From: James Bottomley <James.Bottomley@SteelEye.com>
To: Andrew Morton <akpm@osdl.org>, Linus Torvalds <torvalds@osdl.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>,
Jens Axboe <axboe@suse.de>
Subject: [GIT PATCH] SCSI merge for 2.6.13
Date: Tue, 06 Sep 2005 19:37:32 -0500 [thread overview]
Message-ID: <1126053452.5012.28.camel@mulgrave> (raw)
This should be the entire contents of the SCSI tree I've been saving.
It also includes Jens' send SCSI requests via bios tree that he, Mike
Christie and I have been working on.
The patch is available here:
master.kernel.org:/pub/linux/kernel/scm/jejb/scsi-for-linus-2.6.git
The short changelog is:
Adrian Bunk:
o drivers/scsi/constants.c should include scsi_dbg.h
o git-scsi-misc: drivers/scsi/ch.c: remove devfs stuff
Alan Stern:
o sd: pause in sd_spinup_disk for slow USB devices
o return success after retries in scsi_eh_tur
Andrew Morton:
o fix C syntax problem in scsi_lib.c
o fix warning in aic7770.c
o fix warning in scsi_softirq
o aic79xx: needs to select SPI_TRANSPORT_ATTRS
Andrew Vasquez:
o qla2xxx: Update version number to 8.01.00-k
o qla2xxx: Stop firmware execution at unintialization time
o qla2xxx: Replace schedule_timeout()
o qla2xxx: Remove bad call to fc_remove_host() during probe failure
o qla2xxx: Add host attributes
o qla2xxx: Add change_queue_depth/type() API support
o qla2xxx: Remove redundant call to pci_unmap_sg()
o qla2xxx: Remove RISC pause/release barriers during flash manipulation
o qla2xxx: Correct LED scheme definition
o qla2xxx: Simplify redundant target/device reset logic
o qla2xxx: Correct domain/area exclusion logic
o qla2xxx: Add FDMI support
o qla2xxx: Export class-of-service (COS) information
o qla2xxx: Use dma_get_required_mask() in determining the 'ideal' DMA mask
Anton Blanchard:
o Universal Xport no attach blacklist
Christoph Hellwig:
o unexport scsi_add_timer/scsi_delete_timer
o switch EH thread startup to the kthread API
o fix SCSI_IOCTL_PROBE_HOST
o fusion: whitespace fixes
o fusion: endianess fixes
o fusion: update LSI headers
o fusion: extended config header support
o aic7xxx: remove aiclib.c
o comment cleanup for spi_execute
o aiclib remove dead
o aic79xx: sane pci probing
o aic79xx: remove some dead code
o qla1280: endianess annotations
o qla1280: don't use bitfields for hardware access, parameters
o qla1280: don't use bitfields for hardware access in isp_config
o qla1280: always load microcode
o qla1280: remove SG_SEGMENTS
o qla1280: use SAM_ constants
o qla1280: misc cleanups
o qla1280: interupt posting for irq disabling/enabling
o qla1280: remove dead per-host flag variables
o [PATCH] ll_rw_blk.c kerneldoc updates
Dave Boutcher:
o ibmvscsi timeout fix
o ibmvscsi eh locking
Dave Jones:
o blacklist addition
Douglas Gilbert:
o sg direct io/mmap oops, st sync
Hannes Reinecke:
o aic79xx: fixup DT setting
o aic79xx: DV parameter settings
o aic79xx: update to use scsi_transport_spi
o aic79xx: Remove busyq
James Bottomley:
o Merge by hand (conflicts in sd.c)
o quieten messages on scsi_execute commands
o ibmvscsi: handle large scatter/gather lists
o This patch fixes in st.c the bug in the signed/unsigned int comparison
o embryonic RAID class
o attribute container final klist fixes
o correct attribute_container list usage
o Merge by hand (conflicts in sr.c)
o fix sense buffer length handling problem
o fix 3ware raid emulated commands
o convert ch to use scsi_execute_req
o convert sr to scsi_execute_req
o convert sd to scsi_execute_req (and update the scsi_execute_req API)
o convert SPI transport class to scsi_execute
o convert the remaining mid-layer pieces to scsi_execute_req
o Merge HEAD from ../scsi-misc-2.6-tmp
o add missing attribute container function prototype
o fix transport class corner case after rework
o use scatter lists for all block pc requests and simplify hw handlers
o update scsi_wait_req to new format for blk_rq_map_kern()
o use scatter lists for all block pc requests and simplify hw handlers
o fix mismerge in ll_rw_blk.c
o correct transport class abstraction to work outside SCSI
o add ability to deny binding to SPI transport class
o aic7xxx: lost multifunction flags handling
o Make the HSG80 a REPORTLUN2 device
o aic79xx: fix boot panic with no hardware
o add global timeout to the scsi mid-layer
o aacraid: correct use of cmd->timeout field
o aic7xxx/79xx: fix another potential panic due to a non existent target
o aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9
o aic79xx: add hold_mcs to the transport parameters
o add missing hold_mcs parameter to the spi transport class
o aic79xx: fix up transport settings
o add template for scsi_host_set_state()
o [PATCH] update blk_execute_rq to take an at_head parameter
o [PATCH] The blk_rq_map_user() change missed an update in scsi_ioctl.c
o [PATCH] Add scatter-gather support for the block layer SG_IO
James Smart:
o Add Emulex as maintainer of lpfc SCSI driver
o lpfc driver 8.0.30 : update version to 8.0.30
o lpfc driver 8.0.30 : convert to use of int_to_scsilun()
o lpfc driver 8.0.30 : dev_loss and nodev timeouts
o lpfc driver 8.0.30 : fix get_stats panic
o lpfc driver 8.0.30 : task mgmt bit clearing
o lpfc driver 8.0.30 : fix lip/cablepull panic
o lpfc driver 8.0.30 : fix iocb reuse initialization
Jens Axboe:
o [PATCH] kill 'reading' variable in sg_io(), it isn't used anymore
o [PATCH] Cleanup blk_rq_map_* interfaces
o [PATCH] Keep the bio end_io parts inside of bio.c for blk_rq_map_kern()
Kai Mäkisara:
o drivers/scsi/st.c: add reference count and related fixes
Mark Haverkamp:
o aacraid: bad BUG_ON fix
o aacraid: Fix aacraid probe breakage (updated)
o aacraid: adapter support update
o aacraid: sgraw command support
o aacraid: aif registration timeout fix
o aacraid: remove duplicate io callback code
o aacraid: driver shutdown method
o aacraid: driver version update
o aacraid: interupt mitigation
Mike Anderson:
o host state model update: mediate host add/remove race
o host state model update: reimplement scsi_host_cancel
o host state model update: replace old host bitmap state
Mike Christie:
o [PATCH] Add blk_rq_map_kern()
Olaf Hering:
o aic byteorder fixes after recent cleanup
Pete Zaitcev:
o sr.c: Fix getting wrong size
And the diffstat:
Documentation/scsi/aic7xxx.txt | 6
Documentation/scsi/scsi_mid_low_api.txt | 41
MAINTAINERS | 7
drivers/base/attribute_container.c | 86
drivers/base/transport_class.c | 19
drivers/block/ll_rw_blk.c | 192
drivers/block/scsi_ioctl.c | 60
drivers/cdrom/cdrom.c | 15
drivers/ide/ide-disk.c | 2
drivers/message/fusion/lsi/mpi.h | 19
drivers/message/fusion/lsi/mpi_cnfg.h | 85
drivers/message/fusion/lsi/mpi_history.txt | 67
drivers/message/fusion/lsi/mpi_init.h | 203
drivers/message/fusion/lsi/mpi_ioc.h | 11
drivers/message/fusion/lsi/mpi_targ.h | 74
drivers/message/fusion/mptbase.c | 321 -
drivers/message/fusion/mptbase.h | 5
drivers/message/fusion/mptctl.c | 14
drivers/message/fusion/mptscsih.c | 140
drivers/message/fusion/mptspi.c | 6
drivers/scsi/3w-xxxx.c | 57
drivers/scsi/Kconfig | 6
drivers/scsi/Makefile | 2
drivers/scsi/aacraid/aachba.c | 327 -
drivers/scsi/aacraid/aacraid.h | 55
drivers/scsi/aacraid/commctrl.c | 18
drivers/scsi/aacraid/comminit.c | 4
drivers/scsi/aacraid/commsup.c | 20
drivers/scsi/aacraid/linit.c | 106
drivers/scsi/aacraid/rkt.c | 20
drivers/scsi/aacraid/rx.c | 20
drivers/scsi/aacraid/sa.c | 22
drivers/scsi/advansys.c | 4
drivers/scsi/aic7xxx/Kconfig.aic79xx | 1
drivers/scsi/aic7xxx/aic7770.c | 1
drivers/scsi/aic7xxx/aic79xx.h | 6
drivers/scsi/aic7xxx/aic79xx_core.c | 104
drivers/scsi/aic7xxx/aic79xx_osm.c | 5502 ++++++-----------------
drivers/scsi/aic7xxx/aic79xx_osm.h | 288 -
drivers/scsi/aic7xxx/aic79xx_osm_pci.c | 82
drivers/scsi/aic7xxx/aic79xx_pci.c | 14
drivers/scsi/aic7xxx/aic79xx_proc.c | 88
drivers/scsi/aic7xxx/aic7xxx.h | 4
drivers/scsi/aic7xxx/aic7xxx.reg | 4
drivers/scsi/aic7xxx/aic7xxx.seq | 5
drivers/scsi/aic7xxx/aic7xxx_93cx6.c | 36
drivers/scsi/aic7xxx/aic7xxx_core.c | 60
drivers/scsi/aic7xxx/aic7xxx_osm.c | 97
drivers/scsi/aic7xxx/aic7xxx_osm.h | 2
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 29
drivers/scsi/aic7xxx/aic7xxx_proc.c | 45
drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped | 6
drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped | 4
drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped | 933 +--
drivers/scsi/aic7xxx/aiclib.c | 1377 -----
drivers/scsi/aic7xxx/aiclib.h | 890 ---
drivers/scsi/ch.c | 42
drivers/scsi/constants.c | 49
drivers/scsi/hosts.c | 113
drivers/scsi/ibmvscsi/ibmvscsi.c | 179
drivers/scsi/ibmvscsi/ibmvscsi.h | 2
drivers/scsi/lpfc/lpfc.h | 5
drivers/scsi/lpfc/lpfc_attr.c | 6
drivers/scsi/lpfc/lpfc_ct.c | 2
drivers/scsi/lpfc/lpfc_els.c | 1
drivers/scsi/lpfc/lpfc_hbadisc.c | 3
drivers/scsi/lpfc/lpfc_init.c | 5
drivers/scsi/lpfc/lpfc_mbox.c | 5
drivers/scsi/lpfc/lpfc_mem.c | 5
drivers/scsi/lpfc/lpfc_nportdisc.c | 1
drivers/scsi/lpfc/lpfc_scsi.c | 24
drivers/scsi/lpfc/lpfc_scsi.h | 13
drivers/scsi/lpfc/lpfc_sli.c | 2
drivers/scsi/lpfc/lpfc_version.h | 2
drivers/scsi/qla1280.c | 359 -
drivers/scsi/qla1280.h | 336 -
drivers/scsi/qla2xxx/qla_attr.c | 136
drivers/scsi/qla2xxx/qla_dbg.h | 7
drivers/scsi/qla2xxx/qla_def.h | 157
drivers/scsi/qla2xxx/qla_gbl.h | 12
drivers/scsi/qla2xxx/qla_gs.c | 564 ++
drivers/scsi/qla2xxx/qla_init.c | 24
drivers/scsi/qla2xxx/qla_iocb.c | 6
drivers/scsi/qla2xxx/qla_isr.c | 2
drivers/scsi/qla2xxx/qla_mbx.c | 97
drivers/scsi/qla2xxx/qla_os.c | 117
drivers/scsi/qla2xxx/qla_sup.c | 34
drivers/scsi/qla2xxx/qla_version.h | 4
drivers/scsi/raid_class.c | 250 +
drivers/scsi/scsi.c | 17
drivers/scsi/scsi_devinfo.c | 4
drivers/scsi/scsi_error.c | 48
drivers/scsi/scsi_ioctl.c | 64
drivers/scsi/scsi_lib.c | 294 -
drivers/scsi/scsi_priv.h | 3
drivers/scsi/scsi_scan.c | 128
drivers/scsi/scsi_sysfs.c | 62
drivers/scsi/scsi_transport_fc.c | 6
drivers/scsi/scsi_transport_spi.c | 168
drivers/scsi/sd.c | 187
drivers/scsi/sg.c | 11
drivers/scsi/sr.c | 75
drivers/scsi/sr.h | 1
drivers/scsi/sr_ioctl.c | 62
drivers/scsi/st.c | 156
drivers/scsi/st.h | 3
fs/bio.c | 223
include/linux/attribute_container.h | 12
include/linux/bio.h | 6
include/linux/blkdev.h | 10
include/linux/raid_class.h | 59
include/linux/transport_class.h | 11
include/scsi/scsi_cmnd.h | 8
include/scsi/scsi_dbg.h | 2
include/scsi/scsi_device.h | 22
include/scsi/scsi_eh.h | 11
include/scsi/scsi_host.h | 26
include/scsi/scsi_request.h | 16
include/scsi/scsi_transport_spi.h | 6
119 files changed, 6830 insertions(+), 9047 deletions(-)
James
next reply other threads:[~2005-09-07 0:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-07 0:37 James Bottomley [this message]
2005-09-07 17:47 ` [GIT PATCH] SCSI merge for 2.6.13 Patrick Mansfield
2005-09-07 18:14 ` James Bottomley
2005-09-07 19:35 ` Jens Axboe
2005-09-08 0:31 ` Linus Torvalds
2005-09-08 0:40 ` James Bottomley
2005-09-08 0:41 ` Linus Torvalds
2005-09-08 0:49 ` Linus Torvalds
2005-09-08 0:56 ` James Bottomley
2005-09-08 0:59 ` Andrew Morton
2005-09-08 0:53 ` James Bottomley
-- strict thread matches above, loose matches on Subject: below --
2005-09-13 2:44 [GIT PATCH] scsi " James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1126053452.5012.28.camel@mulgrave \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=axboe@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox