From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@osdl.org>
Cc: Andrew Morton <akpm@osdl.org>, Ingo Molnar <mingo@elte.hu>,
Russell King <rmk+lkml@arm.linux.org.uk>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH] genirq: ARM dyntick cleanup
Date: Mon, 03 Jul 2006 02:18:48 +0200 [thread overview]
Message-ID: <1151885928.24611.24.camel@localhost.localdomain> (raw)
Linus: "The hacks in kernel/irq/handle.c are really horrid. REALLY
horrid."
They are indeed. Move the dyntick quirks to ARM where they belong.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Index: linux-2.6.git/include/asm-arm/hw_irq.h
===================================================================
--- linux-2.6.git.orig/include/asm-arm/hw_irq.h 2006-07-03 00:13:24.000000000 +0200
+++ linux-2.6.git/include/asm-arm/hw_irq.h 2006-07-03 00:52:04.000000000 +0200
@@ -6,4 +6,15 @@
#include <asm/mach/irq.h>
+#if defined(CONFIG_NO_IDLE_HZ)
+# include <asm/dyntick.h>
+# define handle_dynamic_tick(action) \
+ if (!(action->flags & SA_TIMER) && system_timer->dyn_tick) { \
+ write_seqlock(&xtime_lock); \
+ if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) \
+ system_timer->dyn_tick->handler(irq, 0, regs); \
+ write_sequnlock(&xtime_lock); \
+ }
+#endif
+
#endif
Index: linux-2.6.git/include/linux/irq.h
===================================================================
--- linux-2.6.git.orig/include/linux/irq.h 2006-07-03 00:13:24.000000000 +0200
+++ linux-2.6.git/include/linux/irq.h 2006-07-03 00:49:01.000000000 +0200
@@ -182,6 +182,10 @@ extern int setup_irq(unsigned int irq, s
#ifdef CONFIG_GENERIC_HARDIRQS
+#ifndef handle_dynamic_tick
+# define handle_dynamic_tick(a) do { } while (0)
+#endif
+
#ifdef CONFIG_SMP
static inline void set_native_irq_info(int irq, cpumask_t mask)
{
Index: linux-2.6.git/kernel/irq/handle.c
===================================================================
--- linux-2.6.git.orig/kernel/irq/handle.c 2006-07-03 00:13:24.000000000 +0200
+++ linux-2.6.git/kernel/irq/handle.c 2006-07-03 00:47:47.000000000 +0200
@@ -16,10 +16,6 @@
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
-#if defined(CONFIG_NO_IDLE_HZ) && defined(CONFIG_ARM)
-#include <asm/dyntick.h>
-#endif
-
#include "internals.h"
/**
@@ -133,14 +129,7 @@ irqreturn_t handle_IRQ_event(unsigned in
irqreturn_t ret, retval = IRQ_NONE;
unsigned int status = 0;
-#if defined(CONFIG_NO_IDLE_HZ) && defined(CONFIG_ARM)
- if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
- write_seqlock(&xtime_lock);
- if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
- system_timer->dyn_tick->handler(irq, 0, regs);
- write_sequnlock(&xtime_lock);
- }
-#endif
+ handle_dynamic_tick(action);
if (!(action->flags & IRQF_DISABLED))
local_irq_enable();
Index: linux-2.6.git/include/asm-arm/mach/time.h
===================================================================
--- linux-2.6.git.orig/include/asm-arm/mach/time.h 2006-06-21 08:32:46.000000000 +0200
+++ linux-2.6.git/include/asm-arm/mach/time.h 2006-07-03 00:54:07.000000000 +0200
@@ -69,6 +69,7 @@ extern void timer_tick(struct pt_regs *)
/*
* Kernel time keeping support.
*/
+struct timespec;
extern int (*set_rtc)(void);
extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
next reply other threads:[~2006-07-03 0:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-03 0:18 Thomas Gleixner [this message]
2006-07-03 0:35 ` [PATCH] genirq: ARM dyntick cleanup Andrew Morton
2006-07-03 6:29 ` Thomas Gleixner
2006-07-03 6:57 ` Ingo Molnar
2006-07-04 11:54 ` Christoph Hellwig
2006-07-04 12:22 ` Ingo Molnar
2006-07-05 8:35 ` Russell King
2006-07-08 18:53 ` Christoph Hellwig
2006-07-03 7:41 ` Russell King
2006-07-03 7:55 ` Andrew Morton
2006-07-03 9:03 ` Russell King
2006-07-03 9:12 ` Andrew Morton
2006-07-03 16:56 ` Linus Torvalds
2006-07-03 17:13 ` Linus Torvalds
2006-07-03 17:27 ` Arjan van de Ven
2006-07-05 23:24 ` Randy.Dunlap
2006-07-05 23:35 ` Andrew Morton
2006-07-05 23:50 ` Randy.Dunlap
2006-07-05 23:53 ` Linus Torvalds
2006-07-06 0:02 ` Randy.Dunlap
2006-07-06 6:47 ` Giacomo A. Catenazzi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1151885928.24611.24.camel@localhost.localdomain \
--to=tglx@linutronix.de \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rmk+lkml@arm.linux.org.uk \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox