From: Lee Revell <rlrevell@joe-job.com>
To: Daniel Pittman <daniel@rimspace.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Adaptec AHA-2940U2W "Data Parity Error Dectected" messages
Date: Tue, 09 Aug 2005 03:27:54 -0400 [thread overview]
Message-ID: <1123572475.27813.2.camel@mindpipe> (raw)
In-Reply-To: <878xzbr2zw.fsf@rimspace.net>
On Tue, 2005-08-09 at 17:19 +1000, Daniel Pittman wrote:
> I recently installed a SCSI tape drive and Adaptec AHA-2940U2W SCSI
> controller into my server to run backups.
>
> Since then, the driver issues these warnings on a semi-regular basis
> while the drive is busy:
>
> Aug 9 17:00:26 anu kernel: scsi0: Data Parity Error Detected during address or write data phase
> Aug 9 17:00:26 anu kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Make sure the hardware is all installed correctly. Check that the card
is fully seated, or try it in another PCI slot. Also check your cabling
and termination.
Lee
next prev parent reply other threads:[~2005-08-09 7:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-09 7:19 Adaptec AHA-2940U2W "Data Parity Error Dectected" messages Daniel Pittman
2005-08-09 7:27 ` Lee Revell [this message]
2005-08-09 8:16 ` Daniel Pittman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1123572475.27813.2.camel@mindpipe \
--to=rlrevell@joe-job.com \
--cc=daniel@rimspace.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox