* [BUG] ethX misnumbered and one missing in mii-tool @ 2007-03-29 21:23 Andrei Popa 2007-03-30 4:21 ` Jesse Brandeburg 0 siblings, 1 reply; 6+ messages in thread From: Andrei Popa @ 2007-03-29 21:23 UTC (permalink / raw) To: Linux Kernel Mailing List Hello, In a dual core 2 server with an intel motherboard and 5 network cards(two onboard) and 1 pci express card with two slots and one pci-x pci64 card the kernel sees all of them in dmesg but in mii-tool are misnumbered and one card is missing. (please CC as I am not subscribed to lkml) from dmesg: Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:21:0c:08 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.1 to 64 e1000: 0000:03:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:21:0c:09 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:17:b7:68 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:05:00.1 to 64 e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:17:b7:69 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 27 (level, low) -> IRQ 21 e1000: 0000:06:02.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:ba:a8:50 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection zeus ~ # mii-tool eth2: no link eth5: negotiated 100baseTx-FD, link ok eth6: no link eth7: no link zeus ~ # it sees only 4 cards that are misnumbered and one is missing. zeus ~ # lspci 00:00.0 Host bridge: Intel Corporation Server Memory Contoller Hub (rev b1) 00:02.0 PCI bridge: Intel Corporation Server PCI Express x8 Port 2-3 (rev b1) 00:03.0 PCI bridge: Intel Corporation Server PCI Express x4 Port 3 (rev b1) 00:08.0 System peripheral: Intel Corporation Server DMA Engine (rev b1) 00:10.0 Host bridge: Intel Corporation Server Error Reporting Registers (rev b1) 00:10.1 Host bridge: Intel Corporation Server Error Reporting Registers (rev b1) 00:10.2 Host bridge: Intel Corporation Server Error Reporting Registers (rev b1) 00:11.0 Host bridge: Intel Corporation Reserved Registers (rev b1) 00:13.0 Host bridge: Intel Corporation Reserved Registers (rev b1) 00:15.0 Host bridge: Intel Corporation Server FBD Registers (rev b1) 00:16.0 Host bridge: Intel Corporation Server FBD Registers (rev b1) 00:1c.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Root Port 1 (rev 09) 00:1d.0 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #1 (rev 09) 00:1d.1 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #2 (rev 09) 00:1d.2 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #3 (rev 09) 00:1d.3 USB Controller: Intel Corporation Enterprise Southbridge UHCI USB #4 (rev 09) 00:1d.7 USB Controller: Intel Corporation Enterprise Southbridge EHCI USB (rev 09) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) 00:1f.0 ISA bridge: Intel Corporation Enterprise Southbridge LPC (rev 09) 00:1f.1 IDE interface: Intel Corporation Enterprise Southbridge PATA (rev 09) 00:1f.2 SATA controller: Intel Corporation Enterprise Southbridge SATA AHCI (rev 09) 00:1f.3 SMBus: Intel Corporation Enterprise Southbridge SMBus (rev 09) 01:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Upstream Port (rev 01) 01:00.3 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express to PCI-X Bridge (rev 01) 02:00.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Downstream Port E1 (rev 01) 02:01.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Downstream Port E2 (rev 01) 02:02.0 PCI bridge: Intel Corporation Enterprise Southbridge PCI Express Downstream Port E3 (rev 01) 03:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 03:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 05:00.0 Ethernet controller: Intel Corporation PRO/1000 EB Network Connection with I/O Acceleration (rev 01) 05:00.1 Ethernet controller: Intel Corporation PRO/1000 EB Network Connection with I/O Acceleration (rev 01) 06:02.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04) 09:0c.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) # # Automatically generated make config: don't edit # Linux kernel version: 2.6.20.4-zeus3 # Fri Mar 30 23:07:23 2007 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set # CONFIG_CPUSETS is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # # CONFIG_MODULES is not set # # Block layer # CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_X86_HT=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_NR_CPUS=8 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 CONFIG_REORDER=y CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y # CONFIG_PCI_MSI is not set CONFIG_HT_IRQ=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_ASK_IP_FIB_HASH is not set CONFIG_IP_FIB_TRIE=y # CONFIG_IP_FIB_HASH is not set CONFIG_IP_MULTIPLE_TABLES=y # CONFIG_IP_ROUTE_MULTIPATH is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=y CONFIG_TCP_CONG_HTCP=y CONFIG_TCP_CONG_HSTCP=y CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y CONFIG_TCP_CONG_SCALABLE=y # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set # CONFIG_DEFAULT_VEGAS is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK_ENABLED is not set CONFIG_NETFILTER_XTABLES=y # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set CONFIG_NETFILTER_XT_TARGET_DSCP=y # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set CONFIG_NETFILTER_XT_MATCH_DSCP=y # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=y # CONFIG_NETFILTER_XT_MATCH_MARK is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_IPRANGE=y CONFIG_IP_NF_MATCH_TOS=y # CONFIG_IP_NF_MATCH_RECENT is not set CONFIG_IP_NF_MATCH_ECN=y # CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_TTL=y # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_MATCH_ADDRTYPE=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_TTL=y CONFIG_IP_NF_RAW=y # CONFIG_IP_NF_ARPTABLES is not set CONFIG_IP_NF_SET=y CONFIG_IP_NF_SET_MAX=256 CONFIG_IP_NF_SET_HASHSIZE=1024 CONFIG_IP_NF_SET_IPMAP=y CONFIG_IP_NF_SET_MACIPMAP=y CONFIG_IP_NF_SET_PORTMAP=y CONFIG_IP_NF_SET_IPHASH=y CONFIG_IP_NF_SET_NETHASH=y CONFIG_IP_NF_SET_IPPORTHASH=y CONFIG_IP_NF_SET_IPTREE=y CONFIG_IP_NF_MATCH_SET=y CONFIG_IP_NF_TARGET_SET=y # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=y # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_RED is not set CONFIG_NET_SCH_SFQ=y # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_INGRESS is not set # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=y # CONFIG_NET_CLS_TCINDEX is not set CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y CONFIG_NET_CLS_U32=y # CONFIG_CLS_U32_PERF is not set CONFIG_CLS_U32_MARK=y # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_POLICE is not set # CONFIG_NET_CLS_IND is not set # CONFIG_NET_ESTIMATOR is not set # # Network testing # CONFIG_NET_PKTGEN=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set CONFIG_FIB_RULES=y # # Device Drivers # # # Generic Driver Options # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y # CONFIG_PROC_EVENTS is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_PNPACPI is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # # CONFIG_IBM_ASM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_TGT=y # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Macintosh device drivers # # CONFIG_MAC_EMUMOUSEBTN is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=y # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_SK98LIN=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # # CONFIG_I2C is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_VIDEO_SELECT is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set # # HID Devices # # CONFIG_HID is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # # CONFIG_RTC_CLASS is not set # # DMA Engine support # CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y # # DMA Devices # CONFIG_INTEL_IOATDMA=y # # Virtualization # # CONFIG_KVM is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager # # CONFIG_DLM is not set # # Instrumentation Support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_DEBUG_BUGVERBOSE=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_PLIST=y CONFIG_IOMAP_COPY=y ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [BUG] ethX misnumbered and one missing in mii-tool 2007-03-29 21:23 [BUG] ethX misnumbered and one missing in mii-tool Andrei Popa @ 2007-03-30 4:21 ` Jesse Brandeburg 2007-03-30 7:42 ` Andrei Popa 0 siblings, 1 reply; 6+ messages in thread From: Jesse Brandeburg @ 2007-03-30 4:21 UTC (permalink / raw) To: andrei.popa; +Cc: Linux Kernel Mailing List, NetDEV list added netdev. On 3/29/07, Andrei Popa <andrei.popa@i-neo.ro> wrote: > In a dual core 2 server with an intel motherboard and 5 network > cards(two onboard) and 1 pci express card with two slots and one pci-x > pci64 card the kernel sees all of them in dmesg but in mii-tool are > misnumbered and one card is missing. > (please CC as I am not subscribed to lkml) please don't use mii-tool, ethtool is a much better option and actually works with gigabit cards. > from dmesg: > Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI > Copyright (c) 1999-2005 Intel Corporation. > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:21:0c:08 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection eth0... > ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.1 to 64 > e1000: 0000:03:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:21:0c:09 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection eth0... > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:05:00.0 to 64 > e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:17:b7:68 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection eth0... > GSI 20 sharing vector 0xC9 and IRQ 20 > ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:05:00.1 to 64 > e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:17:b7:69 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection eth0... > GSI 21 sharing vector 0xD1 and IRQ 21 > ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 27 (level, low) -> IRQ 21 > e1000: 0000:06:02.0: e1000_probe: (PCI-X:100MHz:64-bit) > 00:0e:0c:ba:a8:50 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection eth0... um, I'm a little confused why every interface was named eth0 when it tried to come up. you didn't mention what kernel you're using. you can enable MSI and not share interrupts on this platform, it will at least help your PCIe adapters. > zeus ~ # mii-tool > eth2: no link > eth5: negotiated 100baseTx-FD, link ok > eth6: no link > eth7: no link > zeus ~ # > > it sees only 4 cards that are misnumbered and one is missing. what does 'ip link' or 'ifconfig -a' show? Jesse ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [BUG] ethX misnumbered and one missing in mii-tool 2007-03-30 4:21 ` Jesse Brandeburg @ 2007-03-30 7:42 ` Andrei Popa 2007-03-30 16:35 ` Lennart Sorensen 2007-03-30 16:43 ` Björn Steinbrink 0 siblings, 2 replies; 6+ messages in thread From: Andrei Popa @ 2007-03-30 7:42 UTC (permalink / raw) To: Jesse Brandeburg; +Cc: Linux Kernel Mailing List, NetDEV list On Thu, 2007-03-29 at 21:21 -0700, Jesse Brandeburg wrote: > added netdev. > > On 3/29/07, Andrei Popa <andrei.popa@i-neo.ro> wrote: > > In a dual core 2 server with an intel motherboard and 5 network > > cards(two onboard) and 1 pci express card with two slots and one pci-x > > pci64 card the kernel sees all of them in dmesg but in mii-tool are > > misnumbered and one card is missing. > > (please CC as I am not subscribed to lkml) > > please don't use mii-tool, ethtool is a much better option and > actually works with gigabit cards. ethtool reports the same > > > from dmesg: > > Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI > > Copyright (c) 1999-2005 Intel Corporation. > > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > > PCI: Setting latency timer of device 0000:03:00.0 to 64 > > e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > > 00:15:17:21:0c:08 > > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > > eth0... > > > ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 > > PCI: Setting latency timer of device 0000:03:00.1 to 64 > > e1000: 0000:03:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > > 00:15:17:21:0c:09 > > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > eth0... > > > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > > PCI: Setting latency timer of device 0000:05:00.0 to 64 > > e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > > 00:15:17:17:b7:68 > > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > eth0... > > GSI 20 sharing vector 0xC9 and IRQ 20 > > ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 20 > > PCI: Setting latency timer of device 0000:05:00.1 to 64 > > e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > > 00:15:17:17:b7:69 > > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > eth0... > > > GSI 21 sharing vector 0xD1 and IRQ 21 > > ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 27 (level, low) -> IRQ 21 > > e1000: 0000:06:02.0: e1000_probe: (PCI-X:100MHz:64-bit) > > 00:0e:0c:ba:a8:50 > > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > eth0... > > um, I'm a little confused why every interface was named eth0 when it > tried to come up. > you didn't mention what kernel you're using. this war kernel 2.6.17.14 and the driver was compiled as a module. with kernel 2.6.20.4(and build in e1000 driver): zeus ~ # uname -a Linux zeus 2.6.20.4-zeus3 #3 SMP Wed Mar 28 13:44:50 EEST 2007 x86_64 Intel(R) Xeon(TM) CPU 3.00GHz GenuineIntel GNU/Linux the devices are recognized ok as eth0,eth1.eth2,eth3,eth4 but misnumered and one missing int mii-tool/ethtool Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:21:0c:08 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.1 to 64 e1000: 0000:03:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:21:0c:09 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:17:b7:68 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:00.1 to 64 e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:17:b7:69 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 27 (level, low) -> IRQ 27 e1000: 0000:06:02.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:ba:a8:50 e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection zeus ~ # mii-tool eth2: no link eth5: negotiated 100baseTx-FD, link ok eth6: no link eth7: no link zeus ~ # ethtool shows the same > > you can enable MSI and not share interrupts on this platform, it will > at least help your PCIe adapters. Initialy I enabled it but I thought it was a problem from there and disabled it. > > > zeus ~ # mii-tool > > eth2: no link > > eth5: negotiated 100baseTx-FD, link ok > > eth6: no link > > eth7: no link > > zeus ~ # > > > > it sees only 4 cards that are misnumbered and one is missing. > > what does 'ip link' or 'ifconfig -a' show? zeus ~ # ip link 1: eth6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether 00:15:17:21:0c:08 brd ff:ff:ff:ff:ff:ff 2: eth5: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:17:21:0c:09 brd ff:ff:ff:ff:ff:ff 3: eth8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether 00:15:17:17:b7:68 brd ff:ff:ff:ff:ff:ff 4: eth7: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether 00:15:17:17:b7:69 brd ff:ff:ff:ff:ff:ff 5: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether 00:0e:0c:ba:a8:50 brd ff:ff:ff:ff:ff:ff 6: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 zeus ~ # zeus ~ # ifconfig -a eth2 Link encap:Ethernet HWaddr 00:0E:0C:BA:A8:50 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0x2000 Memory:b8a00000-b8a20000 eth5 Link encap:Ethernet HWaddr 00:15:17:21:0C:09 inet addr:192.168.0.1 Bcast:192.168.0.127 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58833 errors:0 dropped:0 overruns:0 frame:0 TX packets:201 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4058208 (3.8 Mb) TX bytes:48318 (47.1 Kb) Base address:0x4000 Memory:b8920000-b8940000 eth6 Link encap:Ethernet HWaddr 00:15:17:21:0C:08 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0x4020 Memory:b8960000-b8980000 eth7 Link encap:Ethernet HWaddr 00:15:17:17:B7:69 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0x3000 Memory:b8800000-b8820000 eth8 Link encap:Ethernet HWaddr 00:15:17:17:B7:68 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0x3020 Memory:b8820000-b8840000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > Jesse ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [BUG] ethX misnumbered and one missing in mii-tool 2007-03-30 7:42 ` Andrei Popa @ 2007-03-30 16:35 ` Lennart Sorensen 2007-03-30 17:18 ` Andrei Popa 2007-03-30 16:43 ` Björn Steinbrink 1 sibling, 1 reply; 6+ messages in thread From: Lennart Sorensen @ 2007-03-30 16:35 UTC (permalink / raw) To: Andrei Popa; +Cc: Jesse Brandeburg, Linux Kernel Mailing List, NetDEV list On Fri, Mar 30, 2007 at 10:42:23AM +0300, Andrei Popa wrote: > ethtool reports the same Is udev running and having fun renumbering interfaces as they are being detected in order to keep "consistent" interface names? -- Len Sorensen ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [BUG] ethX misnumbered and one missing in mii-tool 2007-03-30 16:35 ` Lennart Sorensen @ 2007-03-30 17:18 ` Andrei Popa 0 siblings, 0 replies; 6+ messages in thread From: Andrei Popa @ 2007-03-30 17:18 UTC (permalink / raw) To: Lennart Sorensen; +Cc: Jesse Brandeburg, Linux Kernel Mailing List, NetDEV list On Fri, 2007-03-30 at 12:35 -0400, Lennart Sorensen wrote: > On Fri, Mar 30, 2007 at 10:42:23AM +0300, Andrei Popa wrote: > > ethtool reports the same > > Is udev running and having fun renumbering interfaces as they are being > detected in order to keep "consistent" interface names? yes, it's udevs fault: zeus rules.d # cat 70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, probably run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single line. # PCI device 0x8086:0x1096 (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:15:17:17:b7:55", NAME="eth1" # PCI device 0x8086:0x1026 (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0e:0c:ba:a8:50", NAME="eth2" # PCI device 0x8086:0x1096 (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:15:17:17:b7:54", NAME="eth0" # PCI device 0x8086:0x1027 (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0e:0c:5f:84:84", NAME="eth3" # PCI device 0x1148:0x4320 (skge) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0c:46:46:7c:7f", NAME="eth4" # PCI device 0x8086:0x105e (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:15:17:21:0c:09", NAME="eth5" # PCI device 0x8086:0x105e (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:15:17:21:0c:08", NAME="eth6" # PCI device 0x8086:0x1096 (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:15:17:17:b7:69", NAME="eth7" # PCI device 0x8086:0x1096 (e1000) SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:15:17:17:b7:68", NAME="eth8" thanks for pointing this out. > > -- > Len Sorensen ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [BUG] ethX misnumbered and one missing in mii-tool 2007-03-30 7:42 ` Andrei Popa 2007-03-30 16:35 ` Lennart Sorensen @ 2007-03-30 16:43 ` Björn Steinbrink 1 sibling, 0 replies; 6+ messages in thread From: Björn Steinbrink @ 2007-03-30 16:43 UTC (permalink / raw) To: Andrei Popa; +Cc: Jesse Brandeburg, Linux Kernel Mailing List, NetDEV list On 2007.03.30 10:42:23 +0300, Andrei Popa wrote: > On Thu, 2007-03-29 at 21:21 -0700, Jesse Brandeburg wrote: > with kernel 2.6.20.4(and build in e1000 driver): > zeus ~ # uname -a > Linux zeus 2.6.20.4-zeus3 #3 SMP Wed Mar 28 13:44:50 EEST 2007 x86_64 > Intel(R) Xeon(TM) CPU 3.00GHz GenuineIntel GNU/Linux > > the devices are recognized ok as eth0,eth1.eth2,eth3,eth4 but misnumered > and one missing int mii-tool/ethtool > > Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI > Copyright (c) 1999-2006 Intel Corporation. > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > e1000: 0000:03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:21:0c:08 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.1 to 64 > e1000: 0000:03:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:21:0c:09 > e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:05:00.0 to 64 > e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:17:b7:68 > e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:05:00.1 to 64 > e1000: 0000:05:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) > 00:15:17:17:b7:69 > e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 27 (level, low) -> IRQ 27 > e1000: 0000:06:02.0: e1000_probe: (PCI-X:100MHz:64-bit) > 00:0e:0c:ba:a8:50 > e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection > > zeus ~ # mii-tool > eth2: no link > eth5: negotiated 100baseTx-FD, link ok > eth6: no link > eth7: no link > zeus ~ # > > ethtool shows the same The "misnaming" might be due to udev renaming the devices. Here, on debian, there are automatically created static rules for network devices in /etc/udev/rules.d/z25_persistent-net.rules, which you might want to adjust to meet your expectations. HTH Björn ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-03-30 17:19 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-03-29 21:23 [BUG] ethX misnumbered and one missing in mii-tool Andrei Popa 2007-03-30 4:21 ` Jesse Brandeburg 2007-03-30 7:42 ` Andrei Popa 2007-03-30 16:35 ` Lennart Sorensen 2007-03-30 17:18 ` Andrei Popa 2007-03-30 16:43 ` Björn Steinbrink
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox