From: Ian Kumlien <pomac@vapor.com>
To: Linux-kernel@vger.kernel.org
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Subject: [BUG] sky2 errors in 2.6.23-rc9-git1
Date: Wed, 03 Oct 2007 02:42:09 +0200 [thread overview]
Message-ID: <1191372129.26233.12.camel@localhost> (raw)
[-- Attachment #1: Type: text/plain, Size: 2603 bytes --]
Hi,
Sorry about this but the latest sky2 seems damned odd.
I have been running with jumbo frames at home for quite some time but
with this kernel that doesn't work, i instead get loads of:
sky2 eth0: rx length error: status 0x5e60500 length 1510
sky2 eth0: rx length error: status 0x5e60500 length 1510
sky2 eth0: rx length error: status 0x5ea0500 length 1514
sky2 eth0: rx length error: status 0x5ea0500 length 1514
Where length can be just about anything from 800 -> MTU
That is not enough though, i also, for some reason, got several hangs:
sky2 eth0: hung mac 0:68 fifo 143 (133:76)
sky2 eth0: receiver hang detected
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
sky2 eth0: hung mac 0:125 fifo 195 (93:88)
sky2 eth0: receiver hang detected
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
sky2 eth0: hung mac 0:124 fifo 98 (10:108)
sky2 eth0: receiver hang detected
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
sky2 eth0: hung mac 0:41 fifo 30 (187:17)
sky2 eth0: receiver hang detected
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control rx
...
All during about 2 minutes.
Could this be related to [sky2: sky2 FE+ receive status workaround]:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blobdiff;f=drivers/net/sky2.c;h=a3de0b6127ebb537b87a1849e207909fcc333ee4;hp=0792031a5cf959a1543f32f4e0f2ab4ccb7b0ec2;hb=3b12e0141f7a97c3b84731b5f935ed738bb6f960;hpb=ff0ce6845bc18292e80ea40d11c3d3a539a3fc5e
The chips being used are:
sky2 0000:02:00.0: v1.18 addr 0xdbffc000 irq 17 Yukon-EC (0xb6) rev 2
sky2 0000:02:00.0: v1.18 addr 0xfddfc000 irq 17 Yukon-EC (0xb6) rev 1
The receiver hang only happes on the REV 2 chip, which also reports:
sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode.
Ifconfig reports:
REV 2 chip:
RX packets:30492 errors:0 dropped:646 overruns:0 frame:646
TX packets:29229 errors:0 dropped:0 overruns:0 carrier:0
REV 1 chip:
RX packets:19795 errors:0 dropped:131 overruns:0 frame:131
TX packets:18588 errors:0 dropped:0 overruns:0 carrier:0
Let me know when jumbo frames work again, just mail me patches =)
(to tired to look in to it closer atm)
--
Ian Kumlien <pomac () vapor ! com> -- http://pomac.netswarm.net
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2007-10-03 0:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-03 0:42 Ian Kumlien [this message]
2007-10-03 1:02 ` [PATCH] sky2: jumbo frame regression fix Stephen Hemminger
2007-10-03 1:07 ` Jeff Garzik
2007-10-03 4:53 ` Stephen Hemminger
2007-10-03 4:58 ` Jeff Garzik
2007-10-03 1:34 ` Ian Kumlien
2007-10-03 4:59 ` Stephen Hemminger
2007-10-03 7:37 ` Ian Kumlien
2007-10-03 8:29 ` iank
2007-11-27 22:40 ` [SKY2] Problems (2.6.24-rc3-git1) Ian Kumlien
2007-11-27 22:57 ` Stephen Hemminger
2007-11-27 23:07 ` Ian Kumlien
2007-10-03 18:04 ` [PATCH] sky2: jumbo frame regression fix Bill Davidsen
2007-10-03 18:28 ` Ian Kumlien
2007-10-03 17:39 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1191372129.26233.12.camel@localhost \
--to=pomac@vapor.com \
--cc=Linux-kernel@vger.kernel.org \
--cc=shemminger@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox