From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: Marek Vasut <marek.vasut@gmail.com>, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 1/6] ARM: OMAP: Enable DSP clocks for McBSP on omap310
Date: Mon, 9 Apr 2007 17:25:39 -0400 [thread overview]
Message-ID: <1176153948771-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1176153944991-git-send-email-tony@atomide.com>
From: Marek Vasut <marek.vasut@gmail.com>
This patch enables some clock on omap310.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/clock.h | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -282,7 +282,7 @@ static struct clk arminth_ck16xx = {
static struct clk dsp_ck = {
.name = "dsp_ck",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL,
.enable_reg = (void __iomem *)ARM_CKCTL,
.enable_bit = EN_DSPCK,
@@ -295,7 +295,7 @@ static struct clk dsp_ck = {
static struct clk dspmmu_ck = {
.name = "dspmmu_ck",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | ALWAYS_ENABLED,
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
@@ -306,7 +306,7 @@ static struct clk dspmmu_ck = {
static struct clk dspper_ck = {
.name = "dspper_ck",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | VIRTUAL_IO_ADDRESS,
.enable_reg = (void __iomem *)DSP_IDLECT2,
.enable_bit = EN_PERCK,
@@ -320,7 +320,7 @@ static struct clk dspper_ck = {
static struct clk dspxor_ck = {
.name = "dspxor_ck",
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_IO_ADDRESS,
.enable_reg = (void __iomem *)DSP_IDLECT2,
.enable_bit = EN_XORPCK,
@@ -332,7 +332,7 @@ static struct clk dspxor_ck = {
static struct clk dsptim_ck = {
.name = "dsptim_ck",
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_IO_ADDRESS,
.enable_reg = (void __iomem *)DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
@@ -374,7 +374,7 @@ static struct clk arminth_ck1510 = {
static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
- .name = "tibp_ck",
+ .name = "tipb_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ALWAYS_ENABLED,
@@ -733,7 +733,7 @@ remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+ .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
ALWAYS_ENABLED,
.parent = &armxor_ck.clk,
--
1.4.4.2
next prev parent reply other threads:[~2007-04-09 21:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-09 21:25 [PATCH 0/6] ARM: OMAP: Updates for OMAP1 common code Tony Lindgren
2007-04-09 21:25 ` Tony Lindgren [this message]
2007-04-09 21:25 ` [PATCH 2/6] ARM: OMAP: omap camera builds again; Mistral init and mux Tony Lindgren
2007-04-09 21:25 ` [PATCH 3/6] ARM: OMAP: add SoSSI clock Tony Lindgren
2007-04-09 21:25 ` [PATCH 4/6] ARM: OMAP: add SoSSI clock (remove manual checking of SoSSI state from idle) Tony Lindgren
2007-04-09 21:25 ` [PATCH 5/6] ARM: OMAP: fix OMAP1 dmtimer build warning Tony Lindgren
2007-04-09 21:25 ` [PATCH 6/6] ARM: OMAP: OSK led fixes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1176153948771-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marek.vasut@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox