From: Nathan Scott <nscott@aconex.com>
To: xfs-masters@oss.sgi.com
Cc: Christoph Hellwig <hch@lst.de>, David Chinner <dgc@sgi.com>,
Michal Piotrowski <michal.k.k.piotrowski@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org
Subject: Re: [xfs-masters] Re: 2.6.22-rc1-mm1
Date: Wed, 23 May 2007 09:23:10 +1000 [thread overview]
Message-ID: <1179876190.6273.532.camel@edge> (raw)
In-Reply-To: <20070522104429.GN86004887@sgi.com>
On Tue, 2007-05-22 at 20:44 +1000, David Chinner wrote:
>
> > xfs_buf_associate_memory is a mess. My original plan was to get rid
> of
> > it, but I kept that out to keep that patchset small and easily
> reviable,
> > but it seems like that was a mistake. My plan is the following:
> >
> > - xlog_bread and thus the whole buffer I/O path grows an iooffset
> > paramater that specifies at which offset into the buffer we start
> > the actual I/O. That gets rid of all the
> xfs_buf_associate_memory
> > memory uses in the log recovery code
>
> Perhaps a new field in the xfs_buf structure - that way call paths
> don't need to grow extra parameters and potentially increase
Thatd be unfortunate - there are very few iclog buffers relative to
every other metadata buffer, so growing the struct for all of those
too would not be ideal (I remember Steve going on pagebuf shrinking
exercises in the distant past, to fit more of em in memory at once,
I can't remember what benchmark in particular he was using though).
cheers.
--
Nathan
next prev parent reply other threads:[~2007-05-22 23:51 UTC|newest]
Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-16 3:19 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 6:06 ` 2.6.22-rc1-mm1 KAMEZAWA Hiroyuki
2007-05-16 7:58 ` 2.6.22-rc1-mm1 Jeff Garzik
2007-05-16 8:04 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 15:33 ` 2.6.22-rc1-mm1 Jeff Garzik
2007-05-16 20:24 ` 2.6.22-rc1-mm1 Darrick J. Wong
2007-05-16 16:54 ` 2.6.22-rc1-mm1 Randy Dunlap
2007-05-16 7:57 ` 2.6.22-rc1-mm1 - s390 vs. md Cornelia Huck
2007-05-16 17:21 ` Williams, Dan J
2007-05-16 10:18 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-05-16 15:16 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 17:40 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-16 17:55 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 18:18 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-05-16 18:00 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 23:32 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 23:36 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-17 9:35 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-29 22:34 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-01 9:50 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-01 23:12 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-06-05 18:38 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-05 22:57 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-06-07 9:49 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-11 13:58 ` 2.6.22-rc1-mm1 Andy Whitcroft
[not found] ` <63a08cc7547f14065becdf9a94d0d529@pinky>
2007-06-11 16:15 ` [PATCH] move the kernel to 16MB for NUMA-Q Andrew Morton
2007-06-11 17:20 ` Dave Jones
2007-06-11 17:36 ` H. Peter Anvin
2007-06-11 18:19 ` Jan Engelhardt
2007-06-11 18:46 ` Dave Jones
2007-06-11 19:17 ` Alan Cox
2007-06-11 20:07 ` Rene Herman
2007-06-11 20:21 ` Rene Herman
2007-06-11 19:01 ` H. Peter Anvin
2007-06-11 20:44 ` Jan Engelhardt
2007-06-11 20:51 ` H. Peter Anvin
2007-06-15 11:12 ` Jan Engelhardt
2007-06-11 17:49 ` Rene Herman
2007-06-11 17:58 ` H. Peter Anvin
2007-06-11 18:01 ` Rene Herman
2007-05-17 4:16 ` 2.6.22-rc1-mm1 Bharata B Rao
2007-05-18 8:54 ` 2.6.22-rc1-mm1 young dave
2007-05-18 10:07 ` 2.6.22-rc1-mm1 young dave
2007-05-18 16:54 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-18 16:59 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-21 0:53 ` 2.6.22-rc1-mm1 young dave
2007-05-21 4:49 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-21 5:00 ` 2.6.22-rc1-mm1 young dave
2007-05-21 5:03 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-21 5:39 ` 2.6.22-rc1-mm1 young dave
[not found] ` <465138CC.3060605@zytor.com>
2007-05-21 8:41 ` 2.6.22-rc1-mm1 young dave
2007-05-21 16:35 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-22 2:14 ` 2.6.22-rc1-mm1 young dave
[not found] ` <465319C1.2080206@zytor.com>
2007-05-23 1:15 ` 2.6.22-rc1-mm1 young dave
2007-05-16 12:10 ` (NFS) BUG: at page-writeback.c:829 [Was: 2.6.22-rc1-mm1] Jiri Slaby
2007-05-16 12:39 ` Nick Piggin
2007-05-16 12:44 ` Jiri Slaby
2007-05-16 12:47 ` Nick Piggin
2007-05-16 13:00 ` Trond Myklebust
2007-05-16 13:06 ` Nick Piggin
2007-05-16 12:52 ` Trond Myklebust
2007-05-16 14:30 ` 2.6.22-rc1-mm1 Michal Piotrowski
2007-05-16 14:37 ` 2.6.22-rc1-mm1 Nick Piggin
[not found] ` <6bffcb0e0705160935r1767a764hce72f24f9eee6c1e@mail.gmail.com>
2007-05-16 16:58 ` 2.6.22-rc1-mm1 Jiri Slaby
2007-05-16 15:34 ` 2.6.22-rc1-mm1 Gabriel C
2007-05-16 16:24 ` 2.6.22-rc1-mm1 Michal Piotrowski
2007-05-16 16:41 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-17 2:06 ` 2.6.22-rc1-mm1 David Chinner
2007-05-17 8:41 ` [xfs-masters] 2.6.22-rc1-mm1 Christoph Hellwig
2007-05-17 20:05 ` Michal Piotrowski
2007-05-18 2:11 ` David Chinner
2007-05-21 10:11 ` David Chinner
2007-05-21 10:23 ` Christoph Hellwig
2007-05-22 10:44 ` David Chinner
2007-05-22 11:42 ` Christoph Hellwig
2007-05-22 23:23 ` Nathan Scott [this message]
2007-05-22 14:45 ` Michal Piotrowski
2007-05-16 16:50 ` 2.6.22-rc1-mm1 Randy Dunlap
2007-05-16 17:00 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-16 17:06 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 19:55 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-16 20:00 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-18 17:34 ` 2.6.22-rc1-mm1 Edward Shishkin
2007-05-16 17:37 ` 2.6.22-rc1-mm1 [cannot change thermal trip points] Maciej Rutecki
2007-05-16 17:47 ` Chuck Ebbert
2007-05-16 18:10 ` Goulven Guillard
2007-05-17 9:23 ` Pavel Machek
2007-05-17 13:36 ` Maciej Rutecki
2007-05-17 19:08 ` Len Brown
2007-05-17 20:09 ` Maciej Rutecki
2007-05-17 20:42 ` Maciej Rutecki
2007-05-17 21:53 ` Pavel Machek
2007-05-17 22:42 ` Len Brown
2007-05-21 12:11 ` Pavel Machek
2007-06-01 2:46 ` Len Brown
2007-06-04 11:16 ` Pavel Machek
2007-05-17 19:17 ` Len Brown
2007-05-17 21:52 ` Pavel Machek
2007-05-17 22:35 ` Len Brown
2007-06-04 9:02 ` Stefan Seyfried
2007-06-04 11:06 ` Pavel Machek
2007-05-19 19:56 ` Thomas Renninger
2007-05-21 3:50 ` Len Brown
2007-05-21 11:31 ` Thomas Renninger
2007-05-21 12:10 ` Pavel Machek
2007-05-21 13:27 ` Matthew Garrett
2007-05-21 13:29 ` Pavel Machek
2007-05-21 13:36 ` Matthew Garrett
2007-05-21 13:40 ` Pavel Machek
2007-05-21 13:45 ` Matthew Garrett
2007-05-21 22:42 ` Pavel Machek
2007-05-22 0:31 ` Matthew Garrett
2007-05-22 9:06 ` Pavel Machek
2007-05-22 9:16 ` Matthew Garrett
2007-05-22 9:28 ` Goulven Guillard
2007-05-22 10:05 ` Maciej Rutecki
2007-06-04 9:13 ` Stefan Seyfried
2007-05-24 14:16 ` 2.6.22-rc1-mm1 Implementing fan/thermal control in userspace - Was: " Thomas Renninger
2007-05-24 14:36 ` Matthew Garrett
2007-05-24 18:18 ` Thomas Renninger
2007-05-25 6:38 ` Pavel Machek
2007-05-27 21:51 ` Matthew Garrett
2007-05-28 10:58 ` Pavel Machek
2007-05-28 12:50 ` Matthew Garrett
2007-05-28 12:53 ` Pavel Machek
2007-05-16 18:55 ` 2.6.22-rc1-mm1: IDE compile error Adrian Bunk
2007-05-23 23:45 ` Bartlomiej Zolnierkiewicz
2007-05-24 10:55 ` Alan Cox
2007-05-24 18:53 ` H. Peter Anvin
2007-05-25 0:05 ` H. Peter Anvin
2007-05-25 0:14 ` Alan Cox
2007-05-25 0:18 ` H. Peter Anvin
2007-05-25 0:38 ` Alan Cox
2007-05-25 0:51 ` H. Peter Anvin
2007-05-25 14:19 ` Alan Cox
2007-05-17 12:38 ` 2.6.22-rc1-mm1 - Call trace in slub_def.h Reuben Farrelly
2007-05-17 12:52 ` Satyam Sharma
2007-05-20 10:12 ` 2.6.22-rc1-mm1 Mariusz Kozlowski
2007-05-20 10:21 ` 2.6.22-rc1-mm1 Sam Ravnborg
2007-05-20 15:33 ` 2.6.22-rc1-mm1 Kumar Gala
2007-05-22 7:25 ` 2.6.22-rc1-mm1: evm BUG when reading sysfs file Joseph Fannin
2007-05-22 21:23 ` Andrew Morton
2007-05-25 21:05 ` Mimi Zohar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1179876190.6273.532.camel@edge \
--to=nscott@aconex.com \
--cc=akpm@linux-foundation.org \
--cc=dgc@sgi.com \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.k.k.piotrowski@gmail.com \
--cc=xfs-masters@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox