From: Will Schmidt <will_schmidt@vnet.ibm.com>
To: Christoph Lameter <clameter@sgi.com>
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: kernel BUG in __cache_alloc_node at linux-2.6.git/mm/slab.c:3177!
Date: Fri, 13 Oct 2006 14:53:46 -0500 [thread overview]
Message-ID: <1160769226.11239.22.camel@farscape> (raw)
In-Reply-To: <Pine.LNX.4.64.0610131158270.26311@schroedinger.engr.sgi.com>
On Fri, 2006-13-10 at 12:05 -0700, Christoph Lameter wrote:
> On Fri, 13 Oct 2006, Will Schmidt wrote:
>
> > Am seeing a crash on a power5 LPAR when booting the linux-2.6 git
> > tree. It's fairly early during boot, so I've included the whole log
> > below. This partition has 8 procs, (shared, including threads), and
> > 512M RAM.
>
> This looks like slab bootstrap. You are bootstrapping while having
> zonelists build with zones that are only going to be populated later?
> This will lead to incorrect NUMA placement of lots of slab structures on
> bootup.
I dont think so.. but it's not an area I'm very familiar with. one
of the other PPC folks might chime in with something here.
>
> Check if the patch below may cure the oops. Your memory is likely
> still placed on the wrong numa nodes since we have to fallback from
> the intended node.
Nope, no change with this patch.
>
> Index: linux-2.6/mm/slab.c
> ===================================================================
> --- linux-2.6.orig/mm/slab.c 2006-10-13 11:59:55.000000000 -0700
> +++ linux-2.6/mm/slab.c 2006-10-13 12:03:15.000000000 -0700
> @@ -3154,7 +3154,8 @@ void *fallback_alloc(struct kmem_cache *
>
> for (z = zonelist->zones; *z && !obj; z++)
> if (zone_idx(*z) <= ZONE_NORMAL &&
> - cpuset_zone_allowed(*z, flags))
> + cpuset_zone_allowed(*z, flags) &&
> + (*z)->free_pages)
> obj = __cache_alloc_node(cache,
> flags | __GFP_THISNODE,
> zone_to_nid(*z));
next prev parent reply other threads:[~2006-10-13 19:53 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-13 18:41 kernel BUG in __cache_alloc_node at linux-2.6.git/mm/slab.c:3177! Will Schmidt
2006-10-13 19:05 ` Christoph Lameter
2006-10-13 19:53 ` Will Schmidt [this message]
2006-10-13 20:57 ` Will Schmidt
2006-10-13 21:22 ` Nathan Lynch
2006-10-13 21:34 ` Anton Blanchard
2006-10-13 22:01 ` Mike Kravetz
2006-10-13 22:22 ` Christoph Lameter
2006-10-16 16:00 ` Will Schmidt
2006-10-16 19:20 ` Will Schmidt
2006-10-16 19:25 ` Christoph Lameter
2006-10-16 20:50 ` Will Schmidt
2006-10-16 23:37 ` Christoph Lameter
2006-10-18 6:11 ` Paul Mackerras
2006-10-18 15:12 ` Christoph Lameter
2006-10-18 21:19 ` Paul Mackerras
2006-10-18 21:26 ` Christoph Lameter
2006-10-18 21:49 ` Christoph Lameter
2006-10-19 5:03 ` Paul Mackerras
2006-10-19 16:16 ` Christoph Lameter
2006-10-19 16:30 ` Anton Blanchard
2006-10-19 16:49 ` Christoph Lameter
2006-10-19 22:23 ` Paul Mackerras
2006-10-19 22:31 ` Christoph Lameter
2006-10-20 7:18 ` Paul Mackerras
2006-10-20 14:18 ` Andy Whitcroft
2006-10-20 14:31 ` [PATCH] Reintroduce NODES_SPAN_OTHER_NODES for powerpc Andy Whitcroft
2006-10-20 16:30 ` Mel Gorman
2006-10-20 14:59 ` kernel BUG in __cache_alloc_node at linux-2.6.git/mm/slab.c:3177! Mike Kravetz
2006-10-20 15:19 ` Will Schmidt
2006-10-20 16:00 ` Andy Whitcroft
2006-10-20 17:09 ` Andrew Morton
2006-10-20 17:46 ` Christoph Lameter
2006-10-20 18:07 ` Andy Whitcroft
2006-10-20 17:13 ` Will Schmidt
2006-10-20 17:34 ` Christoph Lameter
2006-10-20 22:54 ` Paul Mackerras
2006-10-19 17:03 ` Christoph Lameter
2006-10-19 18:07 ` Christoph Lameter
2006-10-19 20:37 ` Will Schmidt
2006-10-19 21:28 ` Christoph Lameter
2006-10-19 21:43 ` Will Schmidt
2006-10-19 22:00 ` Christoph Lameter
2006-10-19 21:39 ` Christoph Lameter
2006-10-19 20:38 ` Will Schmidt
2006-10-19 21:30 ` Christoph Lameter
2006-10-18 16:06 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1160769226.11239.22.camel@farscape \
--to=will_schmidt@vnet.ibm.com \
--cc=clameter@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox