From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: Imre Deak <imre.deak@solidboot.com>, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 3/6] ARM: OMAP: add SoSSI clock
Date: Mon, 9 Apr 2007 17:25:41 -0400 [thread overview]
Message-ID: <11761539553166-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11761539511877-git-send-email-tony@atomide.com>
From: Imre Deak <imre.deak@solidboot.com>
This is needed, so that disabling the SoSSI clock during idle can
be prevented.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/clock.c | 34 ++++++++++++++++++++++++++++++++++
arch/arm/mach-omap1/clock.h | 21 +++++++++++++++++++--
2 files changed, 53 insertions(+), 2 deletions(-)
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -49,6 +49,15 @@ static void omap1_uart_recalc(struct clk * clk)
clk->rate = 12000000;
}
+static void omap1_sossi_recalc(struct clk *clk)
+{
+ u32 div = omap_readl(MOD_CONF_CTRL_1);
+
+ div = (div >> 17) & 0x7;
+ div++;
+ clk->rate = clk->parent->rate / div;
+}
+
static int omap1_clk_enable_dsp_domain(struct clk *clk)
{
int retval;
@@ -396,6 +405,31 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
return 0;
}
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+{
+ u32 l;
+ int div;
+ unsigned long p_rate;
+
+ p_rate = clk->parent->rate;
+ /* Round towards slower frequency */
+ div = (p_rate + rate - 1) / rate;
+ div--;
+ if (div < 0 || div > 7)
+ return -EINVAL;
+
+ l = omap_readl(MOD_CONF_CTRL_1);
+ l &= ~(7 << 17);
+ l |= div << 17;
+ omap_writel(l, MOD_CONF_CTRL_1);
+
+ clk->rate = p_rate / (div + 1);
+ if (unlikely(clk->flags & RATE_PROPAGATES))
+ propagate_rate(clk);
+
+ return 0;
+}
+
static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
{
return 96000000 / calc_ext_dsor(rate);
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,6 +17,8 @@ static int omap1_clk_enable_generic(struct clk * clk);
static void omap1_clk_disable_generic(struct clk * clk);
static void omap1_ckctl_recalc(struct clk * clk);
static void omap1_watchdog_recalc(struct clk * clk);
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+static void omap1_sossi_recalc(struct clk *clk);
static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
static int omap1_clk_enable_dsp_domain(struct clk * clk);
static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
@@ -168,9 +170,10 @@ static struct clk ck_dpll1 = {
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
- .name = "ck_dpll1out",
+ .name = "ck_dpll1out",
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+ .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
+ ENABLE_REG_32BIT | RATE_PROPAGATES,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
@@ -180,6 +183,19 @@ static struct arm_idlect1_clk ck_dpll1out = {
.idlect_shift = 12,
};
+static struct clk sossi_ck = {
+ .name = "ck_sossi",
+ .parent = &ck_dpll1out.clk,
+ .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
+ ENABLE_REG_32BIT,
+ .enable_reg = (void __iomem *)MOD_CONF_CTRL_1,
+ .enable_bit = 16,
+ .recalc = &omap1_sossi_recalc,
+ .set_rate = &omap1_set_sossi_rate,
+ .enable = &omap1_clk_enable_generic,
+ .disable = &omap1_clk_disable_generic,
+};
+
static struct clk arm_ck = {
.name = "arm_ck",
.parent = &ck_dpll1,
@@ -760,6 +776,7 @@ static struct clk * onchip_clks[] = {
&ck_dpll1,
/* CK_GEN1 clocks */
&ck_dpll1out.clk,
+ &sossi_ck,
&arm_ck,
&armper_ck.clk,
&arm_gpio_ck,
--
1.4.4.2
next prev parent reply other threads:[~2007-04-09 21:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-09 21:25 [PATCH 0/6] ARM: OMAP: Updates for OMAP1 common code Tony Lindgren
2007-04-09 21:25 ` [PATCH 1/6] ARM: OMAP: Enable DSP clocks for McBSP on omap310 Tony Lindgren
2007-04-09 21:25 ` [PATCH 2/6] ARM: OMAP: omap camera builds again; Mistral init and mux Tony Lindgren
2007-04-09 21:25 ` Tony Lindgren [this message]
2007-04-09 21:25 ` [PATCH 4/6] ARM: OMAP: add SoSSI clock (remove manual checking of SoSSI state from idle) Tony Lindgren
2007-04-09 21:25 ` [PATCH 5/6] ARM: OMAP: fix OMAP1 dmtimer build warning Tony Lindgren
2007-04-09 21:25 ` [PATCH 6/6] ARM: OMAP: OSK led fixes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11761539553166-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=imre.deak@solidboot.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox