From: Glauber de Oliveira Costa <gcosta@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, rusty@rustcorp.com.au, ak@suse.de,
mingo@elte.hu, chrisw@sous-sol.org, jeremy@goop.org,
avi@qumranet.com, anthony@codemonkey.ws,
virtualization@lists.linux-foundation.org, lguest@ozlabs.org,
kvm-devel@lists.sourceforge.net, zach@vmware.com,
tglx@linutronix.de, jun.nakajima@intel.com, glommer@gmail.com,
Glauber de Oliveira Costa <gcosta@redhat.com>,
Steven Rostedt <rostedt@goodmis.org>
Subject: [PATCH 6/7] consolidate apic.h functions
Date: Wed, 31 Oct 2007 16:13:18 -0300 [thread overview]
Message-ID: <11938580331218-git-send-email-gcosta@redhat.com> (raw)
In-Reply-To: <11938580272819-git-send-email-gcosta@redhat.com>
This patch consolidates apic.h functions for i386 and x86_64.
notice that we use u32 to be explicit about sizing requirements
between them
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
---
arch/x86/kernel/smpboot_64.c | 10 ++++++++--
include/asm-x86/apic.h | 38 ++++++++++++++++++++++++++++++++++++++
include/asm-x86/apic_32.h | 31 -------------------------------
include/asm-x86/apic_64.h | 14 --------------
4 files changed, 46 insertions(+), 47 deletions(-)
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
index ecd00f6..53db29d 100644
--- a/arch/x86/kernel/smpboot_64.c
+++ b/arch/x86/kernel/smpboot_64.c
@@ -370,7 +370,7 @@ void __cpuinit start_secondary(void)
unlock_ipi_call_lock();
- setup_secondary_APIC_clock();
+ setup_secondary_clock();
cpu_idle();
}
@@ -462,6 +462,12 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta
num_starts = 2;
/*
+ * Paravirt wants a startup IPI hook here to set up the
+ * target processor state.
+ */
+ startup_ipi_hook(phys_apicid, (unsigned long) start_rip,
+ (unsigned long) init_rsp);
+ /*
* Run STARTUP IPI loop.
*/
Dprintk("#startup loops: %d.\n", num_starts);
@@ -903,7 +909,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
* Set up local APIC timer on boot CPU.
*/
- setup_boot_APIC_clock();
+ setup_boot_clock();
}
/*
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
index 9fbcc0b..6f61672 100644
--- a/include/asm-x86/apic.h
+++ b/include/asm-x86/apic.h
@@ -1,5 +1,43 @@
+#ifndef _X86_APIC_H_
+#define _X86_APIC_H_
+#include <asm/apicdef.h>
+#include <asm/fixmap.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * Basic functions accessing APICs.
+ */
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define apic_write(reg, v) native_apic_write(reg, v)
+#define apic_write_atomic(reg, v) native_apic_write_atomic(reg, v)
+#define apic_read(reg) native_apic_read(reg)
+#define setup_boot_clock setup_boot_APIC_clock
+#define setup_secondary_clock setup_secondary_APIC_clock
+#endif
+static __inline fastcall void native_apic_write(unsigned long reg,
+ u32 v)
+{
+ *((volatile u32 *)(APIC_BASE+reg)) = v;
+}
+
+static __inline fastcall void native_apic_write_atomic(unsigned long reg,
+ u32 v)
+{
+ xchg((volatile unsigned long *)(APIC_BASE+reg), v);
+}
+
+static __inline fastcall u32 native_apic_read(unsigned long reg)
+{
+ return *((volatile u32 *)(APIC_BASE+reg));
+}
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
#ifdef CONFIG_X86_32
# include "apic_32.h"
#else
# include "apic_64.h"
#endif
+#endif
diff --git a/include/asm-x86/apic_32.h b/include/asm-x86/apic_32.h
index 4091b33..dbe51b4 100644
--- a/include/asm-x86/apic_32.h
+++ b/include/asm-x86/apic_32.h
@@ -34,37 +34,6 @@ extern int apic_verbosity;
extern void generic_apic_probe(void);
#ifdef CONFIG_X86_LOCAL_APIC
-
-/*
- * Basic functions accessing APICs.
- */
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define apic_write native_apic_write
-#define apic_write_atomic native_apic_write_atomic
-#define apic_read native_apic_read
-#define setup_boot_clock setup_boot_APIC_clock
-#define setup_secondary_clock setup_secondary_APIC_clock
-#endif
-
-static __inline fastcall void native_apic_write(unsigned long reg,
- unsigned long v)
-{
- *((volatile unsigned long *)(APIC_BASE+reg)) = v;
-}
-
-static __inline fastcall void native_apic_write_atomic(unsigned long reg,
- unsigned long v)
-{
- xchg((volatile unsigned long *)(APIC_BASE+reg), v);
-}
-
-static __inline fastcall unsigned long native_apic_read(unsigned long reg)
-{
- return *((volatile unsigned long *)(APIC_BASE+reg));
-}
-
void apic_wait_icr_idle(void);
unsigned long safe_apic_wait_icr_idle(void);
int get_physical_broadcast(void);
diff --git a/include/asm-x86/apic_64.h b/include/asm-x86/apic_64.h
index 2747a11..aaba5af 100644
--- a/include/asm-x86/apic_64.h
+++ b/include/asm-x86/apic_64.h
@@ -34,20 +34,6 @@ extern int disable_apic_timer;
struct pt_regs;
-/*
- * Basic functions accessing APICs.
- */
-
-static __inline void apic_write(unsigned long reg, unsigned int v)
-{
- *((volatile unsigned int *)(APIC_BASE+reg)) = v;
-}
-
-static __inline unsigned int apic_read(unsigned long reg)
-{
- return *((volatile unsigned int *)(APIC_BASE+reg));
-}
-
extern void apic_wait_icr_idle(void);
extern unsigned int safe_apic_wait_icr_idle(void);
--
1.4.4.2
next prev parent reply other threads:[~2007-10-31 22:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-31 19:13 [PATCH 0/7] (Re-)introducing pvops for x86_64 - Consolidation part Glauber de Oliveira Costa
2007-10-31 19:13 ` [PATCH 1/7] irqflags consolidation Glauber de Oliveira Costa
2007-10-31 19:13 ` [PATCH 2/7] consolidate spinlock.h Glauber de Oliveira Costa
2007-10-31 19:13 ` [PATCH 3/7] tlb functions consolidation Glauber de Oliveira Costa
2007-10-31 19:13 ` [PATCH 4/7] smp x86 consolidation Glauber de Oliveira Costa
2007-10-31 19:13 ` [PATCH 5/7] Add debugreg/load_rsp native hooks Glauber de Oliveira Costa
2007-10-31 19:13 ` Glauber de Oliveira Costa [this message]
2007-10-31 19:13 ` [PATCH 7/7] consolidate msr.h Glauber de Oliveira Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11938580331218-git-send-email-gcosta@redhat.com \
--to=gcosta@redhat.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=anthony@codemonkey.ws \
--cc=avi@qumranet.com \
--cc=chrisw@sous-sol.org \
--cc=glommer@gmail.com \
--cc=jeremy@goop.org \
--cc=jun.nakajima@intel.com \
--cc=kvm-devel@lists.sourceforge.net \
--cc=lguest@ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rostedt@goodmis.org \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
--cc=virtualization@lists.linux-foundation.org \
--cc=zach@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox