* IOAPIC (?) problems on a VIA K8T800 system
@ 2006-04-28 23:09 Nicholas Miell
0 siblings, 0 replies; only message in thread
From: Nicholas Miell @ 2006-04-28 23:09 UTC (permalink / raw)
To: Linux Kernel; +Cc: Ingo Molnar
Randomly, my VIA K8T800-based system will stop receiving all interrupts
(the columns in /proc/interrupts stop incrementing) from either the SATA
controller or all of the UHCI controllers (IRQs 16 or 18, respectively).
AFAICT, booting with noapic makes this go away, but since I can't
reliably reproduce it, I don't know for sure if that in fact works
around the problem.
Removing and then reloading the driver module (or using sysfs to
unbind/bind the devices) makes the problem temporarily go away.
This is with the latest FC5 kernel (kernel-2.6.16-1.2096_FC5) on an SMP
AMD64 system, but it's been doing this occasionally on every kernel I've
used for quite some time now.
--
Nicholas Miell <nmiell@comcast.net>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-04-28 23:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-28 23:09 IOAPIC (?) problems on a VIA K8T800 system Nicholas Miell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox