bcm43xx in 2.6.17-rc6

[Andreas Rittershofer <andreas@rittershofer.de>]

lspci says:

00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b
Wireless LAN Controller (rev 02)


So the bcm43xx-support with kernel 2.6.17-rc6 should work, but it does
only partially - WPA is not running; wpa_supplicant says:

ioctl[SIOCSIWENCODEEXT]: Invalid argument
Driver did not support SIOCSIWENCODEEXT
WPA: Failed to set PTK to the driver.
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: GROUP_HANDSHAKE -> DISCONNECTED
wpa_driver_wext_deauthenticate
ioctl[SIOCSIWMLME]: Operation not supported
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing


What is wrong here?

mfg ar

-- 
E-Learning in der Schule:
http://www.dbg-metzingen.de/Menschen/Lehrer/Q-T/Rittershofer/E-Learning/