From: Matthias Hentges <oe@hentges.net>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: Stephen Hemminger <shemminger@osdl.org>
Subject: Re: sky2 (was Re: 2.6.18-mm2)
Date: Sun, 08 Oct 2006 20:31:36 +0200 [thread overview]
Message-ID: <1160332296.4575.31.camel@mhcln03> (raw)
In-Reply-To: <1160326801.4575.27.camel@mhcln03>
[-- Attachment #1.1: Type: text/plain, Size: 155 bytes --]
Oops, I forgot the "x" in lspci -vvvx, new dumps are attached.
--
Matthias 'CoreDump' Hentges
My OS: Debian SID. Geek by Nature, Linux by Choice
[-- Attachment #1.2: lspci-vvvvx_sky2-1.txt --]
[-- Type: text/plain, Size: 1745 bytes --]
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 216
Region 0: Memory at fa8fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a800 [size=256]
Expansion ROM at fa8c0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0200c Data: 4152
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
00: ab 11 62 43 07 04 10 00 20 00 00 02 04 00 00 00
10: 04 c0 8f fa 00 00 00 00 01 a8 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 81
30: 00 00 8c fa 48 00 00 00 00 00 00 00 0b 01 00 00
[-- Attachment #1.3: lspci-vvvvx_sky2-2.txt --]
[-- Type: text/plain, Size: 1745 bytes --]
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fa9fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b800 [size=256]
Expansion ROM at fa9c0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 414a
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
00: ab 11 62 43 07 04 10 00 20 00 00 02 04 00 00 00
10: 04 c0 9f fa 00 00 00 00 01 b8 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 81
30: 00 00 9c fa 48 00 00 00 00 00 00 00 05 01 00 00
[-- Attachment #2: Dies ist ein digital signierter Nachrichtenteil --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2006-10-08 18:31 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060928155053.7d8567ae.akpm@osdl.org>
2006-09-28 23:07 ` sky2 (was Re: 2.6.18-mm2) Jeff Garzik
2006-09-28 23:19 ` Stephen Hemminger
2006-09-30 0:26 ` Matthias Hentges
2006-10-04 2:57 ` Matthias Hentges
2006-10-04 3:26 ` Stephen Hemminger
2006-10-07 19:48 ` Matthias Hentges
2006-10-08 13:41 ` Matthias Hentges
2006-10-08 16:20 ` Stephen Hemminger
2006-10-08 17:00 ` Matthias Hentges
2006-10-08 18:31 ` Matthias Hentges [this message]
2006-10-09 16:45 ` Stephen Hemminger
2006-10-09 23:14 ` Oleg Verych
2006-10-15 4:27 ` Oleg Verych
2006-10-10 10:45 ` Matthias Hentges
2006-10-10 0:02 ` Beber
2006-09-28 23:25 ` Andrew Morton
2006-09-28 23:30 ` Stephen Hemminger
2006-09-29 16:04 ` Andrea Gelmini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1160332296.4575.31.camel@mhcln03 \
--to=oe@hentges.net \
--cc=linux-kernel@vger.kernel.org \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox