* [PATCH] radeonfb supend/resume support for Acer Aspire 2010
@ 2006-09-22 20:10 Carl-Daniel Hailfinger
2006-09-23 6:13 ` Benjamin Herrenschmidt
0 siblings, 1 reply; 2+ messages in thread
From: Carl-Daniel Hailfinger @ 2006-09-22 20:10 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Linux Kernel Mailing List, Suspend-devel list,
Benjamin A. Okopnik
Hi Ben,
the patch below has been tested by Benjamin Okopnik and makes
suspend-to-RAM work for him perfectly on his Acer Aspire 2010.
Without this patch, a total lockup happens on resume.
I hope the patch is still in the merge window for 2.6.19.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
This patch adds suspend/resume support for the graphics chip in the
Acer Aspire 2010: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
01:00.0 0300: 1002:4e50 (prog-if 00 [VGA])
Subsystem: 1025:0061
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 16
Memory at a8000000 (32-bit, prefetchable) [size=128M]
I/O ports at c100 [size=256]
Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@mgx.net>
--- a/drivers/video/aty/radeon_pm.c 2006-09-22 02:53:06.000000000 +0200
+++ b/drivers/video/aty/radeon_pm.c 2006-09-22 02:55:15.000000000 +0200
@@ -86,6 +86,9 @@
BUGFIX("Samsung P35",
PCI_VENDOR_ID_SAMSUNG, 0xc00c,
radeon_pm_off, radeon_reinitialize_M10),
+ BUGFIX("Acer Aspire 2010",
+ PCI_VENDOR_ID_AI, 0x0061,
+ radeon_pm_off, radeon_reinitialize_M10),
{ .ident = NULL }
};
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-09-23 6:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-22 20:10 [PATCH] radeonfb supend/resume support for Acer Aspire 2010 Carl-Daniel Hailfinger
2006-09-23 6:13 ` Benjamin Herrenschmidt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox