From: Ian Kumlien <pomac@vapor.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-kernel@vger.kernel.org
Subject: Re: Cache not being reclaimed?
Date: Wed, 05 Sep 2007 15:01:37 +0200 [thread overview]
Message-ID: <1188997297.8365.21.camel@localhost> (raw)
In-Reply-To: <20070905054501.9c59dc56.akpm@linux-foundation.org>
[-- Attachment #1: Type: text/plain, Size: 3342 bytes --]
On ons, 2007-09-05 at 05:45 -0700, Andrew Morton wrote:
> > On Wed, 05 Sep 2007 03:28:07 +0200 Ian Kumlien <pomac@vapor.com> wrote:
> > Hi,
> >
> > I have just had a quite unexpected 'low memory situation'...
> >
> > This is a AMD64 machine with 2 gig memory, running 64 bit userland.
> >
> > Kernel: 2.6.23-rc3-git10, updating to -rc5-* as soon as i can.
> > I'm using SLUB:s
> >
> >
> > To me, this looks odd... I thought that any cached memory would be
> > reclamed but it was always full.
> >
> > Ideas?
> >
> > One example from dmesg:
> > swapper: page allocation failure. order:1, mode:0x4020
> >
> > Call Trace:
> > <IRQ> [<ffffffff8026c7ef>] __alloc_pages+0x30f/0x330
> > [<ffffffff8028a0a1>] __slab_alloc+0x141/0x590
> > [<ffffffff805a5937>] __netdev_alloc_skb+0x17/0x40
> > [<ffffffff805a5937>] __netdev_alloc_skb+0x17/0x40
> > [<ffffffff8028b470>] __kmalloc_track_caller+0xa0/0xc0
> > [<ffffffff805a4b3f>] __alloc_skb+0x6f/0x150
> > [<ffffffff805a5937>] __netdev_alloc_skb+0x17/0x40
> > [<ffffffff88010945>] :sky2:sky2_rx_alloc+0x25/0xf0
> > [<ffffffff88013b0c>] :sky2:sky2_poll+0x6dc/0xcf0
> > [<ffffffff805e5f60>] tcp_delack_timer+0x0/0x210
> > [<ffffffff805ac38a>] net_rx_action+0x8a/0x140
> > [<ffffffff80242ac9>] __do_softirq+0x69/0xe0
> > [<ffffffff8020cd9c>] call_softirq+0x1c/0x30
> > [<ffffffff8020eb75>] do_softirq+0x35/0x90
> > [<ffffffff8020ede0>] do_IRQ+0x80/0x100
> > [<ffffffff8020ad00>] default_idle+0x0/0x40
> > [<ffffffff8020c121>] ret_from_intr+0x0/0xa
> > <EOI> [<ffffffff8020ad29>] default_idle+0x29/0x40
> > [<ffffffff8020ade1>] cpu_idle+0xa1/0xf0
> >
>
> An order-1 GFP_ATOMIC allocation can fail, and networking should recover
> from it.
Well, this isn't only networking, It started with all the apps running
and ended up with a pretty basic desktop with almost nothing running...
(due to continued freezes that caused me to shut down more and more
programs)
> If this is happening a lot then someting might have been broken. Do you
> have reason to believe that the frequency of this happening has inreased?
I have never, to my knowledge, had this happen before...
I just happened to start a few downloads with rtorrent and watched the
machine slow down to a crawl... All this with over a gig in cache.
The machine was actually deadlocked for almost a minute at one time.
Top memory usage:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2395 pomac 20 0 440m 289m 238m S 2 14.4 32:56.54 rtorrent
21647 root 20 0 203m 120m 10m S 1 6.0 569:45.31 X
2351 pomac 20 0 170m 111m 53m S 0 5.5 15:43.66 rtorrent
At peak time, one of the rtorrent processes consumed more, but i still
had 1.x gig as cache, which imho should have been reclaimed.
vmstat now:
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 365204 16628 30644 1445316 2 1 362 92 18 21 4 2 91 3
PS. I have a dmesg dump from the incident, it's not long enough to
contain all but it could be seen as a snapshot...
DS.
--
Ian Kumlien <pomac () vapor ! com> -- http://pomac.netswarm.net
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
prev parent reply other threads:[~2007-09-05 13:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-05 1:28 Cache not being reclaimed? Ian Kumlien
2007-09-05 12:45 ` Andrew Morton
2007-09-05 13:01 ` Ian Kumlien [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1188997297.8365.21.camel@localhost \
--to=pomac@vapor.com \
--cc=Linux-kernel@vger.kernel.org \
--cc=akpm@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox