public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Marcel Holtmann <marcel@holtmann.org>
To: Erik Mouw <erik@harddisk-recovery.com>
Cc: "Kristian Høgsberg" <krh@redhat.com>,
	linux-kernel@vger.kernel.org,
	"Stefan Richter" <stefanr@s5r6.in-berlin.de>
Subject: Re: [PATCH 0/3] New firewire stack
Date: Tue, 05 Dec 2006 17:53:55 +0100	[thread overview]
Message-ID: <1165337635.2756.31.camel@localhost> (raw)
In-Reply-To: <20061205160530.GB6043@harddisk-recovery.com>

Hi Erik,

> > >can you please use drivers/firewire/ if you want to start clean or
> > >aiming at replacing drivers/ieee1394/. Using "fw" as an abbreviation in
> > >the directory path is not really helpful.
> > 
> > Yes, that's probably a better idea.  Do you see a problem with using fw_* 
> > as a prefix in the code though?  I don't see anybody using that prefix, but 
> > Stefan pointed out to me that it's often used to abbreviate firmware too.
> 
> So what about fiwi_*? If that's too close to wifi_*, try frwr_.

please don't. These kind of abbreviations make my brain tilt. For the
directory name you basically should use the full name. In this case it
will be drivers/ieee1394/ or drivers/firewire/. Nothing else is really
acceptable and if you look at other subsystems, you will see that they
always use the long name.

For the exported public functions you might wanna use abbreviations, but
in general I don't recommend it. And normally we only talk about a
limited functions that are needed to be exposed via EXPORT_SYMBOL.

Regards

Marcel



  parent reply	other threads:[~2006-12-05 16:53 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-12-05  5:22 [PATCH 0/3] New firewire stack Kristian Høgsberg
2006-12-05  5:22 ` [PATCH 2/3] Import fw-ohci driver Kristian Høgsberg
2006-12-05  5:54   ` Pete Zaitcev
2006-12-05  5:58   ` Jeff Garzik
2006-12-05  6:09     ` Benjamin Herrenschmidt
2006-12-09  2:08     ` Kristian Høgsberg
2006-12-09  7:31       ` Stefan Richter
2006-12-10 21:47         ` Kristian Høgsberg
2006-12-10 22:59           ` Stefan Richter
2006-12-10 23:00             ` alignment and packing of struct types (was Re: [PATCH 2/3] Import fw-ohci driver.) Stefan Richter
2006-12-05  5:22 ` [PATCH 3/3] Import fw-sbp2 driver Kristian Høgsberg
2006-12-05  6:07   ` Jeff Garzik
2006-12-05 18:18     ` Stefan Richter
2006-12-14 20:48     ` Kristian Høgsberg
2006-12-14 21:40       ` Stefan Richter
2006-12-15 15:08         ` Kristian Høgsberg
2006-12-15 18:27           ` Stefan Richter
2006-12-05  5:42 ` [PATCH 0/3] New firewire stack Benjamin Herrenschmidt
2006-12-05  6:20   ` Kristian Høgsberg
2006-12-05 16:28     ` Ray Lee
2006-12-05 23:24       ` Kristian Høgsberg
2006-12-05  7:05   ` David Miller
2006-12-05 16:42     ` Kristian Høgsberg
2006-12-05 18:49       ` Stefan Richter
2006-12-05 21:41         ` Benjamin Herrenschmidt
2006-12-05 23:15           ` Stefan Richter
2006-12-05  8:46 ` Marcel Holtmann
2006-12-05 15:13   ` Kristian Høgsberg
2006-12-05 15:30     ` Marcel Holtmann
2006-12-06 16:21       ` Geert Uytterhoeven
2006-12-06 16:32         ` Stefan Richter
2006-12-05 16:05     ` Erik Mouw
2006-07-12 14:56       ` Pavel Machek
2006-12-08 15:09         ` Stefan Richter
2006-12-09 19:44           ` Kristian Høgsberg
2006-12-10 12:57             ` Stefan Richter
2006-12-10 22:17               ` Kristian Høgsberg
2006-12-10 23:21                 ` Stefan Richter
2006-12-09 21:51           ` Benjamin Herrenschmidt
2006-12-09 22:51             ` Stefan Richter
2006-12-05 16:53       ` Marcel Holtmann [this message]
2006-12-05 23:27         ` Kristian Høgsberg
2006-12-05 18:49 ` Alexey Dobriyan
2006-12-05 19:53   ` Stefan Richter
2006-12-05 23:21   ` Kristian Høgsberg
2006-12-06  5:35     ` Ben Collins
2006-12-06  8:56       ` Stefan Richter
2006-12-06 11:40         ` Alexander Neundorf
2006-12-06 12:38           ` Stefan Richter
2006-12-06 21:21             ` Kristian Høgsberg
2006-12-06 14:49         ` Ben Collins
2006-12-07  0:31           ` Kristian Høgsberg
2006-12-06  8:36     ` Stefan Richter
2006-12-06 22:27       ` Kristian Høgsberg
2006-12-06 23:55         ` Stefan Richter
2006-12-05 23:23 ` Olaf Hering

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1165337635.2756.31.camel@localhost \
    --to=marcel@holtmann.org \
    --cc=erik@harddisk-recovery.com \
    --cc=krh@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefanr@s5r6.in-berlin.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox