From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: Stephen.Clark@seclark.us
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: how to set this in the future
Date: Mon, 15 May 2006 18:23:42 +0100 [thread overview]
Message-ID: <1147713822.26686.83.camel@localhost.localdomain> (raw)
In-Reply-To: <4468B3E5.5090209@seclark.us>
On Llu, 2006-05-15 at 13:01 -0400, Stephen Clark wrote:
> I have a hp pavilion laptop n5430 with an ali chipset. I have a hitachi
> drive that will do udma100 - the docs on my laptop say it will do udma4
> but linux by default is setting it to
> udma2.
Sounds like the laptop vendor has used short 40 wire cable instead of 80
wire internally to the laptop. This is valid but requires special
knowledge in the driver of those devices who do it.
> 00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if 8a
Can you give me an lspci -vvxxx of that device (or from the box), and
also the output of "dmidecode". That way I can automate the detection in
the new libata pata_ali driver, and if you cc Bartlomiej he can add it
to the old driver (B.Zolnierkiewicz@elka.pw.edu.pl)
Alan
next prev parent reply other threads:[~2006-05-15 17:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-13 20:37 how to set this in the future Stephen Clark
2006-05-15 14:20 ` Alan Cox
2006-05-15 17:01 ` Stephen Clark
2006-05-15 17:23 ` Alan Cox [this message]
2006-05-15 18:37 ` Stephen Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1147713822.26686.83.camel@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=Stephen.Clark@seclark.us \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox