public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* info for alc880
@ 2005-10-10 17:08 Luca
  2005-10-12  2:56 ` Lee Revell
  0 siblings, 1 reply; 2+ messages in thread
From: Luca @ 2005-10-10 17:08 UTC (permalink / raw)
  To: linux-kernel

hi, I have a audio card Intel HDA with chipset Realteck ALC880.
I have kernel 2.6.13.3 and I return this error when the pc start:

ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
hda_codec: Cannot set up configuration from BIOS.  Using 3-stack mode...

This card is not supported?  I must patch the kernel?

Thanks everybody

Luca

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: info for alc880
  2005-10-10 17:08 info for alc880 Luca
@ 2005-10-12  2:56 ` Lee Revell
  0 siblings, 0 replies; 2+ messages in thread
From: Lee Revell @ 2005-10-12  2:56 UTC (permalink / raw)
  To: Luca; +Cc: linux-kernel

On Mon, 2005-10-10 at 19:08 +0200, Luca wrote:
> hi, I have a audio card Intel HDA with chipset Realteck ALC880.
> I have kernel 2.6.13.3 and I return this error when the pc start:
> 
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
> hda_codec: Cannot set up configuration from BIOS.  Using 3-stack mode...
> 
> This card is not supported?  I must patch the kernel?

Known problem.  See ALSA bugs 1316, 1429, 1453, and 1460.

(I wish users would check for an existing bug before submitting a new
one...)

Lee


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-10-12  3:59 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-10 17:08 info for alc880 Luca
2005-10-12  2:56 ` Lee Revell

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox