From: Will Schmidt <will_schmidt@vnet.ibm.com>
To: Christoph Lameter <clameter@sgi.com>
Cc: Anton Blanchard <anton@samba.org>,
akpm@osdl.org, linuxppc-dev@ozlabs.org,
Paul Mackerras <paulus@samba.org>,
linux-kernel@vger.kernel.org
Subject: Re: kernel BUG in __cache_alloc_node at linux-2.6.git/mm/slab.c:3177!
Date: Thu, 19 Oct 2006 16:43:16 -0500 [thread overview]
Message-ID: <1161294197.8946.56.camel@farscape> (raw)
In-Reply-To: <Pine.LNX.4.64.0610191427270.10316@schroedinger.engr.sgi.com>
On Thu, 2006-19-10 at 14:28 -0700, Christoph Lameter wrote:
> On Thu, 19 Oct 2006, Will Schmidt wrote:
>
> > This didnt fix the problem on my box. I tried this both against mm and
> > linux-2.6.git
>
> Same failure condition? Would you also apply the printk patch and send
> me the output?
Yup, here it is:
-----------------------------------------------------
ppc64_pft_size = 0x18
physicalMemorySize = 0x22000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x1ffff
-----------------------------------------------------
Linux version 2.6.19-rc2-mm1 (willschm@airbag2) (gcc version 4.1.0 (SUSE
Linux)) #2 SMP Thu Oct 19 16:37:26 CDT 2006
[boot]0012 Setup Arch
NUMA associativity depth for CPU/Memory: 3
adding cpu 0 to node 0
node 0
NODE_DATA() = c000000015ffed80
start_paddr = 8000000
end_paddr = 16000000
bootmap_paddr = 15ffc000
reserve_bootmem ffc0000 40000
reserve_bootmem 15ffc000 2000
reserve_bootmem 15ffed80 1280
node 1
NODE_DATA() = c000000021ff7b80
start_paddr = 0
end_paddr = 22000000
bootmap_paddr = 21ff2000
reserve_bootmem 0 851000
reserve_bootmem 2655000 9000
reserve_bootmem 77b2000 84e000
reserve_bootmem 21ff2000 5000
reserve_bootmem 21ff7b80 1280
reserve_bootmem 21ff8e58 71a4
No ramdisk, default root is /dev/sda2
EEH: No capable adapters found
PPC64 nvram contains 7168 bytes
Zone PFN ranges:
DMA 0 -> 139264
Normal 139264 -> 139264
early_node_map[3] active PFN ranges
1: 0 -> 32768
0: 32768 -> 90112
1: 90112 -> 139264
[boot]0015 Setup Done
Built 2 zonelists. Total pages: 136576
Kernel command line: root=/dev/sda3 xmon=on numa=debug
[boot]0020 XICS Init
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
freeing bootmem node 0
freeing bootmem node 1
Memory: 530216k/557056k available (5544k kernel code, 30508k reserved,
2232k data, 548k bss, 248k init)
Get cache descritor
__cache_alloc
__cache_alloc_node 0
fallback_alloc
__cache_alloc_node 0
__cache_alloc_node 1
kernel BUG in __cache_alloc_node
at /development/kernels/2.6-mm/mm/slab.c:3193!
cpu 0x0: Vector: 700 (Program Check) at [c00000000079b8d0]
pc: c0000000000b70f8: .__cache_alloc_node+0x5c/0x208
lr: c0000000000b70e0: .__cache_alloc_node+0x44/0x208
sp: c00000000079bb50
msr: 8000000000021032
current = 0xc00000000058ca90
paca = 0xc00000000058d380
pid = 0, comm = swapper
kernel BUG in __cache_alloc_node
at /development/kernels/2.6-mm/mm/slab.c:3193!
enter ? for help
[c00000000079bc00] c0000000000b735c .fallback_alloc+0xb8/0xfc
[c00000000079bca0] c0000000000b7930 .kmem_cache_zalloc+0xd4/0x128
[c00000000079bd40] c0000000000b9af4 .kmem_cache_create+0x1f4/0x604
[c00000000079be30] c000000000546d98 .kmem_cache_init+0x1d8/0x4b0
[c00000000079bef0] c00000000052c748 .start_kernel+0x244/0x328
[c00000000079bf90] c0000000000084f8 .start_here_common+0x54/0x5c
0:mon>
next prev parent reply other threads:[~2006-10-19 21:43 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-13 18:41 kernel BUG in __cache_alloc_node at linux-2.6.git/mm/slab.c:3177! Will Schmidt
2006-10-13 19:05 ` Christoph Lameter
2006-10-13 19:53 ` Will Schmidt
2006-10-13 20:57 ` Will Schmidt
2006-10-13 21:22 ` Nathan Lynch
2006-10-13 21:34 ` Anton Blanchard
2006-10-13 22:01 ` Mike Kravetz
2006-10-13 22:22 ` Christoph Lameter
2006-10-16 16:00 ` Will Schmidt
2006-10-16 19:20 ` Will Schmidt
2006-10-16 19:25 ` Christoph Lameter
2006-10-16 20:50 ` Will Schmidt
2006-10-16 23:37 ` Christoph Lameter
2006-10-18 6:11 ` Paul Mackerras
2006-10-18 15:12 ` Christoph Lameter
2006-10-18 21:19 ` Paul Mackerras
2006-10-18 21:26 ` Christoph Lameter
2006-10-18 21:49 ` Christoph Lameter
2006-10-19 5:03 ` Paul Mackerras
2006-10-19 16:16 ` Christoph Lameter
2006-10-19 16:30 ` Anton Blanchard
2006-10-19 16:49 ` Christoph Lameter
2006-10-19 22:23 ` Paul Mackerras
2006-10-19 22:31 ` Christoph Lameter
2006-10-20 7:18 ` Paul Mackerras
2006-10-20 14:18 ` Andy Whitcroft
2006-10-20 14:31 ` [PATCH] Reintroduce NODES_SPAN_OTHER_NODES for powerpc Andy Whitcroft
2006-10-20 16:30 ` Mel Gorman
2006-10-20 14:59 ` kernel BUG in __cache_alloc_node at linux-2.6.git/mm/slab.c:3177! Mike Kravetz
2006-10-20 15:19 ` Will Schmidt
2006-10-20 16:00 ` Andy Whitcroft
2006-10-20 17:09 ` Andrew Morton
2006-10-20 17:46 ` Christoph Lameter
2006-10-20 18:07 ` Andy Whitcroft
2006-10-20 17:13 ` Will Schmidt
2006-10-20 17:34 ` Christoph Lameter
2006-10-20 22:54 ` Paul Mackerras
2006-10-19 17:03 ` Christoph Lameter
2006-10-19 18:07 ` Christoph Lameter
2006-10-19 20:37 ` Will Schmidt
2006-10-19 21:28 ` Christoph Lameter
2006-10-19 21:43 ` Will Schmidt [this message]
2006-10-19 22:00 ` Christoph Lameter
2006-10-19 21:39 ` Christoph Lameter
2006-10-19 20:38 ` Will Schmidt
2006-10-19 21:30 ` Christoph Lameter
2006-10-18 16:06 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1161294197.8946.56.camel@farscape \
--to=will_schmidt@vnet.ibm.com \
--cc=akpm@osdl.org \
--cc=anton@samba.org \
--cc=clameter@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox