[PATCH 00/16] V4L/DVB updates

[PATCH 00/16] V4L/DVB updates

[mchehab]

        This patch series is also available under v4l-dvb.git tree at:
                kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git

	Linus, please pull these from master branch.

	It contains the following stuff:

   - Kconfig: DVB_USB_CXUSB depends on DVB_LGDT330X and DVB_MT352
   - Fix NICAM buzz on analog sound
   - Added signal detection support to tvp5150
   - Fix [Bug 5895] to correct snd_87x autodetect
   - Add IR support to KWorld DVB-T (cx22702-based)
   - Add standard for South Korean NTSC-M using A2 audio.
   - Fixed i2c return value, conversion mdelay to msleep
   - Support for Galaxis DVB-S rev1.3
   - Use parallel transport for FusionHDTV Dual Digital USB
   - Use MT352 parallel transport function for all Bluebird FusionHDTV DVB-T boxes.
   - FIX: Multiple usage of VP7045-based devices
   - FIX: Check if FW was downloaded or not + new firmware file
   - Makes Some symbols static.
   - fix saa7146 kobject register failure
   - DVB: remove the at76c651/tda80xx frontends
   - Disabled debug on by default in tvp5150

The following stuff is also pending to be pulled from v4l-dvb.git:
   - Activate remote control on HVR1100
   - Add bttv card MagicTV (rebranded MachTV)
   - whitespace cleanup: insert missing space before curly brackets
   - More whitespace cleanup in bttv-cards.c
   - Add support for DViCO FusionHDTV DVB-T USB devices
   - Conversions from kmalloc+memset to k(z|c)alloc
   - don't ignore return from i2c_add_driver() for tuner-3036
   - Pci probing for stradis driver
   - Stradis video little cleanup
   - Enable microtune for Pinnacle 300i boards
   - Stradis Lindent
   - Stradis Kconfig url changed
   - Fixes some bad global variables
   - debug renamed to cx25840_debug
   - Add PCI ID for UltraView DVB-T Plus, rebranded DViCO FusionHDTV DVB-T Plus
   - Added USB ID for DigitalNow DVB-T Dual USB, DViCO clone
   - adding support for knc1 Tv Star dvb-s
   - Some fixes to compat_ioctl32
   - VIDEO_SAA7134_ALSA shouldn't select SND_PCM_OSS

Cheers,
Mauro

   Diffstat from newer stuff follows.

---

 drivers/media/dvb/bt8xx/bt878.c            |   44 +
 drivers/media/dvb/bt8xx/bt878.h            |   17 
 drivers/media/dvb/dvb-usb/Kconfig          |   12 
 drivers/media/dvb/dvb-usb/cxusb.c          |    4 
 drivers/media/dvb/dvb-usb/digitv.c         |   13 
 drivers/media/dvb/dvb-usb/vp7045-fe.c      |    6 
 drivers/media/dvb/frontends/Kconfig        |   12 
 drivers/media/dvb/frontends/Makefile       |    2 
 drivers/media/dvb/frontends/at76c651.c     |  450 ------------
 drivers/media/dvb/frontends/at76c651.h     |   47 -
 drivers/media/dvb/frontends/tda80xx.c      |  734 ---------------------
 drivers/media/dvb/frontends/tda80xx.h      |   51 -
 drivers/media/dvb/ttpci/av7110.c           |   14 
 drivers/media/video/bttv-driver.c          |    2 
 drivers/media/video/cx25840/cx25840-core.c |   50 -
 drivers/media/video/cx88/cx88-alsa.c       |    6 
 drivers/media/video/cx88/cx88-core.c       |   10 
 drivers/media/video/cx88/cx88-input.c      |    1 
 drivers/media/video/em28xx/em28xx-core.c   |   15 
 drivers/media/video/em28xx/em28xx-i2c.c    |    8 
 drivers/media/video/hexium_orion.c         |    2 
 drivers/media/video/tda9887.c              |    7 
 drivers/media/video/tuner-core.c           |    5 
 drivers/media/video/tvp5150.c              |   11 
 include/linux/videodev2.h                  |    4 
 25 files changed, 170 insertions(+), 1357 deletions(-)

[PATCH 02/16] Fix NICAM buzz on analog sound

[mchehab]

From: Marcin Rudowski <mar_rud@poczta.onet.pl>

Apparently, having the number of lines fixed at 4 reduces (or even kills)
the buzz found in NICAM stereo with analog sound.

Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/cx88/cx88-core.c |   10 ++++++----
 1 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 8d6d6a6..3720f24 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -787,12 +787,14 @@ static int set_pll(struct cx88_core *cor
 
 int cx88_start_audio_dma(struct cx88_core *core)
 {
+	/* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
+	int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
 	/* setup fifo + format */
-	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
-	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
 
-	cx_write(MO_AUDD_LNGTH,    128); /* fifo bpl size */
-	cx_write(MO_AUDR_LNGTH,    128); /* fifo bpl size */
+	cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
+	cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
 
 	/* start dma */
 	cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */

[PATCH 01/16] Kconfig: DVB_USB_CXUSB depends on DVB_LGDT330X and DVB_MT352

[mchehab]

From: Michael Krufky <mkrufky@linuxtv.org>

- rename DVB_USB_CXUSB one-liner description to:
  Conexant USB2.0 hybrid reference design support.
- with the addition of bluebird support to dvb-usb-cxusb,
  it now depends on lgdt330x and mt352 modules.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/dvb-usb/Kconfig |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 90a69d3..d3df120 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -83,12 +83,18 @@ config DVB_USB_UMT_010
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
 config DVB_USB_CXUSB
-	tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
+	tristate "Conexant USB2.0 hybrid reference design support"
 	depends on DVB_USB
 	select DVB_CX22702
+	select DVB_LGDT330X
+	select DVB_MT352
 	help
-	  Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
-	  only the DVB-T part is supported.
+	  Say Y here to support the Conexant USB2.0 hybrid reference design.
+	  Currently, only DVB and ATSC modes are supported, analog mode
+	  shall be added in the future. Devices that require this module:
+
+	  Medion MD95700 hybrid USB2.0 device.
+	  DViCO FusionHDTV (Bluebird) USB2.0 devices
 
 config DVB_USB_DIGITV
 	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"

[PATCH 04/16] Fix [Bug 5895] to correct snd_87x autodetect

[mchehab]

From: Manu Abraham <manu@linuxtv.org>

With DVB drivers enabled snd_87x (ALSA) don't detect.


Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/bt8xx/bt878.c |   44 ++++++++++++++++++++++++++++++++++++++-
 drivers/media/dvb/bt8xx/bt878.h |   17 +++++++++++++++
 2 files changed, 60 insertions(+), 1 deletions(-)

diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index a04bb61..34c3189 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -381,6 +381,23 @@ bt878_device_control(struct bt878 *bt, u
 
 EXPORT_SYMBOL(bt878_device_control);
 
+
+struct cards card_list[] __devinitdata = {
+
+	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
+	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },
+	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,			"Pinnacle PCTV Sat" },
+	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,			"Pinnacle PCTV SAT CI" },
+	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,			"Twinhan VisionPlus DVB" },
+	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,			"ChainTech digitop DST-1000 DVB-S" },
+	{ 0x07711461, BTTV_BOARD_AVDVBT_771,			"AVermedia AverTV DVB-T 771" },
+	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,		"DViCO FusionHDTV DVB-T Lite" },
+	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,	"DViCO FusionHDTV 5 Lite" },
+	{ 0x20007063, BTTV_BOARD_PC_HDTV,			"pcHDTV HD-2000 TV"},
+	{ 0, -1, NULL }
+};
+
+
 /***********************/
 /* PCI device handling */
 /***********************/
@@ -388,18 +405,41 @@ EXPORT_SYMBOL(bt878_device_control);
 static int __devinit bt878_probe(struct pci_dev *dev,
 				 const struct pci_device_id *pci_id)
 {
-	int result;
+	int result = 0, has_dvb = 0, i;
 	unsigned char lat;
 	struct bt878 *bt;
 #if defined(__powerpc__)
 	unsigned int cmd;
 #endif
+	unsigned int cardid;
+	unsigned short id;
+	struct cards *dvb_cards;
 
 	printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
 	       bt878_num);
 	if (pci_enable_device(dev))
 		return -EIO;
 
+	pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
+	cardid = id << 16;
+	pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
+	cardid |= id;
+
+	for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
+		if (cardid == dvb_cards->pci_id) {
+			printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+				__func__, cardid, dvb_cards->name);
+			has_dvb = 1;
+		}
+	}
+
+	if (!has_dvb) {
+		printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
+		result = -EINVAL;
+
+		goto fail0;
+	}
+
 	bt = &bt878[bt878_num];
 	bt->dev = dev;
 	bt->nr = bt878_num;
@@ -416,6 +456,8 @@ static int __devinit bt878_probe(struct 
 
 	pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
 	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
 	printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
 	       bt878_num, bt->id, bt->revision, dev->bus->number,
 	       PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index a73baf0..9faf937 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -88,6 +88,23 @@
 
 #define BT878_RISC_SYNC_MASK	(1 << 15)
 
+
+#define BTTV_BOARD_UNKNOWN                 0x00
+#define BTTV_BOARD_PINNACLESAT             0x5e
+#define BTTV_BOARD_NEBULA_DIGITV           0x68
+#define BTTV_BOARD_PC_HDTV                 0x70
+#define BTTV_BOARD_TWINHAN_DST             0x71
+#define BTTV_BOARD_AVDVBT_771              0x7b
+#define BTTV_BOARD_AVDVBT_761              0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE         0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+struct cards {
+	__u32 pci_id;
+	__u16 card_id;
+	char  *name;
+};
+
 extern int bt878_num;
 
 struct bt878 {

Re: [PATCH 04/16] Fix [Bug 5895] to correct snd_87x autodetect

[Edgar Toernig]

mchehab@infradead.org wrote:
>
> --- a/drivers/media/dvb/bt8xx/bt878.c
> +++ b/drivers/media/dvb/bt8xx/bt878.c
> @@ -381,6 +381,23 @@ bt878_device_control(struct bt878 *bt, u
>  
>  EXPORT_SYMBOL(bt878_device_control);
>  
> +
> +struct cards card_list[] __devinitdata = {
> +
> +	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,	"Nebula Electronics DigiTV" },
> +	{ 0x07611461, BTTV_BOARD_AVDVBT_761,	"AverMedia AverTV DVB-T 761" },
>[...]

I'm not very familiar with the pci configuration logic but
what's the point of this list and the BTTV_BOARD_xxx defines?
The defines are never used and the list is only used to let
the probe routine fail when the device is not in the list.

Wouldn't it be cleaner to add them to the pci_device_id
list further down instead of requesting all subsystem ids?

| static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
|         {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BROOKTREE_878,
|          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|         {0,}
| };


Anyway, the bttv driver already has this information in his card
list (field has_dvb).  As long as the bt878 isn't stand alone
and requires the bttv driver wouldn't it be better to query its
table?


Even if this table is kept, it should be static and the variable
card_id in the probe routine should be renamed to pci_id as it
does not hold the card_id as defined in struct card but the pci_id.

Ciao, ET.

Re: [PATCH 04/16] Fix [Bug 5895] to correct snd_87x autodetect

[Manu Abraham]

Edgar Toernig wrote:
> mchehab@infradead.org wrote:
>   
>> --- a/drivers/media/dvb/bt8xx/bt878.c
>> +++ b/drivers/media/dvb/bt8xx/bt878.c
>> @@ -381,6 +381,23 @@ bt878_device_control(struct bt878 *bt, u
>>  
>>  EXPORT_SYMBOL(bt878_device_control);
>>  
>> +
>> +struct cards card_list[] __devinitdata = {
>> +
>> +	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,	"Nebula Electronics DigiTV" },
>> +	{ 0x07611461, BTTV_BOARD_AVDVBT_761,	"AverMedia AverTV DVB-T 761" },
>> [...]
>>     
>
> I'm not very familiar with the pci configuration logic but
> what's the point of this list and the BTTV_BOARD_xxx defines?
> The defines are never used and the list is only used to let
> the probe routine fail when the device is not in the list.
>   

Yes, that's the idea. The naming is for identification in the failed case.

> Anyway, the bttv driver already has this information in his card
> list (field has_dvb).  As long as the bt878 isn't stand alone
> and requires the bttv driver wouldn't it be better to query its
> table?
>
>   

This is only the interim fix for bug [5895] prior to the merge, as was 
discussed on the linux-dvb and video4linux mailing lists.
Thread: [linux-dvb] Re: [Fwd: [Bug 5895] With DVB drivers enabled 
snd_87x    (ALSA)    don't detect Broooktree audio]

> Even if this table is kept, it should be static
>   

Ack'd.


Thanks,
Manu

[PATCH 05/16] Add IR support to KWorld DVB-T (cx22702-based)

[mchehab]

From: Marco Manenti <marco_manenti@colman.it>

add IR support to KWorld DVB-T (cx22702-based)

Signed-off-by: Marco Manenti <marco_manenti@colman.it>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/cx88/cx88-input.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index da2ad5c..165d948 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -482,6 +482,7 @@ int cx88_ir_init(struct cx88_core *core,
 	switch (core->board) {
 	case CX88_BOARD_DNTV_LIVE_DVB_T:
 	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_KWORLD_DVB_T_CX22702:
 		ir_codes = ir_codes_dntv_live_dvb_t;
 		ir->gpio_addr = MO_GP1_IO;
 		ir->mask_keycode = 0x1f;

[PATCH 03/16] Added signal detection support to tvp5150

[mchehab]

From: Markus Rechberger <mrechberger@gmail.com>

- added signal detection support to tvp5150

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/tvp5150.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index a6330a3..1864423 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -896,6 +896,17 @@ static int tvp5150_command(struct i2c_cl
 		}
 	case DECODER_GET_STATUS:
 		{
+			int *iarg = arg;
+			int status;
+			int res=0;
+			status = tvp5150_read(c, 0x88);
+			if(status&0x08){
+				res |= DECODER_STATUS_COLOR;
+			}
+			if(status&0x04 && status&0x02){
+				res |= DECODER_STATUS_GOOD;
+			}
+			*iarg=res;
 			break;
 		}
 

[PATCH 06/16] Add standard for South Korean NTSC-M using A2 audio.

[mchehab]

From: Hans Verkuil <hverkuil@xs4all.nl>

South Korea uses NTSC-M but with A2 audio instead of BTSC. Several audio
chips need this information in order to set the correct audio processing
registers.

Acked-by: Mauro Carvalho Chehab <mauro_chehab@yahoo.com.br>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/bttv-driver.c          |    2 +
 drivers/media/video/cx25840/cx25840-core.c |   50 +++++++++++-----------------
 drivers/media/video/tda9887.c              |    7 +++-
 drivers/media/video/tuner-core.c           |    5 +++
 include/linux/videodev2.h                  |    4 ++
 5 files changed, 35 insertions(+), 33 deletions(-)

diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index aa4c4c5..578b200 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -214,7 +214,7 @@ const struct bttv_tvnorm bttv_tvnorms[] 
 		   we can capture, of the first and second field. */
 		.vbistart	= { 7,320 },
 	},{
-		.v4l2_id        = V4L2_STD_NTSC_M,
+		.v4l2_id        = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
 		.name           = "NTSC",
 		.Fsc            = 28636363,
 		.swidth         = 768,
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index c66c2c1..08ffd1f 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -220,33 +220,23 @@ static void input_change(struct i2c_clie
 		cx25840_write(client, 0x808, 0xff);
 		cx25840_write(client, 0x80b, 0x10);
 	} else if (std & V4L2_STD_NTSC) {
-		/* NTSC */
-		if (state->pvr150_workaround) {
-			/* Certain Hauppauge PVR150 models have a hardware bug
-			   that causes audio to drop out. For these models the
-			   audio standard must be set explicitly.
-			   To be precise: it affects cards with tuner models
-			   85, 99 and 112 (model numbers from tveeprom). */
-			if (std == V4L2_STD_NTSC_M_JP) {
-				/* Japan uses EIAJ audio standard */
-				cx25840_write(client, 0x808, 0x2f);
-			} else {
-				/* Others use the BTSC audio standard */
-				cx25840_write(client, 0x808, 0x1f);
-			}
-			/* South Korea uses the A2-M (aka Zweiton M) audio
-			   standard, and should set 0x808 to 0x3f, but I don't
-			   know how to detect this. */
-		} else if (std == V4L2_STD_NTSC_M_JP) {
+		/* Certain Hauppauge PVR150 models have a hardware bug
+		   that causes audio to drop out. For these models the
+		   audio standard must be set explicitly.
+		   To be precise: it affects cards with tuner models
+		   85, 99 and 112 (model numbers from tveeprom). */
+		int hw_fix = state->pvr150_workaround;
+
+		if (std == V4L2_STD_NTSC_M_JP) {
 			/* Japan uses EIAJ audio standard */
-			cx25840_write(client, 0x808, 0xf7);
+			cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7);
+		} else if (std == V4L2_STD_NTSC_M_KR) {
+			/* South Korea uses A2 audio standard */
+			cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8);
 		} else {
 			/* Others use the BTSC audio standard */
-			cx25840_write(client, 0x808, 0xf6);
+			cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
 		}
-		/* South Korea uses the A2-M (aka Zweiton M) audio standard,
-		   and should set 0x808 to 0xf8, but I don't know how to
-		   detect this. */
 		cx25840_write(client, 0x80b, 0x00);
 	}
 
@@ -330,17 +320,17 @@ static int set_v4lstd(struct i2c_client 
 	u8 fmt=0; 	/* zero is autodetect */
 
 	/* First tests should be against specific std */
-	if (std & V4L2_STD_NTSC_M_JP) {
+	if (std == V4L2_STD_NTSC_M_JP) {
 		fmt=0x2;
-	} else if (std & V4L2_STD_NTSC_443) {
+	} else if (std == V4L2_STD_NTSC_443) {
 		fmt=0x3;
-	} else if (std & V4L2_STD_PAL_M) {
+	} else if (std == V4L2_STD_PAL_M) {
 		fmt=0x5;
-	} else if (std & V4L2_STD_PAL_N) {
+	} else if (std == V4L2_STD_PAL_N) {
 		fmt=0x6;
-	} else if (std & V4L2_STD_PAL_Nc) {
+	} else if (std == V4L2_STD_PAL_Nc) {
 		fmt=0x7;
-	} else if (std & V4L2_STD_PAL_60) {
+	} else if (std == V4L2_STD_PAL_60) {
 		fmt=0x8;
 	} else {
 		/* Then, test against generic ones */
@@ -369,7 +359,7 @@ v4l2_std_id cx25840_get_v4lstd(struct i2
 	}
 
 	switch (fmt) {
-	case 0x1: return V4L2_STD_NTSC_M;
+	case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR;
 	case 0x2: return V4L2_STD_NTSC_M_JP;
 	case 0x3: return V4L2_STD_NTSC_443;
 	case 0x4: return V4L2_STD_PAL;
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 7c71422..0d54f6c 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -231,7 +231,7 @@ static struct tvnorm tvnorms[] = {
 			   cAudioIF_6_5   |
 			   cVideoIF_38_90 ),
 	},{
-		.std   = V4L2_STD_NTSC_M,
+		.std   = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
 		.name  = "NTSC-M",
 		.b     = ( cNegativeFmTV  |
 			   cQSS           ),
@@ -619,6 +619,11 @@ static int tda9887_fixup_std(struct tda9
 			tda9887_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
 			t->std = V4L2_STD_NTSC_M_JP;
 			break;
+		case 'k':
+		case 'K':
+			tda9887_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+			t->std = V4L2_STD_NTSC_M_KR;
+			break;
 		case '-':
 			/* default parameter, do nothing */
 			break;
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 873bf3d..e7ee619 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -366,6 +366,11 @@ static int tuner_fixup_std(struct tuner 
 			tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
 			t->std = V4L2_STD_NTSC_M_JP;
 			break;
+		case 'k':
+		case 'K':
+			tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+			t->std = V4L2_STD_NTSC_M_KR;
+			break;
 		case '-':
 			/* default parameter, do nothing */
 			break;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ce40675..839ccc7 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -628,6 +628,7 @@ typedef __u64 v4l2_std_id;
 #define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
 #define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
 #define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)
 
 #define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
 #define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
@@ -660,7 +661,8 @@ typedef __u64 v4l2_std_id;
 				 V4L2_STD_PAL_H		|\
 				 V4L2_STD_PAL_I)
 #define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
-				 V4L2_STD_NTSC_M_JP)
+				 V4L2_STD_NTSC_M_JP     |\
+				 V4L2_STD_NTSC_M_KR)
 #define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
 				 V4L2_STD_SECAM_K	|\
 				 V4L2_STD_SECAM_K1)

[PATCH 07/16] Fixed i2c return value, conversion mdelay to msleep

[mchehab]

From: Markus Rechberger <mrechberger@gmail.com>

fixed i2c return value, conversion mdelay to msleep

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/em28xx/em28xx-core.c |   15 +++++++++++++--
 drivers/media/video/em28xx/em28xx-i2c.c  |    8 ++++----
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 82f0c5f..e5ee8bc 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -139,6 +139,9 @@ int em28xx_read_reg_req_len(struct em28x
 {
 	int ret, byte;
 
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
 	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -165,6 +168,9 @@ int em28xx_read_reg_req(struct em28xx *d
 	u8 val;
 	int ret;
 
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
 	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -195,7 +201,12 @@ int em28xx_write_regs_req(struct em28xx 
 	int ret;
 
 	/*usb_control_msg seems to expect a kmalloced buffer */
-	unsigned char *bufs = kmalloc(len, GFP_KERNEL);
+	unsigned char *bufs;
+
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
+	bufs = kmalloc(len, GFP_KERNEL);
 
 	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
 
@@ -212,7 +223,7 @@ int em28xx_write_regs_req(struct em28xx 
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0000, reg, bufs, len, HZ);
-	mdelay(5);		/* FIXME: magic number */
+	msleep(5);		/* FIXME: magic number */
 	kfree(bufs);
 	return ret;
 }
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 0591a70..6ca8631 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -78,7 +78,7 @@ static int em2800_i2c_send_max4(struct e
 		ret = dev->em28xx_read_reg(dev, 0x05);
 		if (ret == 0x80 + len - 1)
 			return len;
-		mdelay(5);
+		msleep(5);
 	}
 	em28xx_warn("i2c write timed out\n");
 	return -EIO;
@@ -138,7 +138,7 @@ static int em2800_i2c_check_for_device(s
 			return -ENODEV;
 		else if (msg == 0x84)
 			return 0;
-		mdelay(5);
+		msleep(5);
 	}
 	return -ENODEV;
 }
@@ -278,9 +278,9 @@ static int em28xx_i2c_xfer(struct i2c_ad
 							   msgs[i].buf,
 							   msgs[i].len,
 							   i == num - 1);
-			if (rc < 0)
-				goto err;
 		}
+		if (rc < 0)
+			goto err;
 		if (i2c_debug>=2)
 			printk("\n");
 	}

Re: [v4l-dvb-maintainer] [PATCH 07/16] Fixed i2c return value, conversion mdelay to msleep

[Andreas Oberritter]

Hi,

On Tue, 2006-02-07 at 13:33 -0200, mchehab@infradead.org wrote:
> @@ -165,6 +168,9 @@ int em28xx_read_reg_req(struct em28xx *d
>  	u8 val;
>  	int ret;
>  
> +	if (dev->state & DEV_DISCONNECTED)
> +		return(-ENODEV);

This looks like return was a function and is very uncommon for kernel
coding style.

> +
>  	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
>  
>  	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
> @@ -195,7 +201,12 @@ int em28xx_write_regs_req(struct em28xx 
>  	int ret;
>  
>  	/*usb_control_msg seems to expect a kmalloced buffer */
> -	unsigned char *bufs = kmalloc(len, GFP_KERNEL);
> +	unsigned char *bufs;
> +
> +	if (dev->state & DEV_DISCONNECTED)
> +		return(-ENODEV);

Same as obove.

> +
> +	bufs = kmalloc(len, GFP_KERNEL);

I think you should add this:

          if (bufs == NULL)
                  return -ENOMEM;

Best regards,
Andreas

Re: [v4l-dvb-maintainer] [PATCH 07/16] Fixed i2c return value, conversion mdelay to msleep

[Markus Rechberger]

Hi,

this is actually not needed but it saves as introduced by Luca Risolia
some CPU cycles. USB Devices might come and go whenever the user feels
he has to plug or unplug it.

On 2/7/06, Andreas Oberritter <obi@linuxtv.org> wrote:
> Hi,
>
> On Tue, 2006-02-07 at 13:33 -0200, mchehab@infradead.org wrote:
> > @@ -165,6 +168,9 @@ int em28xx_read_reg_req(struct em28xx *d
> >       u8 val;
> >       int ret;
> >
> > +     if (dev->state & DEV_DISCONNECTED)
> > +             return(-ENODEV);
>
> This looks like return was a function and is very uncommon for kernel
> coding style.
>
> > +
> >       em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
> >
> >       ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
> > @@ -195,7 +201,12 @@ int em28xx_write_regs_req(struct em28xx
> >       int ret;
> >
> >       /*usb_control_msg seems to expect a kmalloced buffer */
> > -     unsigned char *bufs = kmalloc(len, GFP_KERNEL);
> > +     unsigned char *bufs;
> > +
> > +     if (dev->state & DEV_DISCONNECTED)
> > +             return(-ENODEV);
>
> Same as obove.
>
> > +
> > +     bufs = kmalloc(len, GFP_KERNEL);
>
> I think you should add this:
>
>           if (bufs == NULL)
>                   return -ENOMEM;

right, submit a patch? :)

>
> Best regards,
> Andreas
>
>

Markus

[PATCH 09/16] Use parallel transport for FusionHDTV Dual Digital USB

[mchehab]

From: Chris Pascoe <c.pascoe@itee.uq.edu.au>

Use the parallel transport function of the MT352 in USB demodulator of the
Dual Digital board.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/dvb-usb/cxusb.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index f140037..650536a 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -234,7 +234,7 @@ static struct dvb_usb_rc_key dvico_mce_r
 
 static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x38 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };

[PATCH 10/16] Use MT352 parallel transport function for all Bluebird FusionHDTV DVB-T boxes.

[mchehab]

From: Michael Krufky <mkrufky@linuxtv.org>

Use the parallel transport function of the MT352 demodulator in
TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/dvb-usb/cxusb.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 650536a..f327fac 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -255,7 +255,7 @@ static int cxusb_dee1601_demod_init(stru
 
 static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
 {	/* used in both lgz201 and th7579 */
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x39 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x29 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x24, 0x20 };

[PATCH 08/16] Support for Galaxis DVB-S rev1.3

[mchehab]

From: Oliver Endriss <o.endriss@gmx.de>

support for Galaxis DVB-S rev1.3 (subsystem 13c2:0004)

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/ttpci/av7110.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)

diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 2749490..d36369e 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2329,6 +2329,17 @@ static int frontend_init(struct av7110 *
 			av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
 			break;
 
+		case 0x0004: // Galaxis DVB-S rev1.3
+			/* ALPS BSRV2 */
+			av7110->fe = ves1x93_attach(&alps_bsrv2_config, &av7110->i2c_adap);
+			if (av7110->fe) {
+				av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
+				av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
+				av7110->fe->ops->set_tone = av7110_set_tone;
+				av7110->recover = dvb_s_recover;
+			}
+			break;
+
 		case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
 			/* Grundig 29504-451 */
 			av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
@@ -2930,6 +2941,7 @@ MAKE_AV7110_INFO(tts_1_3se,  "Technotren
 MAKE_AV7110_INFO(ttt,        "Technotrend/Hauppauge DVB-T");
 MAKE_AV7110_INFO(fsc,        "Fujitsu Siemens DVB-C");
 MAKE_AV7110_INFO(fss,        "Fujitsu Siemens DVB-S rev1.6");
+MAKE_AV7110_INFO(gxs_1_3,    "Galaxis DVB-S rev1.3");
 
 static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(fsc,         0x110a, 0x0000),
@@ -2937,13 +2949,13 @@ static struct pci_device_id pci_tbl[] = 
 	MAKE_EXTENSION_PCI(ttt_1_X,     0x13c2, 0x0001),
 	MAKE_EXTENSION_PCI(ttc_2_X,     0x13c2, 0x0002),
 	MAKE_EXTENSION_PCI(tts_2_X,     0x13c2, 0x0003),
+	MAKE_EXTENSION_PCI(gxs_1_3,     0x13c2, 0x0004),
 	MAKE_EXTENSION_PCI(fss,         0x13c2, 0x0006),
 	MAKE_EXTENSION_PCI(ttt,         0x13c2, 0x0008),
 	MAKE_EXTENSION_PCI(ttc_1_X,     0x13c2, 0x000a),
 	MAKE_EXTENSION_PCI(tts_2_3,     0x13c2, 0x000e),
 	MAKE_EXTENSION_PCI(tts_1_3se,   0x13c2, 0x1002),
 
-/*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v????
 

[PATCH 11/16] FIX: Multiple usage of VP7045-based devices

[mchehab]

From: Patrick Boettcher <pb@linuxtv.org>

Reassigning function pointers in a static led to infinite loops when using
multiple VP7045-based device at the same time on one system. Using kmalloc'd
copies for reassignments is better.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/dvb-usb/vp7045-fe.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c
index 5242cca..9999336 100644
--- a/drivers/media/dvb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c
@@ -23,10 +23,11 @@
 
 struct vp7045_fe_state {
 	struct dvb_frontend fe;
+	struct dvb_frontend_ops ops;
+
 	struct dvb_usb_device *d;
 };
 
-
 static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
 {
 	struct vp7045_fe_state *state = fe->demodulator_priv;
@@ -150,7 +151,8 @@ struct dvb_frontend * vp7045_fe_attach(s
 		goto error;
 
 	s->d = d;
-	s->fe.ops = &vp7045_fe_ops;
+	memcpy(&s->ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
+	s->fe.ops = &s->ops;
 	s->fe.demodulator_priv = s;
 
 	goto success;

[PATCH 12/16] FIX: Check if FW was downloaded or not + new firmware file

[mchehab]

From: Patrick Boettcher <pb@linuxtv.org>

- When a firmware was downloaded dvb_usb_device_init returns NULL for the
  dvb_usb_device, then nothing should be done with that pointer and device,
  because it will re-enumerate.
- A new firmware should be used with digitv devices. 
- It should make "slave"-devices work and others, too.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/dvb-usb/digitv.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index e6c55c9..caa1346 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -175,11 +175,13 @@ static int digitv_probe(struct usb_inter
 	if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
 		u8 b[4] = { 0 };
 
-		b[0] = 1;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+		if (d != NULL) { /* do that only when the firmware is loaded */
+			b[0] = 1;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
 
-		b[0] = 0;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+			b[0] = 0;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+		}
 	}
 	return ret;
 }
@@ -194,7 +196,7 @@ static struct dvb_usb_properties digitv_
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 
 	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-digitv-01.fw",
+	.firmware = "dvb-usb-digitv-02.fw",
 
 	.size_of_priv     = 0,
 
@@ -229,6 +231,7 @@ static struct dvb_usb_properties digitv_
 			{ &digitv_table[0], NULL },
 			{ NULL },
 		},
+		{ NULL },
 	}
 };
 

[PATCH 14/16] fix saa7146 kobject register failure

[mchehab]

From: Dave Jones <davej@redhat.com>

Whoops.

kobject_register failed for hexium HV-PCI6/Orion (-13)
[<c01d3eb6>] kobject_register+0x31/0x47
[<c023a996>] bus_add_driver+0x4a/0xfd
[<c01de3c1>] __pci_register_driver+0x82/0xa4
[<d083400a>] hexium_init_module+0xa/0x47 [hexium_orion]
[<c013bdae>] sys_init_module+0x167b/0x1822
[<c01633f7>] do_sync_read+0xb8/0xf3
[<c0133fa3>] autoremove_wake_function+0x0/0x2d
[<c0145390>] audit_syscall_entry+0x118/0x13f
[<c0106ae2>] do_syscall_trace+0x104/0x14a
[<c0103d21>] syscall_call+0x7/0xb

slashes in kobject names aren't allowed.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/hexium_orion.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 0b6c209..aad4a18 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -484,7 +484,7 @@ static struct saa7146_ext_vv vv_data = {
 };
 
 static struct saa7146_extension extension = {
-	.name = "hexium HV-PCI6/Orion",
+	.name = "hexium HV-PCI6 Orion",
 	.flags = 0,		// SAA7146_USE_I2C_IRQ,
 
 	.pci_tbl = &pci_tbl[0],

[PATCH 15/16] DVB: remove the at76c651/tda80xx frontends

[mchehab]

From: Adrian Bunk <bunk@stusta.de>

The at76c651 and tda80xx frontends are currently completely unused, IOW
their only effect is making the kernel larger for people accitentially
enabling them.

The current in-kernel drivers differ from the drivers at cvs.tuxbox.org,
and re-adding them when parts of the dbox2 project get merged should be
trivial.


Signed-off-by: Adrian Bunk <bunk@stusta.de>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/dvb/frontends/Kconfig    |   12 -
 drivers/media/dvb/frontends/Makefile   |    2 
 drivers/media/dvb/frontends/at76c651.c |  450 --------------------
 drivers/media/dvb/frontends/at76c651.h |   47 --
 drivers/media/dvb/frontends/tda80xx.c  |  734 --------------------------------
 drivers/media/dvb/frontends/tda80xx.h  |   51 --
 6 files changed, 0 insertions(+), 1296 deletions(-)

diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index f09e3da..76b6a2a 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -28,12 +28,6 @@ config DVB_TDA8083
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
-config DVB_TDA80XX
-	tristate "Philips TDA8044 or TDA8083 based"
-	depends on DVB_CORE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
 config DVB_MT312
 	tristate "Zarlink MT312 based"
 	depends on DVB_CORE
@@ -139,12 +133,6 @@ config DVB_DIB3000MC
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 
-config DVB_ATMEL_AT76C651
-	tristate "Atmel AT76C651 based"
-	depends on DVB_CORE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
 	depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 8f30146..1af769c 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_DVB_CORE) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
 obj-$(CONFIG_DVB_SP8870) += sp8870.o
 obj-$(CONFIG_DVB_CX22700) += cx22700.o
-obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
 obj-$(CONFIG_DVB_CX24110) += cx24110.o
 obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
@@ -22,7 +21,6 @@ obj-$(CONFIG_DVB_SP887X) += sp887x.o
 obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
-obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
 obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
deleted file mode 100644
index 8e0f4b3..0000000
--- a/drivers/media/dvb/frontends/at76c651.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651/tua6010xs)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- *             & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *             & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-#include "dvb_frontend.h"
-#include "at76c651.h"
-
-
-struct at76c651_state {
-
-	struct i2c_adapter* i2c;
-
-	struct dvb_frontend_ops ops;
-
-	const struct at76c651_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* revision of the chip */
-	u8 revision;
-
-	/* last QAM value set */
-	u8 qam;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "at76c651: " args); \
-	} while (0)
-
-
-#if ! defined(__powerpc__)
-static __inline__ int __ilog2(unsigned long x)
-{
-	int i;
-
-	if (x == 0)
-		return -1;
-
-	for (i = 0; x != 0; i++)
-		x >>= 1;
-
-	return i - 1;
-}
-#endif
-
-static int at76c651_writereg(struct at76c651_state* state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg =
-		{ .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error "
-			"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
-			__FUNCTION__, reg, data, ret);
-
-	msleep(10);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static u8 at76c651_readreg(struct at76c651_state* state, u8 reg)
-{
-	int ret;
-	u8 val;
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = &val, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
-
-	return val;
-}
-
-static int at76c651_reset(struct at76c651_state* state)
-{
-	return at76c651_writereg(state, 0x07, 0x01);
-}
-
-static void at76c651_disable_interrupts(struct at76c651_state* state)
-{
-	at76c651_writereg(state, 0x0b, 0x00);
-}
-
-static int at76c651_set_auto_config(struct at76c651_state *state)
-{
-	/*
-	 * Autoconfig
-	 */
-
-	at76c651_writereg(state, 0x06, 0x01);
-
-	/*
-	 * Performance optimizations, should be done after autoconfig
-	 */
-
-	at76c651_writereg(state, 0x10, 0x06);
-	at76c651_writereg(state, 0x11, ((state->qam == 5) || (state->qam == 7)) ? 0x12 : 0x10);
-	at76c651_writereg(state, 0x15, 0x28);
-	at76c651_writereg(state, 0x20, 0x09);
-	at76c651_writereg(state, 0x24, ((state->qam == 5) || (state->qam == 7)) ? 0xC0 : 0x90);
-	at76c651_writereg(state, 0x30, 0x90);
-	if (state->qam == 5)
-		at76c651_writereg(state, 0x35, 0x2A);
-
-	/*
-	 * Initialize A/D-converter
-	 */
-
-	if (state->revision == 0x11) {
-		at76c651_writereg(state, 0x2E, 0x38);
-		at76c651_writereg(state, 0x2F, 0x13);
-	}
-
-	at76c651_disable_interrupts(state);
-
-	/*
-	 * Restart operation
-	 */
-
-	at76c651_reset(state);
-
-	return 0;
-}
-
-static void at76c651_set_bbfreq(struct at76c651_state* state)
-{
-	at76c651_writereg(state, 0x04, 0x3f);
-	at76c651_writereg(state, 0x05, 0xee);
-}
-
-static int at76c651_set_symbol_rate(struct at76c651_state* state, u32 symbol_rate)
-{
-	u8 exponent;
-	u32 mantissa;
-
-	if (symbol_rate > 9360000)
-		return -EINVAL;
-
-	/*
-	 * FREF = 57800 kHz
-	 * exponent = 10 + floor (log2(symbol_rate / FREF))
-	 * mantissa = (symbol_rate / FREF) * (1 << (30 - exponent))
-	 */
-
-	exponent = __ilog2((symbol_rate << 4) / 903125);
-	mantissa = ((symbol_rate / 3125) * (1 << (24 - exponent))) / 289;
-
-	at76c651_writereg(state, 0x00, mantissa >> 13);
-	at76c651_writereg(state, 0x01, mantissa >> 5);
-	at76c651_writereg(state, 0x02, (mantissa << 3) | exponent);
-
-	return 0;
-}
-
-static int at76c651_set_qam(struct at76c651_state *state, fe_modulation_t qam)
-{
-	switch (qam) {
-	case QPSK:
-		state->qam = 0x02;
-		break;
-	case QAM_16:
-		state->qam = 0x04;
-		break;
-	case QAM_32:
-		state->qam = 0x05;
-		break;
-	case QAM_64:
-		state->qam = 0x06;
-		break;
-	case QAM_128:
-		state->qam = 0x07;
-		break;
-	case QAM_256:
-		state->qam = 0x08;
-		break;
-#if 0
-	case QAM_512:
-		state->qam = 0x09;
-		break;
-	case QAM_1024:
-		state->qam = 0x0A;
-		break;
-#endif
-	default:
-		return -EINVAL;
-
-	}
-
-	return at76c651_writereg(state, 0x03, state->qam);
-}
-
-static int at76c651_set_inversion(struct at76c651_state* state, fe_spectral_inversion_t inversion)
-{
-	u8 feciqinv = at76c651_readreg(state, 0x60);
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		feciqinv |= 0x02;
-		feciqinv &= 0xFE;
-		break;
-
-	case INVERSION_ON:
-		feciqinv |= 0x03;
-		break;
-
-	case INVERSION_AUTO:
-		feciqinv &= 0xFC;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return at76c651_writereg(state, 0x60, feciqinv);
-}
-
-static int at76c651_set_parameters(struct dvb_frontend* fe,
-				   struct dvb_frontend_parameters *p)
-{
-	int ret;
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	at76c651_writereg(state, 0x0c, 0xc3);
-	state->config->pll_set(fe, p);
-	at76c651_writereg(state, 0x0c, 0xc2);
-
-	if ((ret = at76c651_set_symbol_rate(state, p->u.qam.symbol_rate)))
-		return ret;
-
-	if ((ret = at76c651_set_inversion(state, p->inversion)))
-		return ret;
-
-	return at76c651_set_auto_config(state);
-}
-
-static int at76c651_set_defaults(struct dvb_frontend* fe)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	at76c651_set_symbol_rate(state, 6900000);
-	at76c651_set_qam(state, QAM_64);
-	at76c651_set_bbfreq(state);
-	at76c651_set_auto_config(state);
-
-	if (state->config->pll_init) {
-		at76c651_writereg(state, 0x0c, 0xc3);
-		state->config->pll_init(fe);
-		at76c651_writereg(state, 0x0c, 0xc2);
-	}
-
-	return 0;
-}
-
-static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-	u8 sync;
-
-	/*
-	 * Bits: FEC, CAR, EQU, TIM, AGC2, AGC1, ADC, PLL (PLL=0)
-	 */
-	sync = at76c651_readreg(state, 0x80);
-	*status = 0;
-
-	if (sync & (0x04 | 0x10))	/* AGC1 || TIM */
-		*status |= FE_HAS_SIGNAL;
-	if (sync & 0x10)		/* TIM */
-		*status |= FE_HAS_CARRIER;
-	if (sync & 0x80)		/* FEC */
-		*status |= FE_HAS_VITERBI;
-	if (sync & 0x40)		/* CAR */
-		*status |= FE_HAS_SYNC;
-	if ((sync & 0xF0) == 0xF0)	/* TIM && EQU && CAR && FEC */
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	*ber = (at76c651_readreg(state, 0x81) & 0x0F) << 16;
-	*ber |= at76c651_readreg(state, 0x82) << 8;
-	*ber |= at76c651_readreg(state, 0x83);
-	*ber *= 10;
-
-	return 0;
-}
-
-static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	u8 gain = ~at76c651_readreg(state, 0x91);
-	*strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	*snr = 0xFFFF -
-	    ((at76c651_readreg(state, 0x8F) << 8) |
-	     at76c651_readreg(state, 0x90));
-
-	return 0;
-}
-
-static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	*ucblocks = at76c651_readreg(state, 0x82);
-
-	return 0;
-}
-
-static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 50;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void at76c651_release(struct dvb_frontend* fe)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops at76c651_ops;
-
-struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct at76c651_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->qam = 0;
-
-	/* check if the demod is there */
-	if (at76c651_readreg(state, 0x0e) != 0x65) goto error;
-
-	/* finalise state setup */
-	state->i2c = i2c;
-	state->revision = at76c651_readreg(state, 0x0f) & 0xfe;
-	memcpy(&state->ops, &at76c651_ops, sizeof(struct dvb_frontend_ops));
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops at76c651_ops = {
-
-	.info = {
-		.name = "Atmel AT76C651B DVB-C",
-		.type = FE_QAM,
-		.frequency_min = 48250000,
-		.frequency_max = 863250000,
-		.frequency_stepsize = 62500,
-		/*.frequency_tolerance = */	/* FIXME: 12% of SR */
-		.symbol_rate_min = 0,		/* FIXME */
-		.symbol_rate_max = 9360000,	/* FIXME */
-		.symbol_rate_tolerance = 4000,
-		.caps = FE_CAN_INVERSION_AUTO |
-		    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		    FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-		    FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-		    FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | FE_CAN_QAM_128 |
-		    FE_CAN_MUTE_TS | FE_CAN_QAM_256 | FE_CAN_RECOVER
-	},
-
-	.release = at76c651_release,
-
-	.init = at76c651_set_defaults,
-
-	.set_frontend = at76c651_set_parameters,
-	.get_tune_settings = at76c651_get_tune_settings,
-
-	.read_status = at76c651_read_status,
-	.read_ber = at76c651_read_ber,
-	.read_signal_strength = at76c651_read_signal_strength,
-	.read_snr = at76c651_read_snr,
-	.read_ucblocks = at76c651_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Atmel AT76C651 DVB-C Demodulator Driver");
-MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(at76c651_attach);
diff --git a/drivers/media/dvb/frontends/at76c651.h b/drivers/media/dvb/frontends/at76c651.h
deleted file mode 100644
index 34054df..0000000
--- a/drivers/media/dvb/frontends/at76c651.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- *             & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *             & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#ifndef AT76C651_H
-#define AT76C651_H
-
-#include <linux/dvb/frontend.h>
-
-struct at76c651_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* PLL maintenance */
-	int (*pll_init)(struct dvb_frontend* fe);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
-					    struct i2c_adapter* i2c);
-
-#endif // AT76C651_H
diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c
deleted file mode 100644
index d1cabb6..0000000
--- a/drivers/media/dvb/frontends/tda80xx.c
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/config.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "tda80xx.h"
-
-enum {
-	ID_TDA8044 = 0x04,
-	ID_TDA8083 = 0x05,
-};
-
-
-struct tda80xx_state {
-
-	struct i2c_adapter* i2c;
-
-	struct dvb_frontend_ops ops;
-
-	/* configuration settings */
-	const struct tda80xx_config* config;
-
-	struct dvb_frontend frontend;
-
-	u32 clk;
-	int afc_loop;
-	struct work_struct worklet;
-	fe_code_rate_t code_rate;
-	fe_spectral_inversion_t spectral_inversion;
-	fe_status_t status;
-	u8 id;
-};
-
-static int debug = 1;
-#define dprintk	if (debug) printk
-
-static u8 tda8044_inittab_pre[] = {
-	0x02, 0x00, 0x6f, 0xb5, 0x86, 0x22, 0x00, 0xea,
-	0x30, 0x42, 0x98, 0x68, 0x70, 0x42, 0x99, 0x58,
-	0x95, 0x10, 0xf5, 0xe7, 0x93, 0x0b, 0x15, 0x68,
-	0x9a, 0x90, 0x61, 0x80, 0x00, 0xe0, 0x40, 0x00,
-	0x0f, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00
-};
-
-static u8 tda8044_inittab_post[] = {
-	0x04, 0x00, 0x6f, 0xb5, 0x86, 0x22, 0x00, 0xea,
-	0x30, 0x42, 0x98, 0x68, 0x70, 0x42, 0x99, 0x50,
-	0x95, 0x10, 0xf5, 0xe7, 0x93, 0x0b, 0x15, 0x68,
-	0x9a, 0x90, 0x61, 0x80, 0x00, 0xe0, 0x40, 0x6c,
-	0x0f, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00
-};
-
-static u8 tda8083_inittab[] = {
-	0x04, 0x00, 0x4a, 0x79, 0x04, 0x00, 0xff, 0xea,
-	0x48, 0x42, 0x79, 0x60, 0x70, 0x52, 0x9a, 0x10,
-	0x0e, 0x10, 0xf2, 0xa7, 0x93, 0x0b, 0x05, 0xc8,
-	0x9d, 0x00, 0x42, 0x80, 0x00, 0x60, 0x40, 0x00,
-	0x00, 0x75, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static __inline__ u32 tda80xx_div(u32 a, u32 b)
-{
-	return (a + (b / 2)) / b;
-}
-
-static __inline__ u32 tda80xx_gcd(u32 a, u32 b)
-{
-	u32 r;
-
-	while ((r = a % b)) {
-		a = b;
-		b = r;
-	}
-
-	return b;
-}
-
-static int tda80xx_read(struct tda80xx_state* state, u8 reg, u8 *buf, u8 len)
-{
-	int ret;
-	struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = &reg, .len = 1 },
-			  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (reg %02x, ret == %i)\n",
-				__FUNCTION__, reg, ret);
-
-	mdelay(10);
-
-	return (ret == 2) ? 0 : -EREMOTEIO;
-}
-
-static int tda80xx_write(struct tda80xx_state* state, u8 reg, const u8 *buf, u8 len)
-{
-	int ret;
-	u8 wbuf[len + 1];
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = wbuf, .len = len + 1 };
-
-	wbuf[0] = reg;
-	memcpy(&wbuf[1], buf, len);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: i2c xfer error (ret == %i)\n", __FUNCTION__, ret);
-
-	mdelay(10);
-
-	return (ret == 1) ? 0 : -EREMOTEIO;
-}
-
-static __inline__ u8 tda80xx_readreg(struct tda80xx_state* state, u8 reg)
-{
-	u8 val;
-
-	tda80xx_read(state, reg, &val, 1);
-
-	return val;
-}
-
-static __inline__ int tda80xx_writereg(struct tda80xx_state* state, u8 reg, u8 data)
-{
-	return tda80xx_write(state, reg, &data, 1);
-}
-
-static int tda80xx_set_parameters(struct tda80xx_state* state,
-				  fe_spectral_inversion_t inversion,
-				  u32 symbol_rate,
-				  fe_code_rate_t fec_inner)
-{
-	u8 buf[15];
-	u64 ratio;
-	u32 clk;
-	u32 k;
-	u32 sr = symbol_rate;
-	u32 gcd;
-	u8 scd;
-
-	if (symbol_rate > (state->clk * 3) / 16)
-		scd = 0;
-	else if (symbol_rate > (state->clk * 3) / 32)
-		scd = 1;
-	else if (symbol_rate > (state->clk * 3) / 64)
-		scd = 2;
-	else
-		scd = 3;
-
-	clk = scd ? (state->clk / (scd * 2)) : state->clk;
-
-	/*
-	 * Viterbi decoder:
-	 * Differential decoding off
-	 * Spectral inversion unknown
-	 * QPSK modulation
-	 */
-	if (inversion == INVERSION_ON)
-		buf[0] = 0x60;
-	else if (inversion == INVERSION_OFF)
-		buf[0] = 0x20;
-	else
-		buf[0] = 0x00;
-
-	/*
-	 * CLK ratio:
-	 * system clock frequency is up to 64 or 96 MHz
-	 *
-	 * formula:
-	 * r = k * clk / symbol_rate
-	 *
-	 * k:	2^21 for caa 0..3,
-	 *	2^20 for caa 4..5,
-	 *	2^19 for caa 6..7
-	 */
-	if (symbol_rate <= (clk * 3) / 32)
-		k = (1 << 19);
-	else if (symbol_rate <= (clk * 3) / 16)
-		k = (1 << 20);
-	else
-		k = (1 << 21);
-
-	gcd = tda80xx_gcd(clk, sr);
-	clk /= gcd;
-	sr /= gcd;
-
-	gcd = tda80xx_gcd(k, sr);
-	k /= gcd;
-	sr /= gcd;
-
-	ratio = (u64)k * (u64)clk;
-	do_div(ratio, sr);
-
-	buf[1] = ratio >> 16;
-	buf[2] = ratio >> 8;
-	buf[3] = ratio;
-
-	/* nyquist filter roll-off factor 35% */
-	buf[4] = 0x20;
-
-	clk = scd ? (state->clk / (scd * 2)) : state->clk;
-
-	/* Anti Alias Filter */
-	if (symbol_rate < (clk * 3) / 64)
-		printk("tda80xx: unsupported symbol rate: %u\n", symbol_rate);
-	else if (symbol_rate <= clk / 16)
-		buf[4] |= 0x07;
-	else if (symbol_rate <= (clk * 3) / 32)
-		buf[4] |= 0x06;
-	else if (symbol_rate <= clk / 8)
-		buf[4] |= 0x05;
-	else if (symbol_rate <= (clk * 3) / 16)
-		buf[4] |= 0x04;
-	else if (symbol_rate <= clk / 4)
-		buf[4] |= 0x03;
-	else if (symbol_rate <= (clk * 3) / 8)
-		buf[4] |= 0x02;
-	else if (symbol_rate <= clk / 2)
-		buf[4] |= 0x01;
-	else
-		buf[4] |= 0x00;
-
-	/* Sigma Delta converter */
-	buf[5] = 0x00;
-
-	/* FEC: Possible puncturing rates */
-	if (fec_inner == FEC_NONE)
-		buf[6] = 0x00;
-	else if ((fec_inner >= FEC_1_2) && (fec_inner <= FEC_8_9))
-		buf[6] = (1 << (8 - fec_inner));
-	else if (fec_inner == FEC_AUTO)
-		buf[6] = 0xff;
-	else
-		return -EINVAL;
-
-	/* carrier lock detector threshold value */
-	buf[7] = 0x30;
-	/* AFC1: proportional part settings */
-	buf[8] = 0x42;
-	/* AFC1: integral part settings */
-	buf[9] = 0x98;
-	/* PD: Leaky integrator SCPC mode */
-	buf[10] = 0x28;
-	/* AFC2, AFC1 controls */
-	buf[11] = 0x30;
-	/* PD: proportional part settings */
-	buf[12] = 0x42;
-	/* PD: integral part settings */
-	buf[13] = 0x99;
-	/* AGC */
-	buf[14] = 0x50 | scd;
-
-	printk("symbol_rate=%u clk=%u\n", symbol_rate, clk);
-
-	return tda80xx_write(state, 0x01, buf, sizeof(buf));
-}
-
-static int tda80xx_set_clk(struct tda80xx_state* state)
-{
-	u8 buf[2];
-
-	/* CLK proportional part */
-	buf[0] = (0x06 << 5) | 0x08;	/* CMP[2:0], CSP[4:0] */
-	/* CLK integral part */
-	buf[1] = (0x04 << 5) | 0x1a;	/* CMI[2:0], CSI[4:0] */
-
-	return tda80xx_write(state, 0x17, buf, sizeof(buf));
-}
-
-#if 0
-static int tda80xx_set_scpc_freq_offset(struct tda80xx_state* state)
-{
-	/* a constant value is nonsense here imho */
-	return tda80xx_writereg(state, 0x22, 0xf9);
-}
-#endif
-
-static int tda80xx_close_loop(struct tda80xx_state* state)
-{
-	u8 buf[2];
-
-	/* PD: Loop closed, LD: lock detect enable, SCPC: Sweep mode - AFC1 loop closed */
-	buf[0] = 0x68;
-	/* AFC1: Loop closed, CAR Feedback: 8192 */
-	buf[1] = 0x70;
-
-	return tda80xx_write(state, 0x0b, buf, sizeof(buf));
-}
-
-static irqreturn_t tda80xx_irq(int irq, void *priv, struct pt_regs *pt)
-{
-	schedule_work(priv);
-
-	return IRQ_HANDLED;
-}
-
-static void tda80xx_read_status_int(struct tda80xx_state* state)
-{
-	u8 val;
-
-	static const fe_spectral_inversion_t inv_tab[] = {
-		INVERSION_OFF, INVERSION_ON
-	};
-
-	static const fe_code_rate_t fec_tab[] = {
-		FEC_8_9, FEC_1_2, FEC_2_3, FEC_3_4,
-		FEC_4_5, FEC_5_6, FEC_6_7, FEC_7_8,
-	};
-
-	val = tda80xx_readreg(state, 0x02);
-
-	state->status = 0;
-
-	if (val & 0x01) /* demodulator lock */
-		state->status |= FE_HAS_SIGNAL;
-	if (val & 0x02) /* clock recovery lock */
-		state->status |= FE_HAS_CARRIER;
-	if (val & 0x04) /* viterbi lock */
-		state->status |= FE_HAS_VITERBI;
-	if (val & 0x08) /* deinterleaver lock (packet sync) */
-		state->status |= FE_HAS_SYNC;
-	if (val & 0x10) /* derandomizer lock (frame sync) */
-		state->status |= FE_HAS_LOCK;
-	if (val & 0x20) /* frontend can not lock */
-		state->status |= FE_TIMEDOUT;
-
-	if ((state->status & (FE_HAS_CARRIER)) && (state->afc_loop)) {
-		printk("tda80xx: closing loop\n");
-		tda80xx_close_loop(state);
-		state->afc_loop = 0;
-	}
-
-	if (state->status & (FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK)) {
-		val = tda80xx_readreg(state, 0x0e);
-		state->code_rate = fec_tab[val & 0x07];
-		if (state->status & (FE_HAS_SYNC | FE_HAS_LOCK))
-			state->spectral_inversion = inv_tab[(val >> 7) & 0x01];
-		else
-			state->spectral_inversion = INVERSION_AUTO;
-	}
-	else {
-		state->code_rate = FEC_AUTO;
-	}
-}
-
-static void tda80xx_worklet(void *priv)
-{
-	struct tda80xx_state *state = priv;
-
-	tda80xx_writereg(state, 0x00, 0x04);
-	enable_irq(state->config->irq);
-
-	tda80xx_read_status_int(state);
-}
-
-static void tda80xx_wait_diseqc_fifo(struct tda80xx_state* state)
-{
-	size_t i;
-
-	for (i = 0; i < 100; i++) {
-		if (tda80xx_readreg(state, 0x02) & 0x80)
-			break;
-		msleep(10);
-	}
-}
-
-static int tda8044_init(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-	int ret;
-
-	/*
-	 * this function is a mess...
-	 */
-
-	if ((ret = tda80xx_write(state, 0x00, tda8044_inittab_pre, sizeof(tda8044_inittab_pre))))
-		return ret;
-
-	tda80xx_writereg(state, 0x0f, 0x50);
-#if 1
-	tda80xx_writereg(state, 0x20, 0x8F);		/* FIXME */
-	tda80xx_writereg(state, 0x20, state->config->volt18setting);	/* FIXME */
-	//tda80xx_writereg(state, 0x00, 0x04);
-	tda80xx_writereg(state, 0x00, 0x0C);
-#endif
-	//tda80xx_writereg(state, 0x00, 0x08); /* Reset AFC1 loop filter */
-
-	tda80xx_write(state, 0x00, tda8044_inittab_post, sizeof(tda8044_inittab_post));
-
-	if (state->config->pll_init) {
-		tda80xx_writereg(state, 0x1c, 0x80);
-		state->config->pll_init(fe);
-		tda80xx_writereg(state, 0x1c, 0x00);
-	}
-
-	return 0;
-}
-
-static int tda8083_init(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	tda80xx_write(state, 0x00, tda8083_inittab, sizeof(tda8083_inittab));
-
-	if (state->config->pll_init) {
-		tda80xx_writereg(state, 0x1c, 0x80);
-		state->config->pll_init(fe);
-		tda80xx_writereg(state, 0x1c, 0x00);
-	}
-
-	return 0;
-}
-
-static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		return tda80xx_writereg(state, 0x20, state->config->volt13setting);
-	case SEC_VOLTAGE_18:
-		return tda80xx_writereg(state, 0x20, state->config->volt18setting);
-	case SEC_VOLTAGE_OFF:
-		return tda80xx_writereg(state, 0x20, 0);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch (tone) {
-	case SEC_TONE_OFF:
-		return tda80xx_writereg(state, 0x29, 0x00);
-	case SEC_TONE_ON:
-		return tda80xx_writereg(state, 0x29, 0x80);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (cmd->msg_len > 6)
-		return -EINVAL;
-
-	tda80xx_writereg(state, 0x29, 0x08 | (cmd->msg_len - 3));
-	tda80xx_write(state, 0x23, cmd->msg, cmd->msg_len);
-	tda80xx_writereg(state, 0x29, 0x0c | (cmd->msg_len - 3));
-	tda80xx_wait_diseqc_fifo(state);
-
-	return 0;
-}
-
-static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cmd)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch (cmd) {
-	case SEC_MINI_A:
-		tda80xx_writereg(state, 0x29, 0x14);
-		break;
-	case SEC_MINI_B:
-		tda80xx_writereg(state, 0x29, 0x1c);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	tda80xx_wait_diseqc_fifo(state);
-
-	return 0;
-}
-
-static int tda80xx_sleep(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	tda80xx_writereg(state, 0x00, 0x02);	/* enter standby */
-
-	return 0;
-}
-
-static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	tda80xx_writereg(state, 0x1c, 0x80);
-	state->config->pll_set(fe, p);
-	tda80xx_writereg(state, 0x1c, 0x00);
-
-	tda80xx_set_parameters(state, p->inversion, p->u.qpsk.symbol_rate, p->u.qpsk.fec_inner);
-	tda80xx_set_clk(state);
-	//tda80xx_set_scpc_freq_offset(state);
-	state->afc_loop = 1;
-
-	return 0;
-}
-
-static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (!state->config->irq)
-		tda80xx_read_status_int(state);
-
-	p->inversion = state->spectral_inversion;
-	p->u.qpsk.fec_inner = state->code_rate;
-
-	return 0;
-}
-
-static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (!state->config->irq)
-		tda80xx_read_status_int(state);
-	*status = state->status;
-
-	return 0;
-}
-
-static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-	int ret;
-	u8 buf[3];
-
-	if ((ret = tda80xx_read(state, 0x0b, buf, sizeof(buf))))
-		return ret;
-
-	*ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2];
-
-	return 0;
-}
-
-static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	u8 gain = ~tda80xx_readreg(state, 0x01);
-	*strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	u8 quality = tda80xx_readreg(state, 0x08);
-	*snr = (quality << 8) | quality;
-
-	return 0;
-}
-
-static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	*ucblocks = tda80xx_readreg(state, 0x0f);
-	if (*ucblocks == 0xff)
-		*ucblocks = 0xffffffff;
-
-	return 0;
-}
-
-static int tda80xx_init(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch(state->id) {
-	case ID_TDA8044:
-		return tda8044_init(fe);
-
-	case ID_TDA8083:
-		return tda8083_init(fe);
-	}
-	return 0;
-}
-
-static void tda80xx_release(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (state->config->irq)
-		free_irq(state->config->irq, &state->worklet);
-
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda80xx_ops;
-
-struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct tda80xx_state* state = NULL;
-	int ret;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &tda80xx_ops, sizeof(struct dvb_frontend_ops));
-	state->spectral_inversion = INVERSION_AUTO;
-	state->code_rate = FEC_AUTO;
-	state->status = 0;
-	state->afc_loop = 0;
-
-	/* check if the demod is there */
-	if (tda80xx_writereg(state, 0x89, 0x00) < 0) goto error;
-	state->id = tda80xx_readreg(state, 0x00);
-
-	switch (state->id) {
-	case ID_TDA8044:
-		state->clk = 96000000;
-		printk("tda80xx: Detected tda8044\n");
-		break;
-
-	case ID_TDA8083:
-		state->clk = 64000000;
-		printk("tda80xx: Detected tda8083\n");
-		break;
-
-	default:
-		goto error;
-	}
-
-	/* setup IRQ */
-	if (state->config->irq) {
-		INIT_WORK(&state->worklet, tda80xx_worklet, state);
-		if ((ret = request_irq(state->config->irq, tda80xx_irq, SA_ONESHOT, "tda80xx", &state->worklet)) < 0) {
-			printk(KERN_ERR "tda80xx: request_irq failed (%d)\n", ret);
-			goto error;
-		}
-	}
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops tda80xx_ops = {
-
-	.info = {
-		.name = "Philips TDA80xx DVB-S",
-		.type = FE_QPSK,
-		.frequency_min = 500000,
-		.frequency_max = 2700000,
-		.frequency_stepsize = 125,
-		.symbol_rate_min = 4500000,
-		.symbol_rate_max = 45000000,
-		.caps =	FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = tda80xx_release,
-
-	.init = tda80xx_init,
-	.sleep = tda80xx_sleep,
-
-	.set_frontend = tda80xx_set_frontend,
-	.get_frontend = tda80xx_get_frontend,
-
-	.read_status = tda80xx_read_status,
-	.read_ber = tda80xx_read_ber,
-	.read_signal_strength = tda80xx_read_signal_strength,
-	.read_snr = tda80xx_read_snr,
-	.read_ucblocks = tda80xx_read_ucblocks,
-
-	.diseqc_send_master_cmd = tda80xx_send_diseqc_msg,
-	.diseqc_send_burst = tda80xx_send_diseqc_burst,
-	.set_tone = tda80xx_set_tone,
-	.set_voltage = tda80xx_set_voltage,
-};
-
-module_param(debug, int, 0644);
-
-MODULE_DESCRIPTION("Philips TDA8044 / TDA8083 DVB-S Demodulator driver");
-MODULE_AUTHOR("Felix Domke, Andreas Oberritter");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda80xx_attach);
diff --git a/drivers/media/dvb/frontends/tda80xx.h b/drivers/media/dvb/frontends/tda80xx.h
deleted file mode 100644
index cd639a0..0000000
--- a/drivers/media/dvb/frontends/tda80xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef TDA80XX_H
-#define TDA80XX_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda80xx_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* IRQ to use (0=>no IRQ used) */
-	u32 irq;
-
-	/* Register setting to use for 13v */
-	u8 volt13setting;
-
-	/* Register setting to use for 18v */
-	u8 volt18setting;
-
-	/* PLL maintenance */
-	int (*pll_init)(struct dvb_frontend* fe);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
-					   struct i2c_adapter* i2c);
-
-#endif // TDA80XX_H

[PATCH 13/16] Makes Some symbols static.

[mchehab]

From: Mauro Carvalho Chehab <mchehab@infradead.org>

Some symbols at cx88-alsa were global. Making those static.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 drivers/media/video/cx88/cx88-alsa.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index a2e36a1..2acccd6 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -128,7 +128,7 @@ MODULE_PARM_DESC(debug,"enable debug mes
  * BOARD Specific: Sets audio DMA
  */
 
-int _cx88_start_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 {
 	struct cx88_buffer   *buf = chip->buf;
 	struct cx88_core *core=chip->core;
@@ -173,7 +173,7 @@ int _cx88_start_audio_dma(snd_cx88_card_
 /*
  * BOARD Specific: Resets audio DMA
  */
-int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
 {
 	struct cx88_core *core=chip->core;
 	dprintk(1, "Stopping audio DMA\n");
@@ -613,7 +613,7 @@ static snd_kcontrol_new_t snd_cx88_captu
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }

[PATCH 16/16] Disabled debug on by default in tvp5150

[mchehab]

From: Markus Rechberger <mrechberger@gmail.com>

disabled debug on by default in tvp5150

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---

 0 files changed, 0 insertions(+), 0 deletions(-)