From: Stian Jordet <liste@jordet.net>
To: linux-kernel@vger.kernel.org
Subject: Teles PCI not initializing with HiSax
Date: Mon, 11 Dec 2006 23:32:26 +0100 [thread overview]
Message-ID: <1165876346.3988.4.camel@localhost.localdomain> (raw)
Hi,
since at least 2.6.18, my ISDN card has given me this error in dmesg:
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2
PPP BSD Compression module registered
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (kernel)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Teles/PCI driver Rev. 2.23.2.3
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 19
Found: Zoran, base-address: 0xdb800000, irq: 0x13
HiSax: Teles PCI config irq:19 mem:e084e000
TelesPCI: ISAC version (0): 2086/2186 V1.1
TelesPCI: HSCX version A: V2.1 B: V2.1
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ(19) getting no interrupts during init 1
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ(19) getting no interrupts during init 2
Teles PCI: IRQ 19 count 0
Teles PCI: IRQ(19) getting no interrupts during init 3
HiSax: Card Teles PCI not installed !
I also get this error when I boot with "acpi=off noapic", so I'm pretty
sure it's a hisax bug, not an acpi/irq error.
Anyone have an idea what's the problem here?
Please cc me, as I'm not subscribed.
Thanks.
Best regards,
Stian
reply other threads:[~2006-12-11 22:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1165876346.3988.4.camel@localhost.localdomain \
--to=liste@jordet.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox