public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kylene Jo Hall <kjhall@us.ibm.com>
To: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Chris Wright <chrisw@osdl.org>,
	Bjorn Helgaas <bjorn.helgaas@hp.com>,
	LKML <linux-kernel@vger.kernel.org>,
	jgarzik@pobox.com, tpmdd-devel@lists.sourceforge.net
Subject: Re: 2.6.12 breaks 8139cp [PATCH 1 of 2]
Date: Wed, 29 Jun 2005 09:32:28 -0500	[thread overview]
Message-ID: <1120055548.7079.1.camel@localhost.localdomain> (raw)
In-Reply-To: <42C25A3A.1070206@drzeus.cx>

On Wed, 2005-06-29 at 10:22 +0200, Pierre Ossman wrote:
> Kylene Jo Hall wrote:
> 
> >
> >Here is the patch that should fix the problem.  Pierre can you remove
> >the first patch I sent and test this one?
> >
> Apart from an improperly closed enum the patch worked fine. Great work!
> 
> Rgds
> Pierre

Please accept this patch.  The enum closing Pierre mentioned has been
fixed.  This patch fixes the 8309 networking problem.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
---

 drivers/char/tpm/tpm.c       |   90 -------------------------------------------
 drivers/char/tpm/tpm.h       |    2 
 drivers/char/tpm/tpm_atmel.c |   16 ++++---
 drivers/char/tpm/tpm_nsc.c   |   22 ++++++----
 4 files changed, 22 insertions(+), 108 deletions(-)

diff -puN drivers/char/tpm/tpm_atmel.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm_atmel.c
--- 25/drivers/char/tpm/tpm_atmel.c~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm_atmel.c	2005-06-23 21:26:00.000000000 -0700
@@ -22,6 +22,9 @@
 #include "tpm.h"
 
 /* Atmel definitions */
-#define	TPM_ATML_BASE			0x400
+enum tpm_atmel_addr {
+	TPM_ATMEL_BASE_ADDR_LO = 0x08,
+	TPM_ATMEL_BASE_ADDR_HI = 0x09
+};
 
 /* write status bits */
@@ -148,5 +149,4 @@ static struct tpm_vendor_specific tpm_at
 	.req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL,
 	.req_complete_val = ATML_STATUS_DATA_AVAIL,
-	.base = TPM_ATML_BASE,
 	.miscdev = { .fops = &atmel_ops, },
 };
@@ -158,14 +158,16 @@ static int __devinit tpm_atml_init(struc
 {
 	u8 version[4];
 	int rc = 0;
+	int lo, hi;
 
 	if (pci_enable_device(pci_dev))
 		return -EIO;
 
-	if (tpm_lpc_bus_init(pci_dev, TPM_ATML_BASE)) {
-		rc = -ENODEV;
-		goto out_err;
-	}
+	lo = tpm_read_index( TPM_ATMEL_BASE_ADDR_LO );
+	hi = tpm_read_index( TPM_ATMEL_BASE_ADDR_HI );
+
+	tpm_atmel.base = (hi<<8)|lo;
+	dev_dbg( &pci_dev->dev, "Operating with base: 0x%x\n", tpm_atmel.base);
 
 	/* verify that it is an Atmel part */
 	if (tpm_read_index(4) != 'A' || tpm_read_index(5) != 'T'
diff -puN drivers/char/tpm/tpm.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm.c
--- 25/drivers/char/tpm/tpm.c~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm.c	2005-06-23 21:52:40.000000000 -0700
@@ -35,10 +35,4 @@ 
 #define	TPM_BUFSIZE			2048
 
-/* PCI configuration addresses */
-#define	PCI_GEN_PMCON_1			0xA0
-#define	PCI_GEN1_DEC			0xE4
-#define	PCI_LPC_EN			0xE6
-#define	PCI_GEN2_DEC			0xEC
-
 static LIST_HEAD(tpm_chip_list);
 static DEFINE_SPINLOCK(driver_lock);
@@ -61,72 +61,6 @@ void tpm_time_expired(unsigned long ptr)
 EXPORT_SYMBOL_GPL(tpm_time_expired);
 
 /*
- * Initialize the LPC bus and enable the TPM ports
- */
-int tpm_lpc_bus_init(struct pci_dev *pci_dev, u16 base)
-{
-	u32 lpcenable, tmp;
-	int is_lpcm = 0;
-
-	switch (pci_dev->vendor) {
-	case PCI_VENDOR_ID_INTEL:
-		switch (pci_dev->device) {
-		case PCI_DEVICE_ID_INTEL_82801CA_12:
-		case PCI_DEVICE_ID_INTEL_82801DB_12:
-			is_lpcm = 1;
-			break;
-		}
-		/* init ICH (enable LPC) */
-		pci_read_config_dword(pci_dev, PCI_GEN1_DEC, &lpcenable);
-		lpcenable |= 0x20000000;
-		pci_write_config_dword(pci_dev, PCI_GEN1_DEC, lpcenable);
-
-		if (is_lpcm) {
-			pci_read_config_dword(pci_dev, PCI_GEN1_DEC,
-					      &lpcenable);
-			if ((lpcenable & 0x20000000) == 0) {
-				dev_err(&pci_dev->dev,
-					"cannot enable LPC\n");
-				return -ENODEV;
-			}
-		}
-
-		/* initialize TPM registers */
-		pci_read_config_dword(pci_dev, PCI_GEN2_DEC, &tmp);
-
-		if (!is_lpcm)
-			tmp = (tmp & 0xFFFF0000) | (base & 0xFFF0);
-		else
-			tmp =
-			    (tmp & 0xFFFF0000) | (base & 0xFFF0) |
-			    0x00000001;
-
-		pci_write_config_dword(pci_dev, PCI_GEN2_DEC, tmp);
-
-		if (is_lpcm) {
-			pci_read_config_dword(pci_dev, PCI_GEN_PMCON_1,
-					      &tmp);
-			tmp |= 0x00000004;	/* enable CLKRUN */
-			pci_write_config_dword(pci_dev, PCI_GEN_PMCON_1,
-					       tmp);
-		}
-		tpm_write_index(0x0D, 0x55);	/* unlock 4F */
-		tpm_write_index(0x0A, 0x00);	/* int disable */
-		tpm_write_index(0x08, base);	/* base addr lo */
-		tpm_write_index(0x09, (base & 0xFF00) >> 8);	/* base addr hi */
-		tpm_write_index(0x0D, 0xAA);	/* lock 4F */
-		break;
-	case PCI_VENDOR_ID_AMD:
-		/* nothing yet */
-		break;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(tpm_lpc_bus_init);
-
-/*
  * Internal kernel interface to transmit TPM commands
  */
 static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
@@ -586,10 +500,6 @@ int tpm_pm_resume(struct pci_dev *pci_de
 	if (chip == NULL)
 		return -ENODEV;
 
-	spin_lock(&driver_lock);
-	tpm_lpc_bus_init(pci_dev, chip->vendor->base);
-	spin_unlock(&driver_lock);
-
 	return 0;
 }
 
diff -puN drivers/char/tpm/tpm.h~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm.h
--- 25/drivers/char/tpm/tpm.h~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm.h	2005-06-23 21:26:00.000000000 -0700
@@ -91,9 +91,7 @@ static inline void tpm_write_index(int i
 	outb(value & 0xFF, TPM_DATA);
 }

 extern void tpm_time_expired(unsigned long);
-extern int tpm_lpc_bus_init(struct pci_dev *, u16);
-
 extern int tpm_register_hardware(struct pci_dev *,
 				 struct tpm_vendor_specific *);
 extern int tpm_open(struct inode *, struct file *);
diff -puN drivers/char/tpm/tpm_nsc.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm_nsc.c
--- 25/drivers/char/tpm/tpm_nsc.c~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm_nsc.c	2005-06-23 21:26:00.000000000 -0700
@@ -22,6 +22,10 @@
 /* National definitions */
 #define 	TPM_NSC_BASE			0x360
 #define	TPM_NSC_IRQ			0x07
+#define	TPM_NSC_BASE0_HI		0x60
+#define	TPM_NSC_BASE0_LO		0x61
+#define	TPM_NSC_BASE1_HI		0x62
+#define	TPM_NSC_BASE1_LO		0x63

 #define	NSC_LDN_INDEX			0x07
 #define	NSC_SID_INDEX			0x20
@@ -246,5 +250,4 @@ static struct tpm_vendor_specific tpm_ns
 	.req_complete_mask = NSC_STATUS_OBF,
 	.req_complete_val = NSC_STATUS_OBF,
-	.base = TPM_NSC_BASE,
 	.miscdev = { .fops = &nsc_ops, },
 };
@@ -255,15 +258,16 @@ static int __devinit tpm_nsc_init(struct
 				  const struct pci_device_id *pci_id)
 {
 	int rc = 0;
+	int lo, hi;
+
+	hi = tpm_read_index(TPM_NSC_BASE0_HI);
+	lo = tpm_read_index(TPM_NSC_BASE0_LO);
+
+	tpm_nsc.base = (hi<<8) | lo;
 
 	if (pci_enable_device(pci_dev))
 		return -EIO;
 
-	if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
-		rc = -ENODEV;
-		goto out_err;
-	}
-
 	/* verify that it is a National part (SID) */
 	if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
 		rc = -ENODEV;
_





  reply	other threads:[~2005-06-29 14:33 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-06-22 21:03 2.6.12 breaks 8139cp Pierre Ossman
2005-06-22 21:34 ` Bjorn Helgaas
2005-06-23  7:50   ` Pierre Ossman
2005-06-23 12:59     ` Felipe W Damasio
2005-06-23 17:43     ` Bjorn Helgaas
2005-06-23 22:14       ` Pierre Ossman
2005-06-25  2:03         ` Ed Sweetman
2005-06-25  2:18           ` Ed Sweetman
2005-06-25  2:32             ` Ed Sweetman
2005-06-25  3:15               ` Jeff Garzik
2005-06-25 10:34           ` Pierre Ossman
2005-06-26 13:31             ` Ed Sweetman
2005-06-28  6:28         ` Pierre Ossman
2005-06-28 12:32           ` Pierre Ossman
2005-06-28 14:09             ` Kylene Jo Hall
2005-06-28 14:40               ` Pierre Ossman
2005-06-28 15:08                 ` Kylene Jo Hall
2005-06-28 16:51                   ` Pierre Ossman
2005-06-28 17:03                     ` Kylene Jo Hall
2005-06-29  7:03                       ` Pierre Ossman
2005-06-28 17:23                   ` Chris Wright
2005-06-28 20:29                     ` 2.6.12 breaks 8139cp [PATCH 1 of 2] Kylene Jo Hall
2005-06-28 20:34                       ` Chris Wright
2005-06-28 22:10                         ` Kylene Jo Hall
2005-06-29  8:22                           ` Pierre Ossman
2005-06-29 14:32                             ` Kylene Jo Hall [this message]
     [not found]                               ` <20050705153512.GJ9046@shell0.pdx.osdl.net>
2005-07-07 20:01                                 ` Kylene Jo Hall
2005-07-08  6:14                                   ` Chris Wright
2005-06-28 20:30                     ` 2.6.12 breaks 8139cp [PATCH 2 " Kylene Jo Hall
2005-06-23 17:17 ` 2.6.12 breaks 8139cp Roberto Oppedisano
2005-06-23 18:00   ` Bjorn Helgaas
2005-06-23 20:38     ` Ed Sweetman
2005-06-23 20:55       ` Bjorn Helgaas
2005-06-23 21:14         ` Ed Sweetman
2005-06-23 21:07     ` Roberto Oppedisano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1120055548.7079.1.camel@localhost.localdomain \
    --to=kjhall@us.ibm.com \
    --cc=bjorn.helgaas@hp.com \
    --cc=chrisw@osdl.org \
    --cc=drzeus-list@drzeus.cx \
    --cc=jgarzik@pobox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tpmdd-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox