver >> 16) & 0xff) + 1;
 
-	iosapic_lists[num_iosapic].addr = addr;
-	iosapic_lists[num_iosapic].gsi_base = gsi_base;
-	iosapic_lists[num_iosapic].num_rte = num_rte;
+		index = iosapic_alloc();
+		iosapic_lists[index].addr = addr;
+		iosapic_lists[index].gsi_base = gsi_base;
+		iosapic_lists[index].num_rte = num_rte;
 #ifdef CONFIG_NUMA
-	iosapic_lists[num_iosapic].node = MAX_NUMNODES;
+		iosapic_lists[index].node = MAX_NUMNODES;
 #endif
-	num_iosapic++;
+	}
+	spin_unlock_irqrestore(&iosapic_lock, flags);
 
 	if ((gsi_base == 0) && pcat_compat) {
 		/*
@@ -986,10 +1045,43 @@ iosapic_init (unsigned long phys_addr, u
 		for (isa_irq = 0; isa_irq < 16; ++isa_irq)
 			iosapic_override_isa_irq(isa_irq, isa_irq, IOSAPIC_POL_HIGH, IOSAPIC_EDGE);
 	}
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG
+int
+iosapic_remove (unsigned int gsi_base)
+{
+	int index, err = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	{
+		index = find_iosapic(gsi_base);
+		if (index < 0) {
+			printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
+			       __FUNCTION__, gsi_base);
+			goto out;
+		}
+
+		if (iosapic_lists[index].rtes_inuse) {
+			err = -EBUSY;
+			printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
+			       __FUNCTION__, gsi_base);
+			goto out;
+		}
+
+		iounmap(iosapic_lists[index].addr);
+		iosapic_free(index);
+	}
+ out:
+	spin_unlock_irqrestore(&iosapic_lock, flags);
+	return err;
 }
+#endif /* CONFIG_HOTPLUG */
 
 #ifdef CONFIG_NUMA
-void __init
+void __devinit
 map_iosapic_to_node(unsigned int gsi_base, int node)
 {
 	int index;
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
--- a/include/asm-ia64/iosapic.h
+++ b/include/asm-ia64/iosapic.h
@@ -71,8 +71,11 @@ static inline void iosapic_eoi(char __io
 }
 
 extern void __init iosapic_system_init (int pcat_compat);
-extern void __init iosapic_init (unsigned long address,
+extern int __devinit iosapic_init (unsigned long address,
 				    unsigned int gsi_base);
+#ifdef CONFIG_HOTPLUG
+extern int iosapic_remove (unsigned int gsi_base);
+#endif /* CONFIG_HOTPLUG */
 extern int gsi_to_vector (unsigned int gsi);
 extern int gsi_to_irq (unsigned int gsi);
 extern void iosapic_enable_intr (unsigned int vector);
@@ -94,11 +97,14 @@ extern unsigned int iosapic_version (cha
 
 extern void iosapic_pci_fixup (int);
 #ifdef CONFIG_NUMA
-extern void __init map_iosapic_to_node (unsigned int, int);
+extern void __devinit map_iosapic_to_node (unsigned int, int);
 #endif
 #else
 #define iosapic_system_init(pcat_compat)			do { } while (0)
-#define iosapic_init(address,gsi_base)				do { } while (0)
+#define iosapic_init(address,gsi_base)				(-EINVAL)
+#ifdef CONFIG_HOTPLUG
+#define iosapic_remove(gsi_base)				(-ENODEV)
+#endif /* CONFIG_HOTPLUG */
 #define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
 #define iosapic_unregister_intr(irq)				do { } while (0)
 #define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)

[PATCH] ACPI based I/O APIC hot-plug: add interfaces

[Greg KH]

[PATCH] ACPI based I/O APIC hot-plug: add interfaces

This patch adds the following new interfaces for I/O xAPIC
hotplug. The implementation of these interfaces depends on each
architecture.

    o int acpi_register_ioapic(acpi_handle handle, u64 phys_addr,
			       u32 gsi_base);

        This new interface is to add a new I/O xAPIC specified by
        phys_addr and gsi_base pair. phys_addr is the physical address
        to which the I/O xAPIC is mapped and gsi_base is global system
        interrupt base of the I/O xAPIC. acpi_register_ioapic returns
        0 on success, or negative value on error.

    o int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);

        This new interface is to remove a I/O xAPIC specified by
        gsi_base. acpi_unregister_ioapic returns 0 on success, or
        negative value on error.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit b1bb248a5d2230a3d8ef42199c742194a8580b15
tree 5335d22256e1c6f755f7aff01432ed2d5d722c9b
parent 8d50e332c8bd4f4e8cc76e8ed7326aa6f18182aa
author Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Thu, 28 Apr 2005 00:25:58 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:44 -0700

 arch/i386/kernel/acpi/boot.c |   16 ++++++++++++++++
 arch/ia64/kernel/acpi.c      |   17 +++++++++++++++++
 include/linux/acpi.h         |    3 +++
 3 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -507,6 +507,22 @@ acpi_unmap_lsapic(int cpu)
 EXPORT_SYMBOL(acpi_unmap_lsapic);
 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
 
+int
+acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int
+acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
 static unsigned long __init
 acpi_scan_rsdp (
 	unsigned long		start,
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -825,4 +825,21 @@ acpi_map_iosapic (acpi_handle handle, u3
 	return AE_OK;
 }
 #endif /* CONFIG_NUMA */
+
+int
+acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int
+acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
 #endif /* CONFIG_ACPI_BOOT */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -407,6 +407,9 @@ int acpi_map_lsapic(acpi_handle handle, 
 int acpi_unmap_lsapic(int cpu);
 #endif /* CONFIG_ACPI_HOTPLUG_CPU */
 
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
+
 extern int acpi_mp_config;
 
 extern u32 pci_mmcfg_base_addr;

[PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch

[Greg KH]

[PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch

This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch
which is in 2.6.12-rc4-mm1.

It fixes the patch to work on PPC iSeries, removes some debug printks
at Ben's request, and incorporates your
fix-pci-mmap-on-ppc-and-ppc64-fix.patch also.

Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch was discussed at length on linux-pci and so far, the last
iteration of it didn't raise any comment.  It's effect is a nop on
architecture that don't define the new pci_resource_to_user() callback
anyway.  It allows architecture like ppc who put weird things inside of
PCI resource structures to convert to some different value for user
visible ones.  It also fixes mmap'ing of IO space on those archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 2311b1f2bbd36fa5f366a7448c718b2556e0f02c
tree 10e836c5c34893f8098464a5ae15aba351a7bb2a
parent a0d399a808916d22c1c222c6b5ca4e8edd6d91a9
author Michael Ellerman <michael@ellerman.id.au> Fri, 13 May 2005 17:44:10 +1000
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:45 -0700

 arch/ppc/kernel/pci.c   |   21 +++++++++++++++++++--
 arch/ppc64/kernel/pci.c |   22 ++++++++++++++++++++--
 drivers/pci/pci-sysfs.c |   26 +++++++++++++++++++++-----
 drivers/pci/proc.c      |   14 ++++++++++----
 include/asm-ppc/pci.h   |    6 ++++++
 include/asm-ppc64/pci.h |    7 +++++++
 include/linux/pci.h     |   14 ++++++++++++++
 7 files changed, 97 insertions(+), 13 deletions(-)

diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -1495,7 +1495,7 @@ static struct resource *__pci_mmap_make_
 		*offset += hose->pci_mem_offset;
 		res_bit = IORESOURCE_MEM;
 	} else {
-		io_offset = (unsigned long)hose->io_base_virt;
+		io_offset = hose->io_base_virt - ___IO_BASE;
 		*offset += io_offset;
 		res_bit = IORESOURCE_IO;
 	}
@@ -1522,7 +1522,7 @@ static struct resource *__pci_mmap_make_
 
 		/* found it! construct the final physical address */
 		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - _IO_BASE;
+			*offset += hose->io_base_phys - io_offset;
 		return rp;
 	}
 
@@ -1739,6 +1739,23 @@ long sys_pciconfig_iobase(long which, un
 	return result;
 }
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  u64 *start, u64 *end)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+	unsigned long offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+
+	*start = rsrc->start + offset;
+	*end = rsrc->end + offset;
+}
+
 void __init
 pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
 		  int flags, char *name)
diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c
--- a/arch/ppc64/kernel/pci.c
+++ b/arch/ppc64/kernel/pci.c
@@ -351,7 +351,7 @@ static struct resource *__pci_mmap_make_
 		*offset += hose->pci_mem_offset;
 		res_bit = IORESOURCE_MEM;
 	} else {
-		io_offset = (unsigned long)hose->io_base_virt;
+		io_offset = (unsigned long)hose->io_base_virt - pci_io_base;
 		*offset += io_offset;
 		res_bit = IORESOURCE_IO;
 	}
@@ -378,7 +378,7 @@ static struct resource *__pci_mmap_make_
 
 		/* found it! construct the final physical address */
 		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - io_offset;
+		       	*offset += hose->io_base_phys - io_offset;
 		return rp;
 	}
 
@@ -944,4 +944,22 @@ int pci_read_irq_line(struct pci_dev *pc
 }
 EXPORT_SYMBOL(pci_read_irq_line);
 
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  u64 *start, u64 *end)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned long offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = pci_io_base - (unsigned long)hose->io_base_virt +
+			hose->io_base_phys;
+
+	*start = rsrc->start + offset;
+	*end = rsrc->end + offset;
+}
+
 #endif /* CONFIG_PPC_MULTIPLATFORM */
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -60,15 +60,18 @@ resource_show(struct device * dev, struc
 	char * str = buf;
 	int i;
 	int max = 7;
+	u64 start, end;
 
 	if (pci_dev->subordinate)
 		max = DEVICE_COUNT_RESOURCE;
 
 	for (i = 0; i < max; i++) {
-		str += sprintf(str,"0x%016lx 0x%016lx 0x%016lx\n",
-			       pci_resource_start(pci_dev,i),
-			       pci_resource_end(pci_dev,i),
-			       pci_resource_flags(pci_dev,i));
+		struct resource *res =  &pci_dev->resource[i];
+		pci_resource_to_user(pci_dev, i, res, &start, &end);
+		str += sprintf(str,"0x%016llx 0x%016llx 0x%016llx\n",
+			       (unsigned long long)start,
+			       (unsigned long long)end,
+			       (unsigned long long)res->flags);
 	}
 	return (str - buf);
 }
@@ -313,8 +316,21 @@ pci_mmap_resource(struct kobject *kobj, 
 						       struct device, kobj));
 	struct resource *res = (struct resource *)attr->private;
 	enum pci_mmap_state mmap_type;
+	u64 start, end;
+	int i;
 
-	vma->vm_pgoff += res->start >> PAGE_SHIFT;
+	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+		if (res == &pdev->resource[i])
+			break;
+	if (i >= PCI_ROM_RESOURCE)
+		return -ENODEV;
+
+	/* pci_mmap_page_range() expects the same kind of entry as coming
+	 * from /proc/bus/pci/ which is a "user visible" value. If this is
+	 * different from the resource itself, arch will do necessary fixup.
+	 */
+	pci_resource_to_user(pdev, i, res, &start, &end);
+	vma->vm_pgoff += start >> PAGE_SHIFT;
 	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
 
 	return pci_mmap_page_range(pdev, vma, mmap_type, 0);
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -355,14 +355,20 @@ static int show_device(struct seq_file *
 			dev->device,
 			dev->irq);
 	/* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
-	for(i=0; i<7; i++)
+	for (i=0; i<7; i++) {
+		u64 start, end;
+		pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
 		seq_printf(m, LONG_FORMAT,
-			dev->resource[i].start |
+			((unsigned long)start) |
 			(dev->resource[i].flags & PCI_REGION_FLAG_MASK));
-	for(i=0; i<7; i++)
+	}
+	for (i=0; i<7; i++) {
+		u64 start, end;
+		pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
 		seq_printf(m, LONG_FORMAT,
 			dev->resource[i].start < dev->resource[i].end ?
-			dev->resource[i].end - dev->resource[i].start + 1 : 0);
+			(unsigned long)(end - start) + 1 : 0);
+	}
 	seq_putc(m, '\t');
 	if (drv)
 		seq_printf(m, "%s", drv->name);
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
--- a/include/asm-ppc/pci.h
+++ b/include/asm-ppc/pci.h
@@ -103,6 +103,12 @@ extern pgprot_t	pci_phys_mem_access_prot
 					 unsigned long size,
 					 pgprot_t prot);
 
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 u64 *start, u64 *end);
+
+
 #endif	/* __KERNEL__ */
 
 #endif /* __PPC_PCI_H */
diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h
--- a/include/asm-ppc64/pci.h
+++ b/include/asm-ppc64/pci.h
@@ -136,6 +136,13 @@ extern pgprot_t	pci_phys_mem_access_prot
 					 unsigned long size,
 					 pgprot_t prot);
 
+#ifdef CONFIG_PPC_MULTIPLATFORM
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 u64 *start, u64 *end);
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
 
 #endif	/* __KERNEL__ */
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1020,6 +1020,20 @@ static inline char *pci_name(struct pci_
 #define pci_pretty_name(dev) ""
 #endif
 
+
+/* Some archs don't want to expose struct resource to userland as-is
+ * in sysfs and /proc
+ */
+#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
+static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
+                const struct resource *rsrc, u64 *start, u64 *end)
+{
+	*start = rsrc->start;
+	*end = rsrc->end;
+}
+#endif /* HAVE_ARCH_PCI_RESOURCE_TO_USER */
+
+
 /*
  *  The world is not perfect and supplies us with broken PCI devices.
  *  For at least a part of these bugs we need a work-around, so both

[PATCH] ACPI based I/O APIC hot-plug: acpiphp support

[Greg KH]

[PATCH] ACPI based I/O APIC hot-plug: acpiphp support

This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP
driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs
under the root bridge are hot-added by this patch. Hot-remove support
is TBD.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit a0d399a808916d22c1c222c6b5ca4e8edd6d91a9
tree 4c4f41d86652c7783cd5900605f36344253d3ef1
parent 0e888adc41ffc02b700ade715c182a17e766af84
author Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Thu, 28 Apr 2005 00:25:59 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:45 -0700

 drivers/pci/hotplug/acpiphp_glue.c |  127 ++++++++++++++++++++++++++++++++++++
 include/linux/pci_ids.h            |    2 +
 2 files changed, 129 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -552,6 +552,132 @@ static void remove_bridge(acpi_handle ha
 	}
 }
 
+static struct pci_dev * get_apic_pci_info(acpi_handle handle)
+{
+	struct acpi_pci_id id;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+
+	if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
+		return NULL;
+
+	bus = pci_find_bus(id.segment, id.bus);
+	if (!bus)
+		return NULL;
+
+	dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
+	if (!dev)
+		return NULL;
+
+	if ((dev->class != PCI_CLASS_SYSTEM_PIC_IOAPIC) &&
+	    (dev->class != PCI_CLASS_SYSTEM_PIC_IOXAPIC))
+	{
+		pci_dev_put(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int get_gsi_base(acpi_handle handle, u32 *gsi_base)
+{
+	acpi_status status;
+	int result = -1;
+	unsigned long gsb;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *obj;
+	void *table;
+
+	status = acpi_evaluate_integer(handle, "_GSB", NULL, &gsb);
+	if (ACPI_SUCCESS(status)) {
+		*gsi_base = (u32)gsb;
+		return 0;
+	}
+
+	status = acpi_evaluate_object(handle, "_MAT", NULL, &buffer);
+	if (ACPI_FAILURE(status) || !buffer.length || !buffer.pointer)
+		return -1;
+
+	obj = buffer.pointer;
+	if (obj->type != ACPI_TYPE_BUFFER)
+		goto out;
+
+	table = obj->buffer.pointer;
+	switch (((acpi_table_entry_header *)table)->type) {
+	case ACPI_MADT_IOSAPIC:
+		*gsi_base = ((struct acpi_table_iosapic *)table)->global_irq_base;
+		result = 0;
+		break;
+	case ACPI_MADT_IOAPIC:
+		*gsi_base = ((struct acpi_table_ioapic *)table)->global_irq_base;
+		result = 0;
+		break;
+	default:
+		break;
+	}
+ out:
+	acpi_os_free(buffer.pointer);
+	return result;
+}
+
+static acpi_status
+ioapic_add(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	acpi_status status;
+	unsigned long sta;
+	acpi_handle tmp;
+	struct pci_dev *pdev;
+	u32 gsi_base;
+	u64 phys_addr;
+
+	/* Evaluate _STA if present */
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+	if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL)
+		return AE_CTRL_DEPTH;
+
+	/* Scan only PCI bus scope */
+	status = acpi_get_handle(handle, "_HID", &tmp);
+	if (ACPI_SUCCESS(status))
+		return AE_CTRL_DEPTH;
+
+	if (get_gsi_base(handle, &gsi_base))
+		return AE_OK;
+
+	pdev = get_apic_pci_info(handle);
+	if (!pdev)
+		return AE_OK;
+
+	if (pci_enable_device(pdev)) {
+		pci_dev_put(pdev);
+		return AE_OK;
+	}
+
+	pci_set_master(pdev);
+
+	if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)")) {
+		pci_disable_device(pdev);
+		pci_dev_put(pdev);
+		return AE_OK;
+	}
+
+	phys_addr = pci_resource_start(pdev, 0);
+	if (acpi_register_ioapic(handle, phys_addr, gsi_base)) {
+		pci_release_region(pdev, 0);
+		pci_disable_device(pdev);
+		pci_dev_put(pdev);
+		return AE_OK;
+	}
+
+	return AE_OK;
+}
+
+static int acpiphp_configure_ioapics(acpi_handle handle)
+{
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+			    ACPI_UINT32_MAX, ioapic_add, NULL, NULL);
+	return 0;
+}
+
 static int power_on_slot(struct acpiphp_slot *slot)
 {
 	acpi_status status;
@@ -942,6 +1068,7 @@ static int acpiphp_configure_bridge (acp
 	acpiphp_sanitize_bus(bus);
 	acpiphp_set_hpp_values(handle, bus);
 	pci_enable_bridges(bus);
+	acpiphp_configure_ioapics(handle);
 	return 0;
 }
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -62,6 +62,8 @@
 
 #define PCI_BASE_CLASS_SYSTEM		0x08
 #define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_PIC_IOAPIC	0x080010
+#define PCI_CLASS_SYSTEM_PIC_IOXAPIC	0x080020
 #define PCI_CLASS_SYSTEM_DMA		0x0801
 #define PCI_CLASS_SYSTEM_TIMER		0x0802
 #define PCI_CLASS_SYSTEM_RTC		0x0803

[PATCH] PCI: DMA bursting advice

[Greg KH]

[PATCH] PCI: DMA bursting advice

After seeing, at best, "guesses" as to the following kind
of information in several drivers, I decided that we really
need a way for platforms to specifically give advice in this
area for what works best with their PCI controller implementation.

Basically, this new interface gives DMA bursting advice on
PCI.  There are three forms of the advice:

1) Burst as much as possible, it is not necessary to end bursts
   on some particular boundary for best performance.

2) Burst on some byte count multiple.  A DMA burst to some multiple of
   number of bytes may be done, but it is important to end the burst
   on an exact multiple for best performance.

   The best example of this I am aware of are the PPC64 PCI
   controllers, where if you end a burst mid-cacheline then
   chip has to refetch the data and the IOMMU translations
   which hurts performance a lot.

3) Burst on a single byte count multiple.  Bursts shall end
   exactly on the next multiple boundary for best performance.

   Sparc64 and Alpha's PCI controllers operate this way.  They
   disconnect any device which tries to burst across a cacheline
   boundary.

   Actually, newer sparc64 PCI controllers do not have this behavior.
   That is why the "pdev" is passed into the interface, so I can
   add code later to check which PCI controller the system is using
   and give advice accordingly.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit e24c2d963a604d9eaa560c90371fa387d3eec8f1
tree 66be193d59dd22fac0b62980769c4f19e045b5a2
parent 2311b1f2bbd36fa5f366a7448c718b2556e0f02c
author David S. Miller <davem@davemloft.net> Thu, 02 Jun 2005 12:55:50 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:45 -0700

 include/asm-alpha/pci.h   |   17 +++++++++++++++++
 include/asm-arm/pci.h     |    8 ++++++++
 include/asm-frv/pci.h     |    8 ++++++++
 include/asm-i386/pci.h    |    8 ++++++++
 include/asm-ia64/pci.h    |   17 +++++++++++++++++
 include/asm-mips/pci.h    |    8 ++++++++
 include/asm-parisc/pci.h  |   17 +++++++++++++++++
 include/asm-ppc/pci.h     |    8 ++++++++
 include/asm-ppc64/pci.h   |   17 +++++++++++++++++
 include/asm-sh/pci.h      |    8 ++++++++
 include/asm-sh64/pci.h    |    8 ++++++++
 include/asm-sparc/pci.h   |    8 ++++++++
 include/asm-sparc64/pci.h |   17 +++++++++++++++++
 include/asm-v850/pci.h    |    8 ++++++++
 include/asm-x86_64/pci.h  |    8 ++++++++
 include/linux/pci.h       |    9 +++++++++
 16 files changed, 174 insertions(+), 0 deletions(-)

diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -223,6 +223,23 @@ pci_dac_dma_sync_single_for_device(struc
 	/* Nothing to do. */
 }
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+
 /* TODO: integrate with include/asm-generic/pci.h ? */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
--- a/include/asm-arm/pci.h
+++ b/include/asm-arm/pci.h
@@ -42,6 +42,14 @@ static inline void pcibios_penalize_isa_
 #define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
                                enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h
--- a/include/asm-frv/pci.h
+++ b/include/asm-frv/pci.h
@@ -57,6 +57,14 @@ extern void pci_free_consistent(struct p
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 /*
  *	These are pretty much arbitary with the CoMEM implementation.
  *	We have the whole address space to ourselves.
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -99,6 +99,14 @@ static inline void pcibios_add_platform_
 {
 }
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 #endif /* __KERNEL__ */
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
--- a/include/asm-ia64/pci.h
+++ b/include/asm-ia64/pci.h
@@ -82,6 +82,23 @@ extern int pcibios_prep_mwi (struct pci_
 #define sg_dma_len(sg)		((sg)->dma_length)
 #define sg_dma_address(sg)	((sg)->dma_address)
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
 				enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -130,6 +130,14 @@ extern void pci_dac_dma_sync_single_for_
 extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
 	dma64_addr_t dma_addr, size_t len, int direction);
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 extern void pcibios_resource_to_bus(struct pci_dev *dev,
 	struct pci_bus_region *region, struct resource *res);
 
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -230,6 +230,23 @@ extern inline void pcibios_register_hba(
 /* export the pci_ DMA API in terms of the dma_ one */
 #include <asm-generic/pci-dma-compat.h>
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+
 extern void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res);
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
--- a/include/asm-ppc/pci.h
+++ b/include/asm-ppc/pci.h
@@ -69,6 +69,14 @@ extern unsigned long pci_bus_to_phys(uns
 #define pci_unmap_len(PTR, LEN_NAME)		(0)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 /*
  * At present there are very few 32-bit PPC machines that can have
  * memory above the 4GB point, and we don't support that.
diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h
--- a/include/asm-ppc64/pci.h
+++ b/include/asm-ppc64/pci.h
@@ -78,6 +78,23 @@ static inline int pci_dac_dma_supported(
 	return 0;
 }
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+
 extern int pci_domain_nr(struct pci_bus *bus);
 
 /* Decide whether to display the domain number in /proc */
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -96,6 +96,14 @@ static inline void pcibios_penalize_isa_
 #define sg_dma_address(sg)	(virt_to_bus((sg)->dma_address))
 #define sg_dma_len(sg)		((sg)->length)
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 /* Board-specific fixup routines. */
 extern void pcibios_fixup(void);
 extern void pcibios_fixup_irqs(void);
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
--- a/include/asm-sh64/pci.h
+++ b/include/asm-sh64/pci.h
@@ -86,6 +86,14 @@ static inline void pcibios_penalize_isa_
 #define sg_dma_address(sg)	((sg)->dma_address)
 #define sg_dma_len(sg)		((sg)->length)
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 /* Board-specific fixup routines. */
 extern void pcibios_fixup(void);
 extern void pcibios_fixup_irqs(void);
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
--- a/include/asm-sparc/pci.h
+++ b/include/asm-sparc/pci.h
@@ -144,6 +144,14 @@ extern inline int pci_dma_supported(stru
 
 #define pci_dac_dma_supported(dev, mask)	(0)
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 static inline void pcibios_add_platform_entries(struct pci_dev *dev)
 {
 }
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -220,6 +220,23 @@ static inline int pci_dma_mapping_error(
 	return (dma_addr == PCI_DMA_ERROR_CODE);
 }
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+
 /* Return the index of the PCI controller for device PDEV. */
 
 extern int pci_domain_nr(struct pci_bus *bus);
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
--- a/include/asm-v850/pci.h
+++ b/include/asm-v850/pci.h
@@ -81,6 +81,14 @@ extern void
 pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
 		     dma_addr_t dma_addr);
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 static inline void pcibios_add_platform_entries(struct pci_dev *dev)
 {
 }
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -123,6 +123,14 @@ pci_dac_dma_sync_single_for_device(struc
 	flush_write_buffers();
 }
 
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       enum pci_mmap_state mmap_state, int write_combine);
diff --git a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -874,6 +874,15 @@ int pci_scan_bridge(struct pci_bus *bus,
 #define	pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
 #define	pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
 
+enum pci_dma_burst_strategy {
+	PCI_DMA_BURST_INFINITY,	/* make bursts as large as possible,
+				   strategy_parameter is N/A */
+	PCI_DMA_BURST_BOUNDARY, /* disconnect at every strategy_parameter
+				   byte boundaries */
+	PCI_DMA_BURST_MULTIPLE, /* disconnect at some multiple of
+				   strategy_parameter byte boundaries */
+};
+
 #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
 extern struct pci_dev *isa_bridge;
 #endif

[PATCH] cpqphp: fix oops during unload without probe

[Greg KH]

[PATCH] cpqphp: fix oops during unload without probe

drivers/pci/hotplug/cpqphp_core.c calls cpqphp_event_start_thread()
in one_time_init(), which is called whenever the hardware is probed.
Unfortunately, cpqphp_event_stop_thread() is *always* called when
the module is unloaded. If the hardware is never probed, then
cpqphp_event_stop_thread() tries to manipulate a couple of
uninitialized mutexes.

Signed-off-by: Keith Moore <keithmo@exmsft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 4002307d2b563a6ab317ca4d7eb1d201a6673d37
tree a95936bd9f9180eeaac3c41fae0baaf878486a2d
parent 70549ad9cf074e12f12cdc931b29b2616dfb873a
author Keith Moore <keithmo@exmsft.com> Thu, 02 Jun 2005 12:42:37 +0200
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:46 -0700

 drivers/pci/hotplug/cpqphp_core.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -60,6 +60,7 @@ static void __iomem *smbios_start;
 static void __iomem *cpqhp_rom_start;
 static int power_mode;
 static int debug;
+static int initialized;
 
 #define DRIVER_VERSION	"0.9.8"
 #define DRIVER_AUTHOR	"Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
@@ -1271,7 +1272,6 @@ static int one_time_init(void)
 {
 	int loop;
 	int retval = 0;
-	static int initialized = 0;
 
 	if (initialized)
 		return 0;
@@ -1441,7 +1441,8 @@ static void __exit unload_cpqphpd(void)
 	}
 
 	// Stop the notification mechanism
-	cpqhp_event_stop_thread();
+	if (initialized)
+		cpqhp_event_stop_thread();
 
 	//unmap the rom address
 	if (cpqhp_rom_start)

[PATCH] PCI: clean up the MSI code a bit.

[Greg KH]

[PATCH] PCI: clean up the MSI code a bit.

Mostly just cleans up the irq handling logic to be smaller and a bit more
descriptive as to what it really does.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 70549ad9cf074e12f12cdc931b29b2616dfb873a
tree dde5cdc320df87f1eee4b6ef94146dd741a31d14
parent bb4a61b6eaee01707f24deeefc5d7136f25f75c5
author Greg Kroah-Hartman <gregkh@suse.de> Mon, 06 Jun 2005 23:07:46 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:46 -0700

 drivers/pci/msi.c |   88 ++++++++++++++++++++---------------------------------
 drivers/pci/msi.h |    9 ++---
 2 files changed, 37 insertions(+), 60 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -28,10 +28,10 @@ static struct msi_desc* msi_desc[NR_IRQS
 static kmem_cache_t* msi_cachep;
 
 static int pci_msi_enable = 1;
-static int last_alloc_vector = 0;
-static int nr_released_vectors = 0;
+static int last_alloc_vector;
+static int nr_released_vectors;
 static int nr_reserved_vectors = NR_HP_RESERVED_VECTORS;
-static int nr_msix_devices = 0;
+static int nr_msix_devices;
 
 #ifndef CONFIG_X86_IO_APIC
 int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
@@ -170,44 +170,30 @@ static unsigned int startup_msi_irq_wo_m
 	return 0;	/* never anything pending */
 }
 
-static void release_msi(unsigned int vector);
-static void shutdown_msi_irq(unsigned int vector)
-{
-	release_msi(vector);
-}
-
-#define shutdown_msi_irq_wo_maskbit	shutdown_msi_irq
-static void enable_msi_irq_wo_maskbit(unsigned int vector) {}
-static void disable_msi_irq_wo_maskbit(unsigned int vector) {}
-static void ack_msi_irq_wo_maskbit(unsigned int vector) {}
-static void end_msi_irq_wo_maskbit(unsigned int vector)
+static unsigned int startup_msi_irq_w_maskbit(unsigned int vector)
 {
-	move_msi(vector);
-	ack_APIC_irq();
+	startup_msi_irq_wo_maskbit(vector);
+	unmask_MSI_irq(vector);
+	return 0;	/* never anything pending */
 }
 
-static unsigned int startup_msi_irq_w_maskbit(unsigned int vector)
+static void shutdown_msi_irq(unsigned int vector)
 {
 	struct msi_desc *entry;
 	unsigned long flags;
 
 	spin_lock_irqsave(&msi_lock, flags);
 	entry = msi_desc[vector];
-	if (!entry || !entry->dev) {
-		spin_unlock_irqrestore(&msi_lock, flags);
-		return 0;
-	}
-	entry->msi_attrib.state = 1;	/* Mark it active */
+	if (entry && entry->dev)
+		entry->msi_attrib.state = 0;	/* Mark it not active */
 	spin_unlock_irqrestore(&msi_lock, flags);
-
-	unmask_MSI_irq(vector);
-	return 0;	/* never anything pending */
 }
 
-#define shutdown_msi_irq_w_maskbit	shutdown_msi_irq
-#define enable_msi_irq_w_maskbit	unmask_MSI_irq
-#define disable_msi_irq_w_maskbit	mask_MSI_irq
-#define ack_msi_irq_w_maskbit		mask_MSI_irq
+static void end_msi_irq_wo_maskbit(unsigned int vector)
+{
+	move_msi(vector);
+	ack_APIC_irq();
+}
 
 static void end_msi_irq_w_maskbit(unsigned int vector)
 {
@@ -216,6 +202,10 @@ static void end_msi_irq_w_maskbit(unsign
 	ack_APIC_irq();
 }
 
+static void do_nothing(unsigned int vector)
+{
+}
+
 /*
  * Interrupt Type for MSI-X PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI-X Capability Structure.
@@ -223,10 +213,10 @@ static void end_msi_irq_w_maskbit(unsign
 static struct hw_interrupt_type msix_irq_type = {
 	.typename	= "PCI-MSI-X",
 	.startup	= startup_msi_irq_w_maskbit,
-	.shutdown	= shutdown_msi_irq_w_maskbit,
-	.enable		= enable_msi_irq_w_maskbit,
-	.disable	= disable_msi_irq_w_maskbit,
-	.ack		= ack_msi_irq_w_maskbit,
+	.shutdown	= shutdown_msi_irq,
+	.enable		= unmask_MSI_irq,
+	.disable	= mask_MSI_irq,
+	.ack		= mask_MSI_irq,
 	.end		= end_msi_irq_w_maskbit,
 	.set_affinity	= set_msi_irq_affinity
 };
@@ -239,10 +229,10 @@ static struct hw_interrupt_type msix_irq
 static struct hw_interrupt_type msi_irq_w_maskbit_type = {
 	.typename	= "PCI-MSI",
 	.startup	= startup_msi_irq_w_maskbit,
-	.shutdown	= shutdown_msi_irq_w_maskbit,
-	.enable		= enable_msi_irq_w_maskbit,
-	.disable	= disable_msi_irq_w_maskbit,
-	.ack		= ack_msi_irq_w_maskbit,
+	.shutdown	= shutdown_msi_irq,
+	.enable		= unmask_MSI_irq,
+	.disable	= mask_MSI_irq,
+	.ack		= mask_MSI_irq,
 	.end		= end_msi_irq_w_maskbit,
 	.set_affinity	= set_msi_irq_affinity
 };
@@ -255,10 +245,10 @@ static struct hw_interrupt_type msi_irq_
 static struct hw_interrupt_type msi_irq_wo_maskbit_type = {
 	.typename	= "PCI-MSI",
 	.startup	= startup_msi_irq_wo_maskbit,
-	.shutdown	= shutdown_msi_irq_wo_maskbit,
-	.enable		= enable_msi_irq_wo_maskbit,
-	.disable	= disable_msi_irq_wo_maskbit,
-	.ack		= ack_msi_irq_wo_maskbit,
+	.shutdown	= shutdown_msi_irq,
+	.enable		= do_nothing,
+	.disable	= do_nothing,
+	.ack		= do_nothing,
 	.end		= end_msi_irq_wo_maskbit,
 	.set_affinity	= set_msi_irq_affinity
 };
@@ -407,7 +397,7 @@ static struct msi_desc* alloc_msi_entry(
 {
 	struct msi_desc *entry;
 
-	entry = (struct msi_desc*) kmem_cache_alloc(msi_cachep, SLAB_KERNEL);
+	entry = kmem_cache_alloc(msi_cachep, SLAB_KERNEL);
 	if (!entry)
 		return NULL;
 
@@ -796,18 +786,6 @@ void pci_disable_msi(struct pci_dev* dev
 	}
 }
 
-static void release_msi(unsigned int vector)
-{
-	struct msi_desc *entry;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msi_lock, flags);
-	entry = msi_desc[vector];
-	if (entry && entry->dev)
-		entry->msi_attrib.state = 0;	/* Mark it not active */
-	spin_unlock_irqrestore(&msi_lock, flags);
-}
-
 static int msi_free_vector(struct pci_dev* dev, int vector, int reassign)
 {
 	struct msi_desc *entry;
@@ -924,7 +902,7 @@ static int reroute_msix_table(int head, 
 /**
  * pci_enable_msix - configure device's MSI-X capability structure
  * @dev: pointer to the pci_dev data structure of MSI-X device function
- * @data: pointer to an array of MSI-X entries
+ * @entries: pointer to an array of MSI-X entries
  * @nvec: number of MSI-X vectors requested for allocation by device driver
  *
  * Setup the MSI-X capability structure of device function with the number
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -41,11 +41,11 @@ static inline void move_msi(int vector) 
 #define PCI_MSIX_FLAGS_BIRMASK		(7 << 0)
 #define PCI_MSIX_FLAGS_BITMASK		(1 << 0)
 
-#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
-#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
-#define PCI_MSIX_ENTRY_DATA_OFFSET		8
-#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET	12
 #define PCI_MSIX_ENTRY_SIZE			16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET	4
+#define  PCI_MSIX_ENTRY_DATA_OFFSET		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET	12
 
 #define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
 #define msi_lower_address_reg(base)	(base + PCI_MSI_ADDRESS_LO)
@@ -64,7 +64,6 @@ static inline void move_msi(int vector) 
 #define msi_enable(control, num) multi_msi_enable(control, num); \
 	control |= PCI_MSI_FLAGS_ENABLE
 
-#define msix_control_reg		msi_control_reg
 #define msix_table_offset_reg(base)	(base + 0x04)
 #define msix_pba_offset_reg(base)	(base + 0x08)
 #define msix_enable(control)	 	control |= PCI_MSIX_FLAGS_ENABLE

[PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n

[Greg KH]

[PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n

With CONFIG_PCI=n:

In file included from include/linux/pci.h:917,
                 from lib/iomap.c:6:
include/asm/pci.h:104: warning: `enum pci_dma_burst_strategy' declared inside parameter list
include/asm/pci.h:104: warning: its scope is only this definition or declaration, which is probably not what you want.
include/asm/pci.h: In function `pci_dma_burst_advice':
include/asm/pci.h:106: dereferencing pointer to incomplete type
include/asm/pci.h:106: `PCI_DMA_BURST_INFINITY' undeclared (first use in this function)
include/asm/pci.h:106: (Each undeclared identifier is reported only once
include/asm/pci.h:106: for each function it appears in.)
make[1]: *** [lib/iomap.o] Error 1

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit bb4a61b6eaee01707f24deeefc5d7136f25f75c5
tree 8d353d7b04addad950de8ae24eda7cdfe6fbea85
parent e24c2d963a604d9eaa560c90371fa387d3eec8f1
author Andrew Morton <akpm@osdl.org> Mon, 06 Jun 2005 23:07:46 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:46 -0700

 include/asm-alpha/pci.h   |    2 ++
 include/asm-arm/pci.h     |    2 ++
 include/asm-frv/pci.h     |    2 ++
 include/asm-i386/pci.h    |    2 ++
 include/asm-ia64/pci.h    |    2 ++
 include/asm-mips/pci.h    |    2 ++
 include/asm-parisc/pci.h  |    2 ++
 include/asm-ppc/pci.h     |    2 ++
 include/asm-ppc64/pci.h   |    2 ++
 include/asm-sh/pci.h      |    2 ++
 include/asm-sh64/pci.h    |    2 ++
 include/asm-sparc/pci.h   |    2 ++
 include/asm-sparc64/pci.h |    2 ++
 include/asm-v850/pci.h    |    2 ++
 include/asm-x86_64/pci.h  |    2 ++
 include/linux/pci.h       |    2 ++
 16 files changed, 32 insertions(+), 0 deletions(-)

diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -223,6 +223,7 @@ pci_dac_dma_sync_single_for_device(struc
 	/* Nothing to do. */
 }
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -239,6 +240,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_BOUNDARY;
 	*strategy_parameter = cacheline_size;
 }
+#endif
 
 /* TODO: integrate with include/asm-generic/pci.h ? */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
--- a/include/asm-arm/pci.h
+++ b/include/asm-arm/pci.h
@@ -42,6 +42,7 @@ static inline void pcibios_penalize_isa_
 #define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -49,6 +50,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h
--- a/include/asm-frv/pci.h
+++ b/include/asm-frv/pci.h
@@ -57,6 +57,7 @@ extern void pci_free_consistent(struct p
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -64,6 +65,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 /*
  *	These are pretty much arbitary with the CoMEM implementation.
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -99,6 +99,7 @@ static inline void pcibios_add_platform_
 {
 }
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -106,6 +107,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 #endif /* __KERNEL__ */
 
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
--- a/include/asm-ia64/pci.h
+++ b/include/asm-ia64/pci.h
@@ -82,6 +82,7 @@ extern int pcibios_prep_mwi (struct pci_
 #define sg_dma_len(sg)		((sg)->dma_length)
 #define sg_dma_address(sg)	((sg)->dma_address)
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -98,6 +99,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_MULTIPLE;
 	*strategy_parameter = cacheline_size;
 }
+#endif
 
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -130,6 +130,7 @@ extern void pci_dac_dma_sync_single_for_
 extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
 	dma64_addr_t dma_addr, size_t len, int direction);
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -137,6 +138,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 extern void pcibios_resource_to_bus(struct pci_dev *dev,
 	struct pci_bus_region *region, struct resource *res);
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -230,6 +230,7 @@ extern inline void pcibios_register_hba(
 /* export the pci_ DMA API in terms of the dma_ one */
 #include <asm-generic/pci-dma-compat.h>
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -246,6 +247,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_MULTIPLE;
 	*strategy_parameter = cacheline_size;
 }
+#endif
 
 extern void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
--- a/include/asm-ppc/pci.h
+++ b/include/asm-ppc/pci.h
@@ -69,6 +69,7 @@ extern unsigned long pci_bus_to_phys(uns
 #define pci_unmap_len(PTR, LEN_NAME)		(0)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -76,6 +77,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 /*
  * At present there are very few 32-bit PPC machines that can have
diff --git a/include/asm-ppc64/pci.h b/include/asm-ppc64/pci.h
--- a/include/asm-ppc64/pci.h
+++ b/include/asm-ppc64/pci.h
@@ -78,6 +78,7 @@ static inline int pci_dac_dma_supported(
 	return 0;
 }
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -94,6 +95,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_MULTIPLE;
 	*strategy_parameter = cacheline_size;
 }
+#endif
 
 extern int pci_domain_nr(struct pci_bus *bus);
 
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -96,6 +96,7 @@ static inline void pcibios_penalize_isa_
 #define sg_dma_address(sg)	(virt_to_bus((sg)->dma_address))
 #define sg_dma_len(sg)		((sg)->length)
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -103,6 +104,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 /* Board-specific fixup routines. */
 extern void pcibios_fixup(void);
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
--- a/include/asm-sh64/pci.h
+++ b/include/asm-sh64/pci.h
@@ -86,6 +86,7 @@ static inline void pcibios_penalize_isa_
 #define sg_dma_address(sg)	((sg)->dma_address)
 #define sg_dma_len(sg)		((sg)->length)
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -93,6 +94,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 /* Board-specific fixup routines. */
 extern void pcibios_fixup(void);
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
--- a/include/asm-sparc/pci.h
+++ b/include/asm-sparc/pci.h
@@ -144,6 +144,7 @@ extern inline int pci_dma_supported(stru
 
 #define pci_dac_dma_supported(dev, mask)	(0)
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -151,6 +152,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 static inline void pcibios_add_platform_entries(struct pci_dev *dev)
 {
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -220,6 +220,7 @@ static inline int pci_dma_mapping_error(
 	return (dma_addr == PCI_DMA_ERROR_CODE);
 }
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -236,6 +237,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_BOUNDARY;
 	*strategy_parameter = cacheline_size;
 }
+#endif
 
 /* Return the index of the PCI controller for device PDEV. */
 
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
--- a/include/asm-v850/pci.h
+++ b/include/asm-v850/pci.h
@@ -81,6 +81,7 @@ extern void
 pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
 		     dma_addr_t dma_addr);
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -88,6 +89,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 static inline void pcibios_add_platform_entries(struct pci_dev *dev)
 {
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -123,6 +123,7 @@ pci_dac_dma_sync_single_for_device(struc
 	flush_write_buffers();
 }
 
+#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -130,6 +131,7 @@ static inline void pci_dma_burst_advice(
 	*strat = PCI_DMA_BURST_INFINITY;
 	*strategy_parameter = ~0UL;
 }
+#endif
 
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -985,6 +985,8 @@ static inline int pci_proc_domain(struct
 }
 #endif
 
+#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
+
 #endif /* !CONFIG_PCI */
 
 /* these helpers provide future and backwards compatibility

[PATCH] PCI: add proper MCFG table parsing to ACPI core.

[Greg KH]

[PATCH] PCI: add proper MCFG table parsing to ACPI core.

This patch is the first step in properly handling the MCFG PCI table.
It defines the structures properly, and saves off the table so that the
pci mmconfig code can access it.  It moves the parsing of the table a
little later in the boot process, but still before the information is
needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 545493917dc90298e1c38f018ad893f5518928e7
tree 1c809616d3113785c0f7dd3039ea3b05c99c6440
parent d18c3db58bc544fce6662ca7edba616ca9788a70
author Greg Kroah-Hartman <gregkh@suse.de> Thu, 23 Jun 2005 17:35:56 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:47 -0700

 arch/i386/kernel/acpi/boot.c |   41 +++++++++++++++++++++++++++++++++--------
 arch/i386/pci/mmconfig.c     |   12 +++++++-----
 arch/x86_64/pci/mmconfig.c   |   16 +++++++++-------
 include/linux/acpi.h         |   16 +++++++++++++---
 4 files changed, 62 insertions(+), 23 deletions(-)

diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -159,9 +159,15 @@ char *__acpi_map_table(unsigned long phy
 #endif
 
 #ifdef CONFIG_PCI_MMCONFIG
-static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
+struct acpi_table_mcfg_config *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 {
 	struct acpi_table_mcfg *mcfg;
+	unsigned long i;
+	int config_size;
 
 	if (!phys_addr || !size)
 		return -EINVAL;
@@ -172,18 +178,38 @@ static int __init acpi_parse_mcfg(unsign
 		return -ENODEV;
 	}
 
-	if (mcfg->base_reserved) {
-		printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+	/* how many config structures do we have */
+	pci_mmcfg_config_num = 0;
+	i = size - sizeof(struct acpi_table_mcfg);
+	while (i >= sizeof(struct acpi_table_mcfg_config)) {
+		++pci_mmcfg_config_num;
+		i -= sizeof(struct acpi_table_mcfg_config);
+	};
+	if (pci_mmcfg_config_num == 0) {
+		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
 		return -ENODEV;
 	}
 
-	pci_mmcfg_base_addr = mcfg->base_address;
+	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+	if (!pci_mmcfg_config) {
+		printk(KERN_WARNING PREFIX
+		       "No memory for MCFG config tables\n");
+		return -ENOMEM;
+	}
+
+	memcpy(pci_mmcfg_config, &mcfg->config, config_size);
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		if (mcfg->config[i].base_reserved) {
+			printk(KERN_ERR PREFIX
+			       "MMCONFIG not in low 4GB of memory\n");
+			return -ENODEV;
+		}
+	}
 
 	return 0;
 }
-#else
-#define	acpi_parse_mcfg NULL
-#endif /* !CONFIG_PCI_MMCONFIG */
+#endif /* CONFIG_PCI_MMCONFIG */
 
 #ifdef CONFIG_X86_LOCAL_APIC
 static int __init
@@ -1139,7 +1165,6 @@ int __init acpi_boot_init(void)
 	acpi_process_madt();
 
 	acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
-	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
 
 	return 0;
 }
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -11,11 +11,9 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-u32 pci_mmcfg_base_addr;
-
 #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
 
 /* The base address of the last MMCONFIG device accessed */
@@ -27,7 +25,7 @@ static u32 mmcfg_last_accessed_device;
 
 static inline void pci_exp_set_dev_base(int bus, int devfn)
 {
-	u32 dev_base = pci_mmcfg_base_addr | (bus << 20) | (devfn << 12);
+	u32 dev_base = pci_mmcfg_config[0].base_address | (bus << 20) | (devfn << 12);
 	if (dev_base != mmcfg_last_accessed_device) {
 		mmcfg_last_accessed_device = dev_base;
 		set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
@@ -101,7 +99,11 @@ static int __init pci_mmcfg_init(void)
 {
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		goto out;
-	if (!pci_mmcfg_base_addr)
+
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].base_address == 0))
 		goto out;
 
 	/* Kludge for now. Don't use mmconfig on AMD systems because
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -7,15 +7,13 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
 #define MMCONFIG_APER_SIZE (256*1024*1024)
 
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-u32 pci_mmcfg_base_addr;
-
 /* Static virtual mapping of the MMCONFIG aperture */
-char *pci_mmcfg_virt;
+static char *pci_mmcfg_virt;
 
 static inline char *pci_dev_base(unsigned int bus, unsigned int devfn)
 {
@@ -77,7 +75,11 @@ static int __init pci_mmcfg_init(void)
 {
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return 0;
-	if (!pci_mmcfg_base_addr)
+
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+	if ((pci_mmcfg_config_num == 0) ||
+	    (pci_mmcfg_config == NULL) ||
+	    (pci_mmcfg_config[0].base_address == 0))
 		return 0;
 
 	/* Kludge for now. Don't use mmconfig on AMD systems because
@@ -88,13 +90,13 @@ static int __init pci_mmcfg_init(void)
 		return 0; 
 
 	/* RED-PEN i386 doesn't do _nocache right now */
-	pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_base_addr, MMCONFIG_APER_SIZE);
+	pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_config[0].base_address, MMCONFIG_APER_SIZE);
 	if (!pci_mmcfg_virt) { 
 		printk("PCI: Cannot map mmconfig aperture\n");
 		return 0;
 	}	
 
-	printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_base_addr);
+	printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[0].base_address);
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
 
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -342,11 +342,19 @@ struct acpi_table_ecdt {
 
 /* PCI MMCONFIG */
 
+/* Defined in PCI Firmware Specification 3.0 */
+struct acpi_table_mcfg_config {
+	u32				base_address;
+	u32				base_reserved;
+	u16				pci_segment_group_number;
+	u8				start_bus_number;
+	u8				end_bus_number;
+	u8				reserved[4];
+} __attribute__ ((packed));
 struct acpi_table_mcfg {
 	struct acpi_table_header	header;
 	u8				reserved[8];
-	u32				base_address;
-	u32				base_reserved;
+	struct acpi_table_mcfg_config	config[0];
 } __attribute__ ((packed));
 
 /* Table Handlers */
@@ -391,6 +399,7 @@ int acpi_table_parse (enum acpi_table_id
 int acpi_get_table_header_early (enum acpi_table_id id, struct acpi_table_header **header);
 int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
 int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
+int acpi_parse_mcfg (unsigned long phys_addr, unsigned long size);
 void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr);
 void acpi_table_print_madt_entry (acpi_table_entry_header *madt);
 void acpi_table_print_srat_entry (acpi_table_entry_header *srat);
@@ -412,7 +421,8 @@ int acpi_unregister_ioapic(acpi_handle h
 
 extern int acpi_mp_config;
 
-extern u32 pci_mmcfg_base_addr;
+extern struct acpi_table_mcfg_config *pci_mmcfg_config;
+extern int pci_mmcfg_config_num;
 
 extern int sbf_port ;
 

[PATCH] PCI: make drivers use the pci shutdown callback instead of the driver core callback.

[Greg KH]

[PATCH] PCI: make drivers use the pci shutdown callback instead of the driver core callback.

Now we can change the pci core to always set this pointer, as pci drivers
should use it, not the driver core callback.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit d18c3db58bc544fce6662ca7edba616ca9788a70
tree dd4c2d2c0bef6d47a32452112a9396a3137d8c10
parent 4002307d2b563a6ab317ca4d7eb1d201a6673d37
author Greg Kroah-Hartman <gregkh@suse.de> Thu, 23 Jun 2005 17:35:56 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:47 -0700

 drivers/message/fusion/mptfc.c    |    4 +---
 drivers/message/fusion/mptscsih.c |   10 +++++-----
 drivers/message/fusion/mptscsih.h |    2 +-
 drivers/message/fusion/mptspi.c   |    4 +---
 drivers/net/e100.c                |    9 ++-------
 drivers/net/via-rhine.c           |   11 ++++-------
 drivers/scsi/3w-9xxx.c            |    8 +++-----
 drivers/scsi/3w-xxxx.c            |    8 +++-----
 drivers/scsi/ipr.c                |   10 ++++------
 drivers/scsi/megaraid.c           |    8 +++-----
 10 files changed, 27 insertions(+), 47 deletions(-)

diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -364,9 +364,7 @@ static struct pci_driver mptfc_driver = 
 	.id_table	= mptfc_pci_table,
 	.probe		= mptfc_probe,
 	.remove		= __devexit_p(mptscsih_remove),
-	.driver         = {
-		.shutdown = mptscsih_shutdown,
-        },
+	.shutdown	= mptscsih_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -170,7 +170,7 @@ static void	mptscsih_fillbuf(char *buffe
 #endif
 
 void 		mptscsih_remove(struct pci_dev *);
-void 		mptscsih_shutdown(struct device *);
+void 		mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
 int 		mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
 int 		mptscsih_resume(struct pci_dev *pdev);
@@ -988,7 +988,7 @@ mptscsih_remove(struct pci_dev *pdev)
 #endif
 #endif
 
-	mptscsih_shutdown(&pdev->dev);
+	mptscsih_shutdown(pdev);
 
 	sz1=0;
 
@@ -1026,9 +1026,9 @@ mptscsih_remove(struct pci_dev *pdev)
  *
  */
 void
-mptscsih_shutdown(struct device * dev)
+mptscsih_shutdown(struct pci_dev *pdev)
 {
-	MPT_ADAPTER 		*ioc = pci_get_drvdata(to_pci_dev(dev));
+	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
 	struct Scsi_Host 	*host = ioc->sh;
 	MPT_SCSI_HOST		*hd;
 
@@ -1054,7 +1054,7 @@ mptscsih_shutdown(struct device * dev)
 int
 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
 {
-	mptscsih_shutdown(&pdev->dev);
+	mptscsih_shutdown(pdev);
 	return mpt_suspend(pdev,state);
 }
 
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -82,7 +82,7 @@
 #endif
 
 extern void mptscsih_remove(struct pci_dev *);
-extern void mptscsih_shutdown(struct device *);
+extern void mptscsih_shutdown(struct pci_dev *);
 #ifdef CONFIG_PM
 extern int mptscsih_suspend(struct pci_dev *pdev, u32 state);
 extern int mptscsih_resume(struct pci_dev *pdev);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -419,9 +419,7 @@ static struct pci_driver mptspi_driver =
 	.id_table	= mptspi_pci_table,
 	.probe		= mptspi_probe,
 	.remove		= __devexit_p(mptscsih_remove),
-	.driver         = {
-		.shutdown = mptscsih_shutdown,
-        },
+	.shutdown	= mptscsih_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
 	.resume		= mptscsih_resume,
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2440,9 +2440,8 @@ static int e100_resume(struct pci_dev *p
 #endif
 
 
-static void e100_shutdown(struct device *dev)
+static void e100_shutdown(struct pci_dev *pdev)
 {
-	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct nic *nic = netdev_priv(netdev);
 
@@ -2463,11 +2462,7 @@ static struct pci_driver e100_driver = {
 	.suspend =      e100_suspend,
 	.resume =       e100_resume,
 #endif
-
-	.driver = {
-		.shutdown = e100_shutdown,
-	}
-
+	.shutdown =	e100_shutdown,
 };
 
 static int __init e100_init_module(void)
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -507,7 +507,7 @@ static struct net_device_stats *rhine_ge
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static struct ethtool_ops netdev_ethtool_ops;
 static int  rhine_close(struct net_device *dev);
-static void rhine_shutdown (struct device *gdev);
+static void rhine_shutdown (struct pci_dev *pdev);
 
 #define RHINE_WAIT_FOR(condition) do {					\
 	int i=1024;							\
@@ -1895,9 +1895,8 @@ static void __devexit rhine_remove_one(s
 	pci_set_drvdata(pdev, NULL);
 }
 
-static void rhine_shutdown (struct device *gendev)
+static void rhine_shutdown (struct pci_dev *pdev)
 {
-	struct pci_dev *pdev = to_pci_dev(gendev);
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
@@ -1956,7 +1955,7 @@ static int rhine_suspend(struct pci_dev 
 	pci_save_state(pdev);
 
 	spin_lock_irqsave(&rp->lock, flags);
-	rhine_shutdown(&pdev->dev);
+	rhine_shutdown(pdev);
 	spin_unlock_irqrestore(&rp->lock, flags);
 
 	free_irq(dev->irq, dev);
@@ -2010,9 +2009,7 @@ static struct pci_driver rhine_driver = 
 	.suspend	= rhine_suspend,
 	.resume		= rhine_resume,
 #endif /* CONFIG_PM */
-	.driver = {
-		.shutdown = rhine_shutdown,
-	}
+	.shutdown =	rhine_shutdown,
 };
 
 
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1916,9 +1916,9 @@ static void __twa_shutdown(TW_Device_Ext
 } /* End __twa_shutdown() */
 
 /* Wrapper for __twa_shutdown */
-static void twa_shutdown(struct device *dev)
+static void twa_shutdown(struct pci_dev *pdev)
 {
-	struct Scsi_Host *host = pci_get_drvdata(to_pci_dev(dev));
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 
 	__twa_shutdown(tw_dev);
@@ -2140,9 +2140,7 @@ static struct pci_driver twa_driver = {
 	.id_table	= twa_pci_tbl,
 	.probe		= twa_probe,
 	.remove		= twa_remove,
-	.driver		= {
-		.shutdown = twa_shutdown
-	}
+	.shutdown	= twa_shutdown
 };
 
 /* This function is called on driver initialization */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -2264,9 +2264,9 @@ static void __tw_shutdown(TW_Device_Exte
 } /* End __tw_shutdown() */
 
 /* Wrapper for __tw_shutdown */
-static void tw_shutdown(struct device *dev)
+static void tw_shutdown(struct pci_dev *pdev)
 {
-	struct Scsi_Host *host = pci_get_drvdata(to_pci_dev(dev));
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
 
 	__tw_shutdown(tw_dev);
@@ -2451,9 +2451,7 @@ static struct pci_driver tw_driver = {
 	.id_table	= tw_pci_tbl,
 	.probe		= tw_probe,
 	.remove		= tw_remove,
-	.driver		= {
-		.shutdown = tw_shutdown
-	}
+	.shutdown	= tw_shutdown,
 };
 
 /* This function is called on driver initialization */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6012,7 +6012,7 @@ static int __devinit ipr_probe(struct pc
 
 /**
  * ipr_shutdown - Shutdown handler.
- * @dev:	device struct
+ * @pdev:	pci device struct
  *
  * This function is invoked upon system shutdown/reboot. It will issue
  * an adapter shutdown to the adapter to flush the write cache.
@@ -6020,9 +6020,9 @@ static int __devinit ipr_probe(struct pc
  * Return value:
  * 	none
  **/
-static void ipr_shutdown(struct device *dev)
+static void ipr_shutdown(struct pci_dev *pdev)
 {
-	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(to_pci_dev(dev));
+	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
 	unsigned long lock_flags = 0;
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
@@ -6068,9 +6068,7 @@ static struct pci_driver ipr_driver = {
 	.id_table = ipr_pci_table,
 	.probe = ipr_probe,
 	.remove = ipr_remove,
-	.driver = {
-		.shutdown = ipr_shutdown,
-	},
+	.shutdown = ipr_shutdown,
 };
 
 /**
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -5036,9 +5036,9 @@ megaraid_remove_one(struct pci_dev *pdev
 }
 
 static void
-megaraid_shutdown(struct device *dev)
+megaraid_shutdown(struct pci_dev *pdev)
 {
-	struct Scsi_Host *host = pci_get_drvdata(to_pci_dev(dev));
+	struct Scsi_Host *host = pci_get_drvdata(pdev);
 	adapter_t *adapter = (adapter_t *)host->hostdata;
 
 	__megaraid_shutdown(adapter);
@@ -5070,9 +5070,7 @@ static struct pci_driver megaraid_pci_dr
 	.id_table	= megaraid_pci_tbl,
 	.probe		= megaraid_probe_one,
 	.remove		= __devexit_p(megaraid_remove_one),
-	.driver		= {
-		.shutdown = megaraid_shutdown,
-	},
+	.shutdown	= megaraid_shutdown,
 };
 
 static int __init megaraid_init(void)

[PATCH] PCI: use the MCFG table to properly access pci devices (i386)

[Greg KH]

[PATCH] PCI: use the MCFG table to properly access pci devices (i386)

Now that we have access to the whole MCFG table, let's properly use it
for all pci device accesses (as that's what it is there for, some boxes
don't put all the busses into one entry.)

If, for some reason, the table is incorrect, we fallback to the "old
style" of mmconfig accesses, namely, we just assume the first entry in
the table is the one for us, and blindly use it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit d57e26ceb7dbf44cd08128cb6146116d4281b58b
tree 3fd0f4ff6ec93f3b8f4342649a4b717beb97c903
parent 545493917dc90298e1c38f018ad893f5518928e7
author Greg Kroah-Hartman <gregkh@suse.de> Thu, 23 Jun 2005 17:35:56 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:47 -0700

 arch/i386/pci/mmconfig.c |   29 +++++++++++++++++++++++++----
 1 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -22,10 +22,31 @@ static u32 mmcfg_last_accessed_device;
 /*
  * Functions for accessing PCI configuration space with MMCONFIG accesses
  */
+static u32 get_base_addr(unsigned int seg, int bus)
+{
+	int cfg_num = -1;
+	struct acpi_table_mcfg_config *cfg;
+
+	while (1) {
+		++cfg_num;
+		if (cfg_num >= pci_mmcfg_config_num) {
+			/* something bad is going on, no cfg table is found. */
+			/* so we fall back to the old way we used to do this */
+			/* and just rely on the first entry to be correct. */
+			return pci_mmcfg_config[0].base_address;
+		}
+		cfg = &pci_mmcfg_config[cfg_num];
+		if (cfg->pci_segment_group_number != seg)
+			continue;
+		if ((cfg->start_bus_number <= bus) &&
+		    (cfg->end_bus_number >= bus))
+			return cfg->base_address;
+	}
+}
 
-static inline void pci_exp_set_dev_base(int bus, int devfn)
+static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn)
 {
-	u32 dev_base = pci_mmcfg_config[0].base_address | (bus << 20) | (devfn << 12);
+	u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12);
 	if (dev_base != mmcfg_last_accessed_device) {
 		mmcfg_last_accessed_device = dev_base;
 		set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
@@ -42,7 +63,7 @@ static int pci_mmcfg_read(unsigned int s
 
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(bus, devfn);
+	pci_exp_set_dev_base(seg, bus, devfn);
 
 	switch (len) {
 	case 1:
@@ -71,7 +92,7 @@ static int pci_mmcfg_write(unsigned int 
 
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(bus, devfn);
+	pci_exp_set_dev_base(seg, bus, devfn);
 
 	switch (len) {
 	case 1:

[PATCH] PCI: use the MCFG table to properly access pci devices (x86-64)

[Greg KH]

[PATCH] PCI: use the MCFG table to properly access pci devices (x86-64)

Now that we have access to the whole MCFG table, let's properly use it
for all pci device accesses (as that's what it is there for, some boxes
don't put all the busses into one entry.)

If, for some reason, the table is incorrect, we fallback to the "old
style" of mmconfig accesses, namely, we just assume the first entry in
the table is the one for us, and blindly use it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
commit 1cde8a16815bd85c8137d1ea556398983c597c11
tree c43ab735f7fd96d0576dfb7749c8ded74f9b63b7
parent d57e26ceb7dbf44cd08128cb6146116d4281b58b
author Greg Kroah-Hartman <gregkh@suse.de> Thu, 23 Jun 2005 17:35:56 -0700
committer Greg Kroah-Hartman <gregkh@suse.de> Mon, 27 Jun 2005 21:52:48 -0700

 arch/x86_64/pci/mmconfig.c |   58 ++++++++++++++++++++++++++++++++++++--------
 1 files changed, 48 insertions(+), 10 deletions(-)

diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -13,17 +13,44 @@
 #define MMCONFIG_APER_SIZE (256*1024*1024)
 
 /* Static virtual mapping of the MMCONFIG aperture */
-static char *pci_mmcfg_virt;
+struct mmcfg_virt {
+	struct acpi_table_mcfg_config *cfg;
+	char *virt;
+};
+static struct mmcfg_virt *pci_mmcfg_virt;
+
+static char *get_virt(unsigned int seg, int bus)
+{
+	int cfg_num = -1;
+	struct acpi_table_mcfg_config *cfg;
+
+	while (1) {
+		++cfg_num;
+		if (cfg_num >= pci_mmcfg_config_num) {
+			/* something bad is going on, no cfg table is found. */
+			/* so we fall back to the old way we used to do this */
+			/* and just rely on the first entry to be correct. */
+			return pci_mmcfg_virt[0].virt;
+		}
+		cfg = pci_mmcfg_virt[cfg_num].cfg;
+		if (cfg->pci_segment_group_number != seg)
+			continue;
+		if ((cfg->start_bus_number <= bus) &&
+		    (cfg->end_bus_number >= bus))
+			return pci_mmcfg_virt[cfg_num].virt;
+	}
+}
 
-static inline char *pci_dev_base(unsigned int bus, unsigned int devfn)
+static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
 {
-	return pci_mmcfg_virt + ((bus << 20) | (devfn << 12));
+
+	return get_virt(seg, bus) + ((bus << 20) | (devfn << 12));
 }
 
 static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
-	char *addr = pci_dev_base(bus, devfn); 
+	char *addr = pci_dev_base(seg, bus, devfn);
 
 	if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
@@ -46,7 +73,7 @@ static int pci_mmcfg_read(unsigned int s
 static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 			   unsigned int devfn, int reg, int len, u32 value)
 {
-	char *addr = pci_dev_base(bus,devfn);
+	char *addr = pci_dev_base(seg, bus, devfn);
 
 	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
@@ -73,6 +100,8 @@ static struct pci_raw_ops pci_mmcfg = {
 
 static int __init pci_mmcfg_init(void)
 {
+	int i;
+
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
 		return 0;
 
@@ -90,13 +119,22 @@ static int __init pci_mmcfg_init(void)
 		return 0; 
 
 	/* RED-PEN i386 doesn't do _nocache right now */
-	pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_config[0].base_address, MMCONFIG_APER_SIZE);
-	if (!pci_mmcfg_virt) { 
-		printk("PCI: Cannot map mmconfig aperture\n");
+	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
+	if (pci_mmcfg_virt == NULL) {
+		printk("PCI: Can not allocate memory for mmconfig structures\n");
 		return 0;
-	}	
+	}
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
+		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE);
+		if (!pci_mmcfg_virt[i].virt) {
+			printk("PCI: Cannot map mmconfig aperture for segment %d\n",
+			       pci_mmcfg_config[i].pci_segment_group_number);
+			return 0;
+		}
+		printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
+	}
 
-	printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[0].base_address);
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
 

Re: [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add

[Grant Grundler]

On Mon, Jun 27, 2005 at 10:32:52PM -0700, Greg KH wrote:
> [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add
> 
> When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
> devices attached to it that have not been configured by firmware.  In this
> case, we need to configure the devices before starting them.  This patch
> separates device start from device scan so that we can introduce the
> configuration step in the middle.

PA-RISC must have been doing this before somehow.
All PARISC boxen with PAT PDC firmware (A500/N- and L-Class) 
have to deal with unconfigured PCI Bus devices at boot time.
But I also have to confess I know PCI-PCI Bridge support is broken
on those boxes for the past year... /o\
(system will hard fail/crash if a PCI-PCI Bridge is installed)
Normal add-on PCI cards get configured properly AFAICT. 

"Card-mode" Dino boxen also have to deal with unconfigured PCI devices.
Just PCI-PCI bridges are never below a card-mode Dino.
(Alternative is "built-in" dino - firmware initializes everything
in this case including PCI-PCI Bridges.)


> Also, I have no way of testing the changes I made to the parisc files, so this
> needs review by those folks.  Sorry for the massive cross-post, this touches
> files in many different places.

That's fine...I'll clean it up when I get into ottawa in July and have
reliable bandwidth. Thanks for the heads up.

grant