From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: Juha Yrjola <juha.yrjola@solidboot.com>,
Tony Lindgren <tony@atomide.com>
Subject: [PATCH 1/90] ARM: OMAP: Place SMS and SDRC into smart idle mode
Date: Wed, 4 Apr 2007 13:46:28 -0400 [thread overview]
Message-ID: <11757088791107-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11757088774110-git-send-email-tony@atomide.com>
From: Juha Yrjola <juha.yrjola@solidboot.com>
Place SMS and SDRC into smart idle mode
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/io.c | 2 +
arch/arm/mach-omap2/memory.c | 48 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a0728c3..748920f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -26,6 +26,7 @@
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
extern void omap2_check_revision(void);
+extern void omap2_init_memory(void);
extern void gpmc_init(void);
/*
@@ -67,5 +68,6 @@ void __init omap2_init_common_hw(void)
{
omap2_mux_init();
omap2_clk_init();
+ omap2_init_memory();
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 85cbc2a..f173aa8 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -30,6 +30,38 @@
#include "prcm-regs.h"
#include "memory.h"
+#define SMS_BASE 0x68008000
+#define SMS_SYSCONFIG 0x010
+
+#define SDRC_BASE 0x68009000
+#define SDRC_SYSCONFIG 0x010
+#define SDRC_SYSSTATUS 0x014
+
+static const u32 sms_base = IO_ADDRESS(SMS_BASE);
+static const u32 sdrc_base = IO_ADDRESS(SDRC_BASE);
+
+
+static inline void sms_write_reg(int idx, u32 val)
+{
+ __raw_writel(val, sms_base + idx);
+}
+
+static inline u32 sms_read_reg(int idx)
+{
+ return __raw_readl(sms_base + idx);
+}
+
+static inline void sdrc_write_reg(int idx, u32 val)
+{
+ __raw_writel(val, sdrc_base + idx);
+}
+
+static inline u32 sdrc_read_reg(int idx)
+{
+ return __raw_readl(sdrc_base + idx);
+}
+
+
static struct memory_timings mem_timings;
u32 omap2_memory_get_slow_dll_ctrl(void)
@@ -99,3 +131,19 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
/* 90 degree phase for anything below 133Mhz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}
+
+void __init omap2_init_memory(void)
+{
+ u32 l;
+
+ l = sms_read_reg(SMS_SYSCONFIG);
+ l &= ~(0x3 << 3);
+ l |= (0x2 << 3);
+ sms_write_reg(SMS_SYSCONFIG, l);
+
+ l = sdrc_read_reg(SDRC_SYSCONFIG);
+ l &= ~(0x3 << 3);
+ l |= (0x2 << 3);
+ sdrc_write_reg(SDRC_SYSCONFIG, l);
+
+}
--
1.4.4.2
next prev parent reply other threads:[~2007-04-04 17:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-04 17:46 [PATCH 0/90] Post 2.6.21 OMAP update Tony Lindgren
2007-04-04 17:46 ` Tony Lindgren [this message]
2007-04-04 17:46 ` [PATCH 2/90] ARM: OMAP: Force APLLs always active Tony Lindgren
2007-04-04 17:46 ` [PATCH 3/90] ARM: OMAP: Add DMA IRQ sanity checks Tony Lindgren
2007-04-04 17:46 ` [PATCH 4/90] ARM: OMAP: Enable 24xx GPIO autoidling Tony Lindgren
2007-04-04 17:46 ` [PATCH 5/90] ARM: OMAP: Add function to print clock usecounts Tony Lindgren
2007-04-04 17:46 ` [PATCH 6/90] ARM: OMAP: Enable serial idling and wakeup features Tony Lindgren
2007-04-04 17:46 ` [PATCH 7/90] ARM: OMAP: Optimize INTC register accesses and enable autoidling Tony Lindgren
2007-04-04 17:46 ` [PATCH 8/90] ARM: OMAP: FB: add controller platform data Tony Lindgren
2007-04-04 18:27 ` [PATCH 0/90] Post 2.6.21 OMAP update Tony Lindgren
2007-04-04 18:39 ` Randy Dunlap
2007-04-04 18:44 ` Tony Lindgren
2007-04-04 21:44 ` Alan Cox
2007-04-05 13:21 ` Tony Lindgren
2007-04-05 16:31 ` Roland Dreier
2007-04-05 18:03 ` Tony Lindgren
2007-04-05 18:29 ` Roland Dreier
2007-04-09 21:45 ` Tony Lindgren
2007-04-05 20:27 ` Alan Cox
2007-04-06 7:18 ` Russell King
2007-04-09 21:49 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11757088791107-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=juha.yrjola@solidboot.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox