From: "Antonino A. Daplas" <adaplas@gmail.com>
To: Adrian McMenamin <adrianmcmenamin@gmail.com>
Cc: Adrian McMenamin <lkmladrian@gmail.com>,
linux-kernel@vger.kernel.org, lethal@users.sourceforge.net
Subject: Re: Problems with framebuffer in 2.6.22-git17
Date: Sat, 28 Jul 2007 05:43:20 +0800 [thread overview]
Message-ID: <1185572600.26603.10.camel@daplas> (raw)
In-Reply-To: <92a12cdb0707271247s727993b8i33999a9652b2ca20@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 799 bytes --]
On Fri, 2007-07-27 at 20:47 +0100, Adrian McMenamin wrote:
> On 26/07/07, Antonino A. Daplas <adaplas@gmail.com> wrote:
>
> >
> > I'm also confused. Can you change the color depth to 32 bpp ('fbset
> > -depth 32')? I'm thinking of a possible pseudo_palette overrun.
> >
>
> The code behaves in exactly the same way with the bit depth set to 32
> and without the patch reversion (ie forces a reboot).
>
> With the parch reverted there is a flicker of output on the screen
> before a reboot is forced (it will boot with 16bpp though the colour
> is a bit iffy)
>
> With the patch reverted and 24bpp, it oopses before freezing (with two
> odd looking boot logos on the screen):
Can you try the attached patch? It's just a clean-up patch: uses
framebuffer_alloc/release instead of kmalloc.
Tony
[-- Attachment #2: pvr2_cleanup.diff --]
[-- Type: text/x-patch, Size: 1638 bytes --]
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index f930026..a72921b 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -143,6 +143,7 @@ static struct pvr2fb_par {
unsigned char is_lowres; /* Is horizontal pixel-doubling enabled? */
unsigned long mmio_base; /* MMIO base */
+ u32 palette[16];
} *currentpar;
static struct fb_info *fb_info;
@@ -790,7 +791,7 @@ static int __devinit pvr2fb_common_init(
fb_info->fbops = &pvr2fb_ops;
fb_info->fix = pvr2_fix;
fb_info->par = currentpar;
- fb_info->pseudo_palette = (void *)(fb_info->par + 1);
+ fb_info->pseudo_palette = currentpar->palette;
fb_info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
if (video_output == VO_VGA)
@@ -1082,14 +1083,15 @@ #ifndef MODULE
#endif
size = sizeof(struct fb_info) + sizeof(struct pvr2fb_par) + 16 * sizeof(u32);
- fb_info = kzalloc(size, GFP_KERNEL);
+ fb_info = framebuffer_alloc(sizeof(struct pvr2fb_par), NULL);
+
if (!fb_info) {
printk(KERN_ERR "Failed to allocate memory for fb_info\n");
return -ENOMEM;
}
- currentpar = (struct pvr2fb_par *)(fb_info + 1);
+ currentpar = fb_info->par;
for (i = 0; i < ARRAY_SIZE(board_driver); i++) {
struct pvr2_board *pvr_board = board_driver + i;
@@ -1102,7 +1104,7 @@ #endif
if (ret != 0) {
printk(KERN_ERR "pvr2fb: Failed init of %s device\n",
pvr_board->name);
- kfree(fb_info);
+ framebuffer_release(fb_info);
break;
}
}
@@ -1126,7 +1128,7 @@ #ifdef CONFIG_SH_STORE_QUEUES
#endif
unregister_framebuffer(fb_info);
- kfree(fb_info);
+ framebuffer_release(fb_info);
}
module_init(pvr2fb_init);
prev parent reply other threads:[~2007-07-27 21:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-22 18:41 Problems with framebuffer in 2.6.22-git17 Adrian McMenamin
2007-07-22 21:02 ` Adrian McMenamin
2007-07-22 23:22 ` Antonino A. Daplas
[not found] ` <8b67d60707231324k28f3cd45p287418fd77feaf00@mail.gmail.com>
2007-07-23 20:35 ` Adrian McMenamin
2007-07-23 21:06 ` Paul Mundt
2007-07-24 21:45 ` Adrian McMenamin
2007-07-25 23:33 ` Antonino A. Daplas
2007-07-27 19:47 ` Adrian McMenamin
2007-07-27 20:18 ` Adrian McMenamin
2007-07-27 21:31 ` Antonino A. Daplas
2007-07-27 22:25 ` Adrian McMenamin
2007-07-27 23:22 ` Antonino A. Daplas
2007-07-28 0:32 ` Adrian McMenamin
2007-07-28 0:52 ` Antonino A. Daplas
2007-07-28 1:06 ` Adrian McMenamin
2007-07-28 2:14 ` Antonino A. Daplas
2007-07-28 2:18 ` Antonino A. Daplas
2007-07-27 21:43 ` Antonino A. Daplas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1185572600.26603.10.camel@daplas \
--to=adaplas@gmail.com \
--cc=adrianmcmenamin@gmail.com \
--cc=lethal@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lkmladrian@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox