Re: 2.6.18-rc5 + pata-drivers on MSI K9N Ultra report, AMD64

Krzysztof Halasa
2006-09-02T22:45:24Z

Alan Cox <alan@lxorguk.ukuu.org.uk> writes:

>> scsi3 : pata_amd
>> ata4: port is slow to respond, please be patient
>> ata4: port failed to respond (30 secs)
>
> Please send me an lspci -vxxx. This might be BIOS or might be us
> misparsing disable/enable bits.

(removed CC: netdev)

Hmmm... is it that 0x62, isn't it?

static struct pci_bits amd_enable_bits[] = {
{ 0x40, 1, 0x02, 0x02 },
{ 0x40, 1, 0x01, 0x01 }
};

if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);

Perhaps this code isn't called at all? It looks I can debug it if you
want so (i.e., if there is no obvious visible bug here).

00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a [Master
SecP PriP])
Subsystem: Unknown device f462:7250
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 62 f4 50 72
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 62 f4 50 72 01 00 02 00 00 00 00 00 00 00 00 00
^^
50: 02 f0 04 00 00 00 00 00 a8 a8 a8 20 3f 00 ff 20
60: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 60 a0 bb 3e 00 00 02 10 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
--
Krzysztof Halasa

--
VGER BF report: U 0.500121