From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: David Brownell <dbrownell@users.sourceforge.net>,
Tony Lindgren <tony@atomide.com>
Subject: [PATCH 21/90] ARM: OMAP: gpio object shrinkage, cleanup
Date: Wed, 4 Apr 2007 14:05:00 -0400 [thread overview]
Message-ID: <11757100181189-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11757100163760-git-send-email-tony@atomide.com>
From: David Brownell <dbrownell@users.sourceforge.net>
More GPIO/IRQ cleanup:
- compile-time removal of much useless code
* mpuio support on non-OMAP1.
* 15xx/730/24xx gpio support on 1610
* 15xx/730/16xx gpio support on 24xx
* etc
- remove all BUG() calls, which are always bad news ... replaced some
with normal fault reports for that call, others with WARN_ON(1).
- small mpuio bugfix: add missing set_type() method
Oh, and fix a minor merge issue: inode->u.generic_ip is now gone.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/gpio.c | 166 +++++++++++++++++++++++++++++++++++----------
1 files changed, 130 insertions(+), 36 deletions(-)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 970439e..948185e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -267,21 +267,34 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
u32 l;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_IO_CNTL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DIR_CONTROL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DIRECTION;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DIR_CONTROL;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
+#endif
+ default:
+ WARN_ON(1);
+ return;
}
l = __raw_readl(reg);
if (is_input)
@@ -309,6 +322,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
u32 l = 0;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_OUTPUT;
l = __raw_readl(reg);
@@ -317,6 +331,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
@@ -325,6 +341,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (enable)
reg += OMAP1610_GPIO_SET_DATAOUT;
@@ -332,6 +350,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
reg += OMAP1610_GPIO_CLEAR_DATAOUT;
l = 1 << gpio;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_OUTPUT;
l = __raw_readl(reg);
@@ -340,6 +360,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
else
l &= ~(1 << gpio);
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -347,8 +369,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
reg += OMAP24XX_GPIO_CLEARDATAOUT;
l = 1 << gpio;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(l, reg);
@@ -372,28 +395,37 @@ int omap_get_gpio_datain(int gpio)
void __iomem *reg;
if (check_gpio(gpio) < 0)
- return -1;
+ return -EINVAL;
bank = get_gpio_bank(gpio);
reg = bank->base;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_INPUT_LATCH;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_DATA_INPUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_DATAIN;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DATA_INPUT;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
+#endif
default:
- BUG();
- return -1;
+ return -EINVAL;
}
return (__raw_readl(reg)
& (1 << get_gpio_index(gpio))) != 0;
@@ -443,6 +475,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
u32 l = 0;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
@@ -453,6 +486,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
@@ -463,6 +498,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
goto bad;
break;
+#endif
#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (gpio & 0x08)
@@ -470,9 +506,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else
reg += OMAP1610_GPIO_EDGE_CTRL1;
gpio &= 0x07;
- /* We allow only edge triggering, i.e. two lowest bits */
- if (trigger & (__IRQT_LOWLVL | __IRQT_HIGHLVL))
- BUG();
l = __raw_readl(reg);
l &= ~(3 << (gpio << 1));
if (trigger & __IRQT_RISEDGE)
@@ -504,7 +537,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
break;
#endif
default:
- BUG();
goto bad;
}
__raw_writel(l, reg);
@@ -519,7 +551,7 @@ static int gpio_irq_type(unsigned irq, unsigned type)
unsigned gpio;
int retval;
- if (irq > IH_MPUIO_BASE)
+ if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
else
gpio = irq - IH_GPIO_BASE;
@@ -527,9 +559,12 @@ static int gpio_irq_type(unsigned irq, unsigned type)
if (check_gpio(gpio) < 0)
return -EINVAL;
- if (type & IRQT_PROBE)
+ if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
- if (!cpu_is_omap24xx() && (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL)))
+
+ /* OMAP1 allows only only edge triggering */
+ if (!cpu_is_omap24xx()
+ && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
return -EINVAL;
bank = get_gpio_bank(gpio);
@@ -548,24 +583,34 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
void __iomem *reg = bank->base;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
/* MPUIO irqstatus is reset by reading the status register,
* so do nothing here */
return;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_STATUS;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_IRQSTATUS1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_STATUS;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(gpio_mask, reg);
@@ -588,31 +633,41 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
u32 mask;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT;
mask = 0xffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK;
mask = 0xffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
reg += OMAP1610_GPIO_IRQENABLE1;
mask = 0xffff;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK;
mask = 0xffffffff;
inv = 1;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return 0;
}
@@ -629,6 +684,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
u32 l;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_MASKIT;
l = __raw_readl(reg);
@@ -637,6 +693,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_MASK;
l = __raw_readl(reg);
@@ -645,6 +703,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
if (enable)
reg += OMAP1610_GPIO_SET_IRQENABLE1;
@@ -652,6 +712,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
l = gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_MASK;
l = __raw_readl(reg);
@@ -660,6 +722,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
else
l |= gpio_mask;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -667,8 +731,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
l = gpio_mask;
break;
+#endif
default:
- BUG();
+ WARN_ON(1);
return;
}
__raw_writel(l, reg);
@@ -837,8 +902,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
desc->chip->ack(irq);
bank = get_irq_data(irq);
+#ifdef CONFIG_ARCH_OMAP1
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510)
isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
@@ -984,6 +1051,22 @@ static void gpio_unmask_irq(unsigned int irq)
_set_gpio_irqenable(bank, gpio_idx, 1);
}
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
+ .shutdown = gpio_irq_shutdown,
+ .ack = gpio_ack_irq,
+ .mask = gpio_mask_irq,
+ .unmask = gpio_unmask_irq,
+ .set_type = gpio_irq_type,
+ .set_wake = gpio_wake_enable,
+};
+
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+/* MPUIO uses the always-on 32k clock */
+
static void mpuio_ack_irq(unsigned int irq)
{
/* The ISR is reset automatically, so do nothing here. */
@@ -1005,23 +1088,26 @@ static void mpuio_unmask_irq(unsigned int irq)
_set_gpio_irqenable(bank, gpio, 1);
}
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .shutdown = gpio_irq_shutdown,
- .ack = gpio_ack_irq,
- .mask = gpio_mask_irq,
- .unmask = gpio_unmask_irq,
+static struct irq_chip mpuio_irq_chip = {
+ .name = "MPUIO",
+ .ack = mpuio_ack_irq,
+ .mask = mpuio_mask_irq,
+ .unmask = mpuio_unmask_irq
.set_type = gpio_irq_type,
- .set_wake = gpio_wake_enable,
};
-static struct irq_chip mpuio_irq_chip = {
- .name = "MPUIO",
- .ack = mpuio_ack_irq,
- .mask = mpuio_mask_irq,
- .unmask = mpuio_unmask_irq,
- .set_type = gpio_irq_type,
-};
+
+#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
+
+#else
+
+extern struct irq_chip mpuio_irq_chip;
+
+#define bank_is_mpuio(bank) 0
+
+#endif
+
+/*---------------------------------------------------------------------*/
static int initialized;
static struct clk * gpio_ick;
@@ -1097,9 +1183,8 @@ static int __init _omap_gpio_init(void)
bank->reserved_map = 0;
bank->base = IO_ADDRESS(bank->base);
spin_lock_init(&bank->lock);
- if (bank->method == METHOD_MPUIO) {
+ if (bank_is_mpuio(bank))
omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
- }
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) {
__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
@@ -1140,7 +1225,7 @@ static int __init _omap_gpio_init(void)
#endif
for (j = bank->virtual_irq_start;
j < bank->virtual_irq_start + gpio_count; j++) {
- if (bank->method == METHOD_MPUIO)
+ if (bank_is_mpuio(bank))
set_irq_chip(j, &mpuio_irq_chip);
else
set_irq_chip(j, &gpio_irq_chip);
@@ -1180,16 +1265,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
void __iomem *wake_set;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
+#endif
default:
continue;
}
@@ -1217,14 +1306,18 @@ static int omap_gpio_resume(struct sys_device *dev)
void __iomem *wake_set;
switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
case METHOD_GPIO_1610:
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
+#endif
default:
continue;
}
@@ -1404,7 +1497,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
unsigned bankwidth = 16;
u32 mask = 1;
- if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO)
+ if (bank_is_mpuio(bank))
gpio = OMAP_MPUIO(0);
else if (cpu_is_omap24xx() || cpu_is_omap730())
bankwidth = 32;
@@ -1419,7 +1512,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
value = omap_get_gpio_datain(gpio);
is_in = gpio_is_input(bank, mask);
- if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO)
+ if (bank_is_mpuio(bank))
seq_printf(s, "MPUIO %2d: ", j);
else
seq_printf(s, "GPIO %3d: ", gpio);
@@ -1460,7 +1553,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
seq_printf(s, "\n");
}
- if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO) {
+ if (bank_is_mpuio(bank)) {
seq_printf(s, "\n");
gpio = 0;
}
@@ -1470,7 +1563,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
static int dbg_gpio_open(struct inode *inode, struct file *file)
{
- return single_open(file, dbg_gpio_show, inode->u.generic_ip/*i_private*/);
+ return single_open(file, dbg_gpio_show, &inode->i_private);
}
static const struct file_operations debug_fops = {
@@ -1482,7 +1575,8 @@ static const struct file_operations debug_fops = {
static int __init omap_gpio_debuginit(void)
{
- (void) debugfs_create_file("omap_gpio", S_IRUGO, NULL, NULL, &debug_fops);
+ (void) debugfs_create_file("omap_gpio", S_IRUGO,
+ NULL, NULL, &debug_fops);
return 0;
}
late_initcall(omap_gpio_debuginit);
--
1.4.4.2
next prev parent reply other threads:[~2007-04-04 18:38 UTC|newest]
Thread overview: 160+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-04 18:04 [PATCH 9/90] ARM: OMAP: Palm Tungsten E board update Tony Lindgren
2007-04-04 18:04 ` [PATCH 10/90] ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon Tony Lindgren
2007-04-04 18:04 ` [PATCH 11/90] ARM: OMAP: Add support for Amstrad Delta keypad Tony Lindgren
2007-04-04 18:04 ` [PATCH 12/90] ARM: OMAP: Fix apollon boot Tony Lindgren
2007-04-04 18:04 ` [PATCH 13/90] ARM: OMAP: /sys/kernel/debug/omap_gpio Tony Lindgren
2007-04-04 18:04 ` [PATCH 14/90] ARM: OMAP: omap2/memory.c compile fixes Tony Lindgren
2007-04-04 18:04 ` [PATCH 15/90] ARM: OMAP: 24xx pinmux updates Tony Lindgren
2007-04-04 18:04 ` [PATCH 16/90] ARM: OMAP: omap2/gpmc updates Tony Lindgren
2007-04-04 18:04 ` [PATCH 17/90] ARM: OMAP: Enable DSP clocks for McBSP on omap310 Tony Lindgren
2007-04-04 18:04 ` [PATCH 18/90] ARM: OMAP: PalmZ71 support Tony Lindgren
2007-04-04 18:04 ` [PATCH 19/90] ARM: OMAP: Register tsc2102 on Palm Tungsten E Tony Lindgren
2007-04-04 18:04 ` [PATCH 20/90] ARM: OMAP: gpio init section cleanups Tony Lindgren
2007-04-04 18:05 ` Tony Lindgren [this message]
2007-04-04 18:05 ` [PATCH 22/90] ARM: OMAP: Fix Amstrad Delta omap-keypad usage Tony Lindgren
2007-04-04 18:05 ` [PATCH 23/90] ARM: OMAP: PalmZ71 extra brace fix Tony Lindgren
2007-04-04 18:05 ` [PATCH 24/90] ARM: OMAP: Fix typo in gpio Tony Lindgren
2007-04-04 18:05 ` [PATCH 25/90] ARM: OMAP: h4 must have blinky leds!! Tony Lindgren
2007-04-04 18:05 ` [PATCH 26/90] ARM: OMAP: abstract debug card setup (smc, leds) Tony Lindgren
2007-04-04 18:05 ` [PATCH 27/90] ARM: OMAP: Add minimal OMAP2430 support Tony Lindgren
2007-04-04 18:05 ` [PATCH 28/90] ARM: OMAP: USB peripheral support on H4 Tony Lindgren
2007-04-04 18:05 ` [PATCH 29/90] ARM: OMAP: Palm Tungsten|T support Tony Lindgren
2007-04-04 18:05 ` [PATCH 30/90] ARM: OMAP: Palm Zire71 minor fixes Tony Lindgren
2007-04-04 18:05 ` [PATCH 31/90] ARM: OMAP: plat-omap changes for 2430 SDP Tony Lindgren
2007-04-04 18:05 ` [PATCH 32/90] ARM: OMAP: Basic support for siemens sx1 Tony Lindgren
2007-04-04 18:05 ` [PATCH 33/90] ARM: OMAP: This patch enables I2C-2 support for 2430 SDP Tony Lindgren
2007-04-04 18:05 ` [PATCH 34/90] ARM: OMAP: Set keypad sense delays for the Palms Tony Lindgren
2007-04-04 18:05 ` [PATCH 35/90] ARM: OMAP: speed up gpio irq handling Tony Lindgren
2007-04-04 18:05 ` [PATCH 36/90] ARM: OMAP: Fix typo in board-h4.h Tony Lindgren
2007-04-04 18:05 ` [PATCH 37/90] ARM: OMAP: MPUIO wake updates Tony Lindgren
2007-04-04 18:05 ` [PATCH 38/90] ARM: OMAP: Sync headers with linux-omap Tony Lindgren
2007-04-04 18:05 ` [PATCH 39/90] ARM: OMAP: Sync core code " Tony Lindgren
2007-04-04 18:05 ` [PATCH 40/90] ARM: OMAP: Sync board specific files " Tony Lindgren
2007-04-04 18:05 ` [PATCH 41/90] ARM: OMAP: Avoid updating system time for sub-jiffy interrupts Tony Lindgren
2007-04-04 18:05 ` [PATCH 42/90] ARM: OMAP: Tabify mux.c Tony Lindgren
2007-04-04 18:05 ` [PATCH 43/90] ARM: OMAP: TUSB EVM init Tony Lindgren
2007-04-04 18:05 ` [PATCH 44/90] ARM: OMAP: Add mailbox support for IVA Tony Lindgren
2007-04-04 18:05 ` [PATCH 45/90] ARM: OMAP: Update omap h2 defconfig Tony Lindgren
2007-04-04 18:05 ` [PATCH 46/90] ARM: OMAP: Add omap osk defconfig Tony Lindgren
2007-04-04 18:05 ` [PATCH 47/90] ARM: OMAP: Fix gpmc header Tony Lindgren
2007-04-04 18:05 ` [PATCH 48/90] ARM: OMAP: I2C-1 init fix for 2430 Tony Lindgren
2007-04-04 18:05 ` [PATCH 49/90] ARM: OMAP: update board 2430 file for TWL PIH interrupts Tony Lindgren
2007-04-04 18:05 ` [PATCH 50/90] ARM: OMAP: board-sdp2430.c Remove unnecessary #includes Tony Lindgren
2007-04-04 18:05 ` [PATCH 51/90] ARM: OMAP: osk+mistral backlight, power, board specific Tony Lindgren
2007-04-04 18:05 ` [PATCH 52/90] ARM: OMAP: cleanup apollon board Tony Lindgren
2007-04-04 18:05 ` [PATCH 53/90] ARM: OMAP: Fix warning in timer32k.c Tony Lindgren
2007-04-04 18:05 ` [PATCH 54/90] ARM: OMAP: Update timer32k.c to compile Tony Lindgren
2007-04-04 18:05 ` [PATCH 55/90] ARM: OMAP: H3 workqueue fixes Tony Lindgren
2007-04-04 18:05 ` [PATCH 56/90] ARM: OMAP: Make board-palmz71 compile again Tony Lindgren
2007-04-04 18:05 ` [PATCH 57/90] ARM: OMAP: omap camera builds again; Mistral init and mux Tony Lindgren
2007-04-04 18:05 ` [PATCH 58/90] ARM: OMAP: musb_hdrc: tusb dma patch, minor Tony Lindgren
2007-04-04 18:05 ` [PATCH 59/90] ARM: OMAP: Mostly cosmetic to sync up with linux-omap tree Tony Lindgren
2007-04-04 18:05 ` [PATCH 60/90] ARM: OMAP: Merge gpmc changes from N800 tree Tony Lindgren
2007-04-04 18:05 ` [PATCH 61/90] ARM: OMAP: Merge driver headers " Tony Lindgren
2007-04-04 18:05 ` [PATCH 62/90] ARM: OMAP: Merge board specific files " Tony Lindgren
2007-04-04 18:05 ` [PATCH 63/90] ARM: OMAP: Merge PM code " Tony Lindgren
2007-04-04 18:05 ` [PATCH 64/90] ARM: OMAP: Fix warning in pm.c Tony Lindgren
2007-04-04 18:05 ` [PATCH 65/90] ARM: OMAP: Convert interrupt flags SA_* to IRQF_* Tony Lindgren
2007-04-04 18:05 ` [PATCH 66/90] ARM: OMAP: Sync framebuffer headers with N800 tree Tony Lindgren
2007-04-04 18:05 ` [PATCH 67/90] ARM: OMAP: Replace mach-omap/omap2 with mach-omap2 Tony Lindgren
2007-04-04 18:05 ` [PATCH 68/90] ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations) Tony Lindgren
2007-04-04 18:05 ` [PATCH 69/90] ARM: OMAP: add SoSSI clock Tony Lindgren
2007-04-04 18:05 ` [PATCH 70/90] ARM: OMAP: add SoSSI clock (call propagate_rate for childrens) Tony Lindgren
2007-04-04 18:05 ` [PATCH 71/90] ARM: OMAP: add SoSSI clock (remove manual checking of SoSSI state from idle) Tony Lindgren
2007-04-04 18:05 ` [PATCH 72/90] ARM: OMAP: N770: add missing LCD, LCD controller, touchscreen device registration Tony Lindgren
2007-04-04 18:05 ` [PATCH 73/90] ARM: OMAP: Add onennand board specific support for N800 Tony Lindgren
2007-04-04 18:05 ` [PATCH 74/90] ARM: OMAP: N800: Update board-specific audio support Tony Lindgren
2007-04-04 18:05 ` [PATCH 75/90] ARM: OMAP: 243x: Add mappings for SDRC and SMS Tony Lindgren
2007-04-04 18:05 ` [PATCH 76/90] ARM: OMAP: Device init for OMAP24xx Enhanced Audio Controller Tony Lindgren
2007-04-04 18:05 ` [PATCH 77/90] ARM: OMAP: Add apollon gpio keys using gpio-keys input Tony Lindgren
2007-04-04 18:05 ` [PATCH 78/90] ARM: OMAP: TSC2101: add platform init / registration to board files Tony Lindgren
2007-04-04 18:05 ` [PATCH 79/90] ARM: OMAP: fix H4 dependencies again Tony Lindgren
2007-04-04 18:05 ` [PATCH 80/90] ARM: OMAP: partial LED fixes Tony Lindgren
2007-04-04 18:06 ` [PATCH 81/90] ARM: OMAP: omap2/pm.c build fix Tony Lindgren
2007-04-04 18:06 ` [PATCH 82/90] ARM: OMAP: restore CONFIG_GENERIC_TIME Tony Lindgren
2007-04-04 18:06 ` [PATCH 83/90] ARM: OMAP: Fix GCC-reported compile time bug Tony Lindgren
2007-04-04 18:06 ` [PATCH 84/90] ARM: OMAP: Update changed TSC2301 config names in N800 board files Tony Lindgren
2007-04-04 18:06 ` [PATCH 85/90] ARM: OMAP: Fix PRCM base register usage for 243x Tony Lindgren
2007-04-04 18:06 ` [PATCH 86/90] ARM: OMAP: fix OMAP1 dmtimer build warning Tony Lindgren
2007-04-04 18:06 ` [PATCH 87/90] ARM: OMAP: fix OMAP1 mpuio suspend/resume oops Tony Lindgren
2007-04-04 18:06 ` [PATCH 88/90] ARM: OMAP: OSK led fixes Tony Lindgren
2007-04-04 18:06 ` [PATCH 89/90] ARM: OMAP: Activate MPU retention code in omap2/pm.c Tony Lindgren
2007-04-04 18:06 ` [PATCH 90/90] ARM: OMAP: H2 lcd updates for SPI framework Tony Lindgren
2007-04-05 6:10 ` [PATCH 84/90] ARM: OMAP: Update changed TSC2301 config names in N800 board files Jarkko Nikula
2007-04-05 15:47 ` Tony Lindgren
2007-04-04 20:39 ` [PATCH 73/90] ARM: OMAP: Add onennand board specific support for N800 Randy Dunlap
2007-04-05 15:30 ` Tony Lindgren
2007-04-04 20:52 ` [PATCH 68/90] ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations) Randy Dunlap
2007-04-05 15:39 ` Tony Lindgren
2007-04-05 15:18 ` [PATCH 64/90] ARM: OMAP: Fix warning in pm.c Tony Lindgren
2007-04-04 21:51 ` [PATCH 63/90] ARM: OMAP: Merge PM code from N800 tree Randy Dunlap
2007-04-05 18:20 ` Tony Lindgren
2007-04-04 21:18 ` [PATCH 62/90] ARM: OMAP: Merge board specific files " Randy Dunlap
2007-04-05 19:48 ` Tony Lindgren
2007-04-05 14:43 ` [PATCH 60/90] ARM: OMAP: Merge gpmc changes " Tony Lindgren
2007-04-05 15:17 ` [PATCH 56/90] ARM: OMAP: Make board-palmz71 compile again Tony Lindgren
2007-04-05 15:17 ` [PATCH 55/90] ARM: OMAP: H3 workqueue fixes Tony Lindgren
2007-04-04 19:14 ` [PATCH 53/90] ARM: OMAP: Fix warning in timer32k.c Randy Dunlap
2007-04-05 15:15 ` Tony Lindgren
2007-04-04 19:12 ` [PATCH 51/90] ARM: OMAP: osk+mistral backlight, power, board specific Randy Dunlap
2007-04-05 15:28 ` Tony Lindgren
2007-04-04 18:44 ` [PATCH 43/90] ARM: OMAP: TUSB EVM init Randy Dunlap
2007-04-05 14:42 ` Tony Lindgren
2007-04-06 12:09 ` [PATCH 29/90] ARM: OMAP: Palm Tungsten|T support Pavel Machek
2007-04-08 12:07 ` Russell King
2007-04-08 12:12 ` Pavel Machek
2007-04-08 12:31 ` Dagfinn Ilmari Mannsåker
2007-04-08 13:58 ` Russell King
2007-04-08 14:40 ` Russell King
2007-04-09 11:13 ` Pavel Machek
2007-04-06 12:07 ` [PATCH 28/90] ARM: OMAP: USB peripheral support on H4 Pavel Machek
2007-04-09 21:42 ` Tony Lindgren
2007-04-04 19:00 ` [PATCH 25/90] ARM: OMAP: h4 must have blinky leds!! Randy Dunlap
2007-04-04 19:13 ` David Brownell
2007-04-04 19:22 ` Randy Dunlap
2007-04-04 20:06 ` Jan Engelhardt
2007-04-04 20:42 ` Dmitry Torokhov
2007-04-04 20:51 ` David Brownell
2007-04-04 21:26 ` Randy Dunlap
2007-04-05 2:15 ` Jan Engelhardt
2007-04-05 4:18 ` Randy Dunlap
2007-04-05 18:19 ` David Brownell
2007-04-05 18:29 ` Randy Dunlap
2007-04-05 20:35 ` Jan Engelhardt
2007-04-06 17:29 ` coding style for long conditions (WAS: Re: [PATCH 25/90] ... blinky leds!!) David Brownell
2007-04-06 19:03 ` Stefan Richter
2007-04-06 21:05 ` David Brownell
2007-04-06 21:37 ` Jeremy Fitzhardinge
2007-04-06 21:54 ` David Brownell
2007-04-06 21:38 ` coding style for long conditions Roland Dreier
2007-04-06 21:50 ` Zan Lynx
2007-04-06 22:05 ` David Brownell
2007-04-06 22:07 ` Jan Engelhardt
2007-04-06 22:43 ` David Brownell
2007-04-09 15:45 ` Scott Preece
2007-04-06 21:40 ` coding style for long conditions (WAS: Re: [PATCH 25/90] ... blinky leds!!) Randy Dunlap
2007-04-06 21:46 ` Stefan Richter
2007-04-06 21:53 ` Jan Engelhardt
2007-04-07 0:16 ` Krzysztof Halasa
2007-04-06 22:17 ` Thomas Gleixner
2007-04-06 22:57 ` David Brownell
2007-04-06 23:21 ` Thomas Gleixner
2007-04-06 23:34 ` David Brownell
2007-04-07 8:01 ` coding style for long conditions Junio C Hamano
2007-04-09 15:14 ` David Brownell
2007-04-08 6:19 ` coding style for long conditions (WAS: Re: [PATCH 25/90] ... blinky leds!!) Dmitry Torokhov
2007-04-08 13:24 ` Scott Preece
2007-04-06 19:16 ` Jan Engelhardt
2007-04-06 20:57 ` David Brownell
2007-04-06 22:04 ` Jan Engelhardt
2007-04-06 22:40 ` David Brownell
2007-04-06 23:50 ` Jan Engelhardt
2007-04-04 20:47 ` [PATCH 25/90] ARM: OMAP: h4 must have blinky leds!! Dmitry Torokhov
2007-04-04 20:59 ` David Brownell
2007-04-04 18:29 ` [PATCH 18/90] ARM: OMAP: PalmZ71 support Randy Dunlap
2007-04-05 14:14 ` Tony Lindgren
2007-04-04 18:41 ` [PATCH 12/90] ARM: OMAP: Fix apollon boot Randy Dunlap
2007-04-05 14:24 ` Tony Lindgren
2007-04-04 20:57 ` [PATCH 11/90] ARM: OMAP: Add support for Amstrad Delta keypad Dmitry Torokhov
2007-04-04 22:05 ` Jonathan McDowell
2007-04-05 2:45 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11757100181189-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox