Re: 2.6.13-rc6-rt6

[Steven Rostedt <rostedt@goodmis.org>]

[-- Attachment #1: Type: text/plain, Size: 1179 bytes --]

Ingo,

FYI, I ran this on my laptop (Pentium4 HT) and it locked up shortly
after it started INIT.  I rebooted, and now it's up and running 
with no problems!?!  I'll reboot it a few more times to see if it will
lock up again.

Unfortunately, my laptop doesn't have any serial so I don't have much to
debug with it.  I'll set up netconsole, but this is not as reliable
under RT, or was this fixed. I remember before that it could call things
that would schedule and had some hooks to keep interrupts on.

Oh, I also did get the message when it started:

WARNING: kstopmachine/859 changed soft IRQ-flags.
 [<c0149e0b>] stop_machine+0x11b/0x160 (8)
 [<c0149e7e>] do_stop+0xe/0x70 (32)
 [<c0139c5a>] kthread+0xba/0xc0 (16)
 [<c0139ba0>] kthread+0x0/0xc0 (28)
 [<c0101385>] kernel_thread_helper+0x5/0x10 (16)
---------------------------
| preempt count: 00000000 ]
| 0-level deep critical section nesting:
----------------------------------------

------------------------------
| showing all locks held by: |  (kstopmachine/859 [f74dc840,   0]):
------------------------------

The kernel I used was rt6 with my latest patch to the
raw_local_save_flags.

Config attached.

-- Steve


[-- Attachment #2: config-bilbo.bz2 --]
[-- Type: application/x-bzip, Size: 8789 bytes --]