* [PATCH] make visual workstation subarch link again
@ 2005-08-07 7:04 Tom Duffy
0 siblings, 0 replies; only message in thread
From: Tom Duffy @ 2005-08-07 7:04 UTC (permalink / raw)
To: akpm; +Cc: pazke, linux-visws-devel, ebiederm, linux-kernel
This patch add stubs to allow the visws subarch to link again. Also
needs Eric W. Biederman's patch adding machine_emergency_restart() and
machine_shutdown() sent earlier today to link properly:
http://marc.theaimsgroup.com/?l=linux-kernel&m=112335772219837&w=2
Signed-off-by: Tom Duffy <thomas.duffy.99@alumni.brown.edu>
diff -Nur -X /home/tduffy/dontdiff linux-2.6.13-rc5/arch/i386/mach-visws/setup.c linux-2.6.13-rc5/arch/i386/mach-visws/setup.c
--- linux-2.6.13-rc5/arch/i386/mach-visws/setup.c 2005-08-06 08:46:46.138055928 -0700
+++ linux-2.6.13-rc5/arch/i386/mach-visws/setup.c 2005-08-06 08:47:26.509918472 -0700
@@ -14,6 +14,8 @@
#include "cobalt.h"
#include "piix4.h"
+int no_broadcast;
+
char visws_board_type = -1;
char visws_board_rev = -1;
diff -Nur -X /home/tduffy/dontdiff linux-2.6.13-rc5/arch/i386/pci/visws.c linux-2.6.13-rc5/arch/i386/pci/visws.c
--- linux-2.6.13-rc5/arch/i386/pci/visws.c 2005-08-06 00:56:45.843152392 -0700
+++ linux-2.6.13-rc5/arch/i386/pci/visws.c 2005-08-06 08:58:02.475237048 -0700
@@ -18,8 +18,10 @@
extern struct pci_raw_ops pci_direct_conf1;
static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
+static void pci_visws_disable_irq(struct pci_dev *dev) { }
int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq;
+void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq;
void __init pcibios_penalize_isa_irq(int irq, int active) {}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-08-07 7:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-07 7:04 [PATCH] make visual workstation subarch link again Tom Duffy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox