linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Justin Rosander <myrddinemrys@neo.rr.com>
To: Eric Moore <eric.moore@lsil.com>
Cc: Andrew Morton <akpm@osdl.org>,
	linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: Re: PROBLEM: LSIFC909 mpt card fails to recognize devices
Date: Mon, 08 Jan 2007 19:53:47 -0500	[thread overview]
Message-ID: <1168304027.5403.0.camel@localhost> (raw)
In-Reply-To: <20070105035526.GA14185@lsil.com>

Success! Here you are:
00:00.0 0600: 1106:3189 (rev 80)
        Subsystem: 1458:5000
        Flags: bus master, 66MHz, medium devsel, latency 8
        Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [80] AGP version 3.5
        Capabilities: [c0] Power Management version 2

00:01.0 0604: 1106:b198
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: e0000000-e1ffffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        Capabilities: [80] Power Management version 2

00:0a.0 0401: 1102:0004 (rev 04)
        Subsystem: 1102:1003
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at c000 [size=64]
        Capabilities: [dc] Power Management version 2

00:0a.2 0c00: 1102:4001 (rev 04) (prog-if 10)
        Subsystem: 1102:0010
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e3035000 (32-bit, non-prefetchable) [size=2K]
        Memory at e3030000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

00:0b.0 0480: 1131:7133 (rev 10)
        Subsystem: 1043:4843
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e3034000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2

00:0c.0 0100: 1000:0621 (rev 01)
        Subsystem: 10cd:1000
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
        I/O ports at c400 [size=256]
        Memory at e3000000 (64-bit, non-prefetchable) [size=128K]
        Memory at e3020000 (64-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at 30000000 [disabled] [size=1M]
        Capabilities: [40] Power Management version 2

00:0f.0 0101: 1106:0571 (rev 06) (prog-if 8a)
        Subsystem: 1458:5002
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c800 [size=16]
        Capabilities: [c0] Power Management version 2

00:10.0 0c03: 1106:3038 (rev 81)
        Subsystem: 1458:5004
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at cc00 [size=32]
        Capabilities: [80] Power Management version 2

00:10.1 0c03: 1106:3038 (rev 81)
        Subsystem: 1458:5004
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at d000 [size=32]
        Capabilities: [80] Power Management version 2

00:10.2 0c03: 1106:3038 (rev 81)
        Subsystem: 1458:5004
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at d400 [size=32]
        Capabilities: [80] Power Management version 2

00:10.3 0c03: 1106:3038 (rev 81)
        Subsystem: 1458:5004
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at d800 [size=32]
        Capabilities: [80] Power Management version 2

00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20)
        Subsystem: 1458:5004
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at e3036000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

00:11.0 0601: 1106:3227
        Subsystem: 1458:5001
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: [c0] Power Management version 2

00:11.5 0401: 1106:3059 (rev 60)
        Subsystem: 1458:a002
        Flags: medium devsel, IRQ 10
        I/O ports at dc00 [size=256]
        Capabilities: [c0] Power Management version 2

00:12.0 0200: 1106:3065 (rev 78)
        Subsystem: 1458:e000
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at e000 [size=256]
        Memory at e3037000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2

01:00.0 0300: 10de:0172 (rev a3)
        Subsystem: 1545:0035
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
        Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d8000000 (32-bit, prefetchable) [size=64M]
        Memory at dc000000 (32-bit, prefetchable) [size=512K]
        [virtual] Expansion ROM at dc080000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 2.0


On Thu, 2007-01-04 at 20:55 -0700, Eric Moore wrote:
> On Thu, Jan 04, 2007 at 04:59:22PM -0800, Andrew Morton wrote:
> > On Thu, 04 Jan 2007 19:06:46 -0500
> > Justin Rosander <myrddinemrys@neo.rr.com> wrote:
> > 
> > > Please forward this to the appropriate maintainer.  Thank you.
> > > 
> > > [1.] One line summary of the problem:    My fibre channel drives fail to
> > > be recognized by my LSIFC909 card. 
> > 
> > Please send the output of `lspci -vn'
> > -
> 
> Recompile the driver with MPT_DEBUG_INIT enabled in the driver Makefile,
> and repost the output.
> 
> Eric Moore


  parent reply	other threads:[~2007-01-09  0:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-01-05  0:06 PROBLEM: LSIFC909 mpt card fails to recognize devices Justin Rosander
2007-01-05  0:59 ` Andrew Morton
2007-01-05  3:55   ` Eric Moore
2007-01-07 18:07     ` Justin Rosander
2007-01-09  0:53     ` Justin Rosander [this message]
  -- strict thread matches above, loose matches on Subject: below --
2007-01-08 16:21 Moore, Eric
2007-01-09  1:16 Moore, Eric
2007-01-10 13:46 ` Justin Rosander

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1168304027.5403.0.camel@localhost \
    --to=myrddinemrys@neo.rr.com \
    --cc=akpm@osdl.org \
    --cc=eric.moore@lsil.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).